Dorel Home 4663019N Assembly Manual

4663019N(Black&White)

B344663019N00-KT

Date of Purchase

Metal & Mesh Loft Bed with Desk & Shelves

S.L. - 2023/6/30

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Lot Number (TAKEN FROM CARTON)

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Twin

Visit www.dhpfurniture.com/eng/replacement-parts

or call Toll-Free 1-800-267-1739

You can also chat with us at www.dhpfurniture.com

Weight Limit:

Upper Bed: 200 LBS / 91 KG

Desk: 70 LBS / 32 KG

Shelf: 50 LBS / 23 KG Questions, concerns, missing parts?

CONTACT OUR CUSTOMER SERVICE

DEPARTMENT BEFORE RETURNING PRODUCT

TO THE RETAILER.

2

Limited 1 year Warranty

DHP warrants this product to be free from defects in material and

workmanship and agrees to remedy any such defect. This warranty covers

one year from the date of original purchase from authorized retailers. This is

solely limited to the repair or replacement of defective parts and assembly

labor is not included.

This warranty does not apply to any product which has been improperly

assembled, subjected to misuse or abuse or which has been altered or

repaired in any way.The warranty does not cover wearing, tearing, fading or

splitting of the fabric (where applicable). Liability for consequential damages

is excluded to the extent exclusion is permitted by law. This warranty gives

you specific legal rights and you may also have other rights which vary from

state to state or province to province.

To obtain warranty service, purchaser must present original bill of sale.

Components repaired or replaced are warranted through the remainder of

the original warranty period only. The defective components will be repaired

or replaced without charge, subject to the terms and conditions described

above.

The terms and conditions of the limited warranty are subject to change

without notice. For the latest warranty policy, please visit

www.dhpfurniture.com.

Contact Us!

cs@dhpfurniture.com

1-800-267-1739

DHP Consumer Services

12345 Albert Hudon, Suite 100,

Montreal, Quebec H1G 3L1

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Read Before Beginning Assembly

 Work in a spacious area and near where the unit will be used, preferably

on a carpet, or use a piece of the cardboard packaging to protect your floor

and product.

 Make sure all parts are included. Most parts are labeled or stamped on the

raw edge.

 Read each step carefully. It is very important that each step of the

instructions is performed in the correct order. If these steps are not followed in

sequence, assembly difficulties will occur.

 This product may contain small components. Please ensure that they are

kept away from small children.

 This product is designed for home use and is not intended for commercial

use.

www.dhpfurniture.com

Chat

with us

Chat

with us

This product is shipped in

1 carton

2 hours

Do NOT use

powertools

Two persons and adult assembly required

3

WARNING

Loft bed: Twin

 STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed; for example, but not

limited to, hooks, belts and jump ropes.

 Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed.

 The mattress platform is designed to support a mattress without the need for a posture board or box spring.

 Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.

 Use only mattresses which are 74" - 75" long and 37" - 38" wide on upper bed. Ensure thickness of mattress does not exceed 6". Surface of mattress

must be at least 5" (127 mm) below the upper edge of guardrails. For your comfort, we suggest a minimum mattress thickness of 4".

 Do not allow children under 6 years of age to use the upper bunk.

 Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed

should be placed against the wall to prevent entrapment between the bed and wall (applicable for bunk beds with full length guardrails on one side).

 Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are

tight.

 Do not allow horseplay on or under the bed and prohibit jumping on the bed.

 Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.

 Replacement parts, including additional guardrails, may be obtained from DHP by contacting customer service at 1-800-267-1739.

 Use of a night light may provide added safety precaution for a child using the upper bunk.

 The use of water or sleep flotation mattresses is prohibited.

 Always use the ladder for entering and leaving the upper bunk.

 Prohibit more than one person on upper bunk.

 Keep these instructions for future reference.

4

PARTS LIST

N

T

T1

A

B

C

D

Z

I1

I

K

W

F

E

J

O

M

R

K1

K2

Y

Q

5

Each part has a unique part number. Please

reference the appropriate part number when

contacting customer service for replacement

parts.

Before throwing any packaging, please

verify all contents and make sure you have

received all the parts listed above!

Leg Cap

T393370

X 4

Leg Cap

T393370

X 4

End Guard Rail

1 PC

End Guard Rail

1 PC

Post

1 PC

Post

1 PC

Post

1 PC

Guard Rail

1 PC

A B C

I I1E

PARTS LIST

PART LABELS 4663019N(Black&White)

AT1030050

BT1030060

CT1030070

D T1030080

IT1030090

I1 T1030100

ET1030110

FT1030120

PART NUMBERS

D

Post

1 PC

Guard Rail

1 PC

F

6

Each part has a unique part number. Please

reference the appropriate part number when

contacting customer service for replacement

parts.

Before throwing any packaging, please

verify all contents and make sure you have

received all the parts listed above!

JK1

O

Z

Ladder

1 PC

PARTS LIST

N

K

Desk Side Panel

1 PC

M

K2

Lower Back Brace

1 PC

Shelf Support Frame

1 PC Brace

1 PC

Desk Support Frame

1 PC Desk

1 PC Slat

22 PCS

PART LABELS 4663019N(Black&White)

J T1030130

KT1030140

K1 T1030150

K2 T1030160

MT1030170

NT1030180

ZT1030190

OT919600

PART NUMBERS

7

Each part has a unique part number. Please

reference the appropriate part number when

contacting customer service for replacement

parts.

Before throwing any packaging, please

verify all contents and make sure you have

received all the parts listed above!

T

YW

Corner Shelf

2 PCS Slat Spacer

21 PCS

Plastic Plug

44 PCS Slat Spacer

22 PCS

PARTS LIST

Q

T1

Side Lower Rail

1 PC

R

Side Lower Rail

1 PC

PART NUMBERS

PART LABELS 4663019N(Black&White)

TT1030200

T1 T1030210

RT1030220

QT919490

YT392590

WT919480

8

Please do not completely tighten all the hardware,

until the entire assembly is complete, unless

otherwise indicated in the step-by-step instructions.

The screw(s), bolt(s) to be used at each step are

shown in actual size in the lower right corner of the

page.

HARDWARE LIST

Hardware Pack

4663019N(Black&White) HP#: T4663019N-00

2

5/16" X 2 25/32"

4 PCS

3

4

1

4mm

1 PC

1/4" X 1 1/16

4 PCS

5

1/4" X 25/32"

12 PCS

1/4" X 7/8"

12 PCS

678

1/4" X 3/8"

2 PCS

910

1/4" X 2 3/16"

4 PCS

1/4" X 2 3/16"

6 PCS

1/4" X 1 3/8

6 PCS

1/4" X 2 25/32"

4 PCS

EF

EG

9

Step1

X 4

1.1 Attach I to A/B with .

1.2 Attach T to A/B with .

4

X 4

1.1 1.2

Warning label

should be facing

inside of bed.

4

7

B

I

A

T

A

I

7

EH

EJ

10

Step2

X 2

2.1 2.2

X 2

2.1 Attach I1 to D with .

2.2 Attach I1 to C with .

4

7

C

I1

D

I1

7

I1

D

C

EK

11

Step3

X 4

Attach T1 to C and D with .

Holes on T1 should be

closest to POST D and

aligned with holes on I1.

C

D

T1

7

I1

C

EL

12

Step4

X 4

Attach E to B/C and F to A/D with ,.

The hole is in

this position

The hole is in

this position

X 4

3

1

E

C

D

A

B

F

B

Wide side of the slot should

be facing up and inside!

1

EM

13

Step5

X 2 X 2

Attach J to B/C with ,.

Holes on J should be

closest to POST B.

7

2

J

B

C

7

2

14

Step6

EE

6.1 6.2

O

6.1 Insert O into E/F as illustrated.

6.2 Put the slat O downwards to the

shorter slot.

O

E

O

E

F

15

Step7

EE

O

Lock O into place with Y on the longer slot.

Y

O

E

Y

F

16

Step8

WQ

O

W

8.1 Press W onto the middle of O as

illustrated.

8.2 Press Q onto W alternating left and

right as illustrated.

8.1 8.2

O

W

Q

EN

17

Step9

X 4

Attach Z to T1 and I1 with .

8

I1

Z

I1

Z

T1

8

For better performance, the

ladder Z shall be assembled

in the direction indicated.

EP

18

Step10

X 2

Attach K to A with .

A

K

A

K

5

ET

FE

19

Step11

X 4

2

Attach M to J and K with  .

J

M

J

M

K

5

Screw hole on bottom

of M should be placed

near Post B.

M

B

EU

20

Step12

Attach N onto M with .

X 4

M

N

6

La page charge ...

Dorel Home 4663019N Assembly Manual

Dorel Home 4663019N Assembly Manual

dans d''autres langues

Documents connexes

Autres documents