ESSENTIELB ETVH 43s Le manuel du propriétaire

Marque: ESSENTIELB

Modèle: ETVH 43s

Catégorie: Plaques de cuisson

Taper: Le manuel du propriétaire

Table de cuisson vitrocéramique

ETVH43S

CONTENTS

Safety information 2

Safety instructions 3

Product description 6

Daily use 7

Hints and tips 10

Care and cleaning 11

Troubleshooting 11

Installation 13

Technical data 15

Energy efficiency 16

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of it

appropriately.

• Keep children and pets away from the appliance when it

operates or when it cools down. Accessible parts are hot.

• If the appliance has a child safety device, this should be

activated.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

• Children aged 3 years and under must be kept away from

this appliance when it is in operation at all times.

General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements. Children less than 8 years of

age shall be kept away unless continuously supervised.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or oil

can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch off the

appliance and then cover flame e.g. with a lid or a fire

blanket.

• CAUTION: The cooking process has to be supervised. A

short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they can get

hot.

• Do not use a steam cleaner to clean the appliance.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance to avoid the possibility of electric

shock.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorized Service or similarly qualified

persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by the

manufacturer of the appliance in the instructions for use as

suitable or hob guards incorporated in the appliance. The

use of inappropriate guards can cause accidents.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this

appliance.

WARNING! Risk of injury or

damage to the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent to

a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the window

is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a separation

panel made from plywood, kitchen

carcass material or other non-

flammable materials under the

appliance to prevent access to the

bottom.

Electrical Connection

WARNING! Risk of fire and

electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation make

sure that the appliance is disconnected

from the power supply.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect electricity

mains cable or plug (if applicable) can

make the terminal become too hot.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation device

must have a contact opening width of

minimum 3 mm.

Use

WARNING! Risk of injury,

burns and electrical shock.

• Remove all the packaging, labelling

and protective film (if applicable) before

first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after each

use.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• When you place food into hot oil, it may

splash.

WARNING! Risk of fire and

explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

WARNING! Risk of damage to

the appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the glass

surface of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones with

empty cookware or without cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron, aluminium

or with a damaged bottom can cause

scratches on the glass / glass ceramic.

Always lift these objects up when you

have to move them on the cooking

surface.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

Care and cleaning

• Clean regularly the appliance to

prevent the deterioration of the surface

material.

• Deactivate the appliance and let it cool

down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products,

abrasive cleaning pads, solvents or

metal objects.

Disposal

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

PRODUCT DESCRIPTION

Cooking surface layout

1 1

Cooking zone

Control panel

Control panel layout

1 2 43

9 8

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell

which functions operate.

Sen‐

sor

field

Function Comment

ON / OFF To activate and deactivate the hob.

Lock / The Child Safety

Device

To lock / unlock the control panel.

STOP+GO To activate and deactivate the function.

- To activate and deactivate the outer ring.

- Heat setting display To show the heat setting.

- Timer indicators of cooking

zones

To show for which zone you set the time.

Sen‐

sor

field

Function Comment

- Timer display To show the time in minutes.

- To select the cooking zone.

- To increase or decrease the time.

Automatic Heat Up To activate and deactivate the function.

- Control bar To set a heat setting.

Heat setting displays

Display Description

The cooking zone is deactivated.

The cooking zone operates.

STOP+GO function operates.

Automatic Heat Up function operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator): continue cooking /

keep warm / residual heat.

Lock / The Child Safety Device function operates.

Automatic Switch Off function operates.

OptiHeat Control (3 step

Residual heat indicator)

WARNING! / / There

is a risk of burns from residual

heat. The indicator shows the

level of the residual heat.

DAILY USE

WARNING! Refer to Safety

chapters.

Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 3

6 hours

4 - 7 5 hours

8 - 9 4 hours

10 - 14 1.5 hour

The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

Activating and deactivating the

outer rings

You can adjust the surface you cook to

the dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the

sensor field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at

the desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch a desired heat setting.

After 3 seconds

comes on.

To deactivate the function: change the

heat setting.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch again

and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of the

timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To change the time: set the cooking zone

with . Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch again

and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of the

timer. comes on. When the indicator of

the cooking zone starts to flash slowly the

time counts up. The display switches

between and counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with

The indicator of the cooking zone starts to

flash quickly. The display shows how long

the zone operates.

To deactivate the function: set the

cooking zone with and touch or .

The indicator of the cooking zone goes

out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate. The heat

setting display shows

To activate the function: touch

Touch or of the timer to set the time.

When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zones.

STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch .

comes on.

To deactivate the function: touch

The previous heat setting comes on.

Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the hob,

you also deactivate this

function.

The Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the hob

with

. Do not set the heat setting. Touch

for 4 seconds. comes on.

Deactivate the hob with

To deactivate the function: activate the

hob with . Do not set the heat setting.

Touch

for 4 seconds. comes on.

Deactivate the hob with .

To override the function for only one

cooking time: activate the hob with

comes on. Touch for 4 seconds. Set

the heat setting in 10 seconds. You can

operate the hob. When you deactivate the

hob with the function operates again.

OffSound Control (Deactivating

and activating the sounds)

Deactivate the hob. Touch for 3

seconds. The display comes on and goes

out. Touch for 3 seconds. or

comes on. Touch of the timer to

choose one of the following:

• - the sounds are off

• - the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control panel.

HINTS AND TIPS

WARNING! Refer to Safety

chapters.

Cookware

The bottom of the cookware

must be as thick and flat as

possible.

Cookware made of enamelled

steel and with aluminium or

copper bottoms can cause the

colour change on the glass-

ceramic surface.

Eco Timer

To save energy, the heater of the cooking

zone deactivates before the count down

timer sounds. The difference in the

operation time depends on the heat

setting level and the length of the cooking

operation.

Examples of cooking

applications

The data in the table is for

guidance only.

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as

nec‐

essary

Put a lid on the cookware.

1 - 3 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 3 Solidify: fluffy omelettes, baked

eggs.

10 -

Cook with a lid on.

3 - 5 Simmer rice and milkbased

dishes, heating up ready-

cooked meals.

25 -

Add the minimum twice as

much liquid as rice, mix milk

dishes part procedure

through.

5 - 7 Steam vegetables, fish, meat. 20 -

Add some tablespoons of liq‐

uid.

Heat setting Use to: Time

(min)

Hints

7 - 9 Steam potatoes. 20 -

Use max. ¼ l water for 750 g

of potatoes.

7 - 9 Cook larger quantities of food,

stews and soups.

60 -

150

Up to 3 l liquid plus ingredi‐

ents.

9 - 12 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

nec‐

essary

Turn halfway through.

12 - 13 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special cleaner applicable for the

surface of the hob.

• Use a special scraper for the glass.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar. If

not, the dirt can cause damage to the

hob. Take care to avoid burns. Put the

special scraper on the glass surface at

an acute angle and move the blade on

the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and

non-abrasive detergent. After cleaning,

wipe the hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Remedy

You cannot activate or oper‐

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec‐

tion diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse is blown

again and again, contact a

qualified electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more sen‐

sor fields at the same time.

Touch only one sensor field.

STOP+GO function oper‐

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

The zone is not hot be‐

cause it operated only for a

short time.

If the zone operated suffi‐

ciently long to be hot, speak

to an Authorised Service

Centre.

Automatic Heat Up function

does not operate.

The zone is hot. Let the zone become suffi‐

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the func‐

tion.

You cannot activate the out‐

er ring.

Activate the inner ring first.

There is a dark area

on the multiple zone.

It is normal that there is a

dark area on the multiple

zone.

Problem Possible cause Remedy

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

There is no signal when you

touch the panel sensor

fields.

The signals are deactivated. Activate the signals.

Refer to "Daily use" chapter.

comes on.

Automatic Switch Off oper‐

ates.

Deactivate the hob and acti‐

vate it again.

comes on.

The Child Safety Device or

the Lock function operates.

Refer to "Daily use" chapter.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

If comes on again, speak

to an Authorised Service

Centre.

E6 comes on. The second phase of the

power supply is missing.

Check if the hob is correctly

connected to the electrical

supply. Remove the fuse,

wait one minute, and insert

the fuse again.

If you cannot find a solution...

If you cannot find a solution to the problem

yourself, contact your dealer or an

Authorised Service Centre. Give the data

from the rating plate. Give also three digit

letter code for the glass ceramic (it is in

the corner of the glass surface) and an

error message that comes on. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

INSTALLATION

WARNING! Refer to Safety

chapters.

Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in units

and work surfaces that align to the

standards.

Connection cable

• The hob is supplied with a connection

cable.

• To replace the damaged mains cable,

use the cable type: H05V2V2-F which

withstands a temperature of 90°C or

higher. Speak to your local Service

Centre.

Assembly

min.

50mm

min.

500mm

R 5mm

min.

55mm

560

490

min.

28 mm

min.

12 mm

min.

20 mm

Protection box

If you use a protection box (an additional

accessory), the protective floor directly

below the hob is not necessary. The

protection box accessory may not be

available in some countries. Please

contact your local supplier.

You can not use the protection

box if you install the hob above

an oven.

TECHNICAL DATA

Rating plate

Model ETVH43S PNC 949 594 436 00

Typ 60 HAD 54 AO 220 - 240 V 50 - 60 Hz

Made in Germany

Ser.Nr. ................. 6.4 kW

Essentiel B

Cooking zones specification

Cooking zone

Nominal Power (Max heat set‐

ting) [W]

Cooking zone diameter [mm]

Left front 750 / 2200 120 / 210

Left rear 1200 145

Right front 1200 145

Right rear 1800 180

For optimal cooking results use cookware

not larger than the diameter of the cooking

zone.

ENERGY EFFICIENCY

Product information according to EU 66/2014

Model identification ETVH43S

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Radiant Heater

Diameter of circular cook‐

ing zones (Ø)

Left front

Left rear

Right front

Right rear

21.0 cm

14.5 cm

18.0 cm

Energy consumption per

cooking zone (EC electric

cooking)

Left front

Left rear

Right front

Right rear

195.7 Wh / kg

198.9 Wh / kg

195.7 Wh / kg

Energy consumption of the

hob (EC electric hob)

197.3 Wh / kg

EN 60350-2 - Household electric cooking

appliances - Part 2: Hobs - Methods for

measuring performance

Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• The cookware bottom should have the

same diameter as the cooking zone.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable containers

to recycle it. Help protect the environment

and human health and to recycle waste of

electrical and electronic appliances. Do

not dispose appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

TABLE DES MATIÈRES

Informations de sécurité 17

Consignes de sécurité 19

Description de l'appareil 21

Utilisation quotidienne 23

Conseils 26

Entretien et nettoyage 27

En cas d'anomalie de fonctionnement 28

Installation 30

Caractéristiques techniques 32

Rendement énergétique 33

Sous réserve de modifications.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et dégâts

résultant d'une mauvaise installation ou utilisation.

Conservez toujours les instructions dans un lieu sûr et

accessible pour vous y référer ultérieurement.

Sécurité des enfants et des personnes vulnérables

• Cet appareil peut être utilisé par des enfants âgés d'au

moins 8 ans et par des personnes ayant des capacités

physiques, sensorielles ou mentales réduites ou dénuées

d’expérience ou de connaissance, s'ils (si elles) sont

correctement surveillé(e)s ou si des instructions relatives à

l'utilisation de l'appareil en toute sécurité leur ont été

données et si les risques encourus ont été appréhendés.

• Ne laissez pas les enfants jouer avec l'appareil.

• Ne laissez pas les emballages à la portée des enfants et

jetez-les convenablement.

• Tenez les enfants et les animaux éloignés de l'appareil

lorsqu'il est en cours de fonctionnement ou lorsqu'il

refroidit. Les parties accessibles sont chaudes.

• Si l'appareil est équipé d'un dispositif de sécurité enfants,

nous vous recommandons de l'activer.

• Le nettoyage et l'entretien par l'usager ne doivent pas être

effectués par des enfants sans surveillance.

• Les enfants de moins de 3 ans doivent être tenus éloignés

de l'appareil en permanence lorsqu'il est en

fonctionnement.

Sécurité générale

• AVERTISSEMENT: L'appareil et ses parties accessibles

deviennent chauds pendant son fonctionnement. Veillez à

ne pas toucher les éléments chauffants. Les enfants de

moins de 8 ans doivent être tenus à l'écart, à moins d'être

surveillés en permanence.

• Ne faites pas fonctionner l'appareil avec un minuteur

externe ou un système de commande à distance.

• AVERTISSEMENT : Il peut être dangereux de laisser

chauffer de la graisse ou de l'huile sans surveillance sur

une table de cuisson car cela pourrait provoquer un

incendie.

• N'essayez JAMAIS d'éteindre un feu avec de l'eau.

Éteignez l'appareil puis couvrez les flammes, par exemple

avec un couvercle ou une couverture ignifuge.

• ATTENTION : Toute cuisson doit être surveillée. Une

cuisson courte doit être surveillée en permanence.

• AVERTISSEMENT : Risque d'incendie ! N'entreposez rien

sur les surfaces de cuisson.

• Ne posez pas d'objets métalliques tels que couteaux,

fourchettes, cuillères ou couvercles sur la table de cuisson

car ils pourraient chauffer.

• N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil.

• Si la surface vitrocéramique / en verre est fissurée,

éteignez l'appareil pour éviter tout risque d'électrocution.

• Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, un service de maintenance

agréé ou un technicien qualifié afin d'éviter tout danger.

• AVERTISSEMENT : Utilisez uniquement les dispositifs de

protection pour table de cuisson conçus ou indiqués

comme adaptés par le fabricant de l'appareil de cuisson

dans les instructions d'utilisation, ou les dispositifs de

protection pour table de cuisson intégrés à l'appareil.

L'utilisation de dispositifs de protection non adaptés peut

entraîner des accidents.

CONSIGNES DE SÉCURITÉ

Installation

AVERTISSEMENT! L'appareil

doit être installé uniquement

par un professionnel qualifié.

AVERTISSEMENT! Risque de

blessure corporelle ou de

dommages matériels.

• Retirez l'intégralité de l'emballage.

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les

instructions d'installation fournies avec

l'appareil.

• Respectez l'espacement minimal requis

par rapport aux autres appareils et

éléments.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd.

Utilisez toujours des gants de sécurité

et des chaussures fermées.

• Isolez les surfaces découpées à l'aide

d'un matériau d'étanchéité pour éviter

que la moisissure ne provoque de

gonflements.

• Protégez la partie inférieure de

l'appareil de la vapeur et de l'humidité.

• N'installez pas l'appareil près d'une

porte ou sous une fenêtre. Les

récipients chauds risqueraient de

tomber de l'appareil lors de l'ouverture

de celles-ci.

• Si l'appareil est installé au-dessus de

tiroirs, assurez-vous qu'il y a

suffisamment d'espace entre le fond de

l'appareil et le tiroir supérieur pour que

l'air puisse circuler.

• Le dessous de l'appareil peut devenir

très chaud. Veillez à installer un

panneau de séparation sous l'appareil

pour en bloquer l'accès. Ce panneau

peut être en contreplaqué, provenir

d'un autre meuble de cuisine, et doit

être composé d'un matériau non

inflammable.

Branchement électrique

AVERTISSEMENT! Risque

d'incendie ou d'électrocution.

• L'ensemble des branchements

électriques doit être effectué par un

technicien qualifié.

• L'appareil doit être relié à la terre.

• Avant toute intervention, assurez-vous

que l'appareil est débranché.

• Vérifiez que les paramètres figurant sur

la plaque signalétique correspondent

aux données électriques de votre

réseau.

• Assurez-vous que l'appareil est bien

installé. Un câble d'alimentation lâche

et inapproprié ou une fiche (si

présente) non serrée peuvent être à

l'origine d'une surchauffe des bornes.

• Utilisez le câble d'alimentation

électrique approprié.

• Ne laissez pas le câble d'alimentation

s'emmêler.

• Assurez-vous qu'une protection anti-

électrocution est installée.

• Utilisez un collier anti-traction sur le

câble.

• Assurez-vous que le câble

d'alimentation ou la fiche (si présente)

n'entrent pas en contact avec les

surfaces brûlantes de l'appareil ou les

récipients brûlants lorsque vous

branchez l'appareil à des prises

électriques situées à proximité.

• N'utilisez pas d'adaptateurs multiprises

ni de rallonges.

• Veillez à ne pas endommager la fiche

secteur (si présente) ni le câble

d'alimentation. Contactez notre centre

de maintenance agréé ou un électricien

pour remplacer le câble d'alimentation

s'il est endommagé.

• La protection contre les chocs des

parties sous tension et isolées doit être

fixée de telle manière qu'elle ne peut

pas être enlevée sans outils.

• Ne branchez la fiche d'alimentation à la

prise de courant qu'à la fin de

l'installation. Assurez-vous que la prise

de courant est accessible une fois

l'appareil installé.

• Si la prise de courant est lâche, ne

branchez pas la fiche d'alimentation

secteur.

• Ne tirez jamais sur le câble

d'alimentation pour débrancher

l'appareil. Tirez toujours sur la fiche.

• N'utilisez que des systèmes d'isolation

appropriés : des coupe-circuits, des

fusibles (les fusibles à visser doivent

être retirés du support), un disjoncteur

différentiel et des contacteurs.

• L'installation électrique doit être

équipée d'un dispositif d'isolement à

coupure omnipolaire. Le dispositif

d'isolement doit présenter une distance

d'ouverture des contacts d'au moins

3 mm.

Utilisation

AVERTISSEMENT! Risque de

blessures, de brûlures ou

d'électrocution.

• Avant la première utilisation, retirez les

emballages, les étiquettes et les films

de protection (si présents).

• Utilisez cet appareil dans un

environnement domestique.

• Ne modifiez pas les caractéristiques de

cet appareil.

• Assurez-vous que les orifices de

ventilation ne sont pas bouchés.

• Ne laissez jamais l'appareil sans

surveillance pendant son

fonctionnement.

• Éteignez les zones de cuisson après

chaque utilisation.

• Ne posez pas de couverts ou de

couvercles sur les zones de cuisson.

Elles sont chaudes.

• N'utilisez jamais cet appareil avec les

mains mouillées ou lorsqu'il est en

contact avec de l'eau.

• N'utilisez jamais l'appareil comme plan

de travail ou comme plan de stockage.

• Si la surface de l'appareil présente des

fêlures, débranchez immédiatement

l'appareil pour éviter tout risque

d'électrocution.

• Lorsque vous versez un aliment dans

de l'huile chaude, elle peut

éclabousser.

AVERTISSEMENT! Risque

d'incendie et d'explosion.

• Les graisses et l'huile chaudes peuvent

dégager des vapeurs inflammables.

Tenez les flammes ou les objets

chauds éloignés des graisses et de

l'huile lorsque vous vous en servez

pour cuisiner.

• Les vapeurs dégagées par l'huile très

chaude peuvent provoquer une

combustion spontanée.

• L'huile qui a servi contient des restes

d'aliments pouvant provoquer un

incendie à température plus faible que

l'huile n'ayant jamais servi.

• Ne placez pas de produits

inflammables ou d'éléments imbibés de

produits inflammables à l'intérieur ou à

proximité de l'appareil, ni sur celui-ci.

AVERTISSEMENT! Risque

d'endommagement de

l'appareil.

• Ne laissez pas de récipients chauds

sur le bandeau de commande.

• Ne posez pas de couvercle de

casserole chaud sur la surface en verre

de la table de cuisson.

• Ne laissez pas le contenu des

récipients de cuisson s'évaporer

complètement.

• Prenez soin de ne pas laisser tomber

d'objets ou de récipients sur l'appareil.

Sa surface risque d'être endommagée.

• Ne faites jamais fonctionner les zones

de cuisson avec des récipients de

cuisson vides ou sans aucun récipient

de cuisson.

• Ne placez jamais de papier aluminium

sur l'appareil.

• N'utilisez pas de récipients en fonte ou

en aluminium, ni de récipients dont le

fond est endommagé et rugueux. Ils

risqueraient de rayer le verre ou la

surface vitrocéramique. Soulevez

toujours ces objets lorsque vous devez

les déplacer sur la surface de cuisson.

La page charge ...

ESSENTIELB ETVH 43s Le manuel du propriétaire

Marque: ESSENTIELB

Modèle: ETVH 43s

Catégorie: Plaques de cuisson

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: ESSENTIELB ETVH 43s Owner's manual

Documents connexes

Essentiel b ETVI4B3 Le manuel du propriétaire

ESSENTIELB ETVH 43s Le manuel du propriétaire

ESSENTIELB ETVH 43s Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents