De Dietrich DFP127ADS-02 Le manuel du propriétaire

DFP127ADW

DFP127ADS

PART Ⅰ: Generic Version

SAFETY INFORMATION

3

CONTENTS

PRODUCT OVERVIEW

8

USING YOUR DISHWASHER

Loading The Salt Into The Softener

9

MAINTENANCE AND CLEANING

External Care

Internal Care

Caring For The Dishwasher

11

14

NOTE:

Reviewing the section on troubleshooting Tips will help you solve some

common problems by yourself.

If you cannot solve the problems by yourself, please ask for help from a

professional technician.

The manufacturer, following a policy of constant development and updating of

the product, may make modifications without giving prior notice.

If lost or out-of-date, you can receive a new user manual from the manufacturer

or responsible vendor.

INSTALLATION INSTRUCTION

About Power Connection

Water Supply And Drain

Connection Of Drain Hoses

Position The Appliance

Free Standing Installation

Built-In Installation(for the integrated model)

15

16

17

18

TROUBLESHOOTING TIPS

24

LOADING THE BASKETS

28

19

SAFETY INFORMATION

WARNING

When using your dishwasher, follow the

precautions listed below:

Installation and repair can only be carried out by a

qualified technician

This appliance is intended to be used in household

and similar applications such as:

-staff kitchen areas in shops, offices and other

working environments;

-farm houses;

-by clients in hotels, motels and other residential type

environments;

-bed and breakfast type environments.

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be done by children

without supervision. (For EN60335-1)

This appliance is not intended for use by persons

(including children ) with reduced physical, sensory or

3

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a

person responsible for their safety. (For IEC60335-1 )

Packaging material could be dangerous for children!

This appliance is for indoor household use only.

To protect against the risk of electrical shock, do not

immerse the unit, cord or plug in water or other liquid.

Please unplug before cleaning and performing

maintenance on the appliance.

Use a soft cloth moistened with mild soap, and then

use a dry cloth to wipe it again.

Earthing Instructions

4

This appliance must be earthed. In the event of a

malfunction or breakdown, earthing will reduce the

risk of an electric shock by providing a path of least

resistance of electric current. This appliance is

equipped with an earthing conductor plug.

The plug must be plugged into an appropriate

outlet that is installed and earthed in accordance

with all local codes and ordinances.

Improper connection of the equipment-earthing

conductor can result in the risk of an electric shock.

Check with a qualified electrician or service

representative if you are in doubt whether the

appliance is properly grounded.

Do not modify the plug provided with the

appliance; If it does not fit the outlet.

Have a proper outlet installed by a qualified

electrician.

Do not abuse, sit on, or stand on the door or dish

rack of the dishwasher.

Do not operate your dishwasher unless all enclosure

panels are properly in place.

Open the door very carefully if the dishwasher is

operating, there is a risk of water squirting out.

Do not place any heavy objects on or stand on the

door when it is open. The appliance could tip

forward.

When loading items to be washed:

1) Locate sharp items so that they are not likely to

damage the door seal;

2) Warning: Knives and other utensils with sharp

points must be loaded in the basket with their

points facing down or placed in a horizontal

position.

Some dishwasher detergents are strongly alkaline.

They can be extremely dangerous if swallowed.

Avoid contact with the skin and eyes and keep

children away from the dishwasher when the door

is open.

Check that the detergent powder is empty after

completion of the wash cycle.

5

6

Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent.

For unmarked plastic items not so marked, check the

manufacturer's recommendations.

Use only detergent and rinse agents recommended for

use in an automatic dishwasher.

Never use soap, laundry detergent, or hand washing

detergent in your dishwasher.

The door should not be left open, since this could

increase the risk of tripping.

If the supply cord is damaged, it must be replaced by

the manufacturer or its service agent or a similarly

qualified person in order to avoid a hazard.

During installation, the power supply must not be

excessively or dangerously bent or flattened.

Do not tamper with controls.

The appliance needs to be connected to the main

water valve using new hose sets. Old sets should not be

reused.

To save energy, in stand by mode, the appliance will

switch off automatically while there is no any operation

in 15 minutes.

The maximum number of place settings to be washed

is 12.

The maximum permissible inlet water pressure is 1MPa.

The minimum permissible inlet water pressure is

0.04MPa.

Disposal

For disposing of package and the

appliance please go to a recycling center.

Therefore cut off the power supply cable

and make the door closing device

unusable.

Cardboard packaging is manufactured from recycled

paper and should be disposed in the waste paper

collection for recycling.

By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences

for the environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product.

For more detailed information about recycling of this

product, please contact your local city office and

your household waste disposal service.

DISPOSAL: Do not dispose this product as

unsorted municipal waste. Collection of such

waste separately for special treatment is

necessary.

7

PRODUCT OVERVIEW

To get the best performance from your dishwasher, read all operating instructions

before using it for the first time.

IMPORTANT:

8

Cutlery basket Lower basket

upper spray arm

Upper basket

Cup rack

Dispenser

Salt container Filter assembly

Lower spray arm

To make room for taller items in the upper

basket, raise the cup rack upwards.

You can then lean the tall glasses against it.

You can also remove it when it is not

required for use.

NOTE:

Inner pipe

Loading The Salt Into The Softener

Only use salt specifically designed for dishwashers use!

Every other type of salt not specifically designed for dishwasher use,

especially table salt, will damage the water softener. In case of damages

caused by the use of unsuitable salt the manufacturer does not give any

warranty nor is liable for any damages caused.

Only fill with salt before running a cycle.

This will prevent any grains of salt or salty water, which may have been

spilled, remaining on the bottom of the machine for any period of time,

which may cause corrosion.

WARNING

Always use salt intended for dishwasher use.

The salt container is located beneath the lower basket and should be filled as

explained in the following:

Please check the section 1 “Water Softener” of PART Ⅱ: Special Version,

If you need to set the water softener .

Please check the section 1 “Water Softener” of PART Ⅱ: Special Version,

If you need to set the water softener .

9

If your model does not have any water softener, you may skip this section.

NOTE:

USING YOUR DISHWASHER

Before using your dishwasher :

Inside Outside

1. Set the water softener

2. Loading the salt Into the softener

3. Loading the basket

4. Fill the dispenser

10

1. Remove the lower basket and unscrew the reservoir cap.

2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of

dishwasher salt.

3. Fill the salt container to its maximum limit with water, It is normal for a small

amount of water to come out of the salt container.

4. After filling the container, screw back the cap tightly.

5. The salt warning light will stop being after the salt container has been filled with salt.

6. Immediately after filling the salt into the salt container, a washing program should

be started (We suggest to use a short program). Otherwise the filter system, pump

or other important parts of the machine may be damaged by salty water. This is

out of warranty.

NOTE:

The salt container must only be refilled when the salt warning light ( ) in the

control panel comes on. Depending on how well the salt dissolves, the salt

warning light may still be on even though the salt container is filled.

If there is no salt warning light in the control panel (for some Models), you can

estimate when to fill the salt into the softener by the cycles that the dishwasher

has run.

If salt has spilled, run a soak or quick program to remove it.

Please follow the steps below for adding dishwasher salt:

11

MAINTENANCE AND CLEANING

External Care

The door and the door seal

Clean the door seals regularly with a soft damp cloth to remove food deposits.

When the dishwasher is being loaded, food and drink residues may drip onto the

sides of the dishwasher door. These surfaces are outside the wash cabinet and are not

accessed by water from the spray arms. Any deposits should be wiped off before the

door is closed.

The control panel

If cleaning is required, the control panel should be wiped with a soft damp cloth only.

To avoid penetration of water into the door lock and electrical components,

do not use a spray cleaner of any kind.

Never use abrasive cleaners or scouring pads on the outer surfaces because

they may scratch the finish. Some paper towels may also scratch or leave

marks on the surface.

WARNING

Internal Care

Filtering system

The filtering system in the base of the wash cabinet retains coarse debris from the

washing cycle. The collected coarse debris may cause the filters to clog. Check the

NOTE:

Pictures are only for reference, different models of the filtering system and spray

arms may be different.

condition of the filters regularly (each months) and clean them if necessary under

Follow the steps below to clean the filters in the wash cabinet.

running water.

1 2

Hold the coarse filter and rotate it

anticlockwise to unlock the filter.

Lift the filter upwards and out of

the dishwasher.

The fine filter can be pulled off the

bottom of the filter assembly.

The coarse filter can be detached

from the main filter by gently

squeezing the tabs at the top and

pulling it away.

3 4

Larger food remnants can be

cleaned by rinsing the filter under

running water.

For a more thorough clean, use a

soft cleaning brush.

Reassemble the filters in the reverse

order of the disassembly, replace the

filter insert, and rotate clockwise to

the close arrow.

Do not over tighten the filters. Put the filters back in sequence securely,

otherwise coarse debris could get into the system and cause a blockage.

Never use the dishwasher without filters in place. Improper replacement of

the filter may reduce the performance level of the appliance and damage

dishes and utensils.

WARNING

12

Main filter Main filter

Coarse filterCoarse filter

Fine filter

Spray arms

Wash the arms in soapy and warm

water and use a soft brush to clean

the jets. Replace them after rinsing

them thoroughly.

It is necessary to clean the spray arms regularly for hard water chemicals will clog the

spray arm jets and bearings.

To clean the spray arms, follow the instructions below:

2

3

To remove the lower spray arm, pull

out the spray arm upward.

13

1To remove the upper spray arm,

hold the nut, rotate the arm

clockwise to remove it.

14

Caring For The Dishwasher

Frost precaution

Please take frost protection measures on the dishwasher in winter. Every time after

washing cycles, please operate as follows:

1. Cut off the electrical power to the dishwasher at the supply source.

2. Turn off the water supply and disconnect the water inlet pipe from the water valve.

3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)

4. Reconnect the water inlet pipe to the water valve.

5. Remove the filter at the bottom of the tub and use a sponge to soak up water in

the sump.

After every wash

After every wash, turn off the water supply to the appliance and leave the door slightly

open so that moisture and odors are not trapped inside.

Remove the plug

Before cleaning or performing maintenance, always remove the plug from the socket.

No solvents or abrasive cleaning

To clean the exterior and rubber parts of the dishwasher, do not use solvents or

abrasive cleaning products. Only use a cloth with warm soapy water.

To remove spots or stains from the surface of the interior, use a cloth dampened with

water an a little vinegar, or a cleaning product made specifically for dishwashers.

When not in use for a longtime

It is recommend that you run a wash cycle with the dishwasher empty and then remove

the plug from the socket, turn off the water supply and leave the door of the

appliance slightly open. This will help the door seals to last longer and prevent odors

from forming within the appliance.

Moving the appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely

necessary, it can be positioned on its back.

Seals

One of the factors that cause odours to form in the dishwasher is food that remains

trapped in the seals. Periodic cleaning with a damp sponge will prevent this from

occurring.

15

INSTALLATION INSTRUCTION

Ensure the voltage and frequency of the power being corresponds to those on the

rating plate. Only insert the plug into an electrical socket which is earthed properly. If

the electrical socket to which the appliance must be connected is not appropriate for

the plug, replace the socket, rather than using a adaptors or the like as they could

cause overheating and burns.

Electrical requirements

Electrical connection

Ensure that proper earthing exists before use

About Power Connection

WARNING

For personal safety:

Do not use an extension cord or an adapter

plug with this appliance.

Do not, under any circumstances, cut or remove

the earthing connection from the power cord.

The installation of the pipes and electrical equipments should be done by professionals.

Attention

WARNING

Electrical Shock Hazard

Disconnect electrical power before

installing dishwasher.

Failure to do so could result in death or

electrical shock.

Please look at the rating label to know the rating voltage and connect the dishwasher

to the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse

or circuit breaker recommended and provide separate circuit serving only this appliance.

Water Supply And Drain

Cold water connection

Connect the cold water supply hose to

a threaded 3/4(inch) connector and

make sure that it is fastened tightly in

place.

If the water pipes are new or have not

been used for an extended period of

time, let the water run to make sure

that the water is clear. This precaution

is needed to avoid the risk of the

water inlet to be blocked and damage

the appliance.

safety supply hose

ordinary supply hose

About the safety supply hose

The safety supply hose consists of the double walls. The hose's system guarantees its

intervention by blocking the flow of water in case of the supply hose breaking and

when the air space between the supply hose itself and the outer corrugated hose is

full of water.

How to connect the safety supply hose

1. Pull The safety supply hoses completely out from storage compartment located at

rear of dishwasher.

2. Tighter the screws of the safety supply hose to the faucet with thread 3/4inch.

3. Turn water fully on before starting the dishwasher.

WARNING

A hose that attaches to a sink spray can burst if it is installed on the same

water line as the dishwasher. If your sink has one, it is recommended that

the hose be disconnected and the hole plugged.

How to disconnect the safety supply hose

1. Turn off the water.

2. Unscrew the safety supply hose from the faucet.

16

Connection Of Drain Hoses

Please securely fix the drain hose in either position A or position B

B

A

MAX 1000mm

Counter

Drain hose

Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run

into the sink, making sure to avoid bending or crimping it. The height of drain pipe

must be less than 1000mm. The free end of the hose must not be immersed in water

to avoid the back flow of it.

Extension hose

Water outlet

How to drain excess water from hoses

Syphon connection

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained

directly into the sink. It will be necessary to drain excess water from hoses into a bowl

or suitable container that is held outside and lower than the sink.

Connect the water drain hose. The drain hose must be correctly fitted to avoid water

leaks. Ensure that the water drain hose is not kinked or squashed.

The waste connection must be at a height less than 100 cm (maximum) from the

bottom of the dish. The water drain hose should be fixed .

If you need a drain hose extension, make sure to use a similar drain hose.

It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher

could be reduced.

17

Back of dishwasher

Water Inlet

Drain Pipe

Mains Cable

18

Position The Appliance

Position the appliance in the desired location. The back should rest against the wall

behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is

equipped with water supply and drain hoses that can be positioned either to the right

or the left sides to facilitate proper installation.

Free Standing Installation

Fitting between existing carbinets

The height of the dishwasher, 845 mm, has

been designed in order to allow the machine

to be fitted between existing cabinets of the

same height in modern fitted kitchens. The

feet can be adjusted so that correct height is

reached.

The laminated top of the machine does not

require any particular care since it is

heatproof, scratchproof and stainproof.

Levelling the appliance

Once the appliance is positioned for levelling,

the height of the dishwasher may be altered via

adjustment of the screwing level of the feet.

In any case, the appliance should not be inclined

more than 2°.

NOTE:

Only apply to the free standing dishwasher.

19

Built-In Installation(for the integrated model)

Step 1. Selecting the best location for the dishwasher

The installation position of dishwasher should be near the existing inlet and drain hoses

and power cord.

Illustrations of cabinet dimensions and installation position of the dishwasher.

1. Less than 5 mm between the top of dishwasher and cabinet and the outer door

aligned to cabinet.

90 ° 90 °

580mm580mm

820mm820mm

100100

Electrical, drain

and water supply

line entrances

Electrical, drain

and water supply

line entrances

Space between cabinet

bottom and floor

Space between cabinet

bottom and floor

600 mm(for 60cm model)

450 mm(for 45cm model)

8080

Underneath existing work top

(When fitting beneath a work top)

In most modern fitted kitchens there is only one

single work top under which cabinets and

electrical appliances are fitted. In this case remove

the work top of the dishwasher by unscrewing the

screws under the rear edge of the top (a).

aa

bb

After removing the work top, the screws must be screwed again under the rear edge

of the top (b).

Attention

The height will then be reduced to 815 mm, as scheduled by the International

Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top

La page est en cours de chargement...

De Dietrich DFP127ADS-02 Le manuel du propriétaire

Ce manuel convient également à

De Dietrich DFP127ADS-02 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents