Get Started with the Tapo App
Note: Unused plugs should be rmly capped with the
included weather-resistant cover.
2. Power Up & Set Up
Power up your plug and
open the Tapo app. Tap
the button and follow
the app instructions to
complete setup.
This is a Matter-certied device. You can integrate it into
any Matter ecosystem you prefer for easy control.
A Matter-supported controller and smart home app of the
same ecosystem are required.
1. Turn on Bluetooth on your phone.
2. Open your selected smart home app and scan the
provided Matter QR code on your device.
3. Follow the instructions in the app to complete setup.
How to Set Up
Note: Setup processes may vary between ecosystems.
Set Up with Matter
For technical support, user guides, and other
information, visit https://www.tapo.com/support
Failed to Set Up?
1. Try to connect your phone to a stable 2.4 GHz
Wi-Fi network with internet access instead of a
5 GHz network.
2. Unplug your device and plug it back in to restart.
3. Refer to the FAQ for detailed instructions:
https://www.tp-link.com/support/faq/3520/
Warning
Mount vertically with the receptacles facing downward, at least 1 ft
above the ground. For outdoor usage, use this product with GFCI
outlet.
MISE EN GARDE
Montez verticalement avec les prises orientées vers le bas et à au
moins 1 pieds au-dessus du sol. Pour une utilisation en extérieur,
utilisez ce produit avec une prise GFCI.
1. Download Tapo App
Get the Tapo app from
the App Store or Google
Play.