Kärcher Clipper 12 Le manuel du propriétaire

86401560-B 06/02/15

Clipper 12

Carpet Extractor

Operating Instructions (ENG)

MODELS: CLP12

1.008-025.0

From Serial Number (Ref No1*)

*See Serial Number Page in Spare

Parts List or call manufacturer

Warranty Registration

Thank you for purchasing a Kärcher North America product. Warranty registration is quick

and easy. Your registration will allow us to serve you better over the lifetime of the product.

To register your product go to :

http://warranty.karcherna.com/

For customer assistance:

1-800-444-7654

2 86401560 Operators Manual - Clipper 12 115V

Machine Data Label

This carpet extractor is an electrical powered, portable carpet extractor intended for commercial use. The

appliance sprays a cleaning solution onto the carpet agitates the wet carpet, and then extracts the soiled solution

back into the unit's recovery tank. The appliance is fitted with and a hand tool for cleaning upholstery and stairs.

3

Table of Contents

Machine Data Label. . . . . . . . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .3

How To Use This Manual . . . . . . . . . . . . . . . . . . . . .4

Safety

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . .5

HAZARD INTENSITY LEVEL. . . . . . . . . . . . . . . . . .7

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Grounding Instructions . . . . . . . . . . . . . . . . . . . . . .10

Operations

Technical Specifications . . . . . . . . . . . . . . . . . . . . .12

Components / Controls Locations. . . . . . . . . . . . . .14

Filling the Clipper . . . . . . . . . . . . . . . . . . . . . . . . . .17

Machine Operation . . . . . . . . . . . . . . . . . . . . . . . . .19

Cleaning Procedure . . . . . . . . . . . . . . . . . . . . . . . .21

Accessory Tool Usage . . . . . . . . . . . . . . . . . . . . . .24

Maintenance

Service Schedule . . . . . . . . . . . . . . . . . . . . . . . . . .25

Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . .26

Daily / Regular Maintenance . . . . . . . . . . . . . . . . .26

Vacuum Motor Replacement . . . . . . . . . . . . . . . . .27

Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . . .28

Solution Pump Replacement . . . . . . . . . . . . . . . . .29

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . . .31

86401560 Operators Manual - Clipper 12 115V

4

How To Use This Manual

This manual contains the following sections:

• How to Use This Manual

•Safety

• Operations

• Maintenance

• Suggested Spare Parts

The HOW TO USE THIS MANUAL section will tell you

how to find important information for ordering correct

repair parts.

Parts may be ordered from authorized dealers. When

placing an order for parts, the machine model and

machine serial number are important. Refer to the

MACHINE DATA box which is filled out during the

installation of your machine. The MACHINE DATA box

is located on the inside of the front cover of this manual.

The model and serial number of your machine is

located on the back of the machine.

The SAFETY section contains important information

regarding hazardous or unsafe practices of the

machine. Levels of hazards are identified that could

result in product damage, personal injury, or severe

injury resulting in death.

The OPERATIONS section is to familiarize the operator

with the operation and function of the machine.

The MAINTENANCE section contains preventive main-

tenance to keep the machine and its components in

good working condition. They are listed in this general

order:

•Periodic

• Daily / Regular

• Troubleshooting

NOTE: If a service or option kit is installed on your

machine, be sure to keep the KIT INSTRUCTIONS

which came with the kit. It contains replacement parts

numbers needed for ordering future parts.

NOTE: The manual part number is located on the

lower right corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

86401560 Operators Manual - Clipper 12 115V

5

Safety

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Connect to a properly grounded outlet. See Grounding Instructions.

Do not leave the machine unattended. Unplug machine from outlet when not in use and before maintenance or

service.

Use only indoors. Do not use outdoors or expose to rain.

Do not allow machine to be used as a toy. Close attention is necessary when used by or near children.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

Do not use damaged electrical cord or plug. Follow all instructions in this manual concerning grounding the

machine. If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into

water, return it to an authorized service center.

Do not pull or carry machine by electrical cord, use as a handle, close a door on cord, or pull cord around sharp

edges or corners.

Do not run machine over cord. Keep cord away from heated surfaces.

Do not unplug machine by pulling on cord. To unplug, grasp the electrical plug, not the electrical cord.

Do not handle the electrical plug or machine with wet hands.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine is intended for cleaning carpet only.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

This machine is not suitable for picking up health endangering dust.

Turn off all controls before unplugging.

Do not operate this machine near flammable fluids, dust or vapors.

Maintenance and repairs must be done by qualified personnel.

If foam or liquid comes out of machine, switch off immediately.

READ AND SAVE THESE INSTRUCTIONS

86401560 Operators Manual - Clipper 12 115V

6

Safety

IMPORTANTES MESURES DE SÉCURITÉ

L’utilisation d’un appareil électrique demande certaines précautions:

LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER (CET APPAREIL).

Pour réduire le risque d'incendie, d'électrocution ou de

blessure :

Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilisé et

avant l’entretien.

Pour reduire les risques de choc electrique, ne pas utiliser à l exterieur et ne pas aspirer de matières humides.

Ne pas permettre aux enfants de jouer avec l’appareil. Une attention particulière est nécessaire lorsque l’appareil

est utilisé par des enfants ou à proximité de ces derniers.

Utiliser cet appareil conformément aux instructions du présent manuel uniquement. N'utiliser que les

composantset les accessoires conseillés par le fabricant.

Ne pas utiliser si le cordon ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne

fonctionne pas bien, s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.

Ne pas tirer soulever ou traîner l’appareil par le cordon. Ne pas utiliser le cordon comme une poignée, le coincer

dans l’embrasure d’unée porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler l’appareil sur

le cordon.

Garder le cordon à l’écart des surfaces chaudes.

Ne pas débrancher en tirant sur le cordon. Tirer plutôt la fiche.

Ne pas toucher la fiche ou l’appareil lorsque vos mains sont humides.

N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée. S’assure

que de la poussière, de la peluche, des cheveux ou d’autres matières ne réduisent pas le débit d’air.

Cette machine est destinée pour nettoyer le tapis seulement.

Ne pas aspirer de matiéres en combustion ou qui dégagent de la fumée, comme des cigarettes, des allumettes ou

des cendres chaudes.

Cette machine n’est pas adaptée au ramassage de poussières dangereuses.

Mettre toutes les commandes à la position ARRÊT avant de débrancher l’appareil.

Ne as aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans

des endroits où peuvent se trouver de tels liquides.

L’entretien et les réparations de la machine doivent être effectuées par un personnel qualifié.

Si de la mousse ou du liquide sort de la machine, la mettre hors tension immédiatement.

CONSERVER CES INSTRUCTIONS

86401560 Operators Manual - Clipper 12 115V

7

Safety

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY.

The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating

condition. Following is information that signals some potentially dangerous conditions to the operator or the equip-

ment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the

machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine.

Use manufacturer approved replacement parts.

86401560 Operators Manual - Clipper 12 115V

8

Safety

Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions :

NIVEAU D'INTENSITÉ DU DANGER

Il existe trois niveaux d'intensité du danger, identifiés par des termes d'avertissement - AVERTISSEMENT,

ATTENTION et POUR VOTRE SÉCURITÉ. Le niveau d'intensité du danger est déterminé par les définitions

suivantes :

AVERTISSEMENT - Les dangers ou des pratiques contraires à la sécurité qui POURRAIENT entraîner des

blessures personnelles ou la mort.

ATTENTION - Les dangers ou des pratiques contraires à la sécurité qui pourraient entraîner des blessures person-

nelles légères ou des dégâts sur le produit ou d'autres biens.

POUR DES RAISONS DE SÉCURITÉ : Pour identifier les actions qui doivent être exécutées pour un fonc-

tionnement sûr de l'équipement.

Signaler immédiatement tout dommage subi par la machine ou fonctionnement défectueux. Ne pas utiliser la

machine si elle ne fonctionne pas correctement. Ci-dessous se trouvent les informations indiquant les conditions

potentiellement dangereuses pour l'opérateur ou l'équipement. Lire attentivement ces informations. Être conscient

que ces conditions peuvent survenir. Repérer tous les dispositifs de sécurité sur la machine. Suivre les étapes

nécessaires de formation du personnel qui utilise la machine.

POUR DES RAISONS DE SÉCURITÉ :

NE PAS FAIRE FONCTIONNER LA MACHINE :

Sauf si le personnel est formé et autorisé.

Sauf si le manuel d'utilisation est lu et compris.

Dans des zones inflammables ou explosives.

Dans des zones contenant des objets susceptibles de tomber

LORS DE L'ENTRETIEN DE LA MACHINE :

Éviter les pièces mobiles. Ne pas porter de vêtements, vestes, chemises ou manches vagues lors de l'entretien de

la machine. Utiliser les pièces de rechange approuvées par le fabricant.

86401560 Operators Manual - Clipper 12 115V

9

Safety

Safety Labels

NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become

illegible, promptly replace them.

EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉ

REMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment,

les étiquettes deviennent illisibles, contactez votre représentant autorisé pour un remplacement rapid

86242230

Warning Label

86401560 Operators Manual - Clipper 12 115V

10

Safety

Electrical

In the USA, this machine operates on a standard 15

amp 115V, 60 Hz, A.C. power circuit. The amp, hertz,

and voltage are listed on the data label found on each

machine. Using voltages above or below those

indicated on the data label will cause serious damage

to the motors.

Extension Cords

If an extension cord is used, the wire size must be at

least one size larger than the power cord on the

machine, and must be limited to 50 feet (15.5m) in

length.

Grounding Instructions

This appliance must be grounded. If it should

malfunction or break down, grounding provides a path

of least resistance for electric current to reduce the risk

of electric shock. This appliance is equipped with a

cord having an equipment-grounding conductor and

grounding plug. The plug must be inserted into an

appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

This appliance is for use on a nominal 120-volt circuit,

and has a grounded plug that looks like the plug in “Fig.

A”. A temporary adapter that looks like the adapter in

“Fig. C” may be used to connect this plug to a 2-pole

receptacle as shown in “Fig. B”, if a properly grounded

outlet is not available. The temporary adapter should

be used only until a properly grounded outlet (Fig. A)

can be installed by a qualified electrician. The green

colored rigid ear, lug, or wire extending from the

adapter must be connected to a permanent ground

such as a properly grounded outlet box cover.

Whenever the adapter is used, it must be held in place

by a metal screw.

Improper connection of the equipment-

grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or service

person if you are in doubt as to whether the outlet

is properly grounded. Do not modify the plug

provided with the appliance - if it will not fit the

outlet; have a proper outlet installed by a qualified

electrician.

Le raccordement incorrect du conducteur de terre

d'équipement peut entraîner des risques d'électro-

cution. Vérifiez auprès d'un électricien qualifié ou

d'un responsable de l'entretien si vous avez

quelque doute que ce soit quant au raccordement à

la terre de votre prise murale. Ne modifiez pas la

fiche fournie avec l'appareil : si elle ne correspond

pas à la prise murale, faites installer une prise

adéquate par un électricien qualifié. Utilisez-le

uniquement sur des réceptacles protégés GFCI.

USING AN ADAPTOR

GROUNDING CONNECTION

Note: Adaptors are not allowed in Canada.

Outlet

Tab for Grounding

Outlet Box

FIGURE C

Grounded

FIGURE A

Adaptor

Screw

FIGURE B

Adaptor

Metal Screw

Grounded

Grounding Pin

86401560 Operators Manual - Clipper 12 115V

11

Notes

86401560 Operators Manual - Clipper 12 115V

12

Operations

Technical Specifications

ITEM MEASURE

Weight 105 lbs (48 kg)

Length 28 inches (71 cm)

Height 46 inches (117 cm)

Width 24 inches (61 cm)

Wheels 2x 10 inch dia. (25 cm) wheels by 2 inches

Solution Spray 2 Quick Change Jets

Power Cable 50 ft (12.7 m) (14 gauge)

Vacuum Shoe 20 inches (51 cm) cast aluminum with spring loaded down pressure

Electrical 115V, 15 A, 60 Hz

Electrical Vacuum Motor 3 stage, 1 hp, 99 cfm (2.80 cubic meters/min.), Waterlift 117 inches (297 cm)

Brush 18 inches (45.7 cm)

Brush Speed 1000 rpm

Solution Pump 100 PSI, Diaphragm style, Internal bypass

Solution Capacity 12 gallons (45.5 ltr)

Recovery Capacity 12 gallons (45.5 ltr)

86401560 Operators Manual - Clipper 12 115V

13

Operations

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure

that they do not play with the appliance.

Cet appareil n'est pas prévu à l'usage des personnes (enfants y compris) avec des possibilités physiques, sensori-

elles ou mentales réduites, ou le manque d'expérience et de connaissance, à moins qu'ils aient été donnés la

surveillance ou l'instruction au sujet de l'utilisation de l'appareil par une personne chargée de leur sûreté. Des

enfants devraient être dirigés pour s'assurer qu'ils ne jouent pas avec l'appareil.

86401560 Operators Manual - Clipper 12 115V

14

Operations

Components / Controls Locations

1. Main Handle. Used to pull and maneuver

machine.

2. Handle Adjustment. Used to adjust height of

handle, and allow machine to be used in "PUSH"

or "PULL orientation.

3. Electrical Cord.

4. Solution Switch. Turns on pump. Continuous

position (bottom) activates electro-valve to

dispense solution to floor through jets. Intermittent

position (up) requires operator to depress 1 of 3

trigger switches to dispense solution. Center

position is off.

5. Brush Motor Switch. Turns on brush motor.

6. Vacuum Motor Switch. Turns on vacuum motor.

7. Trigger Switches. Activates electro-valve to

dispense solution to floor through jets when

solution switch is in the intermittent position.

8. Brush Motor Circuit Breaker. 6 amp. Breaker

protecting brush motor.

9. Vacuum Motor Circuit Breaker. 15 amp. Breaker

protecting vacuum motor.

10. Recovery Dump Hose. Facilitates draining dirty

cleaning solution.

86401560 Operators Manual - Clipper 12 115V

15

Operations

Components

1. Solution Accessory Tool Hookup. Used for

various auxiliary cleaning tools.

2. Vacuum Hose Door. Used to connect various

auxiliary 1 ½ inch cleaning tool vacuum hoses.

3. Brush Height Adjustment. Used to regulate

brush height from storage position to various

carpet heights.

4. Recovery Tank. Used to collect dirty cleaning

solution.

5. Solution Tank. Used to hold cleaning solution.

6. Solution Dump Hose. Facilitates draining excess

cleaning solution from solution tank.

7. Recovery Tank Dome.

8. Solution Tank Lid.

9. Solution Tank Fill Hose.

10. Vacuum Shoe.

11. Brush Housing.

12. Front Lifting Handle.

13. Cleaning Solution Filter.

86401560 Operators Manual - Clipper 12 115V

16

Operations

Components

1. Solution Intake Cover.

2. Vacuum Intake Cover.

3. Float Shut-Off.

4. Clean-Out Opening.

5. Pour Spout.

6. Lift Handle.

86401560 Operators Manual - Clipper 12 115V

17

Operations

Filling the Clipper

NOTE: Use clean bucket of water to fill solution tank.

Do not put defoamer, solvents, spotter or prespray chemicals in the solution tank.

Do not allow water to spill into vacuum motor inlet. Dry spillage from top of solution tank before replacing

recovery tank.

Ne pas mettre d’antimousse, de solvants, de détacheur ou de produits chimiques de prépulvérisation dans

le réservoir à solution.

Ne pas laisser l’eau se déverser dans l’entrée du moteur de l’aspirateur. Essuyer tout écoulement dans le

haut du réservoir à solution avant de remettre le réservoir de récupération en place.

* Product Trademark Names

Suitable Chemicals Non-Compatible Chemicals

Alkalis Aldehydes

Detergents Aromatic Hydrocarbons

Hydroxides SP Butyls

Soaps Carbon Tetrachloride

Vinegar Clorox*

Chlorinated Bleaches

Chlorinated Hydrocarbons

Lysol*

Methyl Ethel Ketone (MEK)

Perchorethylene (perc)

Phenolics

Trichlorethylene

D-Limonene

86401560 Operators Manual - Clipper 12 115V

18

Operations

1. Remove electrical cord and literature from recovery

tank.

2. Remove solution tank lid.

3. Fill the solution tank with 12 gallons (45.5 ltr) of

water, that is no more than 140°F (60°C).

4. Add 12oz-24oz (356ml - 711ml) of cleaning

chemical.

86401560 Operators Manual - Clipper 12 115V

19

Operations

5. Replace solution tank lid.

Machine Operation

1. Plug cord into grounded outlet.

NOTE: Be sure dome is seated on recovery tank, and

float shut-off is installed correctly.

2. Adjust brush to proper setting.

NOTE: For good operation the brush must skim the

carpet. If circuit breaker trips raise brush to prevent

damage to motor or carpet.

3. Turn on brush and vacuum motor switches

("ON"="I"). Turn on solution switch for continuous

spray or set switch to intermittent to allow use of

trigger switches.

86401560 Operators Manual - Clipper 12 115V

20

Operations

4. Adjust handle to comfortable operating position.

Tip machine back by main handle to move to

starting point.

5. Lower machine to floor.

6. Select continuous setting to start solution spray or

select intermittent setting to enable use of trigger

switches to start solution spray.

The intermittent setting requires the operator to

hold any one of the three trigger switches in the

"on" position with the fingers, and is typically used

in small areas where short cleaning passes are

made.

The continuous setting allows the operator to set

the switch in the "on" position with one touch, and

is typically used in large areas where long cleaning

passes are made.

7. This machine can be operated in either direction.

a. For smaller areas operate the machine by pulling

rearward.

b. For larger unobstructed areas, flip the handle and

use the machine's brush assisted propelling

motion.

86401560 Operators Manual - Clipper 12 115V

La page charge ...

Kärcher Clipper 12 Le manuel du propriétaire

Ce manuel convient également à

Kärcher Clipper 12 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents