Thermador HMIB42WS Mode d'emploi

Marque: Thermador

Modèle: HMIB42WS

Taper: Mode d'emploi

THERMADOR.COM

Use and Care

GUIDE

Thermador Masterpiece® Island Hood

THERMADOR.COM

Models |

Modèles |

Modelos:

HMIB36WS

HMIB42WS

Use and Care

GUIDE

Thermador Masterpiece® Wall Hoods

Table of Contents (English) ................................................................... 3

Table de Matières (Français) ................................................................. 20

Índice de Materias (Español).................................................................. 36

Home Connect User’s Information

Wi-Fi® Module

FCC/IC

Statements

CMIIT ID: 2017AJ4134 (M)

FCC: 2AHES-COM2

IC: 21152-COM2

The Home Connect module is a communication

device designed to provide communication between

appliances and smart devices.

This module is integrated at the factory, under direct control of BSH Home

Appliances Corporation, and is not user serviceable or upgradable.

At least 20 cm separation distance should be maintained from device to user.

FCC COMPLIANCE STATEMENT

CAUTION: Changes or modiﬁcations not expressly approved could void your authority to use

this equipment.

This device complies with Part 15 of the FCC Rules. Operation to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause undesired operation.

INDUSTRY CANADA STATEMENT

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil

ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Page. 3

Congratulations!

Congratulations on your recent

Thermador purchase! Whether you are a

dedicated chef or simply a connoisseur of

the art of cooking, owning a Thermador

kitchen is the ultimate expression of

personal style, good taste and an

appreciation for the complete culinary

experience. Our award-winning products

have been empowering culinary

enthusiasts for more than eleven

decades.

Before you begin using your new

Thermador product, please take a

moment to review the Use and Care

Guide. You will ﬁnd the answers to all of

your questions as well as some very

important safety information. Pay special

attention to the Important Safety

Instructions located at the beginning of

the manual. Your Thermador product is

ready and waiting to be used for your

next gourmet creation!

Our products are handcrafted with the

highest quality authentic materials to

ensure years of reliable service. In the

unlikely event that you have a service

question, please have your model and

serial numbers of your product available

(see the “Before Calling For Service”

section for location).

We realize that you have made a

considerable investment in your kitchen.

Please feel free to share your Thermador

kitchen photos and remodeling stories

with us. Follow us on Twitter or post your

kitchen photos on Facebook. We would

love to hear from you!

Thermador wishes you many years of

creative cooking.

Félicitations! ¡Felicidades!

Félicitations pour votre achat d’un

produit Thermador! Que vous soyez un

chef à temps plein ou simplement un

amateur d’art culinaire, être propriétaire

d’une cuisine Thermador est l’expression

ultime de style et de bon goût personnel

ou une appréciation d’une expérience

culinaire complète. Depuis plus de onze

décennies, nos produits primés font le

bonheur des passionnés des arts

culinaires.

Avant d’utiliser votre nouveau produit

Thermador, veuillez prendre quelques

instants pour lire le Guide d’utilisation et

d’entretien. Vous y trouverez les

réponses à toutes vos questions même

que quelques renseignements très

importants de sécurité. Veiller à être très

attentif aux Consignes de sécurité

importantes imprimées au début du

manuel. Votre produit Thermador est

prêt et n’attend que vous pour créer le

prochain plat gourmet!

Nos produits sont issus du travail

d’artisans qui utilisent des matériaux

authentiques d’excellente qualité pour

vous assurer des années de service

ﬁable. Dans le cas peu probable que

vous ayez une demande de réparation,

veuillez avoir en main les numéros de

modèle et de série du produit (consultez

la section “Avant d’appeler pour une

réparation” pour trouver l’emplacement

de ces numéros).

Nous réalisons que vous avez effectué

un investissement considérable dans

votre cuisine. N’hésitez pas à partager

les photos de votre cuisine Thermador et

de vos récits de rénovation avec nous.

Suivez-nous sur Twitter ou publiez vos

photos de cuisine sur Facebook. Nous

aimerions avoir vos opinions!

Thermador vous souhaite plusieurs

années de cuisine créative.

¡Felicidades por la reciente compra de

su Thermador! Tanto si usted es un gran

jefe de cocina o un simple aﬁcionado del

arte culinario, el hecho de poseer una

cocina Thermador es la última expresión

de su estilo personal, de su buen gusto y

de su apreciación de una experiencia

culinaria completa. Desde hace más de

once décadas, nuestros premiados

productos han estado empoderando a

los entusiastas culinarios.

Antes de empezar a usar su nuevo

producto Thermador, tómese un

momento para leer la Guía de uso y

cuidado. Encontrará respuesta a todas

las preguntas que se plantee, así como

información muy importante sobre

seguridad. Preste especial atención a las

Instrucciones de seguridad importantes

situadas al inicio del manual. ¡Su

producto Thermador está listo y aguarda

que usted lo use en su próxima creación

gastronómica!

Nuestros productos se fabrican a mano

con materiales auténticos de alta calidad

para garantizar años de servicio

conﬁable. En el caso improbable de que

tenga una pregunta dirigida al servicio

técnico, tenga a mano el número de

modelo y el número de serie de su

producto (consulte la sección “Antes de

llamar al servicio técnico” para saber

dónde se encuentran).

Somos conscientes de que ha realizado

una gran inversión económica en su

cocina. No dude en compartir con

nosotros fotos e historias de la

remodelación de su cocina Thermador.

Síganos en Twitter o publique las fotos

de su cocina en Facebook. ¡Estaremos

encantados de tener noticias suyas!

Thermador le desea muchos años de

cocina creativa!

Use and Care Guide English | 5 |

Table of

Contents

Safety ........................................................................... 3

Important Safety Instructions ................................. 3

Advance Planning .......................................................... 5

Before You Begin .................................................... 5

General Information ................................................. 6

Installation ..................................................................... 7

Installation Considerations ...................................... 7

Ductwork Preparation .............................................. 8

Hood Transition ...................................................... 11

Electrical Requirements .......................................... 11

Choosing the Correct Blower ................................. 11

Preparing the Ceiling Cutout and Housing............. 12

Custom Insert Installation with Hood Trims ............ 13

Blower Motor Installation ....................................... 14

Remote Installation (optional) ................................ 16

Installing Filters and Grease Trays............................ 18

Installer Checklist and Service ........................................ 19

Installer Checklist ..................................................... 19

Before Calling Service ............................................. 19

Product Data Rating Plate ....................................... 19

Service, Parts & Accessories ................................ back page

Safety

Definitions

WARNING

This indicates that death or serious injuries may occur as a

result of non-observance of this warning.

CAUTION

This indicates that minor or moderate injuries may occur

as a result of non-observance of this warning.

NOTICE: This indicates that damage to the appliance or

property may occur as a result of non-compliance with this

advisory.

Note: This alerts you to important information and/or tips.

This THERMADOR® appliance is made by

BSH Home Appliances Corporation

1901 Main Street, Suite 600

Irvine, CA 92614

Questions?

1-800-735-4328

www.thermador.com

We look forward to hearing from you!

English | 6 |

Safety

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

INSTALLER: Save these instructions for the local electrical

inspector’s use. Please leave these instructions with this

unit for the owner. Show the owner the location of the

circuit breaker or fuse. Mark it for easy reference.

OWNER: Please retain these instructions for future

reference.

WARNING

If the information in this manual is not followed exactly,

re or shock may result causing property damage or

personal injury.

WARNING

If the information in this manual is not followed

exactly, re or shock may result causing proper-

ty damage, personal injury or death.

- DO NOT store or use gasoline or other ammable

vapors and liquids in the vicinity of this or any other

apppliance.

- WHAT TO DO IF YOU SMELL GAS

•DO NOT try to light any appliance.

•DO NOT touch any electrical switch.

•DO NOT use any phone in your building.

•Immediately call your gas supplier from a

neighbor’s phone. Follow the gas supplier’s

instructions.

•If you cannot reach your gas supplier, call the re

department.

- Installation and service must be performed by an

authorized servicer, service agency or the gas supplier.

WARNING

Turn off power circuit at service panel and lock out panel

before wiring this appliance. Requirement: 120 VAC, 60

Hz 15 A. Allow the appliance to cool after the power has

been turned off before servicing the appliance.

WARNING

Automatically Operated Device

To reduce the risk of injury disconnect from power supply

before servicing.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

•Use this unit only in the manner intended by the

manufacturer. If you have questions, contact the

manufacturer at the address or telephone number

listed on the back page.

•Before servicing or cleaning unit, switch power off at

service panel and lock the service disconnecting

means to prevent power from being switched on

accidentally. When the service disconnecting means

cannot be locked, securely fasten a prominent

warning device, such as a tag, to the service panel.

WARNING

DO NOT repair or replace any part of the appliance

unless specically recommended in the manuals.

Improper installation, service or maintenance can cause

injury or property damage. Refer to this manual for

guidance. All other servicing should be done by an

authorized servicer.

WARNING

ELECTRICAL SHOCK HAZARD

•DO NOT remove connections.

•DO NOT use an extension cord.

•Failure to follow these instructions can

result in death, re, or electrical shock.

Use and Care Guide English | 7 |

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Grounding Instructions

WARNING

Improper grounding can result in a risk of electric shock.

This appliance must be grounded. In the event of an electri-

cal short circuit, grounding reduces the risk of electric shock

by providing an escape wire for the electric current.

Be sure your appliance is properly installed and grounded

by a qualied technician. Installation, electrical connections

and grounding must comply with all applicable codes.

If required by the National Electrical Code (or Canadian

Electrical Code), this appliance must be installed on a sepa-

rate branch circuit.

WARNING

To reduce the risk of re or electrical shock, DO NOT use

this appliance with any solid state speed device.

Safety Codes and Standards

This appliance complies with one or more of the following

Standards:

•UL 507, The Standard for the Safety of Electric Fans

•CSA C22.2 No. 113, Fans and Ventilators

It is the responsibility of the owner and the installer to de-

termine if additional requirements and/or standards apply

to specic installations.

CAUTION

Unit is heavy and requires at least two people

or proper equipment to move and install.

Hidden surfaces may have sharp edges. Use

caution when handling the appliance. Failure

to do so may result in property damage or

personal injury.

Never modify or alter the construction of the appliance.

For example, do not remove panels, wire covers or

brackets/screws.

CAUTION

For general ventilating use only. DO NOT use to exhaust

hazardous or explosive materials and vapors.

WARNING

To reduce the risk of re, use only metal ductwork.

Use a qualied installer.

Remove all tape and packaging before using the

appliance. Destroy the packaging after install. Never allow

children to play with packaging material.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,

OR INJURY TO PERSONS, OBSERVE THE

FOLLOWING:

•Installation work and electrical wiring must be done

by qualied person(s) in accordance with all

applicable codes and standards, including re-related

construction.

•Sufcient air is needed for proper combustion and

exhausting of gases through the ue (chimney) of

fuel burning equipment to prevent back drafting.

Follow the heating equipment manufacturer’s

guideline and safety standards such as those

published by the National Fire Protection

Association (NFPA), and the American Society for

Heating, Refrigeration and Air Conditioning

Engineers (ASHRAE), and the local code authorities.

•When cutting or drilling into wall or ceiling, do not

damage electrical wiring and other hidden utilities.

•Ducted fans must always be vented to the outdoors.

English | 8 |

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF A RANGE TOP GREASE

FIRE:

•Never leave surface units unattended at high

settings.

Boilovers cause smoking and greasy spillovers that

may ignite. Heat oils slowly on low or medium

settings.

•Always turn hood ON when cooking at high heat

or when cooking ambéing food (i.e. Crepes Suzette,

Cherries Jubilee, Peppercorn Beef Flambe).

•Clean ventilating fans frequently. Grease should

not be allowed to accumulate on fan or lter.

•Use proper pan size. Always use cookware

appropriate for the size of the surface element.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN

THE EVENT OF A RANGE TOP GREASE FIRE,

OBSERVE THE FOLLOWING:a

• SMOTHER FLAMES with a close tting lid, cookie

sheet, or metal tray, then turn off the burner. BE

CAREFUL TO PREVENT BURNS. If the ames do not

go out immediately, EVACUATE AND CALL THE

FIRE DEPARTMENT.

•NEVER PICK UP A FLAMING PAN - you may get

burned.

•DO NOT USE WATER, including wet dishcloths or

towels - a violent steam explosion will result.

•Use an extinguisher ONLY if:

a) You know you have a class ABC extinguisher,

and you already know how to operate it.

b) The re is small and contained in the area where

it started.

c) The re department is being called.

d) You can ght the re with your back to an exit.

aBased on “Kitchen Fire Safety Tips” published by NFPA.

Proposition 65Warning:

This product may contain a chemical known to the State of

California, which can cause cancer or reproductive harm.

Therefore, the packaging of your product may bear the

following label as required by California:

STATE OF CALIFORNIA PROPOSITION 65 WARNING:



WARNING

&DQFHUDQG5HSURGXFWLYH+DUPwww.P65Warnings.ca.gov

Use and Care Guide English | 9 |

Introduction

Before You Begin

Before using your appliance, be sure to read this manual.

Pay special attention to the Important Safety Instructions

located at the beginning of the manual.

WARNING

To avoid risk of burn, turn the hood ON when cooking at

high heat or when ambéing food.

DO NOT use all heating elements or gas burners simulta-

neously at high settings for a prolonged period. (max.15

minutes).

If the hood is located over a gas cooktop, operate the

hood at maximum setting whenever three or more gas

burners are being used.

DO NOT operate the ventilation system during a cooktop

re.

All Hood models are rated for 120 VAC, using a 15 amp

circuit breaker; see the Installation Manual for more details.

Operating the Appliance

Overview

NOTE: The Use and Care Guide applies to several versions

of this appliance. Accordingly, you may nd descriptions

of individual features that do not apply to your specic

appliance.

IMPORTANT: DO NOT use cooktop, rangetop, or range

while hood is disassembled.

Island Hood

HMIB36WS and HMIB42WS

27’’ (686 mm) in depth, with widths of 36’’ (914 mm) and

42’’ (1067 mm).

This model series features brushed stainless-steel canopy

with LED lights.

(1) Hood canopy

(2) Touch control

(3) LED lights

(4) Perimetral plate

(5) Filter latch

(6) Hybrid mesh lters

(7) Flue duct

Use and Care GuideEnglish | 10 |

Touch Control Panel

NOTE: Not all features referred to in this manual applies to

all models.

FILTER AUTO LIGHTS CONNECTDELAY 01234

43 5 6 721

(1) FILTER Clean Filter Reminder

After 40 hours of operation, the FILTER button will illuminate indicating that the filters need to be

cleaned. When this indicator illuminates clean the filters as instructed on page 15. After cleaning,

press and hold the FILTER button for 3 seconds until it beeps to reset the 40-hour period and to

turn the reminder off.

Receive clean filter reminder notification through the Home Connect™ app when activated in Set-

tings section, as well as see filter saturation status.

(2) DELAY Delay Shut Off

If the blower is off when the DELAY button is pressed, the blower will turn on to the high speed

setting for 10 minutes. Once time has elapsed, the blower will automatically turn off. If the blower

is on when the DELAY button is pressed, the blower runs for 10 minutes from the time the DELAY

button was pressed at the current speed then turns off. During the 10 minute timed period, the

DELAY button is illuminated. To interrupt a timed period, press one of the fan speed buttons or 0

button to turn off.

Ability to choose a different time period and speed than the default setting is possible through the

Home ConnectTM app in the settings menu.

(3) 0 OFF

Touch ‘0’ once to turn the blower off and reset the control.

(4) 1 – 4 Fan Speed

Increases or decreases the blower speeds. The chosen blower speed LED will remain illuminated

while in operation.

1 – Low

2 – Medium

3 – Medium/High

4 – High

(5) AUTO Automatic Mode

When in AUTO mode, the hood automatically turns the blower on, depending on the amount of

heat the control senses. It automatically adjusts every 5 minutes. If the control does not sense a

high level of heat, it will turn the blower off.

Remotely control and monitor hood fan speeds through Home Connect™ app.

(6) LIGHTS LED Light Control

This button controls the LED lighting. The first press turns the lights on. A second press dims the

lights. A third press turns the lights off. 0-100% light slider in Home ConnectTM app allows additio-

nal control to obtain the perfect level of light.

(7) CONNECT Home ConnectTM

This function allows the user to connect the hood with a mobile device. See “Home ConnectTM” on

page 11.

Control tone

To turn OFF/ON the control tone, hold the FILTER and LIGHTS button for 3 seconds.

Control tone can also be turned OFF/ON through the settings section of the Home Connect™ app.

Use and Care Guide English | 11 |

Operating the Hood

For Better Results

•The blower should be turned on for about 5 minutes

before cooking in order to establish air currents upward

through the hood. Thus when heat, smoke, moisture,

grease and cooking odors are produced, they will be

carried outside instead of drifting into other rooms.

•Use the low speeds for normal use and the higher

speeds for strong odors or fumes.

•Drafts across the range or cooktop will reduce the

effectiveness of the hood. Such drafts should be

prevented when possible.

•The best job of ventilation in the kitchen is done where

the only air currents are those created by the blower

itself.

•Regular use of the fan system while cooking helps keep

the kitchen comfortable and less humid.

•Use a rear burner when browning or pan frying meat.

•For optimal performance, the width of the hood should

equal that of the cooktop or rangetop or exceed it by 3

inches on either side. Install these hoods only with

Thermador blowers.

Home Connect™

With Home Connect™, the appliance is Wi-Fi-capable and

can be remotely controlled using a mobile device (e.g.

tablet PC, smartphone). Home Connect™ app offers

additional functions which are a perfect complement to the

networked appliance.

Home Connect™ does not work over Wi-Fi networks that

require browser registration, i.e. a user name and password

entered via a web browser. You should have a stable wire-

less network with good reception and access to the inter-

net.

If the appliance is not connected to the WLAN network

(home network), it functions in the same way as a typical

hood with no network connection and can be operated as

usual via the Touch Panel.

NOTE: Please ensure that you follow the safety instructions

given at the beginning of this instruction manual and that

these are also observed when operating the appliance via

the Home Connect™ app and when away from home. Plea-

se also follow the instructions in the Home Connect™ app.

NOTE: Operation on the appliance itself always takes

priority, and during this time it is not possible to operate

the appliance using Home Connect™ App.

Cooktop-Hood Sync

You can connect this appliance to a matching cooktop (if

the cooktop supports connection to the hood) and then

control the functions of the hood via your cooktop.

There are various options for connecting the appliances:

Home ConnectTM

Two appliances can be connected using the Home Con-

nect™ app provided that both of them are Home Con-

nect™ compatible.

Refer to the Home Connect™ documents supplied for

more information.

Connecting appliances directly

If the appliance is connected directly to a cooktop, it can-

not be connected to your home network as well. The

appliance will function in the same way as a hood that is not

connected to the network and you can continue to operate

it via the touch control panel.

Connecting appliances via your home network

If the appliances are connected to each other via your

home network, both the hood controls on the cooktop and

Home Connect™ can be used to operate the appliance.

Notes

•Make sure you follow the safety instructions in the

instruction manual for your hood and that these are

complied with even when operating the appliance via

the hood controls on the cooktop.

•If the hood is being operated by means of the touch

control panel on the hood itself, this mode of operation

always has priority. It is not possible to use the hood

controls on the hob during this time.

Use and Care GuideEnglish | 12 |

Setting up a connection

To set up the connection between the hood and the cook-

top, the hood must be switched off and the cooktop must

be switched on before you can connect the cooktop and

hood.

Connecting directly

Ensure that the cooktop is switched on and is in search

mode.

To do this, refer to the section entitled “Connecting to the

hood” in the instruction manual for your cooktop.

Notes

•If your hood is connected directly to the cooktop, it

cannot be connected to your home network as well and

you will not be able to use Home Connect™.

•The cooktop must not be connected to your home

network. To break a connection, follow the instructions

in the section entitled “Disconnecting from the

network”.

Press and hold the CONNECT button until it starts to ash.

The hood has been connected to the cooktop when the

CONNECT button stops ashing and remains continuously

lit.

Connecting via your home network

Follow the instructions in the section entitled “Connecting

your hood to your home network (Wi-Fi) on page 13.

Once the hood is connected to your home network, you

can connect to the hob via the Home Connect™ app. To do

this. follow the instructions on your mobile device.

Setting up

To implement settings via Home Connect™, you must have

installed the Home Connect™ App on a mobile device (e.g.

tablet PC, smartphone).

Follow the steps specied by the app to implement the

settings.

What do you need to connect your hood

to Home Connect™?

•Your smartphone or tablet PC must be running the

latest version of the operating system it uses.

•A home network signal (Wi-Fi) at the location where the

home appliance is located.

•Name and password for your home network (Wi-Fi):

(SSID):..........................................................................

Password:....................................................................

Step 1: Installing the

Home Connect™ app

1. On your smartphone or tablet PC, go to the App

Store (Apple devices) or Google Play Store (Android

devices).

2. Enter “Home Connect” in the store’s search eld.

3. Select the “Home Connect (America)” app published by

BSH Home Appliances Corporation and install it on your

smartphone or tablet.

Open the Home Connect™ app and press “Register” to

create a new Home Connect™ account. The app will

guide you through the registration process. Don’t forget

to make a note of your e-mail address and password

afterwards.

Save your Home Connect™ login details here:

Email:........................................................................

Password:..................................................................

Use and Care Guide English | 13 |

Step 2 (initial start-up): Connecting your

hood to your home network (Wi-Fi)

A. Connect the appliance.

B. Check whether your home network router has A WPS

function (automatic connection) and locate the WPS

button. Refer to the router manual for more information.

C. Does your router have a WPS function (automatic

connection)?

Yes

Now go on to Step 2.1 –

Automatic connection

(WPS).

Now go on to Step 2.2 –

Manual connection

(Professional mode).

Step 2.1: Automatically connecting your

hood to your home network (Wi-Fi)

•Press SPEED 1 button.

•CONNECT and SPEED 1 buttons ash.

•WPS connection process started.

A. Note: To connect the hood to your home network,

the hood and the light must be switched off.

You can cancel the process at any time by pressing

“0”.

B. Press and hold the “CONNECT” button until “0”

and “CONNECT” start ashing.

C. Press “1”.

Note: “1” and “CONNECT” will ash.

D. If you have WPS (see previous page) press the WPS

button on your router.

Note: Please consult your router’s manual to locate

the WPS button.

E. When “CONNECT” and “3” ashes your appliance

is connected to the home network.

Go on to step 3.

Error: If the “CONNECT” and “2” light ashes then the

hood could not establish a connection with your home

Wi-Fi within 2 minutes.

Fix: Check whether your hood is in range of your Wi-Fi

and repeat the process. If unsuccessful, refer to step 2.2

to connect the oven manually.

Step 2.2: Manually connecting your hood

to your home network (Wi-Fi)

A. Note: To connect the hood to your home network, the

hood and the light must be switched off.

You can cancel the process at any time by pressing “0”.

B. Press and hold the “CONNECT” button until it start

ashing.

C. Press “2”.

Note: “2” and “CONNECT” will start ashing.

D. Open general settings on your mobile device and then

open Wi-Fi settings. Connect to the network named

“HomeConnect”.

This is your hoods Wi-Fi-network.

Use the following

Wi-Fi-Name/SSID: HomeConnect

Password/Key: HomeConnect

E. Open the Home Connect™ App on your mobile device.

F. The app will prompt you to enter your home Wi-Fi’s

network name and password.

Note: The app may take a few minutes to nd your

hood.

G. Next, follow directions in the App.

H. When “CONNECT” and Fan Setting “3” ashes your

appliance is connected to the home network.

Go on to step 3.

Error: The appliance fails to connect to the app (The

“CONNECT” light will turn off).

Fix: Ensure your smartphone or tablet is connected to

the same home network (Wi-Fi). Check that your wire-

less connection is stable and has a strong signal. Then

repeat the process from step 2.

Use and Care GuideEnglish | 14 |

Connecting your hood to another Home

Connect™ account

A. Open general settings on your mobile device and then

open Wi-Fi settings. Connect to the same home

network (Wi-Fi) as the hood.

B. Press and hold the “CONNECT” button until the

“CONNECT” and 3 buttons start ashing.

C. Open the app on your mobile device and follow the

instructions.

D. The registration process is complete once “CONNECT”

stops ashing on the hood.

If you want to change the wireless home network that

is connected to the hood, reset the connection to your

hood by:

A. Press and hold the “CONNECT” and fan setting “0”

buttons on your hood for at least 3 seconds. The

“CONNECT” button will turn off.

B. Repeat the process from step 2.

Software update

Using the software update function, your hood’s softwa-

re can be updated (e.g. for the purpose of optimization,

troubleshooting or security updates). To do this, you need

to be a registered Home Connect™ user, have installed the

app on your mobile device and be connected to the Home

Connect™ server.

As soon as a software update is available, you will be infor-

med through the Home Connect™ app and will be able to

start the software update via the app.

Once the update has been successfully downloaded, you

can start installing it via the Home Connect™ app if you are

on your local area network.

The Home Connect™ app will inform you once installation

is complete.

Notes

•You can continue to use your hood as normal while

updates are downloading.

•Depending on your personal settings in the app,

software updates can also be set to download

automatically.

•We recommend that you install security updates as

soon as possible.

Resetting the connection

You can reset the connections you have saved on your

home network and on Home Connect™ at any time.

•Press and hold the 0 and CONNECT buttons at the

same time until the CONNECT symbol is no longer

illuminated.

About Data Protection

When your appliance is connected for the rst time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to the

Home Connect™ server (initial registration):

•Unique appliance identication (consisting of appliance

codes as well as the MAC address of the installed Wi-Fi

communication module).

•Security certicate of the Wi-Fi communication module

(to ensure a secure IT connection).

•The current software and hardware version of your

domestic appliance.

•Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect™

functions for use and is only required when you want to use

these Home Connect™ functions for the rst time.

NOTE: Ensure that the Home Connect™ functions can be

used only in conjunction with the Home Connect™ app.

Information on data protection can be accessed in the

Home Connect™ app.

Use and Care Guide English | 15 |

Care and Cleaning

Grease Filters Cleaning

WARNING

Be sure the entire appliance (including the lters

and lights) has cooled and grease has solidied

before attempting to clean any part of the

appliance.

Your hood has removable aluminum mesh lters. They must

be cleaned when the FILTER light illuminates on the touch

panel or whenever they collect grease. When used over a

grill, wok or other high grease applications, more frequent

cleaning may be required.

The lters may be washed by hand or in the dishwasher.

Soak the ventilation lters in hot water using a mild deter-

gent. Rinse well and shake to dry.

Slight discoloration can occur when cleaning the lters in

a dishwasher. This has no inuence on the function of the

grease lters.

NOTE: Reverse the directions below to remove the lters.

Ensure lters are cool and grease has solidied before

removal.

NOTE: Do not use cooktop, rangetop, or range while hood

is disassembled.

To Install Filters:

•Remove the lter by pulling the spring release lter

latch and then pulling down the lter.

•Reinstall the lter by making sure the spring release

lter latch is toward the front. Insert aluminum lter

into upper track.

•Push in spring release lter latch.

•Push up on aluminum lter and release handle to latch

into place.

Access additional tips and tricks through the Home Con-

nect™ app.

Cleaning Chart

Anodized

Aluminum

Surfaces

Wash top and underside with hot sudsy

water.

Rinse and wipe dry or apply Fantastic®

or Formula 409® rst to a clean sponge

or paper towel and wipe clean. DO NOT

USE powdered cleaners or steel wool

pads.

Aluminum

Mesh Filters

Clean lters in the dishwasher or by

agitating in sudsy water. Ensure that

there is no soil trapped in the ne mesh.

Dry the lters before reinstalling them.

Plastic

surfaces

DO NOT REMOVE control buttons.

Wipe with a moist soapy sponge. Rinse

and dry.

Painted

surfaces

For general care, wipe the outside of the

hood with sudsy water or household

cleaners such as Fantastic or Formula

409, rinse well and dry with a clean soft

cloth to avoid water marks. DO NOT USE

powdered cleansers or steel wool pads.

Stainless

Steel

Surfaces

Wipe and dry stainless steel in the same

direction as the grain. Avoid using too

much pressure, which may mar the

surface. To remove nger prints and give

added shine, use cleaners such as

Stainless Steel Magic. Do not allow any

cleaning compounds to remain in contact

with stainless steel for extended periods.

Hood Surface Cleaning

•For general care, wipe the outside of the stainless

steel with mild, lukewarm, soapy water. Always wipe

and dry in the direction of the stainless steel grain.

Avoid using too much pressure, which may mar the

surface.

•DO NOT use abrasive products such as steel wool.

•DO NOT use cellulose sponges. Some sponges are

processed with salt and can cause corrosion by

leaving salt deposits on the metal.

•DO NOT allow any cleaning compounds to remain

in contact with stainless steel for extended periods.

•DO NOT USE CHLORINE-BASED CLEANERS.

• To remove ngerprints and produce added shine, use

a stainless steel cleaner or conditioner. The

THERMADOR Stainless Steel Conditioner can be

purchased online (US only) at:

www.store.thermador.com (order part number

00576697).

Use and Care GuideEnglish | 16 |

Problem Suggested Solution

Noise during operation Some noise is normal due to vibration and air movement.

Excessive noise could indicate one of the following:

a) Ductwork is too small / undersized

b) Ductwork is too large / oversized

c) Ductwork is loose

d) Transition is too small or is loose

e) Wood screws are not fully tightened

f) Loose screws in trim parts, etc.

Check Installation Manual to verify that ductwork is the proper size. Tighten

screws.

Noise when unit is off a) Backow ap on outside of duct wall cap moves with the wind. This is

normal.

Lights and fan blower do not

work

a) Hood circuit breaker may be tripped. Reset breaker.

Fan blower does not work a) Power supply is insufcient.

b) Electrical wiring is incorrectly connected.

See the Installation Manual for more information.

Hood trips breaker a) Electrical wiring is incorrectly connected.

b) Circuit is not sufcient.

See the Installation Manual for more information.

The hood is not venting

properly.

a) The hood may be too high from the cook top.

b) The hood may not be centered above the cook top.

c) Make up air not sufcient.

d) The wind from opened windows or opened doors in the surrounding area

is affecting the ventilation of the hood. Close all the windows and doors

to eliminate the outside air ow.

e) Blockage in the duct opening or ductwork. Remove all blockage from the

duct-work or duct opening.

f) Duct length too long, too many elbows, “back to back” elbows, or too

small roof or wall cap, will all cause issues with air draw.

See the Installation Manual for more information.

Service

Before Calling Service

Trobuleshooting

To reach a service representative, see the contact informa-

tion at the back of the manual. Before calling, please note

the complete model and serial number printed on your

product data rating label.

Use the suggestions in the table below before calling for

service to avoid service charges.

Use and Care Guide English | 17 |

How to Obtain Service or Parts

We want you to remain a satised customer. If a problem

comes up that cannot be resolved to your satisfaction plea-

se let us know.

To reach a service representative, see the contact informa-

tion at the back page of the manual. Whether you write

or call, please provide us with the Model Number, Serial

Number and Date of Original Purchase or Installation.

Product Data Rating Label

The data rating label shows the model and serial number.

Refer to the data label on the appliance when requesting

service. The data rating label is located on the frame be-

hind the lter. The data rating label is located on the frame

behind the lters. Remove the perimetral plate and the

lters to view it.

Service Information

For handy reference, copy the information below from the

data rating label located on the frame. Keep your invoice

for Warranty validation.

Model Number _______________________________________

Serial Number________________________________________

Date of Purchase _____________________________________

Also enter this information on the Product Registration

Form included with this product.

access to your product related information. You may regis-

ter your product through one of the following ways:

1. Mail in the completed THERMADOR Product

Registration card.

2. Register your product online at www.thermador.com.

3. Call us at THERMADOR customer service at

1-800-735-4328.

Statement of Limited Product Warranty

Use and Care Guide

The warranties stated herein apply to the original

purchaser of the product warranted herein and to each

succeeding owner of the product purchased for ordinary

home use during the term of the warranty.

Please make sure to register your Product; while not

necessary to effectuate warranty coverage, it is the best

way for Thermador to notify you in the unlikely event of a

safety notice or product recall.

How Long the Warranty Lasts

Thermador warrants that the Product is free from defects

in materials and workmanship for a period of seven

hundred and thirty (730) days from the date of the original

delivery. The foregoing timeline begins to run upon the

date of the original delivery, and shall not be stalled,

tolled, extended, or suspended, for any reason

whatsoever. This Product is also warranted to be free from

cosmetic defects in material and workmanship such as

scratches of stainless steel, paint/porcelain blemishes,

chips, dents, or other damage to the finish) of the Product,

for a period of sixty (60) days from the date of delivery or

closing date for new construction. This cosmetic warranty

excludes slight color variations due to inherent differences

in painted and porcelain parts, as well as differences

caused by kitchen lighting, product location, or other

similar factors. This cosmetic warranty specifically excludes

any display, floor, “As Is”, or “B” stock appliances.

Repair/Replace as Your Exclusive

Remedy

During this warranty period, Thermador or one of its

authorized service providers will repair your Product

without charge to you (subject to certain limitations stated

herein) if your Product proves to have been manufactured

English | 18 |

What this Warranty Covers & Who it

Applies to

The limited warranty provided by BSH Home Appliances

(“Thermador”) in this Statement of Limited Product

Warranty applies only to the Thermador appliance sold to

you (“Product”), provided that the Product was

purchased:

• For your normal, household (non-commercial) use,

and has in fact at all times only been used for normal

household purposes.

• New at retail from a BSH authorized dealer or directly

from BSH (not a display, "as is", or previously returned

model), and not for resale, or commercial use.

• Within the United States or Canada, and has at all

times remained within the country of original

purchase.

with a defect in materials or workmanship. If reasonable

attempts to repair the Product have been made without

success, then Thermador will replace your Product

(upgraded models may be available to you, in

Thermador's sole discretion, for an additional charge).

Nothing in this warranty requires damaged or defective

parts to be replaced with parts of a different type or

design than the original part. All removed parts and

components shall become the property of Thermador at

its sole option. All replaced and/or repaired parts shall

assume the identity of the original part for purposes of

this warranty and this warranty shall not be extended with

respect to such parts. Thermador's sole liability and

responsibility hereunder is to repair manufacturer-

defective Product only, using a Thermador authorized

service provider during normal business hours. For safety

and property damage concerns, Thermador highly

recommends that you do not attempt to repair the

Product yourself, or use a non-authorized service provider;

Thermador will have no responsibility or liability for

damage resulting from repairs or work performed by a

non-authorized service provider. Authorized service

providers are those persons or companies that have been

specially trained on Thermador products, and who

possess, in Thermador's opinion, a superior reputation for

customer service and technical ability (note that they are

independent entities and are not agents, partners,

affiliates or representatives of Thermador). Nevertheless,

taking your product to be serviced by a repair shop that is

not affiliated with or an authorized dealer of Thermador

will not void this warranty. Also, using third-party parts will

not void this warranty. Notwithstanding the foregoing,

Thermador will not incur any liability, or have

responsibility, for the Product if it is located in a remote

area (more than 100 miles from an authorized service

provider) or is reasonably inaccessible, hazardous,

threatening, or treacherous locale, surroundings, or

environment; in any such event, if you request, Thermador

would still pay for labor and parts and ship the parts to the

nearest authorized service provider, but you would still be

fully liable and responsible for any travel time or other

special charges by the service company, assuming they

agree to make the service call. Further, to the extent you

have installed the Product in a difficult-to-access location

or have otherwise installed temporary or permanent

fixtures that create barriers to accessing or removing the

Product, Thermador will not incur any liability for, or have

responsibility, for work or costs associated with moving

the Product or otherwise creating access to the Product in

order to repair or replace it. All such costs shall be your

sole responsibility.

Use and Care Guide English | 19 |

Out of Warranty Product

Thermador is under no obligation, at law or otherwise, to

provide you with any concessions, including repairs,

prorates, or Product replacement, once this warranty has

expired.

Warranty Exclusions

The warranty coverage described herein excludes all

defects or damage that are not the direct fault of

Thermador, including without limitation, one or more of

the following:

• Use of the Product in anything other than its normal,

customary and intended manner (including without

limitation, any form of commercial use, use or storage

of an indoor product outdoors, use of the Product in

conjunction with air or water-going vessels).

• Any party's willful misconduct, negligence, misuse,

abuse, accidents, neglect, improper operation, failure

to maintain, improper or negligent installation,

tampering, failure to follow operating instructions,

mishandling, unauthorized service (including self-

performed "fixing" or exploration of the appliance's

internal workings).

• Adjustment, alteration or modification of any kind.

• A failure to comply with any applicable state, local,

city, or county electrical, plumbing and/or building

codes, regulations, or laws, including failure to install

the product in strict conformity with local fire and

building codes and regulations.

• Ordinary wear and tear, spills of food, liquid, grease

accumulations, or other substances that accumulate

on, in, or around the Product.

• Any external, elemental and/or environmental forces

and factors, including without limitation, rain, wind,

sand, floods, fires, mud slides, freezing temperatures,

excessive moisture or extended exposure to humidity,

lightning, power surges, structural failures surrounding

the appliance, and acts of God.

• Service calls to correct the installation of your Product,

to instruct you how to use your Product, to replace

house fuses or correct house wiring or plumbing.

• Removal and replacement of trim or decorative panels

that interfere with servicing the Product.

• Damage or defects caused by labor or parts installed

by any non-authorized service provider, unless

approved by Thermador before service is performed.

In no event shall Thermador have any liability or

responsibility whatsoever for damage to surrounding

property, including cabinetry, floors, ceilings, and other

structures or objects around the Product. Also excluded

from this warranty are Products on which the serial

numbers have been altered, defaced, or removed; service

visits to teach you how to use the Product, or visits where

there is nothing wrong with the Product; correction of

installation problems (you are solely responsible for any

structure and setting for the Product, including all

electrical, plumbing or other connecting facilities, for

proper foundation/flooring, and for any alterations

including without limitation cabinetry, walls, floors,

shelving, etc.); and resetting of breakers or fuses.

TO THE EXTENT ALLOWED BY LAW, THIS WARRANTY

SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT

TO PRODUCT, WHETHER THE CLAIM ARISES IN

CONTRACT OR TORT (INCLUDING STRICT LIABILITY, OR

NEGLIGENCE) OR OTHERWISE. THIS WARRANTY IS IN

LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS

OR IMPLIED. ANY WARRANTY IMPLIED BY LAW,

WHETHER FOR MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE, OR OTHERWISE, SHALL BE

EFFECTIVE ONLY FOR THE PERIOD THAT THIS EXPRESS

LIMITED WARRANTY IS EFFECTIVE. IN NO EVENT WILL

THE MANUFACTURER BE LIABLE FOR

CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT,

"BUSINESS LOSS", AND/OR PUNITIVE DAMAGES,

LOSSES, OR EXPENSES, INCLUDING WITHOUT

LIMITATION TIME AWAY FROM WORK, HOTELS AND/

OR RESTAURANT MEALS, REMODELLING EXPENSES IN

EXCESS OF DIRECT DAMAGES WHICH ARE

DEFINITIVELY CAUSED EXCLUSIVELY BY THERMADOR,

OR OTHERWISE. SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, AND SOME STATES DO

NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE EXCLUSIONS OR

LIMITATIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY

FROM STATE TO STATE.

No attempt to alter, modify or amend this warranty shall

be effective unless authorized in writing by an officer of

BSH.

Obtaining Warranty Service

To obtain warranty service for your product, you should

contact Thermador Customer Service at 1-800-735-4328

to schedule a repair.

Product information

For handy reference, copy the information below from the

rating plate. Keep your invoice and/or delivery documents

for warranty validation..

Model number (E-Nr.)

Production number (FD)

Date of delivery

Français | 20 |

Mode d’emploi de Home Connect

Module Wi-Fi®

FCC/IC

Déclarations

No ID CMIIT (Chine): 2017AJ4134 (M)

FCC: 2AHES-COM2

IC: 21152-COM2

Le module Home Connect est un dispositif de communication

conçu pour permettre des échanges entre

les appareils électroménagers et les appareils intelligents.

Ce module est intégré en usine, sous le contrôle direct de BSH Home

Appliances Corporation, et ne peut pas être réparé ni mis à niveau par l’utilisateur.

Au moins 20 cm de distance doivent séparer l’utilisateur de l’appareil.

DÉCLARATION DE CONFORMITÉ DE LA FCC

MISE EN GARDE : Tout changement ou toute modiﬁcation n’ayant pas fait l’objet d’une autorisation

expresse peut entraîner l’annulation du droit d’utilisation de l’équipement.

Ce dispositif est conforme à la section 15 de la réglementation de la FCC.

Le fonctionnement est soumis aux deux conditions qui suivent:

(1) Cet appareil ne doit pas générer d’interférence et (2) doit accepter toute interférence reçue, notam-

ment celle pouvant entraîner un mauvais fonctionnement.

DÉCLARATION D’INDUSTRIE CANADA

Cet appareil est conforme à la norme ou aux normes RSS sous exemption de licence d’Industrie Canada.

Le fonctionnement est soumis aux deux conditions qui suivent : (1) cet appareil ne doit pas générer

d’interférence et (2) doit accepter toute interférence reçue, notamment celle pouvant entraîner un

mauvais fonctionnement dudit appareil

La page est en cours de chargement...

Thermador HMIB42WS Mode d'emploi

Marque: Thermador

Modèle: HMIB42WS

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Thermador HMIB42WS User guide
español: Thermador HMIB42WS Guía del usuario

Documents connexes

Autres documents

Bosch HCP50652UC Manuel utilisateur