Asus ROG STRIX Z370-I GAMING Manuel utilisateur

Motherboard

ROG STRIX

Z370-I GAMING

ii

E13601

Revised Edition

October 2017

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”),

under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software

Licenses. Such software in this product is distributed without any warranty to the extent permitted by the

applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data,

you may obtain it for a period of three years after our last shipment of the product, either

(1) for free by downloading it from https://www.asus.com/support/

or

(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location

where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the

product for which you wish to obtain the corresponding source code and your contact details so that we

can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as

the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source

Software licenses. If however you encounter any problems in obtaining the full corresponding source

code we would be much obliged if you give us a notication to the email address [email protected], stating

the product and describing the problem (please DO NOT send large attachments such as source code

archives, etc. to this email address).

iii

Contents

Safety information ...................................................................................................... vi

About this guide ........................................................................................................ vii

ROG STRIX Z370-I GAMING specications summary ............................................ ix

Package contents ..................................................................................................... xiii

Installation tools and components ......................................................................... xiv

Chapter 1: Product Introduction

1.1 Motherboard overview ............................................................................... 1-1

1.1.1 Before you proceed .....................................................................1-1

1.1.2 Motherboard layout ..................................................................... 1-2

1.1.3 Central Processing Unit (CPU) ...................................................1-4

1.1.4 System memory ..........................................................................1-5

1.1.5 Expansion slots ........................................................................... 1-7

1.1.6 Jumpers ......................................................................................1-8

1.1.7 Onboard LEDs ..........................................................................1-10

1.1.8 Internal connectors....................................................................1-11

Chapter 2: Basic Installation

2.1 Building your PC system...........................................................................2-1

2.1.1 Motherboard installation ..............................................................2-1

2.1.2 CPU installation...........................................................................2-3

2.1.3 Cooling system installation..........................................................2-5

2.1.4 DIMM installation.........................................................................2-7

2.1.5 ATX power connection ................................................................ 2-8

2.1.6 SATA device connection ............................................................. 2-9

2.1.7 Front I/O connector ...................................................................2-10

2.1.8 Expansion card installation .......................................................2-11

2.1.9 M.2 installation ..........................................................................2-12

2.1.10 Wi-Fi antenna installation ..........................................................2-13

2.2 Motherboard rear and audio connections ............................................. 2-14

2.2.1 Rear I/O connection ..................................................................2-14

2.2.2 Audio I/O connections ............................................................... 2-16

2.3 Starting up for the rst time .................................................................... 2-18

2.4 Turning off the computer ........................................................................ 2-19

iv

Chapter 3: BIOS Setup

3.1 Knowing BIOS ............................................................................................ 3-1

3.2 BIOS setup program .................................................................................. 3-2

3.2.1 EZ Mode......................................................................................3-3

3.2.2 Advanced Mode ..........................................................................3-4

3.2.3 QFan Control...............................................................................3-7

3.2.4 EZ Tuning Wizard .......................................................................3-9

3.3 My Favorites ............................................................................................. 3-12

3.4 Main menu ................................................................................................ 3-14

3.5 Ai Tweaker menu......................................................................................3-14

3.6 Advanced menu ....................................................................................... 3-16

3.6.1 Platform Misc Conguration ...................................................... 3-16

3.6.2 CPU Conguration ....................................................................3-16

3.6.3 System Agent (SA) Conguration ............................................. 3-17

3.6.4 PCH Conguration ....................................................................3-17

3.6.5 PCH Storage Conguration.......................................................3-18

3.6.6 Onboard Devices Conguration ................................................ 3-18

3.6.7 APM Conguration .................................................................... 3-19

3.6.8 Network Stack Conguration.....................................................3-19

3.6.9 HDD/SSD SMART Information .................................................3-19

3.6.10 USB Conguration ....................................................................3-19

3.7 Monitor menu ........................................................................................... 3-20

3.8 Boot menu ................................................................................................ 3-20

3.9 Tool menu ................................................................................................. 3-22

3.9.1 ASUS EZ Flash 3 Utility ............................................................3-22

3.9.2 Secure Erase ............................................................................3-22

3.9.3 ASUS Overclocking Prole .......................................................3-24

3.9.4 ASUS SPD Information ............................................................. 3-24

3.9.5 Graphics Card Information ........................................................ 3-24

3.10 Exit menu .................................................................................................. 3-25

3.11 Updating BIOS .......................................................................................... 3-25

3.11.1 EZ Update ................................................................................. 3-25

3.11.2 ASUS EZ Flash 3 ...................................................................... 3-26

3.11.3 ASUS CrashFree BIOS 3 ..........................................................3-28

v

Chapter 4: RAID Support

4.1 RAID congurations .................................................................................. 4-1

4.1.1 RAID denitions ..........................................................................4-1

4.1.2 Installing Serial ATA hard disks ..................................................4-2

4.1.3 Intel® Rapid Storage Technology in UEFI BIOS ..........................4-2

4.1.4 Intel® Rapid Storage Technology Option ROM utility .................. 4-6

4.2 Creating a RAID driver disk.....................................................................4-10

4.2.1 Creating a RAID driver disk in Windows® .................................4-10

Appendix

Notices .................................................................................................................... A-1

ASUS contact information ...................................................................................... A-8

vi

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables

for the devices are unplugged before the signal cables are connected. If possible,

disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all

power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices

could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not

sure about the voltage of the electrical outlet you are using, contact your local power

company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all the manuals

that came with the package.

• Before using the product, ensure all cables are correctly connected and the power

cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area

where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

vii

About this guide

This user guide contains the information you need when installing and conguring the

motherboard.

How this guide is organized

This guide contains the following parts:

1. Chapter 1: Product Introduction

This chapter describes the features of the motherboard and the new technology it

supports. It includes description of the switches, jumpers, and connectors on the

motherboard.

2. Chapter 2: Basic Installation

This chapter lists the hardware setup procedures that you have to perform when

installing system components.

3. Chapter 3: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus.

Detailed descriptions of the BIOS parameters are also provided.

4. Chapter 4: RAID Support

This chapter describes the RAID congurations.

Where to nd more information

Refer to the following sources for additional information and for product and software

updates.

1. ASUS website

The ASUS website (www.asus.com) provides updated information on ASUS hardware

and software products.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the

standard package.

viii

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

ix

ROG STRIX Z370-I GAMING specications summary

CPU

Intel® Socket 1151 for 8th Generation Core™ Processors

Supports 14nm CPU

Supports Intel® Turbo Boost Technology 2.0*

* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.

** Refer to www.asus.com for Intel® CPU support list.

Chipset Intel® Z370 Chipset

Memory

2 x DIMM, max. 32GB DDR4 4333+ (O.C.) / 4266 (O.C.) / 4133(O.C.)

/ 4000(O.C.) / 3866(O.C.) / 3733(O.C.) / 3600(O.C.) / 3466(O.C.) /

3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) /

2800(O.C.) / 2666(O.C.) / 2400 / 2133 MHz Non-ECC, Un-buffered

Memory

Dual channel memory architecture

Supports Intel® Extreme Memory Prole (XMP)*

* Hyper DIMM support is subject to the physical characteristics of individual CPUs.

Please refer to Memory QVL(Qualied Vendors List) for details.

Expansion slots

1 x PCIe 3.0 x16 slot*

* For 2 or 3 Intel® SSDs on CPU support, install a Hyper M.2 X16 card (sold

separately) into the PCIeX16 slot, and enable this card under BIOS settings.

VGA

Integrated Graphics Processor- Intel® HD Graphics support

Multi-VGA output support: DisplayPort/HDMI ports

Supports DisplayPort 1.2* with max. resolution 4096 x 2304@60Hz

Supports HDMI 1.4b with max. resolution 4096 x 2160@24Hz

Supports Intel® InTru™ 3D/Quick Sync Video/Clear Video HD Technology/

Insider™

Maximum shared memory of 1024MB

* DP 1.2 Multi-Stream Transport compliant, supports DP 1.2 monitor daisy chain

up to 3 displays.

Storage

Intel® Z370 Chipset with RAID 0, 1, 5, 10 and Intel Rapid Storage

Technology support

- 4 x SATA 6Gb/s ports

- 1 x M.2_1 Socket 3 with M key, type 2242/2260/2280 storage devices

support (both SATA & PCIE 3.0 x 4 modes)*

- 1 x M.2_2 Socket 3 with M key, type 2242/2260/2280 storage devices

support (PCIE 3.0 x 4 mode)*

- Ready for Intel® Optane Memory**

* For a 2242 storage device, use the bundled 2242 mounting kit.

** Intel® Optane Technology only supported when using 8th Generation Intel®

Processors. Before using Intel® Optane memory modules, ensure that you have

updated your motherboard drivers and BIOS to the latest version from ASUS

support website.

LAN

Intel® I219-V Gigabit LAN- Dual interconnect between the integrated Media

Access Controller (MAC) and physical layer (PHY)

Anti-surge LANGuard

ROG GameFirst Technology

(continued on the next page)

x

(continued on the next page)

ROG STRIX Z370-I GAMING specications summary

Wireless &

Bluetooth

Wi-Fi 802.11 a/b/g/n/ac supports dual frequency band 2.4/5 GHz with

MU-MIMO support

Bluetooth v4.2

Audio

ROG SupremeFX S1220A 8-Channel High Denition Audio CODEC

- Supports up to 32-Bit/192kHz playback

- Impedance sense for front and rear headphone outputs

- High quality 120dB SNR stereo playback output and 113 dB SNR

recording input

- SupremeFX Shielding Technology

- Dual Headphone Ampliers

- Jack-detection, Multi-streaming, and Front Panel Jack-retasking

- Optical S/PDIF out port at back panel

Audio Features:

- Sonic Radar III

- Sonic Studio III + Sonic Studio Link

USB

Intel® Z370 Chipset:

- 6 x USB 3.1 Gen1 ports ( 3 x Type-A and 1 x Type-C ports at back panel,

2 ports at mid-board)

- 6 x USB 2.0 ports ( 4 ports at back panel, 2 ports at mid-board)

ASMedia® USB 3.1 Gen2 controller*:

- 1 x USB 3.1 Gen2 front panel connector

* Supports 3A power output

Back I/O Ports

1 x DispalyPort

1 x HDMI port

1 x Anti-surge LAN (RJ45) port

4 x USB 3.1 Gen1 ports (3 x Type-A [blue] and 1 x Type-C ports at back

panel)

4 x USB 2.0 ports

1 x Optical S/PDIF out

5 x Audio jacks

1 x ASUS Wi-Fi module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v4.2)

ROG Exclusive

Features

ROG RAMCache II

ROG GameFirst IV

ROG Overwolf

ROG CloneDrive

ASUS Special

Features

5-Way Optimization

- Whole system optimization with a single click! Perfectly consolidates

better CPU performance, power saving, digital power control, system

cooling and app usages.

DIGI+VRM

TPU

- Auto Tuning, TPU, GPU Boost

EPU

xi

(continued on the next page)

ROG STRIX Z370-I GAMING specications summary

ASUS Special

Features

Fan Xpert 4

- featuring Fan Auto Tuning function and multiple thermistors selection

for optimized system cooling control

ASUS EZ DIY

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 3

ASUS Q-Design

- Q-Shield

- Q-LED (CPU, DRAM, VGA, Boot Device LED)

- Q-Slot

- Q-DIMM

Gamer’s Guardian

- SafeSlot

- DIGI+ VRM

- DRAM Overcurrent Protection

- ESD Guards on LAN, Audio, and USB ports

- Highly Durable Components

- Stainless Steel Back I/O

ASUS Exclusive Features

- AURA Lighting Control

- AI Suite 3

- AI Charger

Internal I/O

connectors

1 x USB 3.1 Gen2 front panel connector

1 x USB 3.1 Gen1 connector supports additional 2 x USB 3.1 Gen1 ports

1 x USB 2.0 connector supports additional 2 x USB 2.0 ports

4 x SATA 6Gb/s connectors

1 x 4-Pin CPU fan connector

1 x 4-Pin Chassis fan connector

1 x 4-Pin AIO_PUMP connector

1 x 24-pin EATX power connector

1 x 8-pin EATX 12V power connector

1 x M.2_1 Socket 3 for M Key, type 2242/2260/2280 storage devices support

( Supports PCIE 3.0 x 4 and SATA modes)*

1 x M.2_2 Socket 3 for M Key, type 2242/2260/2280 storage devices support

(Supports PCIE mode only)*

1 x Front panel audio connector (AAFP)

1 x Addressable Header

1 x System panel connector

1 x Thermal sensor connector

1 x Clear CMOS jumper (2-pin)

* For a 2242 storage device, use the bundled 2242 mounting kit.

xii

ROG STRIX Z370-I GAMING specications summary

BIOS Features

128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, SM BIOS 3.0 ACPI

6.0, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F11 EZ

Tuning Wizard, F6 Qfan Control, F3 My Favorites, Last Modied log, F12

PrintScreen, and ASUS DRAM SPD (Serial Presence Detect) memory

information

Manageability DMI 3.0, WOL by PME, PXE

Support DVD

contents

Drivers

ASUS Utilities

ASUS EZ Update

Anti-virus software (OEM version)

Operating

system support

Windows® 10 64-bit

Form factor Mini ITX Form Factor, 6.7”x 6.7” (17cm x 17cm)

Specications are subject to change without notice. Please refer to the ASUS website for

the latest specications.

xiii

Package contents

Check your motherboard package for the following items.

Motherboard ROG STRIX Z370-I GAMING

Cables 4 x SATA 6Gb/s cables

1 x Addressable LED extension cable

Accessories

1 x I/O shield

2 x M.2 2242 mounting kits (BRKT)

2 x M.2 screw packages

1 x Panel Cable (15cm)

1 x CPU Installation tool

1 x Cablemod Coupon (Optional by area)

1 x ASUS 2T2R dual band Wi-Fi moving antennas

(Wi-Fi 802.11a/b/g/n/ac compliant)

1 x STRIX series sticker

Application drive ROG motherboard support DVD

Documentation User guide

If any of the above items is damaged or missing, contact your retailer.

xiv

Installation tools and components

The tools and components listed above are not included in the motherboard package.

PC chassis

Power supply unit

Intel® 1151 compatible CPU Fan

Intel® 1151 CPU

DIMM

SATA hard disk drive

Graphics card

Phillips (cross) screwdriver

SATA optical disc drive (optional)

1 bag of screws

ROG STRIX Z370-I GAMING 1-1

Chapter 1

Product Introduction

1

Chapter 1: Product Introduction

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due

to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so

may cause severe damage to the motherboard, peripherals, or components.

1.1 Motherboard overview

1.1.1 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

1-2 Chapter 1: Product Introduction

Chapter 1

1.1.2 Motherboard layout

17.0cm(6.7in)

EATXPWR

ADD_HEADER

DDR4 DIMM_A1 (64bit, 288-pin module)

M.2_1(SOCKET3)

M.2_2(SOCKET3)Bottom

DDR4 DIMM_B1 (64bit, 288-pin module)

CPU_LED

DRAM_LED

VGA_LED

BOOT_DEVICE_LED

F_PANEL

SATA6G_1

SATA6G_2

SATA6G_3SATA6G_4

SPEAKER

HDMI_DP

BATT_CON

U31G1_12

PCIEX16

USB1112

2280 2260

TPU

CHA_FAN

AIO_PUMP

CPU_FAN

EATX12V

Intel®

Z370

Intel®

I219V

LGA1151

AAFP

LAN_U31G1_34

U31G1_C6

ASM

3142

U31G1_5

USB7_10

U31G2_EC1

M.2(WIFI)

AUDIO

T_SENSOR

Super

I/O

CLRTC

PCIE SATA IRST

X4 V V

DIGI

+VRM

(Bottom)

128Mb

BIOS

RGBLED

1 2 3

9

3

10

11

12

13

14

216

13

15

2

17

18

76 854

6

ROG STRIX Z370-I GAMING 1-3

Chapter 1

Refer to 1.1.8 Internal connectors and 2.2.1 Rear I/O connection for more information

about rear panel connectors and internal connectors.

Layout contents

Connectors/Jumpers/Buttons and switches/Slots Page

1. USB 3.1 Gen2 connector (U31G2_EC1) 1-12

2. CPU, and chassis fan connectors; AIO pump connector (4-pin CPU_FAN;

4-pin CHA_FAN; 4-pin AIO_PUMP; ) 1-14

3. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 1-15

4. Thermal sensor cable connector (2-pin T_SENSOR) 1-18

5. LGA1151 CPU socket 1-4

6. M.2 sockets (M.2_1; M.2_2) 1-17

7. DDR4 DIMM slots 1-5

8. POST State LEDs 1-10

9. RGB LED 1-10

10. Addressable RGB header (4-1 pin ADD_HEADER) 1-18

11. System panel connector (10-1 pin PANEL) 1-16

12. Speaker connector (4-pin SPEAKER) 1-13

13. Intel® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34) 1-11

14. USB 3.1 Gen1 connector (20-1 pin U31G1_12) 1-12

15. Clear RTC RAM jumper (2-pin CLRTC) 1-8

16. USB 2.0 connector (10-1 pin USB1112) 1-13

17. Front panel audio connector (10-1 pin AAFP) 1-11

18. RTC Battery header (2-pin BATT_CON) 1-9

1-4 Chapter 1: Product Introduction

Chapter 1

1.1.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1151 socket designed for the 8th

Generation Core™ processors.

• Ensure that all power cables are unplugged before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and

the socket contacts are not bent. Contact your retailer immediately if the PnP cap

is missing, or if you see any damage to the PnP cap/socket contacts/motherboard

components. ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1151 socket.

• The product warranty does not cover damage to the socket contacts resulting from

incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP

cap.

ROG STRIX Z370-I GAMING CPU socket LGA1151

ROG STRIX Z370-I GAMING 1-5

Chapter 1

Recommended memory congurations

1.1.4 System memory

The motherboard comes with two DDR4 (Double Data Rate 4) Dual Inline Memory Modules

(DIMM) slots.

A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT

install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

ROG STRIX Z370-I GAMING

288-pin DDR4 DIMM sockets

DIMM_A1

DIMM_B1

1-6 Chapter 1: Product Introduction

Chapter 1

• You may install varying memory sizes in Channel A, and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel conguration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

• For more details, refer to the Microsoft® support site at http://support.microsoft.com/

kb/929605/en-us.

• The design of the DIMM fan may vary. Ensure that the DIMM fan ts to the

motherboard

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value.

• For system stability, use a more efcient memory cooling system to support a full

memory load (2 DIMMs) or overclocking condition.

• Memory modules with memory frequency higher than 2133MHz and their

corresponding timing or the loaded XMP prole is not the JEDEC memory standard.

The stability and compatibility of the memory modules depend on the CPU’s

capabilities and other installed devices.

• Always install the DIMMS with the same CAS Latency. For an optimum compatibility,

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

• ASUS exclusively provides hyper DIMM support function.

• Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load

the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.

• Visit the ASUS website for the latest QVL.

Memory congurations

You may install 1 GB, 2 GB, 4 GB, 8 GB and 16 GB unbuffered and non-ECC DDR4 DIMMs

into the DIMM sockets.

La page est en cours de chargement...

Asus ROG STRIX Z370-I GAMING Manuel utilisateur

Asus ROG STRIX Z370-I GAMING Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents