Insignia NS-PCA3D Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

If the driver doesn’t automatically install, see
“Manually installing the Windows driver or “Manually
installing the Mac OS driver” below.
Manually installing the Windows driver:
1 Go to www.insigniaproducts.com.
2 Search for NS-PCA3D, then select the Support &
Download tab.
3 Under the Drivers, Firmware & Software click Files to
download the driver.
4 Open the downloaded .zip folder, then follow the
on-screen instructions to install the driver.
Manually installing the Mac OS driver
Unplug the adapter from your Mac before installing
the driver manually.
1 Go to www.insigniaproducts.com.
2 Search for NS-PCA3D, then select the Support &
Download tab.
3 Under the Drivers, Firmware & Software click Files to
download the driver.
4 Open the .dmg le to load drivers to your
Mac.
5 Click the .pkg le to install the USB Video Display
driver.
6 Follow the instructions to install the device driver.
Note: A screen requesting permission to install the driver
might come up. If so, click OK, then go to System
Preferences > Security & Privacy to allow App Store and
identied developers, then click Open to allow the install.
7 When installation is complete, restart your
computer to congure the update.
8 Connect the adapter to your Mac.
V1 ENGLISH 20-0247
PACKAGE CONTENTS
USB 3.0 to DisplayPort Adapter
Quick Setup Guide
FEATURES
A simple way to connect to a monitor with a
DisplayPort connection
Supports resolutions up to 3840 × 2160 at 30 Hz
with a USB 3.0 connection for high-quality video
(max resolution of 2048 x 1152 at 60 Hz with USB
2.0)
Sends audio from your computer to your display
Mirrors or extends your screen to a second monitor
for better presentations and multitasking
SYSTEM REQUIREMENTS
Computer with an available USB 3.0 port
Monitor with an available DisplayPort
• Windows 10
macOS 10.12 or newer
CPU: Intel Core i3 Dual Core 2.8 GHz; RAM: 2 GB or
higher
TROUBLESHOOTING
My computer does not detect the adapter
Make sure that all of the cables are connected
securely and correctly.
Make sure that the cables are not damaged.
Try connecting to another USB port.
Make sure that the driver is installed (if required).
The driver did not install on my system
Make sure that the adapter and network cable are
not damaged.
To check the device installation, go to
Windows: Control Panel>Device
Manager>Display Adapters. Look for a string like
Insignia USB3.0 Display Adapter.
Mac: Click the Apple icon ( ), then click About This
Mac>System Report>Hardware - USB. Look for a
string like Insignia USB3.0 Display Adapter
Station.
Temporarily shut down your rewall and antivirus
software in case they are preventing the installation
of the driver.
Make sure that your system is compatible with the
driver.
See System Requirements for more information.
My monitor won't extend or mirror my computer's
display.
Change the display settings on your computer.
LEGAL NOTICES
FCC Information
This device complies with Part 15B of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numerique de la classe Best conforme a la norme NMB-003 du
Canada.
INSTALLING THE DRIVER
Automatically install for Windows 10
1 Make sure that your computer is connected to the
internet.
2 Connect the DisplayPort device to the adapter. Turn
on the DisplayPort device.
3 Plug the adapter into a USB 3.0 port on your
computer. The driver installs automatically.
QUICK SETUP GUIDE
USB 3.0 to
DisplayPort
Adapter
NS-PCA3D / NS-PCA3D-C
Before using your new product, please read these instructions to prevent any damage.
Final at size: 25.2 × 4.72 in. (640 × 120 mm)
Final fold size: 3.15 × 4.72 in. (80 × 120 mm)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289
(U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated
companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
( ),
Monitor
DisplayPort cable
(not included)
DisplayPort
USB 3.0 port
Computer
NS-PCA3D_-C_20-0247_QSG_V1_EN_FR.ai 1 6/23/2020 11:27:44 AMNS-PCA3D_-C_20-0247_QSG_V1_EN_FR.ai 1 6/23/2020 11:27:44 AM
Si le pilote ne s'installe pas automatiquement, voir la
section « Installation manuelle du pilote Windows »
ou « Installation manuelle du pilote Mac OS » ci-après.
Installation manuelle du pilote Windows :
1 Aller sur le site www.insigniaproducts.com.
2 Chercher NS-PCA3D, puis sélectionner l'onglet
Support & Downloads (Assistance technique et
téléchargements).
3 Sous la rubrique Pilotes, microprogrammes et
logiciels, cliquer sur Fichiers pour télécharger le
pilote.
4 Ouvrir le dossier *.zip téléchargé, puis suivre les
instructions à l'écran pour installer le pilote.
Installation manuelle du pilote Mac OS
Débrancher l’adaptateur du Mac avant d'installer le
pilote manuellement.
1 Aller sur le site www.insigniaproducts.com.
2 Chercher NS-PCA3D, puis sélectionner l'onglet
Support & Download(Assistance technique et
téléchargements).
3 Sous la rubrique Pilotes, microprogrammes
et logiciels, cliquer sur Fichiers pour
télécharger le pilote.
4 Ouvrir le chier *.dmg pour installer les pilotes sur le
Mac.
5 Cliquer sur le chier *.pkg pour installer le pilote
d'achage vidéo USB.
6 Suivre les instructions pour installer le pilote du
périphérique.
Remarque : Un écran demandant la permission d'installer
le pilote peut s'acher. Si c'est le cas, cliquer sur OK, puis
aller dans les System Preferences > Security & Privacy
(Préférences Système > Sécurité et Condentialité) pour
autoriser l'App Store et les développeurs identiés, puis
cliquer sur Open (Ouvrir) pour autoriser l'installation.
7 Lorsque l'installation est terminée, redémarrer
l’ordinateur pour congurer la mise à jour.
8 Brancher l’adaptateur sur le Mac.
V1 FRANÇAIS 20-0247
CONTENU DE L'EMBALLAGE
Adaptateur USB 3.0 à DisplayPort
Quick Setup Guide
CARACTÉRISTIQUES
Un moyen pratique de se connecter à un moniteur
avec une connexion DisplayPort
Prend en charge des résolutions jusqu'à 3840 ×
2160 à 30 Hz avec une connexion USB 3.0 pour une
vidéo de haute qualité (résolution maximale de
2048 x 1152 à 60 Hz avec USB 2.0).
Transmet l'audio de l'ordinateur à l'écran
Reète ou étend l'écran à un deuxième moniteur
pour une meilleure présentation et des opérations
multitâches
CONFIGURATION SYSTÈME REQUISE
Un ordinateur avec un port USB 3.0 disponible
Moniteur avec un DisplayPort disponible
• Windows 10
macOS 10.12 ou supérieur
UC (unité centrale) : Intel Core i3 double cœur de 2,8
GHz; RAM : 2 Go ou plus
PROBLÈMES ET SOLUTIONS
L'ordinateur ne détecte pas l'adaptateur
Vérier que tous les câbles sont connectés de façon
sécuritaire et correctement.
Vérier que les câbles ne sont pas endommagés.
Essayer une connexion à un autre port USB.
Vérier que le pilote est installé (si besoin est).
Le pilote n'est pas installé sur le système
Vérier que l'adaptateur et le câble réseau ne sont pas
endommagés.
Pour vérier l'installation du périphérique, aller dans
Windows : Control Panel>Device Manager>Display
Adapters (Panneau de contrôle>Gestionnaire de
périphériques>Adaptateurs d'achage). Chercher
la chaîne de caractères « Insignia USB3.0 Display
Adapter » (Adaptateur d'achage USB 3.0
d'Insignia).
Mac : Cliquer sur l'icône Apple , puis sur About This
Mac>System Report>Hardware - USB (À propos du
Mac>Rapport système>Matériel - USB). Chercher la
chaîne de caractères « Insignia USB3.0 Display
Adapter Station » (Station de l'adaptateur d'achage
USB 3.0 d'Insignia).
Désactiver temporairement le pare-feu et l'anti-virus,
dans le cas où ils empêchent l'installation du pilote.
Vérier que le système est compatible avec le pilote.
Voir Conguration système requise pour plus
d'information.
Mon moniteur ne s'étend pas et ne duplique pas
l'écran de mon ordinateur.
Modier les paramètres de l'écran sur l'ordinateur.
AVIS JURIDIQUES
Information FCC
Cet appareil est conforme à l’article 15 du règlement de la FCC. Son
fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil
ne doit pas provoquer d’interférences préjudiciables, et (2) il doit accepter
toute interférence reçue, y compris celles risquant d’engendrer un
fonctionnement indésirable.
Cet équipement a été testé et déclaré conforme aux limitations prévues
dans le cadre de la catégorie B des appareils numériques, dénies par
l’article 15 du règlement de la FCC. Ces limites ont été établies pour fournir
une protection raisonnable contre les interférences préjudiciables lors
d’une installation résidentielle. Cet équipement génère, utilise et diuse
des ondes radio et, s’il n’est pas installé et utilisé conformément aux
instructions dont il fait l’objet, il peut provoquer des interférences
préjudiciables aux communications radio. Cependant, il n'est pas possible
de garantir qu’aucune interférence ne se produira pour une installation
particulière. Si cet équipement produit des interférences préjudiciables lors
de réceptions radio ou télévisées, qui peuvent être détectées en éteignant
puis en rallumant l’appareil, essayer de corriger l’interférence au moyen de
l’une ou de plusieurs des mesures suivantes :
réorienter ou déplacer l’antenne réceptrice;
augmenter la distance entre l’équipement et le récepteur;
brancher l’équipement sur la prise électrique d’un circuit diérent de
celui auquel le récepteur est relié;
INSTALLATION DU PILOTE
Installation automatique du pilote pour Windows 10
1 Vérier que l'ordinateur est bien connecté à l'Internet.
2 Connecter le périphérique DisplayPort à l'adaptateur.
Mettre en marche le périphérique DisplayPort.
3 Connecter l’adaptateur à un port USB 3.0 de
l’ordinateur. Le pilote est installé automatiquement.
GUIDE D’INSTALLATION RAPIDE
Adaptateur USB
3.0 à DisplayPort
NS-PCA3D / NS-PCA3D-C
Avant l’utilisation de ce produit neuf, lire ces instructions an d'éviter tout dommage.
contacter le revendeur ou un technicien radio ou télévision qualié
pour toute assistance.
Tous changements ou modications qui ne seraient pas expressément
approuvés par les responsables des normes pourraient rendre nul le droit
de l’utilisateur d’utiliser cet équipement.
NMB-003
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
GARANTIE LIMITÉE D’UN AN
Aller sur le site www.insigniaproducts.com pour plus
de détails.
POUR CONTACTER INSIGNIA :
Pour le service à la clientèle, appeler le 877-467-4289
(États-Unis et Canada) ou le 01-800-926-3000 (au
Mexique)
www.insigniaproducts.com
INSIGNIA est une marque de commerce de Best Buy et de ses
sociétés aliées.
Distribuée par Best Buy Purchasing, LLC
7601 Penn Ave. South, Richeld, MN 55423 É.-U.
© 2020 Best Buy. Tous droits réservés.
e
,
Moniteur
Câble DisplayPort
(non inclus)
DisplayPort
Port USB 3.0
Ordinateur
NS-PCA3D_-C_20-0247_QSG_V1_EN_FR.ai 2 6/23/2020 11:27:44 AMNS-PCA3D_-C_20-0247_QSG_V1_EN_FR.ai 2 6/23/2020 11:27:44 AM
  • Page 1 1
  • Page 2 2

Insignia NS-PCA3D Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues