Samsung GQ32LS03TBK Manuel utilisateur

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com

Model Serial No.

USER MANUAL

LS03T

Before Reading This User Manual

This TV comes with this user manual and an embedded e-Manual.

Before reading this user manual, review the following:

User Manual

Read this provided user manual to see information

about product safety, installation, accessories,

initial configuration, and product specifications.

e-Manual

For more information about this TV, read the

e-Manual embedded in the product.

 To open the e-Manual,

> Settings > Support > Open e-Manual

On the website (www.samsung.com), you can download the manuals and see its contents on your PC or mobile

device.

Learning the e-Manual's assistance functions

 Some menu screens cannot be accessed from the e-Manual.

Search

Select an item from the search results to load the corresponding page.

Index

Select a keyword to navigate to the relevant page.

– The menus may not appear depending on the geographical area.

Site Map

It displays the lists for each item in e-Manual.

Recently Viewed

Topics

Select a topic from the list of recently viewed topics.

Learning the functions of the buttons that appear on e-Manual topic

pages

Try Now

Allows you to access the corresponding menu item and try out the feature

right away.

Link

Access an underlined topic referred to on an e-Manual page immediately.

English

English - 2

Warning! Important Safety Instructions

Please read the Safety Instructions before using your TV.

Refer to the table below for an explanation of symbols which may be on your Samsung product.

CAUTION

Class II product: This symbol indicates that a

safety connection to electrical earth (ground)

is not required. If this symbol is not present on

a product with a mains lead, the product MUST

have a reliable connection to protective earth

(ground).

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

AC voltage: Rated voltage marked with this

symbol is AC voltage.

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

DC voltage: Rated voltage marked with this

symbol is DC voltage.

This symbol indicates that this product has

included important literature concerning

operation and maintenance.

Caution. Consult instructions for use: This

symbol instructs the user to consult the user

manual for further safety related information.

 The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To

ensure reliable operation of this apparatus and to protect it from overheating, these slots and openings

must never be blocked or covered.

– Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper

ventilation is provided.

– Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct

sunlight.

– Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or

electric shock.

 Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet,

unplug it and contact an authorised dealer immediately.

 This apparatus uses batteries. In your community, there might be environmental regulations that require

you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling

information.

 Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire

or electric shock.

 Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed

upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point

where they exit from the appliance.

English - 3

English

 To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage

to the set due to lightning and power line surges.

 Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of

the DC adaptor corresponds to the local electrical supply.

 Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric

shock.

 To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open

this apparatus.

 Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall

outlet, always pull on the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the

power cord with wet hands.

 If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming

from it - unplug it immediately and contact an authorised dealer or Samsung service centre.

 Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are going to leave the

house for an extended period of time (especially when children, elderly, or disabled people will be left alone

in the house).

– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord

to generate sparks and heat or by causing the insulation to deteriorate.

 Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in

a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will

operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage

to your TV.

 Use only a properly grounded plug and wall outlet.

– An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

 To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this

apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.

 Store the accessories (batteries, etc.) in a location safely out of the reach of children.

 Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a

Samsung service centre.

 To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry

cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners,

lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on

the product.

 Do not expose this apparatus to dripping or splashing.

 Do not dispose of batteries in a fire.

 Do not short-circuit, disassemble, or overheat the batteries.

 CAUTION: There is danger of an explosion if you replace the batteries used in the remote with the wrong

type of battery. Replace only with the same or equivalent type.

* Figures and illustrations in this User Manual are provided for reference only and may differ from the actual

product appearance. Product design and specifications may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for

customers in EU region.

English - 4

Before Reading This User Manual ---------------------------------------------------------------------------- 2

Warning! Important Safety Instructions

---------------------------------------------------------------------------- 3

01 What's in the Box?

02 Connecting the TV to the One Connect

03 TV Installation

Mounting the TV on a wall ---------------------------------------------------------------------------- 8

Providing proper ventilation for your TV

---------------------------------------------------------------------------- 9

Safety Precaution: Securing the TV to the wall to

prevent falling

---------------------------------------------------------------------------- 9

04 Using Art Mode

Viewing images ---------------------------------------------------------------------------- 12

Setting the style of the selected image

---------------------------------------------------------------------------- 14

Setting up Art mode

---------------------------------------------------------------------------- 15

Using Art mode with the SmartThings app

---------------------------------------------------------------------------- 15

05 The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote ---------------------------------------------------------------------------- 16

Pairing the TV to the Samsung Smart Remote

---------------------------------------------------------------------------- 17

Installing batteries into the Samsung Smart Remote

---------------------------------------------------------------------------- 17

06 Running the Initial Setup

Using the TV Controller ---------------------------------------------------------------------------- 18

07 Connecting to a Network

Network Connection - Wireless ---------------------------------------------------------------------------- 19

08 Troubleshooting and Maintenance

Troubleshooting ---------------------------------------------------------------------------- 20

Precautions when using Art mode

---------------------------------------------------------------------------- 22

What is Remote Support?

---------------------------------------------------------------------------- 22

Eco Sensor and screen brightness

---------------------------------------------------------------------------- 23

Caring for the TV

---------------------------------------------------------------------------- 23

09 Specifications and Other Information

Specifications ---------------------------------------------------------------------------- 24

Environmental Considerations

---------------------------------------------------------------------------- 24

Decreasing power consumption

---------------------------------------------------------------------------- 24

Licences

---------------------------------------------------------------------------- 25

English - 5

English

Contents

01 What's in the Box?

Make sure the following items are included with your TV. If any items are missing, contact your dealer.

 Samsung Smart Remote & Batteries (AA x 2)

 User Manual

 Warranty Card / Regulatory Guide (Not available in

some locations)

 One Connect Power Cable

x 2

(M4 x L14)

One Connect One Connect Cable Holder-Cable Stand Screw

 The items’ colours and shapes may vary depending on the models.

 Cables not included can be purchased separately.

 Check for any accessories hidden behind or in the packing materials when opening the box.

An administration fee may be charged in the following situations:

(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the

user manual has not been read).

(b) You bring the unit to the Samsung service centre, but it is found that the product has no defect (i.e.,

where the user manual has not been read).

You will be informed of the administration fee amount before a technician visits.

Warning: Screens can be damaged from direct pressure

when handled incorrectly. We recommend lifting the

TV at the edges, as shown.

Do Not Touch

This Screen!

English - 6

02 Connecting the TV to the One Connect

4

3

1 2

10 cm

TV One Connect

To connect the One Connect Cable to the One Connect and your TV, follow these steps:

1. After the TV is completely set up and placed in its final position, connect the One Connect Cable to the One

Connect and the TV as shown in Steps 1 to 3 above.

WARNING: Make sure that both connectors are fully and firmly connected. If either connecter is not

connected properly, there is a danger of severe electric shock.

2. Connect the One Connect AC power cord to the One Connect, and then connect the cord to a wall outlet as

shown in Step 4 above.

WARNING: Follow the directions exactly. Be sure to connect the power cord to the wall outlet as the last

step. Always disconnect the power cord from the wall outlet before disconnecting the One Connect Cable

from the back of the TV or from the One Connect.

– See the illustrated Quick Setup Guide for more information.

3. Connect your peripherals (aerial, cable box, Blu-ray player, etc.) to the One Connect. See the Accessory Kit

for details.

 Do not use the One Connect in the upside-down or upright position.

 When connecting the One Connect Cable, pay attention to the shapes and sizes of its connectors

so that they are connected correctly. Failure to do so may cause product malfunction.

 When connecting the One Connect Cable, be careful not to twist the cable of the One Connect

Cable. Failure to do so may cause performance degradation of the TV or damage to the cable.

 When arranging the remaining cable, refer to the figure above for the correct arrangement.

 Take care not to subject the cable to any of the actions below. The One Connect Cable contains a

power circuit. You could damage the cable and subject yourself to an electric shock.

 Handle the One Connect carefully. It is heavy.

Bending Twisting Pulling Pressing on Electric shock

English - 7

English

03 TV Installation

Mounting the TV on a wall

If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless

it is correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and

serious damage to the TV.

 Refer to the installation manual included with the Samsung wall mount kit.

TV

 Samsung is not responsible for any damage to the product or injury to yourself or others if you choose to

install the wall mount on your own.

 You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount

to surfaces other than plaster board, contact your nearest dealer for additional information. If you install

the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

TV size in

inches

Screw hole specs (A * B) in

millimetres

Screw Quantity

32 582.2 x 277.5 M4 2

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from

electric shock.

 Be sure to use only the screws provided with the product. (Otherwise, it may cause damage to the TV or the

wall-mounted TV may fall from the wall.)

 Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to

personal injury. Samsung is not liable for these kinds of accidents.

 Samsung is not liable for product damage or personal injury when a non-specified wall mount is used or

when the consumer fails to follow the product installation instructions.

English - 8

Providing proper ventilation for your TV

When you install your TV and One Connect, maintain a distance of at least 10 cm between the TV and One

Connect with other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper

ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.

 When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by

Samsung only. Using parts provided by another manufacturer may cause difficulties with the product or

result in injury caused by the product falling.

Safety Precaution: Securing the TV to the wall to prevent falling

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,

ensure your children do not hang on or destabilise the TV. This action may cause the TV

to tip over, causing serious injuries or death. Follow all safety precautions provided in the

Safety Flyer included with your TV. For added stability and safety, you can purchase and

install the anti-fall device as described on the next page.

WARNING: Never place a television set in an unstable location. The television set may fall, causing

serious personal injury or death. Many injuries, particularly to children, can be avoided by taking

simple precautions such as:

 Always use cabinets or stands or mounting methods recommended by the manufacturer of the

television set.

 Always use furniture that can safely support the television set.

 Always ensure the television set is not overhanging the edge of the supporting furniture.

 Always educate children about the dangers of climbing on furniture to reach the television set

or its controls.

 Always route cords and cables connected to your television so they cannot be tripped over,

pulled or grabbed.

 Never place a television set in an unstable location.

 Never place the television set on tall furniture (for example, cupboards or bookcases) without

anchoring both the furniture and the television set to a suitable support.

 Never place the television set on cloth or other materials that may be located between the

television set and supporting furniture.

 Never place items that might tempt children to climb, such as toys and remote controls, on the

top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above

should be applied.

 When installed on a stand, the display of this product is tilted slightly backward and its angle

cannot be adjusted.

 If any object is placed on the stand or the floor is tilted, the product may fall over, which causes

malfunction or personal injury.

English - 9

English

Preventing the TV from falling

1. Using the appropriate screws, firmly fasten a set of brackets to the

wall. Confirm that the screws are firmly attached to the wall.

– You may need additional material such as wall anchors

depending on the type of wall.

2. Using the appropriately sized screws, firmly fasten a set of brackets

to the TV.

– For the screw specifications, refer to the Screw part in the table

under "Mounting the TV on a wall".

3. Connect the brackets fixed to the TV and the brackets fixed to the

wall with a durable, heavy-duty string, and then tie the string tightly.

– Install the TV near the wall so that it does not fall backwards.

– Connect the string so that the brackets fixed to the wall are at

the same height as or lower than the brackets fixed to the TV.

 The product colour and shape

may vary depending on the

model.

English - 10

04 Using Art Mode

> Art

You can use Art mode function to display image content such as artworks or photos when you are not watching

TV in full screen mode.

 Press the button on the remote control to switch to TV mode or Art mode.

 Press the button in Art mode to switch to TV mode.

 To turn off the TV completely, press and hold the button on the remote control, or press the TV

Controller button at the top left of the TV.

– If you use a remote control other than the Samsung Smart Remote, the TV may not be turned off

completely.

 In Art mode, the brightness and colour tone of your TV are automatically adjusted depending on the

ambient, and the TV can be automatically turned off.

– The TV is set by default so that the screen turns off automatically when the ambient light dims in Art

mode.

 In Art mode, you can connect your mobile device to the TV using the SmartThings app on the mobile device

to view photos on the mobile device.

– This function may not be supported depending on the TV model or mobile device.

– Supported features may differ depending on the version of the SmartThings app.

English - 11

English

Viewing images

Options+

Recent

Art Store My Collection Settings

 The image on your TV may differ from the image above depending on the model and geographical area.

To view an image in Art mode, select one of the menus below. To switch to the sub menu where you can select

images, press the Select button, one of the four directional buttons, or

button in Art mode. Then, use the

directional buttons on the remote control to move to desired image, and then press the Select button.

Set

appears at the top of the selected image, and you can view the selected image in Art mode.

 Recent

You can manipulate the last selected images.

 Art Store

You can go to Art Store to purchase various images.

– The Art Store may not appear depending on the network connection status.

 My Collection

You can view a list of artworks and photos that you set as

Favourite in Favourites. You can also select

the desired ones among the images saved on an external storage device or a mobile device and save them

in My Photos.

– In order to fetch the images from your mobile device, the SmartThings app must have been installed in

your mobile device.

Viewing images by time

1. Use the directional buttons on the remote control to move to My Collection.

2. Use the directional buttons to move to Favourites or My Photos.

To view the images on the mobile device connected via the USB or SmartThings app, select the desired

images on the connected device and then save them into My Photos.

3. Use the directional buttons on the remote control to move to Options+ at the top of the screen.

4. Press the Select button when the Start Slideshow item appears.

5. Use the directional buttons on the remote control to select the time that images will be replaced, and then

press the Select button.

English - 12

Import images from an external storage device

1. Connect an external storage device that contains images to the TV.

2. Use the directional buttons on the remote control to move to My Collection, and then move to the

connected external storage device.

3. Use the directional buttons on the remote control to move to Save to My Photos at the top of the screen,

and then press the Select button.

4. Use the directional buttons on the remote control to move to an image, and then press the Select button.

– You can select multiple images.

5. Use the directional buttons on the remote control to move to Save Selected at the top of the screen, and

then press the Select button.

6. The selected image or images are saved in My Photos.

 

Buying images from Art Store

1. Use the directional buttons on the remote control to move to Art Store.

2. Use the directional buttons on the remote control to move to a topic, and press the Select button. You can

select any subtopics or images on the screen.

– The entry path may differ by each topic.

3. Use the directional buttons on the remote control to move to an image, and press the Select button.

4. Use the directional buttons on the remote control to move to Options+ at the top of the screen, and then

select Get Trial Membership or Buy to buy the selected image.

– Displays Get Trial Membership if you have not joined Art Store Membership.

5. Use the directional buttons on the remote control to select payment methods, and then press the Select

button.

6. Follow the on-screen instructions to procedure payment.

Subscribing to Art Store Membership

When you subscribe to Art Store Membership, you can use Art Store unlimitedly and enjoy various art works by

replacing them with new ones according to your preferences.

1. Use the directional buttons on the remote control to move to Art Store.

2. Use the directional buttons on the remote control to move to Membership.

3. Follow the on-screen instructions to enter your membership information.

English - 13

English

Setting the style of the selected image

Details

Mount Favourites

Cantemporary

 The image on your TV may differ from the image above depending on the model and geographical area.

Use the directional buttons on the remote control to move to Options+ at the top of the screen. You can use the

following menus:

 Details

You can find more information about the image.

 Photo Filter

You can apply the selected filter's effect to the image according to your preferences.

– This function is only available for saved images on My Photos.

 Mount

You can apply various border styles and colours to the image according to your preferences.

– This function is only available for saved images on My Photos.

 Favourite

You can set (or not set) an image that you prefer as a favourite item by pressing the Select button on the

remote control. You can view a list of items set as your favourites in My Collection > Favourites.

– Favourite: Not set as a favourite.

– Favourite: Set as a favourite.

Apply a border style and a colour to an image

1. Using the directional buttons on the remote control to move to the image whose border style and colour

you want to change, move to Options+ at the top of the screen, and then select Mount.

2. Use the directional buttons on the remote control to select the border style and colour that you want.

3. Change the border style and colour, and then press the Select button to move the focus to the image.

– If you want to change only either the border style or the color, change it, and then press the Select

button to save the changes.

4. To save the selected border style and colour, press the Select button again.

– If you press the button to exit, the border style and colour you changed are not saved.

English - 14

Setting up Art mode

In Art mode, use the directional buttons on the remote control to move to the Settings menu item at the

bottom. You can adjust the following functions:

 Brightness

Use the directional buttons on the remote control to move to Modify at the top, and then press the Select

button. In the next screen, adjust the picture brightness. After selecting the desired settings, press the

Select button on the remote control.

– To immediately set Brightness while enjoying Art mode, press the button on the remote control.

 Sleep After

If no motion is detected around the TV for the set time, the TV turns off automatically. Use the directional

buttons on the remote control to move to the top items. After selecting the desired time, press the Select

button on the remote control.

 Night Mode

When this function is turned on, the TV turns off automatically if no light is detected around the TV. Use the

directional buttons on the remote control to move to the top items, and then turn this function on or off.

Remove images from My Collection

You can remove the saved images from My Collection.

1. Use the directional buttons on the remote control to move to My Collection.

2. Use the directional buttons on the remote control to move to Favourites or My Photos.

3. Use the directional buttons on the remote control to move to Options+ at the top of the screen.

4. Move the focus to Remove, and then press the Select button on the remote control.

5. Use the directional buttons on the remote control to move to an image, and then press the Select button.

– You can select multiple images.

6. Use the directional buttons on the remote control to move to Remove Selected at the top of the screen,

and then press the Select button.

Using Art mode with the SmartThings app

Once you have installed the SmartThings app on your mobile device, you can use the following functions:

You can download the SmartThings app from Google Play Store, Samsung Apps, or the App Store.

– The features or terminology may vary depending on the version of the SmartThings app.

– On tablet devices, Art mode features may not be supported by the SmartThings app.

 Selecting images

 Subscribing to Art Store Membership

 Creating Collage: Combine multiple images into one image.

 Applying border styles and colours to images

 Setting the brightness for Art mode

 Setting Sleep After: When no motion is detected for the time specified in Art mode, the TV turns off

automatically.

 Setting Night Mode: Set The Frame to turn off automatically if no light is detected in the room.

English - 15

English

05 The Samsung Smart Remote

About the Buttons on the Samsung Smart Remote

 The images, buttons, and functions of the Samsung Smart Remote may differ depending on the model.

(Power)

When watching TV, press to switch to

Art mode. In Art mode, press to switch

to watching TV.

 Press and hold to turn off the TV

completely.

(Number button)

When pressed, a number strip appears

on the bottom of the screen. Select

numbers and then select Done to enter

a numeric value. Use to change the

channel, enter a PIN, enter a ZIP code,

etc.

 When pressed for 1 second or more,

the TTX menu appears.

(Return)

Returns to the previous menu. When

pressed for 1 second or more, the

running function is terminated. When

pressed while you are watching a

programme, the previous channel

appears.

(Play/pause)

When pressed, the playback controls

appear. Using these controls, you

can control the media content that is

playing.

(Smart Hub)

Returns to the Home Screen.

 Press in Art mode to switch to TV

mode.

(Volume)

Move the button up or down to adjust

the volume. To mute the sound, press

the button. When pressed for 1 second or

more, the Accessibility Shortcuts menu

appears.

(Channel)

Move the button up or down to change

the channel. To see the Guide screen,

press the button.

 When pressed for 1 second or more,

the Channel List screen appears.

Press each button to run its function.

Select

Selects or runs a focused item. When

pressed while you are watching a

broadcast programme, detailed

programme information appears.

Directional button (up/down/left/

right)

Moves the focus and changes the values

seen on the TV's menu.

(Bixby)

Runs Bixby. Press and hold the button,

say a command, and then release the

button to run Bixby.

When you press the button, the Explore

Now menu appears at the bottom of the

screen.

 The supported Bixby's languages

and features may differ by

geographical region.

(Colour button)

Use these coloured buttons to access

additional options specific to the feature

you are using.

 To immediately set Brightness while

enjoying Art mode, press the button.

English - 16

Pairing the TV to the Samsung Smart Remote

When you turn on the TV for the first time, the Samsung Smart Remote pairs

to the TV automatically. If the Samsung Smart Remote does not pair to the TV

automatically, point it at the remote control sensor of the TV, and then press

and hold the buttons labelled

and as shown in the figure on the left

simultaneously for 3 seconds or more.

Installing batteries into the Samsung Smart Remote

To install the batteries (1.5V AA type), push the rear cover open in the direction of the arrow at the bottom of

the illustration, and then insert the batteries as shown in the figure. Make sure that the positive and negative

ends are facing in the correct direction. Close the rear cover as shown.

 Alkaline batteries are recommended for longer battery life.

English - 17

English

06 Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you

to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network

connection, at one time.

 Before starting the Initial Setup, be sure to connect external devices first.

 To use the TV's smart features, the TV must be connected to the Internet.

 To perform Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.

 If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device,

continue setup manually after adding the TV using Add Device on the dashboard of the SmartThings app.

 The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.

 Noise may occur temporarily when the TV communicates with mobile devices.

 TV setup has been optimised for Landscape mode.

You can also start the Initial Setup using the TV's menu (

> Settings > General > Reset).

Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your

viewing environment.

Using the TV Controller

You can turn on the TV with the TV Controller button at the top left of the TV, and then use the Control menu.

The Control menu appears when the TV Controller button is pressed while the TV is On. For more information

about its usage, refer to the figure below.

Control menu

:

Power off

:

Volume Up

:

Channel Up

:

Volume Down

:

Channel Down

:

Source

TV Controller button / Remote control sensor

 TV mode

– Press: Move

– Press & Hold: Select

 Art mode

– Press: Switch to the TV mode

The TV Controller button is located on the top left of the TV.

 In Art mode, the power indicator at the top left of the TV remains off.

English - 18

07 Connecting to a Network

Connecting the TV to a network gives you access to online services, such as Smart Hub, as well as software

updates.

Network Connection - Wireless

Connect the TV to the Internet using a wireless access point or modem.

Wireless IP access point or

modem with a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

English - 19

English

08 Troubleshooting and Maintenance

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Alternatively, review

the Troubleshooting or FAQ Section in the e-Manual. If none of these troubleshooting tips apply, please visit

“www.samsung.com” and click on Support, or contact the Samsung service centre listed on the back cover of

this manual.

 This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may

be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance

of the product.

 To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto update

functions on the TV's menu (

> Settings > Support > Software Update > Update Now or Auto update).

 In Portrait Mode, some apps or external inputs may not support the full screen.

The TV won’t turn on.

 Make sure that the AC power cord is securely plugged in to the One Connect and the wall outlet.

 Make sure that the wall outlet is working and the remote control sensor at the top left of the TV is lit and

glowing a solid red.

 Try pressing the TV Controller button at the top left of the TV to make sure that the problem is not with the

remote control. If the TV turns on, refer to “The remote control does not work”.

There is no picture/video/sound, or a distorted picture/video/sound from an external

device, or “Weak or No Signal” is displayed on the TV, or you cannot find a channel.

 Make sure the connection to the device is correct and that all cables are fully inserted.

 Remove and reconnect all cables connected to the TV and the external devices. Try new cables if possible.

 Confirm that the correct input source has been selected ( > Source).

 Perform a TV self diagnosis to determine if the problem is caused by the TV or the device ( > Settings

> Support > Device Care > Self Diagnosis > Picture Test or Sound Test).

 If the test results are normal, reboot the connected devices by unplugging each device's power cord and

then plugging it in again. If the issue persists, refer to the connection guide in the user manual of the

connected device.

 If you are not using a cable box or satellite box, and your TV is receiving TV signals from an antenna or a

cable wall connector, run Auto Tuning to search for channels (

> Settings > Broadcasting > (Auto

Tuning Settings) > Auto Tuning).

– The Auto Tuning Settings may not appear depending on the model or geographical area.

– If you are using a cable box or satellite box, please refer to the cable box or satellite box manual.

English - 20

La page charge ...

Samsung GQ32LS03TBK Manuel utilisateur

Ce manuel convient également à

Samsung GQ32LS03TBK Manuel utilisateur

dans d''autres langues

Documents connexes