Zanussi ZWY61004WA Manuel utilisateur

Marque: Zanussi

Modèle: ZWY61004WA

Catégorie: Machines à laver

Taper: Manuel utilisateur

User Manual 2

Notice d'utilisation 17

ZWY 61004WA

Washing Machine

Lave-linge

Contents

Safety information 2

Safety instructions 3

Product description 4

Control panel description 5

Programme Chart 5

Consumption values

Options

Settings 8

Before first use 9

Daily use 9

Hints and tips 11

Care and cleaning 12

Troubleshooting

Technical Data

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the

supplied instructions. The manufacturer is not responsible if an

incorrect installation and use causes injuries and damages.

Always keep the instructions with the appliance for future

reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when it is

open.

• Cleaning and user maintenance shall not be made by children

without supervision.

General Safety

• Do not change the specification of this appliance.

• Obey the maximum load volume of 6 kg (refer to the

“Programme chart” chapter).

• The operating water pressure (minimum and maximum) must be

between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).

2 www.zanussi.com

• The ventilation openings in the base (if applicable) must not be

obstructed by a carpet.

• The appliance is to be connected to the water mains using the

new supplied hose-sets. Old hose sets must not be reused.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

• Before maintenance, deactivate the appliance and disconnect

the mains plug from the mains socket.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move the

appliance again you must block the drum.

• Always be careful when you move the

appliance because it is heavy. Always wear

safety gloves.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C or where it is

exposed to the weather.

• Make sure that the floor where you install the

appliance is flat, stable, heat resistant and

clean.

• Do not install the appliance where the

appliance door can not be fully opened.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary space

between the appliance and the carpet.

• Do not install the appliance where the

appliance lid can not be fully opened.

Electrical Connection

• The appliance must be earthed.

• Always use a correctly installed shockproof

socket.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Should

the mains cable need to be replaced, this

must be carried out by our Authorised

Service Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• Do not touch the mains cable or the mains

plug with wet hands.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Only for UK and Ireland: The appliance has a

13 amp mains plug. If it is necessary to

change the fuse in the mains plug, use a 13

amp ASTA (BS 1362) fuse.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Make sure not to cause damage to the water

hoses.

• Before you connect the appliance to new

pipes or pipes not used for a long time, let

the water flow until it is clean.

www.zanussi.com 3

• The first time you use the appliance, make

sure that there is no leakage.

Use

WARNING!

Risk of injury, electrical shock, fire,

burns or damage to the appliance.

• Use this appliance in a household only.

• Obey the safety instructions on the

detergent packaging.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

• Make sure that you remove all metal objects

from the laundry.

• Do not put a container to collect possible

water leakage under the appliance. Contact

the Authorised Service Centre to ensure

which accessories can be used.

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children

and pets to get closed in the appliance.

Product description

Appliance overview

Control panel

Lid

Lid handle

Feet for the appliance level

Rating plate

4 www.zanussi.com

Control panel description

7 8621 3 4 5

On / Off button (On/Off)

Programme selection touchpad

Temperature selection touchpad

Spin selection touchpad

Options selection touchpad

Start/Pause touchpad

Indicators:

Child lock indicator

Extra rinse indicator

Door locked indicator

Delay start touchpad

Programme Chart

Programme

Temperature

range

Maximum load

Maximum spin

speed

Programme description

(Type of load and soil level)

30' @ 30°

30 °C

2 kg

800 rpm

A short cycle for synthetics and delicate items with

light soil level or for items to freshen up.

Cottons

90 °C - Cold

6 kg

1000 rpm

White cotton and coloured cotton. Normal soil and light

soil.

Cotton Eco

60 °C - 40 °C

6 kg

1000 rpm

White cotton and colour-fast cotton. Normal soil. The

energy consumption decreases and the time of the washing

programme is extended.

Synthetics

60 °C - Cold

2,5 kg

1000 rpm

Synthetic items or mixed fabric items. Normal soil.

Delicates

40 °C - Cold

2,5 kg

1000 rpm

Delicate fabrics as acrylics, viscose, polyester items.

Normal soil.

www.zanussi.com 5

Programme

Temperature

range

Maximum load

Maximum spin

speed

Programme description

(Type of load and soil level)

Wool/Handwash

40 °C - Cold

1 kg

1000 rpm

Machine washable wool, hand washable wool and

delicate fabrics with «hand washing» care symbol.

Refresh 20 min

40 °C - 30 °C

1 kg

1000 rpm

Cottons and synthetics items with light soil level or

worn only once.

Mix 20°

20 °C

3 kg

1000 rpm

Special programme for cotton, synthetic and mixed fabrics

with light soil. Set this programme to decrease the energy

consumption. Make sure that the detergent is for low tem-

perature in order to have good washing results

1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these programmes are re-

spectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They are the most efficient programmes in

terms of combined energy and water consumption for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected programme.

2) During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum doesn't rotate or doesn't rotate properly.

Consider this as a normal functioning of the appliance.

3) No temperature indicator is on .

Programme options compatibility

Pro-

gramme

30' @ 30° ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■

1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing

results can be unsatisfactory. Recommended load: cotton: 3 kg, synthetics and delicates: 1,5 kg.

6 www.zanussi.com

Consumption values

The data of this table are approximate. Different causes can change the data: the quan-

tity and type of laundry, the water and ambient temperature.

Programmes Load

(kg)

Energy

consump-

tion (kWh)

Water con-

sumption

(litre)

Approxi-

mate pro-

gramme

duration

(minutes)

Remaining

moisture

(%)

Cottons 60 °C 6 1,50 65 200 60

Cottons 40 °C 6 0,85 62 190 60

Synthetics 40 °C 2,5 0,50 46 105 37

Delicates 40 °C 2,5 0,55 46 90 37

Wool/Handwash 30 °C 1 0,36 50 65 32

Standard cotton programmes

Standard 60 °C cotton 6 1,03 48 200 60

Standard 60 °C cotton 3 0,78 41 150 60

Standard 40 °C cotton 3 0,60 42 138 60

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0,48 0,48

The information given in the chart above are in compliance with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC.

Options

Temperature

With this option you can change the default

temperature.

Indicator = cold water.

The indicator of the set temperature comes on.

Spin

With this option you can change the default

spin speed.

The indicator of the set speed comes on.

Additional spin options:

No Spin

• Set this option to deactivate all spin phases.

Only the drain phase is available.

• The related indicator comes on.

• Set this option for very delicate fabrics.

• The rinses phase uses more water for some

washing programmes.

Rinse Hold

• Set this option to prevent the laundry

creases.

• The related indicator comes on.

• There is a water in the drum when the

programme is completed.

www.zanussi.com 7

• The drum turns regularly to prevent the

laundry creases.

• The lid stays locked. You must drain the

water to unlock the lid.

To drain the water refer to ‘At the

end of the programme’.

Quick

With this option you can decrease the

programme duration.

Use this option for items with light soil or items

to refresh.

The related indicator comes on.

Intensive

With this option you can wash very soiled

laundry.

The washing cycle lasts longer with this option.

The related indicator comes on.

Easy Iron

The appliance carefully washes and spins the

laundry to prevent the creases.

The appliance decreases the spin speed, uses

more water and adapts the programme duration

to the type of laundry.

The related indicator comes on.

Rinse only

With this option you can perform only a last

rinse of a selected washing programme.

If you set also the Extra Rinse function ( ) the

appliance adds two or more rinses.

The related indicator comes on.

Drain and Spin

With this option you can perform the spin and

drain cycle.

This spin phase is suitable to the washing

programme you set.

If you set also the No Spin ( )

option, the appliance only drains.

Delay Start

With this option you can delay the start of a

programme by 9, 6 or 3 hours.

The indicator of the set value is on.

Extra Rinse

With this option you can add some rinses to a

washing programme.

Use this option for persons allergic to

detergents and in areas where the water is soft.

The related indicator comes on.

Settings

Extra Rinse

With this option you can permanently have an

extra rinse when you set a new programme.

• To activate/deactivate this option touch

the buttons and at the same time until

the indicator comes on/goes off.

Child Lock

With this option you can prevent that the

children play with the control panel.

• To activate/deactivate this option, touch

the buttons and at the same time until

the indicator comes on/goes off.

Activate this option after you touch the button

: the buttons are locked (except for the

button ) .

1 See in "Settings" how to activate this option.

8 www.zanussi.com

This option stays active even when

you switch off the appliance.

Acoustic signals

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,

touch the buttons and at the same time

for 4 seconds.

If you deactivate the acoustic

signals, they continue operate when

the appliance has a malfunction.

Before first use

1. Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton at the

highest temperature without laundry.

This removes all possible dirt from the drum and

the tub.

Daily use

WARNING!

Refer to Safety chapters.

Loading the laundry

1. Open the appliance lid.

2. Push the button A.

The drum opens automatically.

3. Put the laundry in the drum, one item at a

time.

4. Shake the items before you put them in the

appliance.

Make sure not to put too much laundry in the

drum.

5. Close the drum and the lid.

CAUTION!

Before you close the lid of your

appliance, make sure that you close

the drum correctly.

Using detergent and additives

Measure out the detergent and the fabric

conditioner.

Detergent compartments

Detergent compartment for washing

phase.

Compartment for liquid additives

(fabric conditioner, starch).

CAUTION!

Do not exceed the

MAX level.

Activating the appliance

Press and hold for a couple of seconds the

button to activate or deactivate the appliance.

A tune sounds when the appliance is activated.

The appliance performs a start up animation.

The animation quickly shows each washing

programme and the default temperature and

spin settings.

Setting a programme

1. Touch the programme button and set the

programme:

www.zanussi.com 9

• The indicator of the button flashes

slowly.

2. If necessary, change the temperature and

the spin speed or add available options.

When you activate an option, the indicator

of the set option comes on.

If you set something incorrect, the

indicator of the button flashes

red three times.

Starting a programme without the delay

start

Touch the button .

• The indicator of the button stops to

flash and stays on.

• The programme starts, the lid locks, the

indicator is on.

The drain pump can operate for a

short time at the beginning of the

washing cycle.

Starting a programme with the delay

start

The start of the programme can be delayed by

9, 6 or 3 hours.

1. Touch the button

to choose the delay

you want to set.

The indicator of the selected delay is on.

2. Touch the button :

• The appliance starts the countdown.

• When the countdown is completed, the

programme starts automatically.

You can cancel or change the set of

the delay start before you touch the

button . After touching the

button you can only cancel the

delay.

To cancel the delay start:

1. Touch the button to set the appliance

to pause.

2. Touch the button until the indicator of

the set delay goes off.

Touch the button again to start the

programme immediately.

Interrupting a programme and changing

the options

You can change only some options before they

operate.

1. Touch .

The indicator of this button flashes.

2. Change the options.

3. Touch again.

The programme continues.

Cancelling a programme

1. Press the button for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

The appliance does not drain the

water. The water left in a drum can

be used for the next washing cycle.

Opening the lid

While a programme or the delay start operates,

the appliance lid is locked. The indicator

on.

CAUTION!

If the temperature and level of the

water in the drum are too high, you

cannot open the lid.

To open the lid during the first minutes of

the cycle or when the delay start operates:

1. Touch the button

to pause the

appliance.

2. Wait a couple of minutes until the indicator

goes off.

3. You can open the lid.

4. Close the lid and touch the button

again. The programme (or the delay start)

continues.

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is

activated).

1 The indicator blinks when the lid is unlocking.

10 www.zanussi.com

• The indicator of the button goes off.

• The lid lock indicator blinks (when the lid

is unlocking) and then goes off.

• You can open the lid.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Press the button for some seconds to

deactivate the appliance.

• Close the water tap.

• Keep the lid ajar, to prevent the mildew and

odours.

The washing programme is completed,

but there is water in the drum:

• The drum turns regularly to prevent the

creases in the laundry.

• The indicator flashes to remind you to

drain the water.

• The lid lock indicator is on. The indicator

of button flashes. The lid stays locked.

• You must drain the water to open the lid.

Draining the water:

1. To drain the water.

• Touch the button . The appliance

drains the water and spins with the

maximum spin speed for selected

washing programme.

• Alternatively, touch the button to

change the spin speed and then touch

the button . The appliance drains the

water and spins. If you set , the

appliance only drains.

2. When the programme is completed and

after a couple of minutes the lid lock

indicator goes off, you can open the lid.

3. Press the button for some seconds to

deactivate the appliance.

The appliance drains and spins

automatically after approximately 18

hours (except for Wool programme).

AUTO-OFF option

The AUTO-OFF stand-by option automatically

deactivates the appliance to decrease the

energy consumption. All the indicators go off

when :

• You do not use the appliance for 5 minutes

before you touch .

Press the button to activate the appliance

again.

• After 5 minutes from the end of the washing

programme.

Press the button to activate the appliance

again.

Touch the button if you want to set a new

cycle.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

• Some coloured items can discolour with the

first wash. We recommend that you wash

them separately for the first times.

• Button up pillowcases, close zippers, hooks

and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool

and items with painted illustrations.

• Remove hard stains.

• Wash with a special detergent heavy soil

stains.

• Be careful with the curtains. Remove the

hooks or put the curtains in a washing bag

or pillowcase.

• Do not wash in the appliance laundry without

hems or with cuts. Use a washing bag to

wash small and/or delicate items (e.g.

underwired bras, belts, tights, etc. ).

• A very small load can cause balance

problems with the spin phase. If this occurs,

adjust manually the items in the tub and start

the spin phase again.

Stubborn stains

For some stains, water and detergent is not

sufficient.

We recommend that you remove these stains

before you put the items in the appliance.

www.zanussi.com 11

Special stain removers are available. Use the

special stain remover that is applicable to the

type of stain and fabric.

Detergents and additives

• Only use detergents and additives specially

made for washing machines:

– powder detergents for all types of fabric,

– powder detergents for delicate fabrics

(40 °C max) and woollens,

– liquid detergents, preferably for low

temperature wash programmes (60 °C

max) for all types of fabric, or special for

woollens only.

• Do not mix different types of detergents.

• To help the environment, do not use more

than the correct quantity of detergent.

• Obey the instructions that you find on the on

packaging of these products.

• Use the correct products for the type and

colour of the fabric, the programme

temperature and the level of soil.

• If your appliance has not the detergent

dispenser with the flap device, add the liquid

detergents with a dosing ball (supplied by

the detergent's manufacturer).

Ecological hints

• Set a programme without the prewash

phase to wash laundry with normal soil.

• Always start a washing programme with the

maximum load of laundry.

• If necessary, use a stain remover when you

set a programme with a low temperature.

• To use the correct quantity of the detergent,

check the water hardness of your domestic

system

Water hardness

If the water hardness in your area is high or

moderate, we recommend that you use a water

softener for washing machines. In areas where

the water hardness is soft it is not necessary to

use a water softener.

To know the water hardness in your area,

contact your local water authority.

Use the correct quantity of the water softener.

Obey the instructions that you find on the

packaging of the product.

Care and cleaning

WARNING!

Refer to Safety chapters.

External cleaning

Clean the appliance only with soap and warm

water. Fully dry all the surfaces.

CAUTION!

Do not use alcohol, solvents or

chemical products.

Descaling

If the water hardness in your area is high or

moderate, we recommend that you use a water

descaling product for washing machines.

Regularly examine the drum to prevent limescale

and rust particles.

To remove rust particles use only special

products for washing machine. Do this

separately from the laundry wash.

Always obey the instructions that

you find on the packaging of the

product.

Maintenance wash

With the low temperature programmes it is

possible that some detergent stays in the drum.

Make regularly a maintenance wash. To do this:

• Remove the laundry from the drum.

• Set the cotton programme with the highest

temperature with a small quantity of

detergent.

Lid seal

Regularly examine the seal. Clean it when

needed, using ammonia cream cleanser agent

without scratching the seal surface,

Always obey the instructions that

you find on the packaging of the

product.

12 www.zanussi.com

Cleaning the detergent dispenser

1 2

3 4

Cleaning the drain filter

CLACK

Cleaning the inlet hose and the valve

filter

1 2

90˚

Frost precautions

If the appliance is installed in an area where the

temperature can be less than 0 °C, remove the

remaining water from the inlet hose and the

drain pump.

www.zanussi.com 13

Do this procedure also when you

want to do the emergency drain.

1. Disconnect the mains plug from the mains

socket.

2. Close the water tap and disconnect the

water inlet hose.

3. Disconnect the drain hose from a sink or

spigot.

4. Put the ends of the drain and inlet hose in a

container. Let the water flow out of the

hoses.

5. Connect the mains plug to the mains socket

and activate the appliance again.

6. Set any washing cycle together with the

option "Drain and Spin" and let it operate

until the end of the cycle.

7. Press the button to deactivate the

appliance.

8. Disconnect the appliance from the mains

socket.

WARNING!

Make sure that the temperature is more than 0

°C before you use the appliance again. The

manufacturer is not responsible for damages

caused by low temperatures.

Troubleshooting

WARNING!

Refer to Safety chapters.

Introduction

The start of the appliance does not occur or it

stops during operation.

First try to find a solution to the problem (refer

to the table). If not, contact the Authorised

Service Centre.

With some problems, the acoustic signals

operate. The indicator of button

flashes in

red and one of the indicators comes on, to

show an alarm code:

• - The appliance does not fill with water

properly.

• - The appliance does not drain the water.

• - The appliance lid or drum doors are

open or not closed correctly. Please check

both!

• The indicator of button flashes in red 11

times and 1 (or 2 or 3) time(s) in yellow: The

mains supply is unstable. Wait until the

mains supply is stable.

WARNING!

Deactivate the appliance before you

do the checks.

Possible failures

Problem Possible solution

The programme does not

start.

• Make sure that the mains plug is connected to the mains socket.

• Make sure that the appliance lid and drum doors are closed properly.

• Make sure that there is not a damaged fuse in the fuse box.

• Make sure that the Start/Pause has been pressed.

• If the delay start is set, cancel the setting or wait for the end of count-

down.

• Deactivate the Child Lock function if it is on.

14 www.zanussi.com

Problem Possible solution

The appliance does not fill

with water properly.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too low. For

this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter of the inlet hose and the filter of the valve are

not clogged. Refer to “Care and cleaning”.

• Make sure that the inlet hose has no kinks or bends.

• Make sure that the connection of the water inlet hose is correct.

The appliance does not drain

the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the connection of the drain hose is correct.

• Set the drain option if you set a programme without drain phase.

• Set the drain option if you set an option which ends with water in the

drum.

• If above mentioned solutions do not help, contact the Authorised

Service Centre (as the filter of the drain pump may be clogged).

The spin phase does not op-

erate or the washing cycle

lasts longer than usually.

• Adjust manually the items in the tub and start the spin phase again.

This problem may be caused by balance problems.

• Set the spin option.

• Set the drain option if you set an option which ends with water in the

drum.

• If above mentioned solutions do not help, contact the Authorised

Service Centre (as the filter of the drain pump may be clogged).

There is water on the floor.

• Make sure that the couplings of the water hoses are tight and there is

not water leakages.

• Make sure that the water inlet hose and the drain hose have no dam-

ages.

• Make sure you use the correct detergent and the correct quantity of

it.

You cannot open the appli-

ance lid.

• Make sure that the washing programme is finished.

• Set the drain or the spin option if there is water in the drum.

The appliance makes an un-

usual noise.

• Make sure the levelling of the appliance is correct. Refer to 'Installa-

tion instruction'.

• Make sure that the packaging and/or the transit bolts are removed.

Refer to 'Installation instruction'.

• Add more laundry in the drum. The load may be too small.

The appliance fills with water

and drain immediately.

• Make sure that the drain hose is in the correct position. The end of

the hose may be too low. Refer to 'Installation instruction'.

The washing results are not

satisfactory.

• Increase the detergent quantity or use a different detergent.

• Use special products to remove the stubborn stains before you wash

the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

You cannot set an option.

• Make sure that you press only the wanted touch button(s).

www.zanussi.com 15

After the check, activate the appliance. The

programme continues from the point of

interruption.

If the problem occurs again, contact the

Authorised Service Centre.

If the appliance shows other alarm codes (the

indicator of button flashes in red).

Deactivate and activate the appliance. If the

problem continues, contact the Authorised

Service Centre.

Service

We recommend the use of original spare parts.

When contacting the Authorised Service

Centre, make sure that these data are available.

You can find the information on the rating plate:

model (Mod.), PNC (Prod.No.), Serial number

(Ser.No.).

Technical Data

Dimension Width/ Height/ Depth/ Total

depth

400 mm/ 890 mm/ 600 mm/ 600 mm

Electrical connection Voltage

Overall power

Fuse

Frequency

230 V

2200 W

10 A

50 Hz

Level of protection against ingress of solid particles and

moisture ensured by the protective cover, except where the

low voltage equipment has no protection against moisture

IPX4

Water supply pressure Minimum

Maximum

0,5 bar (0,05 MPa)

8 bar (0,8 MPa)

Water supply

Cold water

Maximum Load Cotton 6 kg

Energy Efficiency Class A+

Spin Speed Maximum 1000 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it. Help protect the environment and

human health and to recycle waste of electrical

and electronic appliances. Do not dispose

appliances marked with the symbol with the

household waste. Return the product to your

local recycling facility or contact your municipal

office.

16 www.zanussi.com

Table des matières

Consignes de sécurité 17

Instructions de sécurité 18

Description de l'appareil 19

Description du bandeau de commande 20

Tableau des programmes 20

Valeurs de consommation

Options

Réglages 24

Avant la première utilisation 24

Utilisation quotidienne 24

Conseils 27

Entretien et nettoyage 28

En cas d'anomalie de fonctionnement

Caractéristiques techniques

Sous réserve de modifications.

Consignes de sécurité

Avant d'installer et d'utiliser cet appareil, lisez soigneusement les

instructions fournies. Le fabricant ne peut être tenu pour

responsable des dommages et blessures liés à une mauvaise

installation ou utilisation. Conservez toujours cette notice avec

votre appareil pour vous y référer ultérieurement.

Sécurité des enfants et des personnes vulnérables

• Cet appareil peut être utilisé par des enfants âgés d'au moins 8

ans et par des personnes ayant des capacités physiques,

sensorielles ou mentales réduites ou dénuées d’expérience ou

de connaissance, s’ils (si elles) sont correctement surveillé(e)s

ou si des instructions relatives à l’utilisation de l'appareil en

toute sécurité leur ont été données et si les risques encourus

ont été appréhendées.

• Les enfants ne doivent pas jouer avec l’appareil.

• Ne laissez pas les emballages à la portée des enfants.

• Ne laissez pas les détergents à la portée des enfants.

• Tenez les enfants et les animaux éloignés de la porte de

l'appareil lorsque celle-ci est ouverte.

• Le nettoyage et l’entretien par l'usager ne doivent pas être

effectués par des enfants sans surveillance.

Sécurité générale

• Ne modifiez pas les caractéristiques de cet appareil.

• Respectez la charge maximale de 6 kg (reportez-vous au

chapitre « Tableau des programmes »).

www.zanussi.com 17

• La pression de l'eau en service (minimale et maximale) doit être

comprise entre 0,5 bar (0,05 MPa) et 8 bar (0,8 MPa).

• Les orifices d'aération situés à la base (si présents) ne doivent

pas être obstrués par de la moquette.

• L'appareil doit être raccordé au réseau de distribution d'eau en

utilisant les ensembles de raccordement neufs fournis avec

l'appareil, il convient de ne pas réutiliser des ensembles de

raccordement usagés.

• Si le câble d'alimentation est endommagé, il doit être remplacé

par le fabricant, son service après-vente ou des personnes de

qualification similaire afin d'éviter un danger.

• Avant toute opération d'entretien, éteignez l'appareil et

débranchez la fiche de la prise secteur.

• Ne pulvérisez pas d'eau ni de vapeur pour nettoyer l'appareil.

• Nettoyez l'appareil avec un chiffon doux humide. Utilisez

uniquement des produits de nettoyage neutres. N'utilisez pas

de produits abrasifs, de tampons à récurer, de solvants ni

d'objets métalliques.

Instructions de sécurité

Instructions d’installation

• Retirez l'intégralité de l'emballage et les

boulons de transport.

• Conservez les boulons de transport. Si vous

devez déplacer à nouveau l'appareil, il est

conseillé de bloquer le tambour.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd. Portez

toujours des gants de sécurité.

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les instructions

d'installation fournies avec l'appareil.

• N'installez pas l'appareil ou ne l'utilisez pas

dans un endroit où la température ambiante

est inférieure à 0 °C ou dans un endroit

exposé aux intempéries.

• Assurez-vous que le sol sur lequel vous

installez l'appareil est plat, stable, résistant à

la chaleur et propre.

• N'installez pas l'appareil dans un endroit où il

ne pourrait pas être complètement ouvert.

• Assurez-vous que de l'air circule entre

l'appareil et le sol.

• Réglez les pieds pour laisser un espace

suffisant entre l'appareil et la surface en

moquette.

• N'installez pas l'appareil dans un endroit où il

ne pourrait pas être complètement ouvert.

Branchement électrique

• L'appareil doit être relié à la terre.

• Utilisez toujours une prise de courant de

sécurité correctement installée.

• Vérifiez que les données électriques figurant

sur la plaque signalétique correspondent à

celles de votre réseau. Si ce n'est pas le cas,

contactez un électricien.

• N'utilisez pas d'adaptateurs multiprises ni de

rallonges.

• Veillez à ne pas endommager la fiche

secteur ni le câble d'alimentation. Le

remplacement du cordon d'alimentation de

l'appareil doit être effectué par notre service

après-vente.

• Ne connectez la fiche d'alimentation secteur

à la prise de courant secteur qu'à la fin de

l'installation. Assurez-vous que la fiche

18 www.zanussi.com

d'alimentation est accessible une fois

l'appareil installé.

• Ne touchez jamais le câble d'alimentation ni

la fiche avec des mains mouillées.

• Ne tirez jamais sur le câble d'alimentation

électrique pour débrancher l'appareil. Tirez

toujours sur la fiche.

• Pour le Royaume-Uni et l'Irlande

uniquement : L'appareil est livré avec une

fiche secteur de 13 ampères. Si vous devez

changer le fusible de la fiche secteur, utilisez

un fusible 13 A approuvé ASTA (BS 1362).

• Cet appareil est conforme aux directives

CEE.

Raccordement à l'arrivée d'eau

• Veillez à ne pas endommager les tuyaux de

circulation d'eau.

• Avant de brancher l'appareil à des tuyaux

neufs ou n'ayant pas servi depuis longtemps,

laissez couler l'eau jusqu'à ce qu'elle soit

propre.

• Avant d'utiliser l'appareil pour la première

fois, assurez-vous de l'absence de fuites.

Utilisation

AVERTISSEMENT!

Risque de blessure, de choc

électrique, d'incendie, de brûlures ou

de dommage matériel à l'appareil.

• Utilisez cet appareil uniquement dans un

environnement domestique.

• Suivez les consignes de sécurité figurant sur

l'emballage du produit de lavage.

• Ne placez pas de produits inflammables ou

d'éléments imbibés de produits inflammables

à l'intérieur ou à proximité de l'appareil, ni sur

celui-ci.

• Veillez à retirer tout objet métallique du linge

avant chaque lavage.

• Ne placez aucun récipient sous l'appareil

pour récupérer tout éventuel écoulement.

Contactez le service après-vente agréé pour

connaître les accessoires disponibles.

Mise au rebut

AVERTISSEMENT!

Risque de blessure ou d'asphyxie.

• Débranchez l'appareil de l'alimentation

électrique.

• Coupez le câble d'alimentation et mettez-le

au rebut.

• Retirez le dispositif de verrouillage de la

porte pour empêcher les enfants et les

animaux de s'enfermer dans l'appareil.

Description de l'appareil

Vue d'ensemble de l'appareil

Bandeau de commande

Couvercle

Poignée du couvercle

Pieds pour la mise de niveau de l'appareil

Plaque signalétique

www.zanussi.com 19

Description du bandeau de commande

7 8621 3 4 5

Touche Marche / Arrêt (Marche/Arrêt)

Touche de sélection de programme

Touche de sélection de température

Touche de sélection d'essorage

Touche de sélection d'options

Touche Départ/Pause

Voyants :

Voyant Sécurité enfants

Indicateur Rinçage plus

Voyant Couvercle verrouillé

Touche Départ différé

Tableau des programmes

Programme

Plage de tem-

pératures

Charge maxi-

male

Vitesse d'es-

sorage maxi-

male

Description des programmes

(Type de charge et degré de salissure)

30' @ 30°

30 °C

2 kg

800 tr/min

Un cycle court pour les vêtements synthétiques et déli-

cats légèrement sales ou pour les vêtements à rafraîchir.

Blanc/Couleurs

90 °C - Froid

6 kg

1000 tr/min

Coton blanc et couleurs. Normalement sale ou légère-

ment sale.

Coton Eco

60 °C - 40 °C

6 kg

1000 tr/min

Coton blanc et couleurs grand teint. Normalement sale.

La consommation d'énergie diminue et la durée du pro-

gramme de lavage est prolongée.

Synthetics (Synthé-

tiques)

60 °C - Froid

2,5 kg

1000 tr/min

Articles en textiles synthétiques ou mixtes. Normale-

ment sale.

20 www.zanussi.com

La page charge ...

Zanussi ZWY61004WA Manuel utilisateur

Marque: Zanussi

Modèle: ZWY61004WA

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Zanussi ZWY61004WA User manual

Zanussi ZWY61004WA Manuel utilisateur

Zanussi ZWY61004WA Manuel utilisateur

dans d''autres langues

Documents connexes