Robustel R3000 Lite Hardware Manual Manuel utilisateur
- Taper
- Manuel utilisateur
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 1/10
R3000 Lite
Hardware Manual
Version: 1.0.1
Date: Nov. 22, 2022
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 2/10
Regulatory and Type Approval Information
Table 1: Toxic or Hazardous Substances or Elements with Defined Concentration Limits
Name of the Part
Hazardous Substances
(Pb)
(Hg)
(Cd)
(Cr (VI) )
(PBB)
(PBDE)
Metal parts
o
o
o
o
o
o
Circuit modules
o
o
o
o
o
o
Cables and cable assemblies
o
o
o
o
o
o
Plastic and polymeric parts
o
o
o
o
o
o
o:
Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in 2011/65/EU and SJ/T11363-2006.
x:
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this
part might exceed the limit requirement in 2011/65/EU and SJ/T11363-2006.
Radio Specifications for Europe
RF technologies
2G, 3G, 4G
Cellular Frequency*
4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE TDD: B38/B39/B40/B41
3G: WCDMA: B1/B2/B4/B5/B6/B8/B19
2G: GSM: B2/B3/B5/B8
Max RF power
33 dBm±2dB@GSM, 24 dBm+1/-3dB@WCDMA, 23 dBm±2dB@LTE
* May vary on difference models.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 3/10
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC& IC Radiation Exposure Statement
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des
environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre
l’antenne et votre corps.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou,
China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
Safety Information
General
- The router generates radio frequency (RF) power. When using the router, care must be taken on safety issues
related to RF interference as well as regulations of RF equipment.
- Do not use your router in aircraft, hospitals, petrol stations or in places where using cellular products is prohibited.
- Be sure that the router will not be interfering with nearby equipment. For example: pacemakers or medical
equipment. The antenna of the router should be away from computers, office equipment, home appliance, etc.
- An external antenna must be connected to the router for proper operation. Only uses approved antenna with the
router. Please contact authorized distributor on finding an approved antenna.
RF Exposure
- This device meets the official requirements for exposure to radio waves. This device is designed and manufactured
not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies.
- The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF
exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable
limits.
Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open.
Router may be used at this time.
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 4/10
The symbol indicates that the product should not be mixed with general household waste but must be sent to
separate collection facilities for recovery and recycling.
The symbol indicates that the product meets the requirements of the applicable EU directives.
The symbol indicates that the product meets the requirements of the relevant UK legislation.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Technical Support
Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates
made to previous versions.
Date
Firmware Version
Document Version
Change Description
July 28, 2022
5.0.0
1.0.0
Initial release.
Nov. 22, 2022
5.0.0
1.0.1
Added declaration for product.
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 5/10
Overview
The Robustel Industrial Dual SIM Cellular VPN Router (R3000 Lite) is a rugged cellular router offering
state-of-the-art mobile connectivity for machine to machine (M2M) applications. R3000 Lite is a powerful router
developed from RobustOS, a Robustel self-developed and Linux-based operating system which is designed to be
used in Robustel hardware routers.
Package Checklist
Before commencing installation ensure your package has the following components:
Device
3-PIN Terminal
Block
RCMS Card
Quick Start Guide
Card
Mounting Kit
(Optional)
Cellular Antenna
(Optional)
Power Supply
(Optional)
Ethernet Cable
(Optional)
Note: The accessories could be different on specific order.
Panel Layout (May Vary on Different Models)
Top View
Bottom View
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 6/10
Interface Descriptions
1. LED Indicator
Name
Color
Status
Description
RUN
Green
On, fast blinking
(250ms blink time)
Router is powered on (System is initializing)
On, blinking
(500ms blink time)
Router starts operating
Off
Router is powered off
USR-SIM
Green
On, solid
Main Card is being used
On, blinking
Backup card is being used
Off
NO SIM card
USR-NET
Green
On, solid
Network is joined successfully and worked in an optimum one
On, blinking
Network is joined successfully but worked in a lower-level than
standard
Off
Network is not joined or joining
USR-OpenVPN
Green
On, solid
OpenVPN connection is established
Off
OpenVPN connection is not established
USR-IPsec
Green
On, solid
IPsec connection is established
Off
IPsec connection is not established
PPP
Green
On, solid
Link connection is established
Off
Link connection is not established
Green
Three lights are solid green
High signal strength (21-31) is available
Two lights are solid green
Medium signal strength (11-20) is available
One light is solid green
Low signal strength (1-10) is available
Off
No signal
When the network is disconnected, those three signal LEDs are designed as a binary combination code to indicate a series of error
report.
Blinking: 1 Off: 0
bit2 bit1 bit0
0 0 1 AT command failed
0 1 0 no SIM card detected
0 1 1 need to enter the PIN code
1 0 0 need to enter the PUK code
1 0 1 registration failed
1 1 0 module error
1 1 1 not support the module
Note: You can choose the display type of USR LED. For more details, please refer to
RT123_SM_RobustOS Software Manual Service > Advanced > System >System Settings > User LED Type.
2. USB Interface
Feature
Operation
Firmware upgrade
USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving data from slave devices which
connected to it. You can insert a USB storage device into the router’s USB interface, such as a U disk or a hard disk. If there have a
supported configuration file or a router firmware in this USB storage device, the router will automatically update the
configuration file or the firmware. For more details, see RT123_SM_RobustOS Software Manual.
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 7/10
3. PIN Assignment
4. Reset Button
Feature
Operation
Reboot
Press and hold the RST button for 2~ 5 seconds under the operating status.
Restore to default
configuration
Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default
configuration.
Restore to factory
default settings
Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory
default settings.
Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.
5. Ethernet Ports. R3000 Lite Router has one Ethernet port with two LED indicators. The yellow one is link indicator
and the green one is speed indicator. For details about status, see the table below.
Indicator
Status
Description
Link indicator
On, solid
Connection is established
On, blinking
Data is being transferred
Off
Connection is not established
Speed indicator
On, solid
100 Mbps mode
Off
10 Mbps mode
PIN
Debug (232)
RS-232
RS485 (2-Line)
Direction
1
Data+(A)
--
2
RXD
Router → Device
3
TXD
Router ← Device
4
DRXD
Router ← Device
5
GND
GND
GND
6
Data-(B)
--
7
RTS
Router ← Device
8
CTS
Router → Device
9
DTXD
Router → Device
5 4 3 2 1
9 8 7 6
PIN
Polarity
10
Positive
11
Negative
12
GND
10 11 12
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 8/10
Hardware Installation
1. SIM Card Installation. Loosen the screws associated with the cover by using a screwdriver and then find the
SIM card slot. Press the card with finger until you hear a click and then tighten the screws associated with the
cover by using a screwdriver. Put back the cover and tighten the screws associated with the cover by using a
screwdriver.
2. Antenna Installation. Rotate the antenna into the antenna connector accordingly.
3. Mounting Kit installation. (Optional)
· Wall mounting
· DIN rail mounting
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 9/10
4. Power Supply installation. Following to the color of the head, connect the cable marked red to the positive
pole through a terminal block, and connect the yellow one to the negative in the same way.
Note: The range of power voltage is 9 to 36V DC.
5. Connect the Router to a Computer. Connect an Ethernet cable to the port marked ETH at the bottom of the
R3000 Lite, and connect the other end of the cable to your computer.
Robustel R3000 Lite Hardware Manual
RT025_HM_R3000_Lite 10/10
Support: support@robustel.com
Website: www.robustel.com
©2022 Guangzhou Robustel Co.,Ltd.
All rights reserved. Subject to change without notice.
5. After logging in, the home page of the web
interface is displayed, then you can view system
information and perform configuration on the
device.
6. The automatic APN selection is ON by default, if
need to specify your own APN, please go to the
menu Interface->Link Manager->Link
Setting->WWAN Settings to finish the specific
setting.
7. The more configuration details please refer to
RT123_SM_RobustOS Software Manual.
(END)
Login to the Device
1. Connect the router’s Ethernet port to a PC with a
standard Ethernet cable.
2. Before logging in, manually configure the PC with
a static IP address on the same subnet as the
gateway address, click and configure "Use the
following IP address".
3. To enter the gateway's web interface, type
http://192.168.0.1 into the URL field of your
Internet browser.
4. Use login information shown in the product label
when prompted for authentication.
w
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
