LG 84LM960V Le manuel du propriétaire

P/NO : MFL67441745 (1303-REV04)

Printed in Korea

www.lg.com

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it

for future reference.

LM96

**

LM95

**

LM86

**

A-2

TABLE OF CONTENTS

A-3 SETTING UP THE TV

A-3 Attaching the stand

A-8 Tidying cables

B-1 MAKING CONNECTIONS

B-1 Antenna connection

B-2 Satellite connection

B-2 HDMI connection

B-3 - ARC (Audio Return Channel)

B-4 DVI to HDMI connection

B-5 MHL connection

B-6 RGB-PC connection

B-7 Component connection

B-8 Composite connection

B-9 Euro scart connection

B-11 Audio connection

B-11 - Digital optical audio connection

B-13 USB connection

B-14 CI module connection

B-15 Headphone connection

B-18 SPECIFICATIONS

LANGUAGE LIST

English

Français

COMMON

LANGUAGE

COMMON

A-3

SETTING UP THE TV

Image shown may differ from your TV.

Attaching the stand

3

41

Front

Top View

4 EA

M4 x 20

y When attaching the stand to the TV set,

place the screen facing down on a cushioned

table or flat surface to protect the screen

from scratches.

CAUTION

y Make sure that the screws are inserted

correctly and fastened securely. If they are

not fastened securely enough, the TV may

tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

CAUTION

4 EA

M4 x 20

y Remove the stand before installing the TV on

a wall mount by performing the stand

attachment in reverse.

NOTE

47/55LM96

**

Stand base

Stand body

2

Stand rear cover

A-4

SETTING UP THE TV

41

y When attaching the stand to the TV set,

place the screen facing down on a cushioned

table or flat surface to protect the screen

from scratches.

CAUTION

2

4 EA

M4 x 20

y Make sure that the screws are inserted

correctly and fastened securely. If they are

not fastened securely enough, the TV may

tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

CAUTION

y Remove the stand before installing the TV on

a wall mount by performing the stand

attachment in reverse.

NOTE

84LM96

**

Front

6 EA

M5 x 16

Front

Stand base

Stand body

3

A-5

SETTING UP THE TV

1

Front

Top View

4 EA

M4 x 20

3

42/47/55LM86

**

Stand base

Stand body

2

Stand rear cover

4

y When attaching the stand to the TV set,

place the screen facing down on a cushioned

table or flat surface to protect the screen

from scratches.

CAUTION

Wrapping bag

A-6

SETTING UP THE TV

5

4 EA

M4 x 20

y Remove the stand before installing the TV on

a wall mount by performing the stand

attachment in reverse.

NOTE

6

Protection pad

y Make sure that the screws are inserted

correctly and fastened securely. If they are

not fastened securely enough, the TV may

tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

CAUTION

A-7

SETTING UP THE TV

3

41

Front

4 EA

M5 x 35

y When attaching the stand to the TV set,

place the screen facing down on a cushioned

table or flat surface to protect the screen

from scratches.

CAUTION

4 EA

M4 x 20

72LM95

**

Stand base

Stand body

Stand rear cover

Top View

2

y Make sure that the screws are inserted

correctly and fastened securely. If they are

not fastened securely enough, the TV may

tilt forward after being installed.

y Do not use too much force and over tighten

the screws; otherwise screw may be

damaged and not tighten correctly.

CAUTION

y Remove the stand before installing the TV on

a wall mount by performing the stand

attachment in reverse.

NOTE

A-8

SETTING UP THE TV

Tidying cables

1 Gather the cables with the stand rear cover.

47/55LM96

**

, 42/47/55LM86

**

2 Install the cable holder as shown.

Cable holder

3 Gather and bind the cables with the cable

holder.

Stand rear cover

y Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and

damage to the TV may occur.

CAUTION

84LM96

**

1 Gather and bind the cables with the cable

management.

2 Install the cable holder as shown.

Cable holder

3 Gather and bind the cables with the cable

holder.

Cable management

A-9

SETTING UP THE TV

1 Install the cable holder as shown.

72LM95

**

2 Gather and bind the cables with the cable

holder.

3 Pull the cable management on the stand rear

cover and organize cables. Then, put it back.

Cable holder

Cable management

y Do not move the TV by holding the cable

holder, as the cable holders may break, and

injuries and damage to the TV may occur.

CAUTION

www.lg.com

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it

for future reference.

2

ENG

ENGLISH

TABLE OF CONTENTS

y

If you ignore the warning message, you

may be seriously injured or there is a

possibility of accident or death.

y

If you ignore the caution message, you

may be slightly injured or the product may

be damaged.

y

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

WARNING

CAUTION

NOTE

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 SAFETY INSTRUCTIONS

10 Viewing 3D Imaging

12 INSTALLATION PROCEDURE

12 ASSEMBLING AND PREPARING

12 Unpacking

15 Separate purchase

16 Parts and buttons

17 Lifting and moving the TV

18 Mounting on a table

19 Mounting on a wall

21 MAGIC REMOTE CONTROL FUNC-

TIONS

22 Registering magic remote control

22 How to use magic remote control

22 Precautions to take when using the magic

remote control

23 REMOTE CONTROL

24 USING THE USER GUIDE

25 MAINTENANCE

25 Cleaning Your TV

25 - Screen, frame, cabinet and stand

25 - Power cord

25 TROUBLESHOOTING

26 SPECIFICATIONS

3

ENG

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo

are trademarks or registered trademarks of HDMI Licensing LLC in the United States

and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX

video. Visit divx.com for more information and software tools to convert your files into

DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in

order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu.

Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its

subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535

& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and

the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of per-

forming such distribution (such as the cost of media, shipping and handling) upon email request to open-

[email protected]. This offer is valid for three (3) years from the date on which you purchased the product.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and/or remote control in the following environments:

» A location exposed to direct sunlight

» An area with high humidity such as a bathroom

» Near any heat source such as stoves and other devices that produce heat

» Near kitchen counters or humidifiers where they can easily be exposed to steam or

oil

» An area exposed to rain or wind

» Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

y

Do not place the product where it might be exposed to dust.

This may cause a fire hazard.

y

Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.

This plug must remain readily attached and operable when TV is in use.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or

covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

y

Make sure to connect Mains cable to compliant AC mains socket with Grounded

earth pin. (Except for devices which are not grounded on earth.) otherwise

possibility you may be electrocuted or injured.

y

Insert power cable plug completely into wall socket otherwise if not secured

completely into socket, fire ignition may break out.

y

Ensure the power cord does not come into contact with hot objects such as a

heater.

This may cause a fire or an electric shock hazard.

y

Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

y

Bend antenna cable between inside and outside building to prevent rain from

flowing in.

This may cause water damaged inside the Product and could give an electric shock.

5

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

When mounting TV onto wall make sure to neatly install and isolate cabling from

rear of TV as to not create possibility of electric shock /fire hazard.

y

Do not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

y

Do not drop the product or let it fall over when connecting external devices.

Otherwise, this may result in injury or damage to the product.

y

Dispose of used batteries carefully to ensure that a small child does not consume

them.

Please seek Doctor- Medical Attention immediately if child consumes batteries.

y

Do not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

y

Keep the packing anti-moisture material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the

patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause

suffocation. Keep it out of the reach of children.

y

Do not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall Socket while it is connected

to the input terminal on the wall. Additionally, do not touch the power cable right after

plugging into the wall input terminal.

You may be electrocuted.

(Depending on model)

y

Do not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the

inflammable substances.

y

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the

product, or inflammable objects such as paper and matches. Children must pay

particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the

product, unplug the power cord and contact the service centre.

Desiccant

y

Do not allow any impact, shock or any objects to fall into the unit, and do not drop

anything onto the screen.

You may be injured or the product can be damaged.

y

Do not spray water on the product or scrub with an inflammable substance (thinner

or benzene). Fire or electric shock accident can occur.

WARNING

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Unplug the TV from AC mains wall socket if you do not intend to use the TV for a

long period of time.

Accumulated dust can cause fire hazard and insulation deterioration can cause

electric leakage/shock/fire.

y

Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

y

If any of the following occur, unplug the product immediately and contact your local

service centre.

» The product has been impacted by shock

» The product has been damaged

» Foreign objects have entered the product

» The product produced smoke or a strange smell

This may result in fire or electric shock.

y

Do not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

y

Never touch the wall outlet when there is leakage of gas, open the windows and

ventilate.

It may cause a fire or a burn by a spark.

y

Never touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

WARNING

y

Install the product where no radio wave occurs.

y

If you install the TV on a stand, you need to take actions to prevent the product from

overturning. Otherwise, the product may fall over, which may cause injury.

y

Do not install the product on places such as unstable shelves or inclined surfaces.

Also avoid places where there is vibration or where the product cannot be fully

supported.

Otherwise, the product may fall or flip over, which may cause injury or damage to

the product.

y

There should be enough distance between an outside antenna and power lines to

keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

CAUTION

7

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Only use the attachments / accessories specified by the manufacturer.

y

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts)

to the back of the product. When you install the set to use the wall mounting bracket (optional parts),

fix it carefully so as not to drop.

CAUTION

y

Signal from remote control can be interrupted due to external/internal lighting eg

sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.

y

Make sure there are no objects between the remote control and its sensor.

y

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

y

Only use the specified type of battery.

This could cause damage to the remote control.

y

We recommend that you maintain a distance of at least 2 to 7 times the diagonal

screen size when watching TV.

If you watch TV for a long period of time, this may cause blurred vision.

y

When installing the antenna, consult with a qualified service technician. If not

installed by a qualified technician, this may create a fire hazard or an electric shock

hazard.

y

When connecting external devices such as video game consoles, make sure the

connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the

product.

y

Please follow the installation instructions below to prevent the product from

overheating.

» The distance between the product and the wall should be more than 10 cm.

» Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a

cupboard).

» Do not install the product on a carpet or cushion.

» Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Do not turn the product On/Off by plugging-in or unplugging the power plug to the

wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

y

Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight ,

open fireplace and electric heaters.

y Do not place non-rechargeable batteries in charging device.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

CAUTION

y

Take care not to touch the ventilation openings when watching the TV for long

periods as the ventilation openings may become hot. This does not affect the

operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact

replacement part by an authorized servicer.

y

Do not press strongly upon the panel with a hand or sharp object such as nail,

pencil or pen, or make a scratch on it. as it may cause damage to screen.

y

Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the appliance.

y

Prevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

y

Avoid touching the screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary or permanent distortion/damage to screen.

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source

even if you turn off this unit by SWITCH.

y

When cleaning the product and its components, unplug the power first and wipe it

with a soft cloth. Applying excessive force may cause scratches or discolouration.

Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or

industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the

product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation,

corrosion or breakage).

y

When moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

y

When moving the product, make sure you turn the power off first. Then, unplug the

power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or

cause electric shock.

y

When unplugging the cable, grab the plug and unplug it, by pulling at the plug.

Don’t pull at the cord to unplug the power cord from the power board.

As this could be hazards.

9

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

If an image remains still for a while,

the screen may become dim in order

to minimize the power consumption.

The screen gets brighter again when

you operate the remote control or a

different image appears.

(Only 84LM96

**

)

y

Contact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

y

If the product feels cold to the touch, there may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong with product.

y

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

y

You may find different brightness and colour of the panel depending on your viewing

position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with

the product performance, and it is not malfunction.

y

The panel is a high technology display product with resolution of two million to six

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and

does not affect the performance and reliability of the product.

This phenomenon also occurs in third-party products and is not subject to exchange

or refund.

y

Displaying a still image (e.g., broadcasting channel

logo, on-screen menu, scene from a video game) for

a prolonged time may cause damage to the screen,

resulting in retention of the image, which is known as

image sticking. The warranty does not cover the product

for image sticking.

Avoid displaying a fixed image on your television’s screen

for a prolonged period (2 or more hours for LCD, 1 or

more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time,

image sticking may occur on the borders of the panel.

This phenomenon also occurs in third-party products and

is not subject to exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by

plastic thermal contraction due to tempera-ture and humidity. This noise is common for products

where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a large amount of current to operate a

product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

CAUTION

10

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging

Those that have a photosensitive seizure or chronic illness

y

Some users may experience a seizure or other abnormal symptoms when they are exposed to a

flashing light or particular pattern from 3D contents.

y

Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc.

y

3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced.

y

If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have

trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent

breaks than the average adult.

y

If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

y

Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

y

When these symptoms are experienced, stop using/watching 3D contents and get enough rest until

the symptom subsides.

» Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,

dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

Viewing Environment

y

Viewing Time

When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long

period of time may cause headache, dizziness, fatigue or eye strain.

WARNING

La page est en cours de chargement...

LG 84LM960V Le manuel du propriétaire

LG 84LM960V Le manuel du propriétaire

dans d''autres langues

Documents connexes