Nvidia Quadro RTX Guide de démarrage rapide

QUADRO

RTX

™

QUICK START GUIDE

Thank you for choosing an NVIDIA

®

Quadro

RTX

™

graphics card. Before you begin set-up,

review the following Minimum System

Requirements list to ensure your system

meets the minimum hardware and software

speciﬁcation for your graphics card.

EN

01

MINIMUM SYSTEM

REQUIREMENTS

Minimum System Requirements

> Motherboard

PCI Express x16 slot

> Operating System

∙ Microsoft Windows 10, 8, 7 (64-bit)

∙ Linux 64-bit on:

- Red Hat Enterprise Linux 6.x

- SUSE Linux Enterprise Desktop 12.x

- OpenSUSE 11.x

- Fedora 19

- Ubuntu 16.04

∙ FreeBSD 11.x

∙ Solaris 11

> Processor

∙ Intel Core i5, i7 or Xeon processor or later

∙ AMD Phenom or Opteron class processor

or later

> System Memory

Greater than or equal to GPU memory; twice the

GPU memory recommended

> Internet connection for driver installation

EN

Included equipment with each NVIDIA Quadro RTX

graphics card.

02

EQUIPMENT

RTX 8000

RTX 6000

RTX 5000

RTX 4000

Quick Start Guide Yes Yes Yes Yes

Support Guide Yes Yes Yes Yes

DisplayPort to DVI Adapter 1 1 1 1

DisplayPort to HDMI Adapter 1 1 1 1

USB-C to DisplayPort Adapter N/A N/A N/A 1

Auxiliary Power Cable

(8-pin to dual 6-pin Adapter)

1 1 1 N/A

EN

02

EQUIPMENT

!

Attention: Static electricity can severely

damage electronic components. Take the

following precautions when installing your new

NVIDIA Quadro graphics card:

> Before touching any electronic parts,

discharge the static electricity from your

body by touching the internal metal frame of

your system while it is unplugged.

> Do not remove your card from the packaging

clamshell until you are ready to install it.

Whenever you remove a card from your

system, always place it back in the clamshell.

> Do not allow clothing or jewelry touch any

electronic parts.

> When handling your graphics card, hold it by

the edges and avoid touching any circuitry or

the PCIe connector.

1 Remove the current graphics driver installed on

the host system.

2 Power down your system.

3 Unplug the power cord from the AC power source.

4 Remove the side panel from your system to gain

access to the motherboard.

Note: Reference your speciﬁc computer

documents for instructions on accessing

the motherboard in your computer.

EN

03

HARDWARE

INSTALLATION

5 Remove the existing graphics card if present. If a

retention bar is holding the card in place, remove

the screw securing the card. OR, If there is no

existing graphics card, remove the access covers

from the primary x16 PCI slot.

The Quadro RTX 4000 is a single slot

GPU and will only require removing

one PCI x16 slot cover. The Quadro

RTX 8000, RTX 6000, and RTX 5000

are dual-slot GPUs and will require

removing two adjacent slot covers.

6 Install the card into the primary x16 PCI slot.

Press gently on the card until it is seated securely

in the slot.

Install the graphics card into the primary x16 PCI slot.

The Quadro RTX 8000, RTX 6000, and RTX 5000 are

dual-slot GPUs and will cover the adjacent slot.

EN

7 Secure the card to the system frame using the

screw(s) removed in step 5.

8 Connect the auxiliary power cable from the power

supply to the back edge of the Quadro RTX 8000,

Quadro RTX 6000, Quadro RTX 5000 or Quadro

RTX 4000 GPU.

For Quadro RTX 8000, RTX 6000, and RTX 5000, use the

8-pin to dual 6-pin auxiliary cable if the power supply

does not have a 6-pin auxiliary cable. Connecting a

single 8-pin or 6-pin auxiliary cable directly to the

graphics card is not recommended.

Note: Use the recommended power

connector guidelines at www.nvidia.com/

quadropowerguidelines.

9 Install the side panel removed in step 4.

EN

1 Connect the display cable(s) to your GPU.

2 Reconnect your power cord to the workstation.

DisplayPort Connectors

RTX 8000/6000/5000 (x4)

RTX 4000 (x3)

USB type-C

™

Connector

RTX 8000/

6000/5000

RTX 4000

04

CONNECTING TO

THE DISPLAY

Driver Installation: With the hardware installed, it is

now time to install the graphics driver.

1 Power up your computer, start Windows or Linux,

and login with an account that has Administrator

rights.

Note: Since there is no GPU driver

currently loaded, the display may run at

reduced resolution or image quality.

2 Download and install the driver.

∙ Go to www.nvidia.com/drivers and set the

“Product Type” to Quadro.

EN

05

SOFTWARE INSTALLATION

AND CONFIGURATION

∙ Use the various drop down menus to select

your graphics card, operating system and then

set the “Download Type” to Optimal Driver for

Enterprise (ODE).

∙ Launch the downloaded executable ﬁle,

then follow the installer guides to complete

installation.

The installer may require you to reboot your

system once the driver installation is complete.

Congratulations! Your NVIDIA Quadro

graphics card is now ready to use!

Nous vous remercions d’avoir choisi une

carte graphique NVIDIA

®

Quadro RTX

™

.

Avant de commencer, veuillez consulter la

conﬁguration système minimale pour vous

assurer que votre système correspond aux

spéciﬁcations matérielles et logicielles

requises pour votre carte graphique.

FR

01

CONFIGURATION SYSTÈME

MINIMALE

Conﬁguration système minimale

> Carte mère

Emplacement PCI Express x16

> Système d’exploitation

∙ Microsoft Windows 10, 8, 7 (64-bit)

∙ Linux 64-bit on:

- Red Hat Enterprise Linux 6.x

- SUSE Linux Enterprise Desktop 12.x

- OpenSUSE 11.x

- Fedora jusqu’à la version 19

- Ubuntu 16.04

∙ FreeBSD 11.x

∙ Solaris 11

> Processeur

∙ Intel Core i5, i7, Xeon ou plus

∙ AMD Phenom, Opteron ou plus

> Mémoire système

Égale ou supérieure à la mémoire GPU (le double

de mémoire est recommandé)

> Une connexion Internet est requise pour

l’installation du pilote

FR

Équipement fourni avec chaque carte graphique

NVIDIA Quadro RTX.

02

ÉQUIPMENT

La page charge ...

Nvidia Quadro RTX Guide de démarrage rapide

Nvidia Quadro RTX Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents