Samsung UE46D7000LS Le manuel du propriétaire

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

E-MANUAL

BN68-03438G-03

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

www.samsung.com/be_fr (French)

CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 70 70 19 70 www.samsung.com/dk

FINLAND 030 - 6227 515 www.samsung.com/

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it

LUXEMBURG 261 03 710 www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND 0 801 1SAMSUNG (172678)

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se

TURKEY 444 77 11 www.samsung.com/tr

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

EIRE 0818 717100 www.samsung.com/ie

SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch

www.samsung.com/ch_fr/(French)

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

[UD7000-ZF]BN68-03438G-03L04.indb 1 2011-04-21 오전 9:11:20

English - 2

For more information on how to use e-Manual (p. 14)

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance. Product design and speciﬁcations may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are

broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local

dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so

on, are not included in this speciﬁcation. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV

performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconﬁguring TV setting or

not.

Still image warning

Avoid displaying still images (like jpeg picture ﬁles) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at

screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of

this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try do display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to e-Manual for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

• Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,

headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible

harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste

and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the

retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take these items

for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other

household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery

contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,

these substances can cause harm to human health or the environment. To protect natural resources and to promote material

reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

10 cm10 cm

10 cm

[UD7000-ZF]BN68-03438G-03L04.indb 2 2011-04-21 오전 9:11:20

English - 3

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your

dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

[

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Remote Control & Batteries (AAA x 2) • Power Cord

• Owner’s Instructions • Cleaning-Cloth

• Warranty Card (Not available in some locations) / Safety Guide

Samsung 3D Active Glasses

Scart Adapter (2 EA) AV/Component Adapter

Holder-Wire stand Holder Ring (4 EA) CI Card Adapter

• An administration fee may be charged if either

– (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

– (b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

Assembling the Holder-Wire stand

[UD7000-ZF]BN68-03438G-03L04.indb 3 2011-04-21 오전 9:11:21

English - 4

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

✎

There are control buttons in rear of TV. When you touch the button, control icons appears. When 3D mode

is activated, the control icon will not be appeared.

✎

Any object (an electric wire, etc.) near the control panel may cause unintended activation of the OSD.

Remote control sensor Aim the remote control towards this spot on the TV.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

E

(Source)

Toggles between all the available input sources. In the on-screen menu, use

this button as you would use the ENTER

E

button on the remote control.

m

(Menu)

Displays an on-screen menu, the OSD (on screen display) of your TV’s

features.

o

(Volume)

Adjusts the volume. In the OSD, use the

wv

buttons as you would use the

◄ and ► buttons on the remote control.

k

(Channel) Changes the channels. In the OSD, use the

<>

buttons as you would

use the ▼ and ▲ buttons on the remote control.

P

(Power)

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).

A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug

the power cord.

TV Rear

[UD7000-ZF]BN68-03438G-03L04.indb 4 2011-04-21 오전 9:11:21

English - 5

Viewing the Remote Control

✎

This is a special remote control for the visually impaired persons and has Braille points on the Power,

Channel and Volume buttons.

Installing batteries (Battery size: AAA)

CH LIST

MUTE

POWER

SOURCE

PRE-CH

E-MANUAL

P.SIZE

AD/SUBT.

TTX/MIX

ON/OFF

SOCIAL

TV

Turns the TV on and off.

Displays and selects the available video

sources.

Turns the remote control light on or off.

When on, the buttons become illuminated

for a moment when pressed. (Using the

remote control with this button set to On

will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme

Guide).

Displays information on the TV screen.

OFN (Optical Finger Navigation) Sensor

can be used as a pointer only in Web

Browser application.

If you don’t press any buttons within

30 seconds, the sensor will turn off

automatically. To wake up the sensor,

press ENTER, Navigation, Colour, REW,

FF, Return buttons.

While you use this sensor, the backlight

will not be operated.

Exits the menu.

Have direct access to channels.

Adjusts the volume.

Alternately select Teletext ON, Double,

Mix or OFF.

Opens the OSD.

Quickly select frequently used functions.

Link to various application services.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

These buttons are for the Channel

Manager, SMART HUB menu, etc.

Use these buttons in a speciﬁc feature.

For details, refer to e-Manual.

SOCIAL TV: Displays the Social TV

screen.

SEARCH: Support to recommendation

search word and search function.

W

: Sets the video, which provided with

3D signal.

E-MANUAL: Displays the e-Manual.

P.SIZE: Selects the Picture size.

AD/SUBT.: Turns the audio description on

and off (not available in some locations). /

Displays digital subtitles.

[UD7000-ZF]BN68-03438G-03L04.indb 5 2011-04-21 오전 9:11:22

English - 6

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

• Maximum thickness - 0.55 inches (14mm)

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the mains and antenna.

VHF/UHF Antenna CableSatellite

or

Changing the Input Source

Source

Use to select TV or an external input

sources such as a DVD / Blu-ray player

/ cable box / STB satellite receiver.

■ TV / Ext.1 / Ext.2 / PC / HDMI1/

DVI / HDMI2 / HDMI3 / HDMI4 /

AV / Component / USB / AllShare

✎

In the Source, connected inputs will

be highlighted.

✎

Ext.1, Ext.2 and PC always stay activated.

Edit Name

In the Source, press the TOOLS button, and then you

can set an external input sources name you want.

■ VCR / DVD / Cable STB / Satellite STB / PVR

STB / AV Receiver / Game / Camcorder / PC

/ DVI PC / DVI Devices / TV / IPTV / Blu-ray

/ HD DVD / DMA: Name the device connected

to the input jacks to make your input source

selection easier.

✎

When connecting a PC to the HDMI IN 1(DVI)

port with HDMI cable, you should set the TV

to PC mode under Edit Name.

✎

When connecting a PC to the HDMI IN 1(DVI)

port with HDMI to DVI cable, you should set

the TV to DVI PC mode under Edit Name.

✎

When connecting an AV devices to the HDMI

IN 1(DVI) port with HDMI to DVI cable, you

should set the TV to DVI Devices mode

under Edit Name.

Edit Favourites

In the Source, press the TOOLS button to select Edit

Favourites. You can set an external input source to

Favourites.

Information

You can see detailed information about the selected

external device.

Refresh

In the Source, If the external devices is not displayed,

press the TOOLS button to select Refresh. Searching

for connected devices.

SOURCE

[UD7000-ZF]BN68-03438G-03L04.indb 6 2011-04-21 오전 9:11:22

English - 7

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings.

Press the POWER

P

button. Plug & Play is available only when the Source is set to TV.

✎

Before turning on the TV, make sure the antenna cable is connected (p. 6).

1

Selecting the OSD

Language

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired OSD (On Screen Display) language.

2

Setting up the Network

Set up your network connection. Press the ENTER

E

button to start. If you do

not know your network set up information or want to set to it later, select Skip.

We suggest you skip network connection setup now and refer to “Network

menu” in the e-Manual for set up requirements and instructions, and the

Network Connection section of this manual (p. 13).

You can set up the network connection later using the Network menu.

3

Software Upgrade Select Next to upgrade TV software. Your TV will automatically upgrade, if your

TV need a software upgrade. If you want to upgrade later, select the Skip. For

more information, refer to “Software Upgrade” (Preference Features → Support

Menu) in the e-Manual.

✎

This may take some time, depending on network status.

4

Selecting the usage

mode

Press the ▲ or ▼ button to select Home Use, and then press the ENTER

E

button twice.

✎

Select the Home Use mode. Store Demo mode is for retail environments.

5

Select Country

(Depending on the

country)

Press the ▲ or ▼ button, then press the ENTER

E

button. Select the

appropriate country.

✎

After selecting the country in the Country menu, some models may

proceed with an additional option to setup the pin number.

✎

When you input the PIN number, 0-0-0-0 is not available.

6

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

Auto: Select the time zone where you are located.

Manual: Allows you to manually set the current date and time.

7

Selecting search

options for auto tuning

Press the ▲ or ▼ button, then press the ENTER

E

button. Select the channel

source to memorise. When setting the antenna source to Cable, a step appears

allowing you to assign numerical values (channel frequencies) to the channels.

For more information, refer to Channel → Auto Tuning.

✎

When Air or Cable is selected first: After all Air or Cable channels are

stored, the step for storing Satellite channels is displayed.

✎

When Satellite is selected first: After all Satellite channels are stored, the

step for storing Air or Cable channels is displayed.

✎

Press the ENTER

E

button at any time to interrupt the memorisation

process.

8

Enjoy your TV. If you want to watch a broadcast Programme, select Close. If you want to enjoy

the Smart Hub, select the Smart Hub. The Smart Hub will start. For more

detailed information, refer to “Smart Hub” in the e-Manual.

If You Want to Reset This Feature...

You should do Plug & Play (MENU → System) again at home although you did in shop.

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”

(except France). If you want to change the PIN number, use the Change PIN function.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,

which resets the PIN to “0-0-0-0” (France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

[UD7000-ZF]BN68-03438G-03L04.indb 7 2011-04-21 오전 9:11:23

English - 8

Connecting to AV devices

¦

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite

receiver, VCR, Digital Audio System, Ampliﬁer, DVD home Theatre, PC

Using an HDMI or an HDMI to DVI cable (up to 1080p)

✎

HDMI IN 1(DVI), 2(ARC), 3, 4 / PC/DVI AUDIO IN

x

For better picture and audio quality, connect to a digital device using an HDMI cable.

x

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and

audio cables.

x

The picture may not display normally (if at all) or the audio may not work if an external device that

uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the

manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

x

Be sure to use an HDMI cable with a thickness of 14 mm or less.

x

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection

error may occur.

x

A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support

the ethernet function via HDMI.

x

This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note

that the ARC function is supported by the HDMI IN 2(ARC) port only.

– If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this case,

set 3D Auto View or 3D Mode to Off.

x

The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only

when the TV is connected with an audio receiver that supports the ARC function.

(DVI)

(ARC)

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

HDMI connection

HDMI to DVI connection

[UD7000-ZF]BN68-03438G-03L04.indb 8 2011-04-21 오전 9:11:23

English - 9

Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable

✎

In Ext. mode, DTV Out supports MPEG SD Video and Audio only.

✎

When connecting to AV IN, connect the AV connector(yellow) to the TV jack(Green).

✎

To obtain the best picture quality, the Component connection is recommended over the A/V

connection.

AUDIO OUT

R-AUDIO-L

VIDEO OUT

AUDIO OUT

R-AUDIO-L

P

R

P

B

Y

COMPONENT OUT

G

B

W

R

Y

W

R

G

EXT

Component connection

AV connection

SCART connection

[UD7000-ZF]BN68-03438G-03L04.indb 9 2011-04-21 오전 9:11:23

English - 10

Connecting to a PC and Audio device

¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

✎

Connecting through the HDMI cable may not be supported depending on the PC.

Display Modes (D-Sub and an HDMI to DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

1152 x 870

35.000

49.726

68.681

66.667

74.551

75.062

30.240

57.284

100.000

-/-

VESA DMT

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 1024

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1680 x 1050

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

47.712

55.935

70.635

65.290

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.015

59.887

74.984

59.954

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

83.500

106.500

108.000

85.500

106.500

136.750

146.250

-/-

+/+

-/-

+/+

-/+

+/+

-/+

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

DVI OUT

AUDIO OUT

PC OUT

HDMI OUT

PC connection

[UD7000-ZF]BN68-03438G-03L04.indb 10 2011-04-21 오전 9:11:24

English - 11

¦ Available devices: digital audio system, ampliﬁer, DVD home theatre

Using an Optical (Digital) a Headphone Connection

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the

volume of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.

When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.

When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-

Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the

home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your

DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.

✎

Headphones

H

: You can connect your headphones to the headphones output on your set. While the

headphones are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

OPTICAL

DVD home theatre connection

Headphones connection

[UD7000-ZF]BN68-03438G-03L04.indb 11 2011-04-21 오전 9:11:24

English - 12

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

✎

We recommend attaching the adapter before installing

the wall mount, or inserting the “CI or CI+ CARD”.

1. Insert the CI CARD Adapter into the two holes on the

product 1.

✎

Please find a two holes on the rear of the TV. A two

holes is beside the COMMON INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON

INTERFACE port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommand that you insert the CI card before you mount the TV on a wall. It may be difﬁcult to

insert after the mounting. Insert the card after attaching the CI Card Adapter on TV. It is difﬁcult to

attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you don’t insert the “CI or CI+ CARD”, some channels will display

the message “Scrambled Signal”.

• The pairing information containing a telephone number, the “CI or CI+

CARD” ID the Host ID and other information will be displayed in about

2~3 minutes. If an error message is displayed, please contact your

service provider.

• When the conﬁguration of channel information has ﬁnished, the

message “Updating Completed” is displayed, indicating the channel

list is updated.

✎

NOTE

x

You must obtain a “CI or CI+ CARD” from a local cable service provider.

x

When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+

CARD” may cause damage to it.

x

Insert the “CI or CI+ CARD” in the direction marked on the card.

x

The location of the COMMON INTERFACE slot may be different depending on the model.

x

“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

x

If you have any problems, please contact a service provider.

x

Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or

will not be seen.

TV Rear

[UD7000-ZF]BN68-03438G-03L04.indb 12 2011-04-21 오전 9:11:26

English - 13

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or

wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.

Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung

recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may

not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network

through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code

called an access key.

If Pure High-throughput (Greenﬁeld) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with

new Wi-Fi certiﬁcation speciﬁcations.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup.

They are illustrated below:

✎

It is not supported when the network speed is under 10 Mbps.

✎

Use Cat 5 cable for the connection.

The LAN Port on

the Wall

LAN Cable

Wireless IP sharer

(Router having DHCP server)

TV

LAN CableModem Cable

The Modem Port on the Wall

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

The LAN Port on the Wall

TV Rear Panel

LAN Cable

[UD7000-ZF]BN68-03438G-03L04.indb 13 2011-04-21 오전 9:11:26

English - 14

How to view the e-Manual

Screen Display

Using the Help

Display the e-Manual Guide & the Product Guide by pressing Help.

<E-manual Guide>

The e-Manual guide appears as above.

The product guide appears as above.

How to toggle between the e-Manual and the corresponding menu(s).

✎

This function is not enabled in some menus.

You can read the introduction and instructions about the TV features stored in

your TV.

O

MENU

m

→ Support → e-Manual → ENTER

E

✎

If you want to return to e-Manual, press E-MANUAL button on remote.

✎

You can’t use the Try Now function, if the menu is not activated.

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

IndexHelp

TV Screen: Displays the current

input source screen.

Help: Displays the e-Manual

Guide or Product guide. Press

ENTER

E

button.

Change the category. Press

l

or

r

button to select category you want.

Displays the sub-menu list. Press

ENTER

E

button to select sub-

menu you want.

Index: Displays index screen.

X: Exit the e-Manual.

Help Try Now Home Zoom Index

Basic Features > Changing the Preset Picture Mode (5/10)

 Changing the Preset Picture Mode

■

Picture Mode t

Select your preferred picture type.

N When an input source is set to PC, the Picture Mode is only available the

Standard and Entertain.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural

for LED TV

/ Relax

for PDP TV

: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain (In PC mode only): Suitable for watching movies and games.

Picture

Picture Mode Standard

Tint (G/R) G 50 R 50

Colour 50

Sharpness 50

Brightness 45

Contrast 100

Backlight 14

E-MANUAL

Try Now

Return

 How to view the e-Manual

You can read the introduction and instructions about

the TV features stored in your TV.

O MENU

m

→ Support → e-Manual → ENTER

E

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

IndexHelp

Return

Sync media from multiple devices with AllShare

AllShare™ syncs your digital devices so you can

enjoy music, movies and photos from your PC,

camera and mobile devices, on your larger TV

screen. Connects you to multiple PCs, as well.

E-MANUAL

[UD7000-ZF]BN68-03438G-03L04.indb 14 2011-04-21 오전 9:11:31

English - 15

Method 1 Method 2

1. Select Try Now, if you want to execute the

corresponding menu(s).

2. To return to the e-Manual screen, press the

E-MANUAL button.

1. Press the ENTER

E

button when selecting

Contents Area. The “Are you sure?” is displayed.

Select Yes and then press the ENTER

E

button. The OSD window will be displayed.

2. To return to the e-Manual screen, press the

E-MANUAL button.

Viewing the Contents

Using the Zoom mode

When you view the e-Manual instruction, select the

Zoom to magnify the screen. You can scroll through

the magniﬁed screen by using the

u

or

d

buttons.

✎

To return to the previous screen, press the

RETURN button.

How to search a keyword by using index page

✎

This function may not supported depending on the language.

1. If you want to search a keyword, press the

u

/

d

/

l

/

r

button to select Index.

2. Press the

l

or

r

button to select a character order you want, and then press the ENTER

E

button.

3. Press the

u

or

d

button to select a keyword you want to see, and then press the ENTER

E

button.

4. You can view the corresponding e-Manual instruction screen.

✎

To close the Index screen, press the RETURN button.

Basic Features > Changing the Preset Picture Mode (5/10)

Help Try Now Home Zoom Index

 Changing the Preset Picture Mode

O MENU

m

→ Picture → Picture Mode → ENTER

E

■

Picture Mode t

Select your preferred picture type.

N When an input source is set to PC, the Picture Mode is only avalable

the Standard and Entertain.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural

for LED TV

/ Relax

for PDP TV

: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain(In PC mode only): Suitable for watching movies and games.

Try Now: Displays the corresponding menu(s).

Home: Moves to the e-Manual home screen.

Zoom: Magniﬁes a screen.

Index: Displays index screen.

Contents Area: You can view the corresponding

contents, if you selected a sub-menu. To move

previous or next page, press the

l

or

r

button.

Return

 Changing the Preset Picture Mode

O MENU

m

→ Picture → Picture Mode → ENTER

E

■

Picture Mode t

Select your preferred picture type.

N When an input source is set to PC, the Picture Mode is only avalable the Standard

and Entertain.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural

for LED TV

/ Relax

for PDP TV

: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain (In PC mode only): Suitable for watching movies and games.

[UD7000-ZF]BN68-03438G-03L04.indb 15 2011-04-21 오전 9:11:32

English - 16

Installing the Wall Mount

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a

technician for assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect

to install the TV on your own.

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

To install a wall-mount, use the Holder-Ring 1.

1

[UD7000-ZF]BN68-03438G-03L04.indb 16 2011-04-21 오전 9:11:32

English - 17

Wall Mount Kit Speciﬁcations (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the ﬂoor. When attaching to other building materials,

please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal

injury.

✎

NOTE

x

Standard dimensions for wall mount kits are shown in the table below.

x

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly

are provided.

x

Do not use screws that do not comply with the VESA standard screw specifications.

x

Do not use screws that are longer than the standard dimension or do not comply with the VESA standard

screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

x

For wall mounts that do not comply with the VESA standard screw specifications, the length of the

screws may differ depending on the wall mount speciﬁcations.

x

Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

x

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall

mount is used or the consumer fails to follow the product installation instructions.

x

Our 55” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall

mount kit for this model.

x

Do not mount the TV at more than a 15 degree tilt.

Product Family inches VESA Spec. (A * B) Standard Screw Quantity

LED-TV

19~22 75 X 75

M4

4

23~27 200 X 100

32~40 200 X 200

M846~55 400 X 400

60~65 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury

due to electric shock.

[UD7000-ZF]BN68-03438G-03L04.indb 17 2011-04-21 오전 9:11:33

English - 18

Securing the TV to the wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure

that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,

resulting in serious injuries or death. Follow all safety precautions provided in the included Safety

Flyer. For added stability and safety, install the anti-fall device as follows.

To Avoid the TV from Falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall.

Conﬁrm that the screws have been ﬁrmly installed onto the wal

l.

✎

You may need additional material such as an anchor depending on

the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into

the clamps, and then fasten the screws onto the TV agai

n.

✎

Screws may not be supplied with the product. In this case, please

purchase the screws of the following specifications.

✎

Screw Specifications

x

For a 19 ~ 27 inch: M4

x

For a 32 ~ 65 inch: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the wall with a strong cable and then tie the

string tightly.

✎✎

NOTE

x

Install the TV near to the wall so that it does not fall backwards.

x

It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the

clamps fixed on the TV.

x

Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If

you have any doubt about the security of your connections, contact a professional installer.

Wall

[UD7000-ZF]BN68-03438G-03L04.indb 18 2011-04-21 오전 9:11:33

English - 19

Troubleshooting

If you have any questions about the TV, ﬁrst refer to this list. If none of these troubleshooting tips apply, please

visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this

manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns

on, refer to “Remote control does not work” below.

There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external

devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections

to the TV input. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the TV on or off, or adjust the

volume.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for

the SAMSUNG TV code.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to

produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact

on the performance of the product.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →

Support → Downloads) by USB.

Licence

[UD7000-ZF]BN68-03438G-03L04.indb 19 2011-04-21 오전 9:11:33

English - 20

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be

viewed without a cable box / STB (Set-Top-Box) satellite receiver.

3D

This exciting new feature enables you to view 3D content.

SMART HUB

The Gateway to all content integrated in one place

• It’s all integrated to guide you to easier and diverse entertainment choices

• Control your entertainment life with easy and simple user friendly UI

• Access to diverse Apps that are adding up every day

• Customize your TV, by App grouping & sorting to your taste

AllShare™

AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

Anynet+(HDMI-CEC)

Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

Skype

With Skype you can say hello or share a laugh with anyone, anywhere. Communicate with people around the

world!

Storage and Maintenance

✎

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please

clean it to watch TV.

Do not spray water or a cleaning agent directly onto

the product. Any liquid that goes into the product may

cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dapped in a small

amount of water.

[UD7000-ZF]BN68-03438G-03L04.indb 20 2011-04-21 오전 9:11:34

La page charge ...

Samsung UE46D7000LS Le manuel du propriétaire

Ce manuel convient également à

Samsung UE46D7000LS Le manuel du propriétaire

dans d''autres langues

Documents connexes