Pride Mobility Jazzy ZTS Le manuel du propriétaire

Catégorie
Scooters
Taper
Le manuel du propriétaire

Ce manuel convient également à

Provider:
Détaillant:
Proveedor:________________________________________________________________________
Address:
Adresse:
Dirección:________________________________________________________________________
Telephone:
Téléphone:
Número de teléfono:________________________________________________________________
Purchase Date:
Date d’achat:
Fecha de compra:___________________________________________________________________
Please ll out the following information for quick reference:
S.V.P. veuillez compléter les informations ci dessous:
Por favor, rellene la siguiente información para tener siempre a mano:
UDI Label (if applicable)/UDI Étiquette (le cas échéant)/
UDI Label (indien van toepassing)/UDI Etikett (falls zutreffend)/
UDI Etichetta (se applicabile)/UDI Etiqueta (si es aplicable)
Serial #/série #/serie #
TRAVEL SCOOTER FEATURES TABLE
*NOTE: Travel Scooter options vary by country. Please contact your Provider to determine which options are available for your Travel Scooter.
Travel Scooter Series 3
S A F E T Y G U I D E L I N E S
WARNING! An authorized Provider or qualifi ed technician must perform the initial setup of this
scooter and must perform all of the procedures in this manual.
The symbols below are used throughout this owners manual and on the scooter to identify warnings and important
information. It is very important for you to read them and understand them completely.
WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated
procedures can cause either personal injury, component damage, or malfunction. On the
product, this icon is represented as a black symbol on a yellow triangle with a black border.
MANDATORY! These actions should be performed as specifi ed. Failure to perform mandatory
actions can cause personal injury and/or equipment damage. On the product, this icon is
represented as a white symbol on a blue dot with a white border.
PROHIBITED! These actions are prohibited. These actions should not be performed at any
time or in any circumstances. Performing a prohibited action can cause personal injury and/or
equipment damage. On the product, this icon is represented as a black symbol with a red circle
and red slash.
Copyright © 2021
INFMANU4392/Rev K/October 2021
NOTE: Please become familiar with your Travel Scooters model number. The number can be found on the
product specifi cation sheet in your owner’s package. Throughout this owners manual, Travel Scooter attributes
are indenti ed by model number (far left-hand column on Travel Scooter Features Table). Knowing your unit’s
model number will aid you in determining your particular Travel Scooter’s unique characteristics.
The intended use of the Pride Mobility Products device is to provide mobility to persons limited to a seated
position that have the capacity of operating a scooter.
CAUTION! Federal law restricts this device to sale by or on the order of a physician or other
certifi ed personnel licensed by the law of the State (US only) or region in which this personnel
practices to use or order the use of the device.
NOTE: This owners manual is compiled from the latest specifi cations and product information available at
the time of publication. We reserve the right to make changes as they become necessary. Any changes to our
products may cause slight variations between the illustrations and explanations in this manual and the product
you have purchased. The latest/current version of this manual is available on our website.
NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements.
NOTE: This product meets IPX4 classifi cation (IEC 60529).
NOTE: The Travel Scooter and its components are not made with natural rubber latex. Consult with the
manufacturer regarding any after-market accessories.
4 Travel Scooter Series
S A F E T Y G U I D E L I N E S
ADVISORY STATEMENT REGARDING CERTAIN COMPONENTRY INCORPORATED
BY THIRD-PARTY MANUFACTURERS INTO FINISHED TRAVEL SCOOTERS: When
scooters, seating systems, or other components are incorporated into a nished
Travel Scooter manufactured or assembled by any third party, that third party is
responsible to assure the safety, functionality, and legal compliance of the nished
Travel Scooter We make no representation concerning the safety, functionality, or
legal compliance of the nished Travel Scooter or its componentry manufactured
by a third party. While we make every effort to assure that our components are
distributed responsibly, manufacturers, distributors, and consumers are reminded
that nished Travel Scooters must comply with a variety of standards and
requirements for governmental safety and functionality.
If it is necessary to physically modify a Travel Scooter, including the addition of
third-party componentry, to accommodate the medical needs of the Travel Scooter
occupant, a risk assessment in conformance with ISO 14971, as outlined in ISO_
DIS_7176-19 (preliminary release), should be performed.
Changes to Travel Scooters that are likely to affect conformance and risk evaluation
include but are not limited to: moving the securement-point brackets; lowering
the back-support height; shortening the seat length; adding secondary postural
supports that are not rmly attached to the Travel Scooter; adding components
that have sharp edges (i.e., edges with less than 0.08 in. [2 mm] radius); or any
change that compromises the structural integrity of the Travel Scooter frame.
Travel Scooter Series 5
C O N T E N T S
SAFETY GUIDELINES ............................................................................................. 3
I. SAFETY ........................................................................................................... 6
II. YOUR TRAVEL SCOOTER .............................................................................. 8
III. BATTERIES AND CHARGING ....................................................................... 19
IV. OPERATION .................................................................................................. 26
V. COMFORT ADJUSTMENTS .......................................................................... 28
VI. DISASSEMBLY AND ASSEMBLY ................................................................. 32
VII. BASIC TROUBLESHOOTING ........................................................................ 34
VIII. CARE AND MAINTENANCE .......................................................................... 36
6 Travel Scooter Series
Manufactured in
Fully charge batteries before operating.
Remove key from an unattended Travel Scooter.
Read and follow the information in the owner’s manual.
I . S A F E T Y
PRODUCT SAFETY SYMBOLS
The symbols below are used on the Travel Scooter to identify warnings, mandatory actions, and prohibited actions.
It is very important for you to read and understand them completely.
NOTE: There are more warnings identifi ed and explained in the Consumer Safety Guide that is included
with your Travel Scooter. Please become familiar with all the warnings and safety information found in the
Consumer Safety Guide and refer to this resource often.
Indicates UNOCCUPIED Travel Scooter securement points.
Scooter information label
or
Does not meet ISO 7176-19 standards for occupied
transport in a motor vehicle. When travelling in a motor
vehicle, do not sit in your Travel Scooter.
or or
Travel Scooter Series 7
I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new Travel Scooter for the rst time without completely
reading and understanding this owner’s manual and the Consumer Safety Guide.
Your Travel Scooter is a state-of-the-art life-enhancement device designed to increase mobility. We provide an
extensive variety of products to best t the individual needs of the Travel Scooter user. Please be aware that the
nal selection and purchasing decision regarding the type of Travel Scooter to be used is the responsibility of the
Travel Scooter user who is capable of making such a decision and his/her healthcare professional (i.e., medical
doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly tted the
Travel Scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Provider
in the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the Travel Scooter user will need to practice
operating the Travel Scooter in the presence of a trained attendant. A trained attendant can be defi ned as a family
member or care professional specially trained in assisting a Travel Scooter user in various daily living activities.
As you begin using your Travel Scooter during daily activities, you will probably encounter situations in which
you will need some practice. Simply take your time and you will soon be in full and confi dent control as you
maneuver through doorways, on and off elevators, up and down ramps, and over moderate terrain.
Additional general information can be found on the supplemental information sheets and booklets included in
your Owners Package. Please fully read and review the information, and keep it readily available for future
reference.
Below are some precautions, tips, and other safety considerations that will help you become accustomed to
operating the Travel Scooter safely.
PRE-RIDE SAFETY CHECK
Get to know the feel of your Travel Scooter and its capabilities. We recommend that you perform a safety check
before each use to make sure your Travel Scooter operates smoothly and safely.
Perform the following inspections prior to using your Travel Scooter:
Check the condition of the tires. Make sure they are not damaged or excessively worn.
Check all electrical connections. Make sure they are tight and not corroded.
Check all harness connections. Make sure they are secured properly.
Check the brakes to ensure they operate properly.
Check the battery condition meter to ensure the batteries are fully charged.
Ensure the manual freewheel lever is in drive mode before sitting on the Travel Scooter.
If you discover a problem, contact your authorized Provider for assistance. Please refer to the Contact Information
insert in your Owners Package.
8 Travel Scooter Series
*Charger Power Cord Receptacle (Tiller Port) also functions as a Programming Port in Tiller Consoles E and F (see figures 5 and 6).
I I . YO U R T R AV E L S C O O T E R
Figure 1. Tiller Console A (Models 29, 36, 336, 40X, 44X)
Figure 2. Tiller Console B (Models 39, 40, 49, 83, 84)
TILLER CONSOLE
The tiller console houses all controls needed to drive your Travel Scooter, including the key switch, throttle
control lever, horn button, speed adjustment dial, and the battery condition meter. Please refer to the Travel
Scooter Features Table on the inside of the front cover of this owners manual to determine which console fi gure
to choose. See fi gures 1 through 7.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your Travel Scooter until the tiller
console has dried thoroughly.
IDENTIFICATION KEY FOR FIGURES 1 THROUGH 7
1. Horn
2. Key Switch
3. Battery Condition Meter
4. Speed Adjustment Dial
5. Throttle Control Lever
6. Charger Power Cord Receptacle
(Tiller Port)*
7. Off-board Charger Fuse
8. Light Fuse
9. Light Switch
10. USB Charger Port
11. Hi-Lo Switch
Travel Scooter Series 9
I I . YO U R T R AV E L S C O O T E R
Figure 3. Tiller Console C (Models 40E [Australia only], 44E [Australia only], 53HD, 54HD)
Figure 4. Tiller Console D (Models 40LX, 44LX, 50LX, 50LXLIT, 53, 54, 54LX, 54LXLIT, 73, 74)
Figure 5. Tiller Console E (Model Jazzy ZTS)
10 Travel Scooter Series
I I . YO U R T R AV E L S C O O T E R
Horn Button
This button activates a warning horn. Your Travel Scooter must be turned on for the horn to be operational. Do
not hesitate to use the warning horn when doing so may prevent accident or injury.
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your Travel Scooter.
Turn the key counterclockwise to power down (turn off ) your Travel Scooter.
WARNING! When faced with an emergency situation, switch off the key to power off the scooter.
Use caution. Be advised that turning off power to the scooter may cause the scooter to stop
abruptly. To release the emergency stop and restore driving capability to the scooter, release
the throttle control lever and then switch on the key to the scooter.
Although the key can be left in the key switch when the Travel Scooter is powered down, we recommend removing
it to prevent unauthorized use of your Travel Scooter.
WARNING! If the key is moved to the “offposition while your Travel Scooter is in motion, the
electronic brakes will engage and your Travel Scooter will come to an abrupt stop!
Figure 6. Tiller Console F (Models 66, 67)
Figure 7. Tiller Console G (Models AAP4, 40E, 44, 44E)
Travel Scooter Series 11
I I . YO U R T R AV E L S C O O T E R
Battery Condition Meter
When the key is fully inserted into the key switch and turned clockwise to power up your scooter, this meter indicates
approximate battery strength. For further information on the battery condition meter, see III. “Batteries and Charging.
Speed Adjustment Dial
This dial allows you to preselect and limit your Travel Scooters top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed
you preset with the speed adjustment dial.
NOTE: The throttle control lever operation instructions outlined below apply to scooters in a standard
confi guration. If the programming of your scooter was modifi ed in any way by a provider, contact that provider
for correct throttle control level operation instructions.
To use throttle control lever for models equipped with Tiller Consoles A and B:
To move Forward, use your right thumb to push the right side of the throttle control lever.
To move Rearward, use your left thumb to push the left side of the throttle control lever.
To use throttle control lever for models equipped with Tiller Consoles C, D, E, F, and G:
To move Forward, use either of the following:
Use your left thumb to push the left side of the throttle control lever.
Use your right hand fi ngers to pull back on the right side of the throttle control lever.
To move Rearward, use either of the following:
Use your right thumb to push the right side of the throttle control lever.
Use your left hand fi ngers to pull back on the left side of the throttle control lever.
Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side
of the lever. When the throttle control lever is completely released, it automatically returns to the center “stop”
position and engages your scooters brakes.
12 Travel Scooter Series
I I . YO U R T R AV E L S C O O T E R
High-Low Button
This switch toggles the scooters speed between Hi and Low. Toggle the switch forward (Hi) to achieve the
maximum preprogrammed speed for the scooter. Toggle the switch rearward (Low) to achieve half the maximum
preprogrammed speed of the scooter.
Lights Switch (If Equipped)
This switch controls your Travel Scooters lighting system. For all models, except 66 and 67, see fi gures 4 and 5.
Toggle the switch forward to turn on the lighting system.
Toggle the switch rearward to turn off the lighting system.
For models 66 and 67 (see fi gure 6):
Toggle switch rearward to activate the puddle light.
Toggle switch forward to activate the headlight.
Return switch to center position to deactivate lights.
WARNING! Scooter users are required to use their lights when visibility is restricted—day or
night.
WARNING! When your Travel Scooter is in freewheel mode, the braking system is disengaged.
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
After you have nished pushing your Travel Scooter, always return it to the drive mode to
lock the brakes.
Manual Freewheel Lever - Models AAP4, 29, 36, 336, 39, 40, 44, 40X, 44X, 40E, 44E, 40LX, 44LX,
49, 50LX, 50LXLIT, 53, 53HD, 54, 54HD, 54LX, 54LXLIT, 66, 67, 73, 74, 83, and 84
Whenever you need or want to push your Travel Scooter for short distances, you can put it in freewheel mode.
1. Locate the manual freewheel lever at the top right of the rear section.
2. Push forward on the manual freewheel lever to disable the drive system and the brake system. You may now
push your Travel Scooter.
3. Push the manual freewheel lever rearward to reengage the drive and the brake systems; this takes your Travel
Scooter out of freewheel mode.
IDENTIFICATION KEY
1. Manual Freewheel Lever
2. Motor/Transaxle Assembly
3. Anti-Tip Wheels
Figure 8. Rear Components
REAR COMPONENTS
The manual freewheel lever, anti-tip wheels, and motor/
transaxle assembly are located on your Travel Scooter as
shown. For all models, except Jazzy ZTS, see gure 8.
WARNING! Before placing your Travel
Scooter into or taking it out of freewheel
mode, remove the key from the key
switch. Never sit on a Travel Scooter
when it is in freewheel mode. Never put
a Travel Scooter in freewheel mode on
any incline.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical
unit that converts electrical energy from your Travel
Scooters batteries into the controlled mechanical energy
that drives the Travel Scooters wheels.
Travel Scooter Series 13
I I . YO U R T R AV E L S C O O T E R
Manual Freewheel Levers - Jazzy ZTS
For your convenience, your travel scooter has a manual freewheel lever on each motor. Manual freewheel levers
enable you to disable the drive system in order to maneuver the Travel Scooter manually. See fi gure 9.
WARNING! Do not use the Travel Scooter while the drive motors are disengaged! Do
not disengage the drive motors when the travel scooter is on an incline or decline,
as the unit could roll on its own! Only engage the freewheel mode when on a level
surface.
WARNING! It is important to remember that when your Travel Scooter is in freewheel
mode, the braking system is disengaged.
NOTE: It is strongly recommended that you do not charge your batteries while in freewheel mode.
NOTE: You must turn o the power before disabling the drive systems; otherwise, you may get an error code
on the scooter. To clear this code, turn off the scooter and place the travel scooter in drive mode. Then turn on
the scooter. The error message should be cleared. If not, contact an authorized Provider.
IDENTIFICATION KEY
1. Manual Freewheel Levers
2. Anti-tip Wheels
Figure 9. Rear Components - Jazzy ZTS
Freewheel Mode (Drive Disengaged)
Drive Mode (Drive Engaged)
To engage or disengage the drive system:
1. Locate the levers on the rear section of the scooter. See fi gure 9.
2. Pull the two levers toward the rear of the travel scooter to engage the drive motors (drive mode).
3. Push the two levers toward the front of the travel scooter to disengage the drive motors (freewheel mode).
If a lever is diffi cult to move in either direction, rock your travel scooter back and forth slightly. The lever should
then move to the desired position.
WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.
14 Travel Scooter Series
I I . YO U R T R AV E L S C O O T E R
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your Travel Scooter. They are bolted to the
frame at the rear of the Travel Scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your Travel Scooter in any way that is
not authorized by your Provider.
WARNING! The anti-tip wheels may cause interference with the smooth transition of your Travel
Scooter when ascending or descending a curb. Contact your authorized Provider for more
information.
BATTERY PACK
Your Travel Scooter is equipped with an innovative, easy-to-remove battery pack. A handle on the top of the
battery pack makes it easy to lift the pack off of the Travel Scooter with one hand. Depending on the confi guration
of your Travel Scooter, the battery pack contains eiter one or two rechargeable batteries, and may contain the
charger power cord receptacle, the main circuit breaker (reset button), and the battery pack fuse. See gures 10
and 11.
Main Circuit Breaker (Reset Button)
When the voltage in your Travel Scooters batteries becomes low or the Travel Scooter is heavily strained because
of excessive loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from
damage. See fi gures 10 and 11.
The main circuit breaker reset button pops out when the breaker trips.
When the breaker trips, the entire electrical system of your Travel Scooter shuts down.
Allow a minute or two for your Travel Scooters electronics to “rest.”
Push in the reset button to reset the main circuit breaker.
If the main circuit breaker trips frequently, you may need to charge your batteries more often.
If the main circuit breaker trips repeatedly, see your authorized Provider for service.
Charger Power Cord Receptacle
The end of the 3-pin charger power cord plugs into this receptacle. See fi gures 12 and 13.
Tiller Console Fuse (If Equipped)
The fuse located under the battery pack protects the tiller console electronics. See gure 10. In the event any
component of the tiller console is not responding, check this fuse. See VII. “Basic Troubleshooting” for fuse
replacement instructions.
Off-Board Battery Charger
The off -board battery charger, when plugged into the charger power cord receptacle and a standard electrical
outlet, charges the Travel Scooters batteries. See fi gure 14.
NOTE: See gures 12 and 13 to determine the appropriate XLR charging port based on the confi guration of
your scooter.
Travel Scooter Series 15
I I . YO U R T R AV E L S C O O T E R
IDENTIFICATION KEY
1. Battery Pack
2. Battery Pack Handle
3. Charger Power Cord Receptacle
4. Battery Pack Fuse
5. Main Circuit Breaker (Reset Button)
6. Battery Terminals
7. Tiller Console Fuse
Battery Pack Style A Battery Pack Style B Battery Pack Style D
Figure 10. Battery Pack
(Travel Scooter Deck)
(Travel Scooter Deck)
16 Travel Scooter Series
I I . YO U R T R AV E L S C O O T E R
Figure 11 Battery Box - Jazzy ZTS, 50LX, 50LXLIT, 54LX,
54LXLIT
IDENTIFICATION KEY
1. Top Battery Box Cover
2. Batteries
3. Charger Port
4. Battery Pack Fuse
5. Bottom Battery Box Cover
6. Circuit Breaker
Battery Pack Style E
Figure 12. Charger Power Cord Receptacle (Tiller
Mounted)
Figure 14. Off-board Battery ChargerFigure 13. Charger Power Cord Receptacle (Battery Pack)
IDENTIFICATION KEY
1. Tiller Console
2. Charger Power Cord Receptacle
Travel Scooter Series 17
I I . YO U R T R AV E L S C O O T E R
IDENTIFICATION KEY
Figure 15. Securement Points (Identified with black dots)
SECUREMENT POINTS
Always secure the Travel Scooter in a forward-facing position in the vehicle. Attach the four tie-down straps to
the designated securement points. See fi gure 15. Tighten the straps to suffi ciently remove all slack. Never attach
tie-downs to adjustable, moving, or removable parts of the Travel Scooter such as armrests, shrouds, and wheels.
These items should be removed. Position the anchor points for the rear tie-down straps directly behind the rear
securement points on the Travel Scooter. The front tie-down straps should anchor to oor points that are spaced
wider than the Travel Scooter to provide increased lateral stability.
WARNING! Ensure Travel Scooters are properly secured to the motor vehicle during transport.
Scooters that are not properly secured can become a hazard to the user and to other vehicle
passengers in the event of a crash, sudden stopping, or swerving, as the Travel Scooter could
tip or slide out of place.
1. Front Securement Points (3-wheel models)
1a. Models 83 and 84 only
1b. Models 29, 36, 336, 39, 40, 40X, 40E, 40LX, 50LX, 50LXLIT, 53, 53HD, and 73
1c. Model 66 only
2. Front Securement Points (4-wheel models)
Models AAP4, 44, 44X, 44E, 44LX, 49, 54, 54LX, 54LXLIT, 54HD, 67, 74, and Jazzy ZTS
3. Rear Securement Points
18 Travel Scooter Series
I I . YO U R T R AV E L S C O O T E R
Figure 16. Fender Panels
Figure 17. Tiller Console Visor
SHROUD PANELS
On certain models, you can change the color of your Travel
Scooter by removing the colored plastic shroud panel pieces
and replacing them with one of the other supplied sets. The
panels are held in place by a hook and loop reusable fastener.
See Travel Scooter Features Table (inside front cover).
To remove the shroud panel pieces:
1. Use your nger to locate the push hole behind each
shroud piece.
2. Push through the hole to separate the piece from the
Travel Scooter. See fi gure 16.
To remove the tiller console visor:
1. Gently pull the top of the visor away from the tiller
console, then slowly lift it up and away from the tiller
console. See fi gure 17.
To reinstall the shroud pieces, place each piece in its appropriate location and push with slight pressure to secure
the reusable fastener.
NOTE: When installing the front and rear fender panels, make sure the tab at the bottom of each panel is
inserted into the tab opening before securing the panel. See fi gure 16.
IDENTIFICATION KEY
1. Rear Fender Panel
2. Front Fender Panel
Travel Scooter Series 19
I I I . B AT T E R I E S A N D C H A R G I N G
BATTERIES AND CHARGING
Your Travel Scooter requires two long-lasting, 12-volt, deep-cycle batteries that are sealed and maintenance free.
They are recharged by the supplied off -board charging system.
Charge your Travel Scooters batteries for at least 8 to 14 hours prior to using it for the fi rst time.
Keep the batteries fully charged to keep your Travel Scooter running smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console indicates the approximate strength of your batteries using a
color code. From right to left on the meter, green indicates fully charged batteries, yellow a draining charge, and
red indicates that an immediate recharge is necessary. See gure 18. To ensure the highest accuracy, the battery
condition meter should be checked while operating your Travel Scooter at full speed on a dry, level surface.
NOTE: Ambient Meter (Battery Condition Meter 1c) adjusts brightness based on environmental lighting.
CHARGING YOUR BATTERIES
NOTE: With some models, the battery pack can be charged on or off
the Travel Scooter. See Travel Scooter Features Table.
NOTE: Models 66 and 67, both battery boxes can be removed from the
scooter and then attached together for easy charging. See Figure 19.
PROHIBITED! Removal of grounding prong can create
electrical hazard. If necessary, properly install an
approved 3-pronged adapter to an electrical outlet
having 2-pronged plug access.
PROHIBITED! Never use an extension cord to plug in
your battery charger. Plug the charger directly into a
properly wired standard electrical outlet.
PROHIBITED! Do not allow unsupervised children to
play near the Travel Scooter while the batteries are
charging. We recommend that you do not charge the
batteries while the Travel Scooter is occupied.
MANDATORY! Read the battery charging instructions
in this manual and in the manual supplied with the
battery charger before charging the batteries.
WARNING! Explosive gases may be generated while
charging the batteries. Keep the Travel Scooter and
battery charger away from sources of ignition such
as ames or sparks and provide adequate ventilation
when charging the batteries.
Figure 18. Battery Condition Meter
Figure 19. Battery Box Charging (Models
66 and 67)
20 Travel Scooter Series
I I I . B AT T E R I E S A N D C H A R G I N G
WARNING! You must recharge your Travel Scooter’s batteries with the supplied off-board
charger. Do not use an automotive-type battery charger.
WARNING! Inspect the battery charger, wiring, and connectors for damage before each
use. Contact your authorized Provider if damage is found.
WARNING! Do not attempt to open the battery charger case. If the battery charger does
not appear to be working correctly, contact your authorized Provider.
WARNING! If the battery charger is equipped with cooling slots, then do not attempt to
insert objects through these slots.
WARNING! Be aware that the battery charger case may become hot during charging. Avoid
skin contact and do not place on surfaces that may be affected by heat.
WARNING! If your battery charger has not been tested and approved for outdoor use,
then do not expose it to adverse or extreme weather conditions. If the battery charger
is exposed to adverse or extreme weather conditions, then it must be allowed to adjust
to the difference in environmental conditions before use indoors. Refer to the manual
supplied with the battery charger for more information.
Follow the 6 easy steps in fi gure 20 to charge your batteries safely:
Figure 20. Battery Charging Procedures Diagram
WARNING! The LED lights on the charger indicate different charger conditions at various times.
If the LED does not indicate that charging is complete within 24 hours, unplug the charger
from the outlet and contact your Provider. Refer to the operating instructions supplied with the
charger for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your Travel Scooter. The Travel Scooter will not run and
the battery condition meter will not operate while the batteries are charging (when the battery pack is being
charged on the Travel Scooter).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124

Pride Mobility Jazzy ZTS Le manuel du propriétaire

Catégorie
Scooters
Taper
Le manuel du propriétaire
Ce manuel convient également à