Hoover I SD 177 Manuel utilisateur

Taper
Manuel utilisateur
USER MANUAL
BI SD 177
LANGUAGES
English
Deutsch
Español
Français
Italiano
Nederlands
Polski
Portuguese
2
39
20
58
77
96
115
134
2
SUMMARY
SAFETY INFORMATION ............................................................................ 3
Scrapping old appliances ................................................................... 10
Conformity ........................................................................................ 10
Guarantee ......................................................................................... 10
Energy Saving .................................................................................... 10
Before first use ...................................................................................... 11
Fridge use .............................................................................................. 11
Storage .............................................................................................. 12
Control panel ......................................................................................... 12
Care and cleaning .................................................................................. 13
Defrosting the fridge ......................................................................... 13
Changing the light ............................................................................. 14
Availability of spare parts .................................................................. 14
Troubleshooting .................................................................................... 14
Technical assistance .............................................................................. 15
Installation preparation ......................................................................... 15
Ventilation ......................................................................................... 16
Installation into the cabinet ................................................................... 17
Mounting the fascia door .................................................................. 18
Reversing the appliance door ................................................................ 19
3
Thank you for purchasing this product.
Before using your refrigerator, please carefully read this instruction manual in order to maximize
its performance. Store all documentation for subsequent use or for other owners. This product is
intended solely for household use or similar applications such as:
- the kitchen area for personnel in shops, offices and other working environments
- on farms, by clientele of hotels, motels and other environments of a residential type
- at bed and breakfasts (B & B)
- for catering services and similar applications not for retail sale.
This appliance must be used only for purposes of storage of food, any other use is considered
dangerous and the manufacturer will not be responsible for any omissions. Also, it is recommended
that you take note of the warranty conditions.
SAFETY INFORMATION
Please read the operating and installation instructions carefully!
They contain important information on how to install, use and maintain the
appliance.
The manufacturer is not liable if you fail to comply with the instructions and
warnings.
Retain all documents for subsequent use or for the next owner.
Do not connect the appliance to the electricity supply
until all packing and transit protectors have been
removed. Keep children away from packaging and its
parts.
Danger of suffocation from folding cartons and plastic
film!
Leave to stand for at least 4 hours before switching
on the product, to allow compressor oil to settle if
transported horizontally.
Make sure there is no transport damage.
Do not damage the refrigerant circuit.
4
Maintain the ventilation openings in the appliance
enclosure or in the built-in structure, free of
obstruction.
Never use water to wash the compressor position,
wipe it with a dry cloth thoroughly after cleaning to
prevent rust.
Handle the appliance always with at least two
persons because it is heavy.
Install and level the appliance in an area suitable for
its size and use.
Make sure that the electrical information on the
rating plate agrees with the power supply. If it does
not, contact an electrician.
The appliance is operated by a 220-240 VAC/50 Hz
power supply. Abnormal voltage fluctuation may
cause the appliance to fail to start, or damage to the
temperature control or compressor, or there may be
an abnormal noise when operating. In such case, an
automatic regulator shall be mounted.
Only for UK: The appliance’s power cable is fitted with
3-cord (grounding) plug that fits a standard 3-cord
(grounded) socket. Never cut off or dismount the
third pin (grounding). After the appliance is installed,
the plug should be accessible.
Make sure that mains cable is not caught under the
appliance during and after carrying/moving the
appliance, to avoid the mains cable becoming cut or
5
damaged. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Do not install the appliance in humid, oily or dusty
places, nor expose it to direct sunlight and to water.
Do not install the appliance near heaters or
inflammable materials.
FOR appliances with a freezer compartment: if there
is a power failure do not open the lid. Frozen food
should not be affected if the failure lasts for less than
the hours indicated on the rating label (Temperature
rise time). If the failure is longer, then the food
should be checked and eaten immediately or cooked
and then refrozen.
If you find that the lid of the appliance is difficult to
open just after you have closed it, don’t worry. This is
due to the pressure difference which will equalize
and allow the lid to be opened normally after a few
minutes.
Do not store medicines, bacteria or chemical agents
in the appliance. This appliance is a household
appliance, it is not recommended to store materials
that require strict temperatures.
Do not excessively pull or fold the power cord or
touch the plug with wet hands.
Do not store products which contain flammable
propellant (e.g. spray cans) or explosive substances in
6
the appliance. Risk of explosion!
Do not place unstable articles (heavy objects,
containers filled with water) on top of the
refrigerator, to ovoid personal injury caused by falling
or electric shock caused by contact with water.
Do not use electrical appliances inside the food
storage compartments, unless they are of the type
recommended by the manufacturer.
Do not touch internal cooling elements, especially
with wet hands, to avoid cracks or injuries.
At risk here are children, people who have limited
physical, mental or sensory abilities, as well as people
who have inadequate knowledge concerning safe
operation of the appliance.
Check that children and vulnerable people have
understood the hazards. A person responsible for
safety must supervise or instruct children and
vulnerable people who are using the appliance. Only
children aged 8 years and above may use the
appliance.
Children should not play with the appliance.
Children aged from 3 to 8 years are allowed to load
and unload this appliance.
FOR appliances with a freezer compartment: do not
store bottled or canned liquids (especially carbonated
drinks) in the freezer compartment. Bottles and cans
may burst!
7
FOR appliances with a freezer compartment: never
put frozen food straight from the freezer
compartment in your mouth. Risk of low-temperature
burns!
Keep plastic parts and the door seal free of oil and
grease. Otherwise, plastic parts and the door seal will
become porous.
Before performing any operation, unplug the power
cord from the power socket.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not use pointed or sharp-edged objects such as
knives or forks to remove the frost.
Never use hairdryers, electrical heaters or other such
electrical appliances for defrosting.
It is recommended to keep the plug clean, any
excessive dust residues on the plug can be the cause
fire.
Do not try to repair, disassemble or modify the
appliance by yourself. In case of repair please contact
always our customer service.
Supervise children while the appliance is being
cleaned or maintained.
Do not clean the cold glass shelves with hot water.
Sudden temperature change may cause the glass to
break.
8
WARNING: The tubes of the refrigeration circuit
convey a small quantity of an environmentally
friendly but flammable refrigerant (R600a) and
insulating gas (cyclopentane). It does not damage the
ozone layer and does not increase the greenhouse
effect. If refrigerant escapes, it may injure your eyes
or ignite.
If the refrigerant circuit should be damaged:
- Switch off the appliance and pull out the mains plug,
- Keep naked flames and/or ignition sources away
from the appliance,
- Thoroughly ventilate the room for several minutes,
- Inform customer service.
WARNING: Do not damage the plug and/or the power
cord; this could cause electrical shocks or fires.
WARNING: Do not use multiple portable socket-
outlets or portable power supplies. We do not
recommend the use of extension leads and multi-way
adapters.
Do not attempt to sit or stand on the top of the
appliance. You could injure yourself or damage it. This
appliance is not designed for stacking with any other
ones.
The product is designed and built for domestic
household use only.
Only original parts supplied by the manufacturer may
be used. The manufacturer guarantees that only
9
these parts satisfy the safety requirements.
Opening the door for long periods can cause a
significant increase of the temperature in the
compartments of the appliance.
- Clean regularly surfaces that can come in contact
with food and accessible drainage systems.
- Clean water tanks if they have not been used for 48h;
flush the water system connected to a water supply if
water has not been drawn for 5 days.
- Store raw meat and fish in suitable containers in the
refrigerator, so that it is not in contact with or drip
onto other food.
- Two-star frozen-food compartments(if they are
presented in the appliance) are suitable for storing
pre-frozen food, storing or making ice-cream and
making ice cubes.
- One-, two- and three -star compartments, if present
in the appliance, are not suitable for the freezing of
fresh food.
- If the appliance is left empty for long periods, switch
off, defrost, clean, dry and leave the door open to
prevent mould developing within the appliance.
FOR Wine Coolers: this appliance is intended to be
used exclusively for the storage of wine
FOR a free standing appliance: this refrigerating
appliance is not intended to be used as a built-in
appliance
FOR appliances without a 4-star compartment: this
10
refrigerating appliance is not suitable for freezing
foodstuffs
Scrapping old appliances
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the
environment) and basic components (which can be re-used). It is important to have WEEE subjected
to specific treatments, in order to remove and dispose properly all pollutants, and recover and
recycle all materials.
Individuals can play an important role in ensuring that WEEE does not become an environmental
issue; it is essential to follow some basic rules:
- WEEE should not be treated as household waste;
- WEEE should be handed over to the relevant collection points managed by the municipality or
by registered companies. In many countries, for large WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who
has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type
and has the same functions as the supplied equipment.
Conformity
By placing the mark on this product, we are confirming compliance to all relevant European
safety, health and environmental requirements which are applicable in legislation for this product.
Guarantee
Minimum guarantee is: 2 years for EU Countries, 3 years for Turkey, 1 year for UK, 1 year for Russia,
3 years for Sweden, 2 years for Serbia, 5 years for Norway, 1 year for Morocco, 6 months for
Algeria, Tunisia no legal warranty required.
Energy Saving
For better energy saving we suggest :
Installing the appliance away from heat sources and not exposed to direct sunlight and in
a well ventilated roo.
Avoid putting hot food into the refrigerator to avoid increasing the internal temperature
and therefore causing continuos functionaliting of the compressor.
Do not excessively stuff foods so as to ensure proper air circulation.
11
Defrost the appliance in case there is ice to facilitate the transfer of cold.
In case of absence of electrical energy, it is advisable to keep the refrigerator door
closed.
Open or keep the doors of the appliance open as little as possible
Avoid adjusting the setting to temperatures too cold.
Remove dust present on the rear of the appliance
For further information about the product, please consult https://eprel.ec.europa.eu/ or scan the
QR on the energy label supplied with the appliance
Before first use
You must allow the fridge to settle for at least four hours prior to switching the power on.
It is recommended that you clean the interior of the appliance prior to first use, using a solution of
bicarbonate of soda and warm water and then thoroughly drying the interior.
The fridge may have an odor to it at first use. This will disappear as the appliance cools.
Please note:
The appliance will start on temperature setting 3 and work continuously until it comes down to the
correct temperature.
If the appliance is switched off, you should allow five minutes before switching it on again to
prevent unnecessary damage to the compressor.
Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance.
This fridge cools your food by making the inside back of the cavity cold. It is normal for frost to
build up on this surface; it then dissipates and drains through a small drain at the bottom, where it
evaporates harmlessly. The presence of frosting at the back is not a malfunction of the fridge.
Fridge use
•Never put liquids in the refrigerator uncovered.
•Never put hot foods in the refrigerator. Warm food should be allowed to cool to room
temperature before being put into the refrigerator.
•Nothing should rest against the rear wall of the refrigerator, as this will cause frost and possible
condensation problems which will be difficult to remove.
•Make sure food is clean and any extra water is wiped away before putting into the fridge.
•Wrap or cover food before putting into the fridge. This will help prevent the loss of moisture,
keep food fresh and avoid unpleasant odors.
•Sort foods prior to storing. Any foods to be used soon should be stored at the front of the shelf to
prevent deterioration caused by the door being open for prolonged periods.
•Do not overfill the fridge. There should be sufficient space between the foods to allow the cool air
to circulate.
•Thawing frozen foods in the fridge compartment will help to keep the temperature low and save
energy.
•Never store raw meats on shelves above cooked meats or other produce. This will help to prevent
juices from raw meat contaminating other foodstuffs.
12
Storage
The fridge is for short term food storage. Although low temperatures can be maintained, extended
periods of food storage is not recommended.
As the cold air circulates within the fridge, the temperature can vary between the different
sections. As such, foods should be stored in different sections according to type. Sections 6 and 7
are the coldest parts of the fridge.
1.Butter, cheeses etc.
2.Food in jars and bottles
3.Drinks, e.g. milk
4.Cooked food
5.Yogurts, preserves etc.
6.75cl bottles or ready meals etc.
7.Fresh meat and fish
8.Fruit and vegetables
The most energy-saving configuration requires drawers, food box and shelves to be positioned in
the product, please refer to the above pictures.
The fridge shelves can be moved according to the storage requirements
within the fridge section. To move the shelf, lift up the rear section and
then pull it outwards. To replace, slide the shelf back into the slot, and
then lower the rear section.
The wine racks can be deployed or withdrawn as desired.
It’s suggested to set the temperature at 4°C in the fridge compartment.
For most food categories, the longest storage time in the fridge compartment is achieved
with colder temperatures. Since some particular products (as fresh fruits and vegetables)
may be damaged with colder temperatures, it is suggested to keep them in the crisper
drawers, whenever present. If not present, maintain an average setting of the thermostat
Control panel
A
B
C
13
A. Refrigerator temperature adjustment sensor
This button is used to adjust the temperature within the fridge. Press this sensor to make
adjustment, and then as many times as necessary until the desired level is selected. The settings
range from 1 to 6 with 1 being the warmest and 6 being the coldest.
Please note: Where possible, avoid having the temperature setting on 6 all of the time. This will
help to alleviate strain on the compressor and refrigeration system.
B. Refrigerator temperature setting display
This display will illuminate the current temperature
setting. Adjusting the temperature will cycle
through this display.
Please note: You do not use numbers 1 to 6 to
change the temperature. Instead, use the
refrigerator temperature adjustment sensor (A).
C. Power button
Press the sensor once to rose up the function, and then press for 3 seconds to switch the appliance
on or off .
This product has power-off or power failure memory function.
Care and cleaning
Always disconnect the appliance from the power supply before any cleaning or maintenance.
The fridge and crisper sections should be cleaned using a solution
of bicarbonate of soda and lukewarm water. Do not use abrasive
products or detergents. After washing, rinse and dry thoroughly.
Clean the shelves, drawers and balconies separately by hand with a mild
solution of washing up liquid and water. Do not put them in the
dishwasher.
The water drain hole at the back of the fridge compartment should be
cleaned periodically to prevent the defrosted water from collecting inside
the fridge compartment. The drain plug can be used to clean the drain
hole.
If the appliance is not to be used for prolonged periods of time, unplug
and clean the appliance. The doors should be left slightly ajar to prevent
the formation of mildew and unpleasant odors.
Defrosting the fridge
The fridge is self-defrosting. Any water created will run out of the fridge through the channel at the
back of the fridge, unless the drain hole is blocked. It is important to keep the channel clear at all
times using the cleaning tool/drain plug supplied. The defrosted water is collected in the
evaporating tray at the back of the appliance and dissipated by evaporation.
Please note: If you are regularly finding pools of water in the fridge, or you notice that the
compressor is always running, then it is likely that the door is not sealing properly. This could be
14
due to a defective door seal or an incorrectly fitted, or overly heavy, decor door. For more
information see the troubleshooting section.
Changing the light
If the LED lighting fails in any way, it should only be replaced by authorized service agents. In the
event of light failure within your fridge please contact Customer Care to arrange a service visit.
Contact details are on the rear cover of this manual.
Availability of spare parts
Thermostats, temperature sensors, printed circuit boards and light sources are available for a
minimum period of seven years after placing the last unit of the model on the market.
Door handles, door hinges, trays and baskets for a minimum period of seven years and door
gaskets for a minimum period of 10 year, after placing the last unit of the model on the
market.
Troubleshooting
If you have any problems with your appliance, you should check the troubleshooting prior to
calling Customer Care.
If the appliance is not working, check:
•That there is power to the appliance.
•The house fuses are intact and the fuse in the plug has not blown.
•The fridge has not been turned off.
•The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the
socket is faulty.
If the appliance is working, but not very well, check:
•The appliance is not overloaded.
•The thermostat is set to an appropriate temperature.
•The doors are closing properly.
•The cooling system at the rear of the appliance is clean and free of dust, and not touching the
rear wall.
•There is enough ventilation at the side and rear walls.
•This can be due to the decor door(s) not being properly fitted, causing the fridge door to not close
properly thus letting warm air in. If you are at all unsure, ask your fitter to check the decor doors.
If the appliance is noisy, check:
•The appliance is level and stable.
•The side and rear walls are clear, and there is nothing resting on the appliance.
•Note: The cooling gas in the refrigerator may make a slight bubbling or gurgling noise, even when
the compressor is not running.
If the appliance is beeping, check:
•That the door is closed. An alarm will sound after 60 seconds of a door being open.
If there’s water in the base of the refrigerator compartment, check:
•The drain hole at the back of the compartment is clear.
15
If ice has formed on the back wall of the fridge:
•It is normal for some ice droplets to form on the back wall of the fridge. This does not constitute a
fault with the appliance.
•Ensure that no items inside the fridge are in contact with the back wall.
•Check that there is some resistance when opening the door of the appliance. If it opens at the
slightest touch it may mean that the door seal needs to be replaced.
•Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve
the issue yourself, contact Customer Care so that the seal can be replaced.
•This can be due to the decor door(s) not being properly fitted. If you are at all unsure, ask your
fitter to check the decor doors.
If the LED unit within the appliance is not working:
•Contact Customer Care to arrange a service visit.
Technical assistance
To contact the technical assistance, visit our website: https://corporate.haier-europe.com/en/
Under the section “website”, choose the brand of your product and your country. You will be
redirected to the specific website where you can find the telephone number and form to contact
the technical assistance
Installation preparation
This appliance must never be installed close to heat sources, e.g. heating elements or cookers,
nor in damp places.
Seek the help of another individual, or two, when installing
this appliance. This appliance may have sharp edges. Wear
adequate PPE for the task and environment.
•To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
•The cooling system at the rear of the appliance must not touch
the rear wall. The greater the gap, the better.
•The appliance must be installed with adequate ventilation.
Ensure that there is clearance above the appliance to allow air
to escape and that there is space between the rear of the
appliance and the wall.
Install the appliance at a location where the ambient
temperature corresponds to the climate class indicated on the
rating plate of the appliance:
- Extended temperate (SN): ‘this refrigerating appliance is
intended to be used at ambient temperatures ranging from 10
°C to 32 °C’
- Temperate (N): ‘this refrigerating appliance is intended to be
used at ambient temperatures ranging from 16 °C to 32 °C’
16
- Subtropical (ST): ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 38 °C’
- Tropical (T): ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 43 °C’
Ventilation
The main consideration when installing any refrigeration unit into a fitted kitchen is ventilation.
The heat removed from the cooling compartment needs to be dissipated into the atmosphere.
Incorrect ventilation can lead to premature compressor failure, excessive power consumption,
total system failure and may invalidate the warranty provided with the appliance. For products
intended to be instaIIed into a taII housing unit, the foIIowing requirements need to be met:
The open channeI at the rear is cIearIy shown. For the correct operation of the appIiance it is
important that the top of the housing unit is not bIocked off. A channeI depth of 40-50mm is
normaI with most units.
A ventiIation hoIe is required in the pIinth of the unit; this aIIows air to be drawn over the
compressor & heat exchange. The required air flow can be achieved by removal of a thin section of
plinth (recommended 600mm x 10mm minimum).
17
As a rule, the more air that can get in and out, the better and more efficient the operation of the
product.
Installation into the cabinet
With the help of another individual, or two, move the appliance
into the cabinet. There are two metal plates at the base of the
appliance. Fit the supplied white spacers (Fig. 8) to these
plates, as per Fig. 9.
Ensure that the lips of the spacers are level with the lip of the cabinet base.
18
Mounting the fascia door
Ensure that there is a gap of 3 to 4mm between the non- hinged side and the cabinet wall.
Locate the slider in the bracket and fix the slider to the fascia door 20 to 22mm from the edge of
the fascia as shown in figure 11, ensuring that the slider is positioned centrally and horizontally
within the bracket. Tighten securely by hand.
Fill the gap on the non-hinged side with the gasket/seal strip provided, as shown in Fig. 12.
The finished look for the door sliders should be similar to those shown in Fig. 14, which shows 2
sliders in place.
Ensure the appliance door opens, closes and seals properly.
Once complete, and if you are happy with the fit of the appliance in the cabinet, bend and snap the
parts of the white spacers marked ‘S’ as shown by the dotted outline in fig. 13. Leave the rest of
the spacer cover in place over the metal plates.
Important: After completing the installation, check that the appliance is secured within the unit
and that the door(s) close and open properly. If there is no resistance from the door seals when
opening the doors, then it is probable that the appliance and/or decor doors are not fitted
properly.
19
Reversing the appliance door
We recommend you seek the help of another individual to support the doors whilst performing
this operation. Always wear adequate PPE (Personal Protective Equipment) for the task at hand.
Prepare a surface with a soft, clean towel or similar where you can place the door during these
steps.
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been reversed. With the door closed,
use a hair dryer to expand the seal and fill the gap between the door and the body of the
appliance.
Take care not to use the hair dryer too close to the appliance, which could damage the seal. A
distance of approximately 10cm should be adequate.
When completed, allow the seal and door to cool before touching them. Once done, the seal
should remain in position.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153

Hoover I SD 177 Manuel utilisateur

Taper
Manuel utilisateur