Hoover I SD 177 Manuel utilisateur

USER MANUAL

BI SD 177

LANGUAGES

English

Deutsch

Español

Français

Italiano

Nederlands

Polski

Portuguese

2

39

20

58

77

96

115

134

2

SUMMARY

SAFETY INFORMATION ............................................................................ 3

Scrapping old appliances ................................................................... 10

Conformity ........................................................................................ 10

Guarantee ......................................................................................... 10

Energy Saving .................................................................................... 10

Before first use ...................................................................................... 11

Fridge use .............................................................................................. 11

Storage .............................................................................................. 12

Control panel ......................................................................................... 12

Care and cleaning .................................................................................. 13

Defrosting the fridge ......................................................................... 13

Changing the light ............................................................................. 14

Availability of spare parts .................................................................. 14

Troubleshooting .................................................................................... 14

Technical assistance .............................................................................. 15

Installation preparation ......................................................................... 15

Ventilation ......................................................................................... 16

Installation into the cabinet ................................................................... 17

Mounting the fascia door .................................................................. 18

Reversing the appliance door ................................................................ 19

3

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instruction manual in order to maximize

its performance. Store all documentation for subsequent use or for other owners. This product is

intended solely for household use or similar applications such as:

- the kitchen area for personnel in shops, offices and other working environments

- on farms, by clientele of hotels, motels and other environments of a residential type

- at bed and breakfasts (B & B)

- for catering services and similar applications not for retail sale.

This appliance must be used only for purposes of storage of food, any other use is considered

dangerous and the manufacturer will not be responsible for any omissions. Also, it is recommended

that you take note of the warranty conditions.

SAFETY INFORMATION

Please read the operating and installation instructions carefully!

They contain important information on how to install, use and maintain the

appliance.

The manufacturer is not liable if you fail to comply with the instructions and

warnings.

Retain all documents for subsequent use or for the next owner.

• Do not connect the appliance to the electricity supply

until all packing and transit protectors have been

removed. Keep children away from packaging and its

parts.

Danger of suffocation from folding cartons and plastic

film!

• Leave to stand for at least 4 hours before switching

on the product, to allow compressor oil to settle if

transported horizontally.

• Make sure there is no transport damage.

• Do not damage the refrigerant circuit.

4

• Maintain the ventilation openings in the appliance

enclosure or in the built-in structure, free of

obstruction.

• Never use water to wash the compressor position,

wipe it with a dry cloth thoroughly after cleaning to

prevent rust.

• Handle the appliance always with at least two

persons because it is heavy.

• Install and level the appliance in an area suitable for

its size and use.

• Make sure that the electrical information on the

rating plate agrees with the power supply. If it does

not, contact an electrician.

• The appliance is operated by a 220-240 VAC/50 Hz

power supply. Abnormal voltage fluctuation may

cause the appliance to fail to start, or damage to the

temperature control or compressor, or there may be

an abnormal noise when operating. In such case, an

automatic regulator shall be mounted.

• Only for UK: The appliance’s power cable is fitted with

3-cord (grounding) plug that fits a standard 3-cord

(grounded) socket. Never cut off or dismount the

third pin (grounding). After the appliance is installed,

the plug should be accessible.

• Make sure that mains cable is not caught under the

appliance during and after carrying/moving the

appliance, to avoid the mains cable becoming cut or

5

damaged. If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or

similarly qualified person in order to avoid a hazard.

• Do not install the appliance in humid, oily or dusty

places, nor expose it to direct sunlight and to water.

• Do not install the appliance near heaters or

inflammable materials.

• FOR appliances with a freezer compartment: if there

is a power failure do not open the lid. Frozen food

should not be affected if the failure lasts for less than

the hours indicated on the rating label (Temperature

rise time). If the failure is longer, then the food

should be checked and eaten immediately or cooked

and then refrozen.

• If you find that the lid of the appliance is difficult to

open just after you have closed it, don’t worry. This is

due to the pressure difference which will equalize

and allow the lid to be opened normally after a few

minutes.

• Do not store medicines, bacteria or chemical agents

in the appliance. This appliance is a household

appliance, it is not recommended to store materials

that require strict temperatures.

• Do not excessively pull or fold the power cord or

touch the plug with wet hands.

• Do not store products which contain flammable

propellant (e.g. spray cans) or explosive substances in

6

the appliance. Risk of explosion!

• Do not place unstable articles (heavy objects,

containers filled with water) on top of the

refrigerator, to ovoid personal injury caused by falling

or electric shock caused by contact with water.

• Do not use electrical appliances inside the food

storage compartments, unless they are of the type

recommended by the manufacturer.

• Do not touch internal cooling elements, especially

with wet hands, to avoid cracks or injuries.

• At risk here are children, people who have limited

physical, mental or sensory abilities, as well as people

who have inadequate knowledge concerning safe

operation of the appliance.

• Check that children and vulnerable people have

understood the hazards. A person responsible for

safety must supervise or instruct children and

vulnerable people who are using the appliance. Only

children aged 8 years and above may use the

appliance.

• Children should not play with the appliance.

• Children aged from 3 to 8 years are allowed to load

and unload this appliance.

• FOR appliances with a freezer compartment: do not

store bottled or canned liquids (especially carbonated

drinks) in the freezer compartment. Bottles and cans

may burst!

7

• FOR appliances with a freezer compartment: never

put frozen food straight from the freezer

compartment in your mouth. Risk of low-temperature

burns!

• Keep plastic parts and the door seal free of oil and

grease. Otherwise, plastic parts and the door seal will

become porous.

• Before performing any operation, unplug the power

cord from the power socket.

• Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not use pointed or sharp-edged objects such as

knives or forks to remove the frost.

• Never use hairdryers, electrical heaters or other such

electrical appliances for defrosting.

• It is recommended to keep the plug clean, any

excessive dust residues on the plug can be the cause

fire.

• Do not try to repair, disassemble or modify the

appliance by yourself. In case of repair please contact

always our customer service.

• Supervise children while the appliance is being

cleaned or maintained.

• Do not clean the cold glass shelves with hot water.

Sudden temperature change may cause the glass to

break.

8

• WARNING: The tubes of the refrigeration circuit

convey a small quantity of an environmentally

friendly but flammable refrigerant (R600a) and

insulating gas (cyclopentane). It does not damage the

ozone layer and does not increase the greenhouse

effect. If refrigerant escapes, it may injure your eyes

or ignite.

• If the refrigerant circuit should be damaged:

- Switch off the appliance and pull out the mains plug,

- Keep naked flames and/or ignition sources away

from the appliance,

- Thoroughly ventilate the room for several minutes,

- Inform customer service.

• WARNING: Do not damage the plug and/or the power

cord; this could cause electrical shocks or fires.

• WARNING: Do not use multiple portable socket-

outlets or portable power supplies. We do not

recommend the use of extension leads and multi-way

adapters.

• Do not attempt to sit or stand on the top of the

appliance. You could injure yourself or damage it. This

appliance is not designed for stacking with any other

ones.

• The product is designed and built for domestic

household use only.

• Only original parts supplied by the manufacturer may

be used. The manufacturer guarantees that only

9

these parts satisfy the safety requirements.

• Opening the door for long periods can cause a

significant increase of the temperature in the

compartments of the appliance.

- Clean regularly surfaces that can come in contact

with food and accessible drainage systems.

- Clean water tanks if they have not been used for 48h;

flush the water system connected to a water supply if

water has not been drawn for 5 days.

- Store raw meat and fish in suitable containers in the

refrigerator, so that it is not in contact with or drip

onto other food.

- Two-star frozen-food compartments(if they are

presented in the appliance) are suitable for storing

pre-frozen food, storing or making ice-cream and

making ice cubes.

- One-, two- and three -star compartments, if present

in the appliance, are not suitable for the freezing of

fresh food.

- If the appliance is left empty for long periods, switch

off, defrost, clean, dry and leave the door open to

prevent mould developing within the appliance.

• FOR Wine Coolers: this appliance is intended to be

used exclusively for the storage of wine

• FOR a free standing appliance: this refrigerating

appliance is not intended to be used as a built-in

appliance

• FOR appliances without a 4-star compartment: this

10

refrigerating appliance is not suitable for freezing

foodstuffs

Scrapping old appliances

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and

Electronic Equipment (WEEE).

WEEE contains both polluting substances (which can cause negative consequences for the

environment) and basic components (which can be re-used). It is important to have WEEE subjected

to specific treatments, in order to remove and dispose properly all pollutants, and recover and

recycle all materials.

Individuals can play an important role in ensuring that WEEE does not become an environmental

issue; it is essential to follow some basic rules:

- WEEE should not be treated as household waste;

- WEEE should be handed over to the relevant collection points managed by the municipality or

by registered companies. In many countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who

has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type

and has the same functions as the supplied equipment.

Conformity

By placing the mark on this product, we are confirming compliance to all relevant European

safety, health and environmental requirements which are applicable in legislation for this product.

Guarantee

Minimum guarantee is: 2 years for EU Countries, 3 years for Turkey, 1 year for UK, 1 year for Russia,

3 years for Sweden, 2 years for Serbia, 5 years for Norway, 1 year for Morocco, 6 months for

Algeria, Tunisia no legal warranty required.

Energy Saving

For better energy saving we suggest :

• Installing the appliance away from heat sources and not exposed to direct sunlight and in

a well ventilated roo.

• Avoid putting hot food into the refrigerator to avoid increasing the internal temperature

and therefore causing continuos functionaliting of the compressor.

• Do not excessively stuff foods so as to ensure proper air circulation.

11

• Defrost the appliance in case there is ice to facilitate the transfer of cold.

• In case of absence of electrical energy, it is advisable to keep the refrigerator door

closed.

• Open or keep the doors of the appliance open as little as possible

• Avoid adjusting the setting to temperatures too cold.

• Remove dust present on the rear of the appliance

For further information about the product, please consult https://eprel.ec.europa.eu/ or scan the

QR on the energy label supplied with the appliance

Before first use

You must allow the fridge to settle for at least four hours prior to switching the power on.

It is recommended that you clean the interior of the appliance prior to first use, using a solution of

bicarbonate of soda and warm water and then thoroughly drying the interior.

The fridge may have an odor to it at first use. This will disappear as the appliance cools.

Please note:

The appliance will start on temperature setting 3 and work continuously until it comes down to the

correct temperature.

If the appliance is switched off, you should allow five minutes before switching it on again to

prevent unnecessary damage to the compressor.

Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance.

This fridge cools your food by making the inside back of the cavity cold. It is normal for frost to

build up on this surface; it then dissipates and drains through a small drain at the bottom, where it

evaporates harmlessly. The presence of frosting at the back is not a malfunction of the fridge.

Fridge use

•Never put liquids in the refrigerator uncovered.

•Never put hot foods in the refrigerator. Warm food should be allowed to cool to room

temperature before being put into the refrigerator.

•Nothing should rest against the rear wall of the refrigerator, as this will cause frost and possible

condensation problems which will be difficult to remove.

•Make sure food is clean and any extra water is wiped away before putting into the fridge.

•Wrap or cover food before putting into the fridge. This will help prevent the loss of moisture,

keep food fresh and avoid unpleasant odors.

•Sort foods prior to storing. Any foods to be used soon should be stored at the front of the shelf to

prevent deterioration caused by the door being open for prolonged periods.

•Do not overfill the fridge. There should be sufficient space between the foods to allow the cool air

to circulate.

•Thawing frozen foods in the fridge compartment will help to keep the temperature low and save

energy.

•Never store raw meats on shelves above cooked meats or other produce. This will help to prevent

juices from raw meat contaminating other foodstuffs.

12

Storage

The fridge is for short term food storage. Although low temperatures can be maintained, extended

periods of food storage is not recommended.

As the cold air circulates within the fridge, the temperature can vary between the different

sections. As such, foods should be stored in different sections according to type. Sections 6 and 7

are the coldest parts of the fridge.

1.Butter, cheeses etc.

2.Food in jars and bottles

3.Drinks, e.g. milk

4.Cooked food

5.Yogurts, preserves etc.

6.75cl bottles or ready meals etc.

7.Fresh meat and fish

8.Fruit and vegetables

The most energy-saving configuration requires drawers, food box and shelves to be positioned in

the product, please refer to the above pictures.

The fridge shelves can be moved according to the storage requirements

within the fridge section. To move the shelf, lift up the rear section and

then pull it outwards. To replace, slide the shelf back into the slot, and

then lower the rear section.

The wine racks can be deployed or withdrawn as desired.

• It’s suggested to set the temperature at 4°C in the fridge compartment.

• For most food categories, the longest storage time in the fridge compartment is achieved

with colder temperatures. Since some particular products (as fresh fruits and vegetables)

may be damaged with colder temperatures, it is suggested to keep them in the crisper

drawers, whenever present. If not present, maintain an average setting of the thermostat

Control panel

A

B

C

13

A. Refrigerator temperature adjustment sensor

This button is used to adjust the temperature within the fridge. Press this sensor to make

adjustment, and then as many times as necessary until the desired level is selected. The settings

range from 1 to 6 with 1 being the warmest and 6 being the coldest.

Please note: Where possible, avoid having the temperature setting on 6 all of the time. This will

help to alleviate strain on the compressor and refrigeration system.

B. Refrigerator temperature setting display

This display will illuminate the current temperature

setting. Adjusting the temperature will cycle

through this display.

Please note: You do not use numbers 1 to 6 to

change the temperature. Instead, use the

refrigerator temperature adjustment sensor (A).

C. Power button

Press the sensor once to rose up the function, and then press for 3 seconds to switch the appliance

on or off .

This product has power-off or power failure memory function.

Care and cleaning

Always disconnect the appliance from the power supply before any cleaning or maintenance.

The fridge and crisper sections should be cleaned using a solution

of bicarbonate of soda and lukewarm water. Do not use abrasive

products or detergents. After washing, rinse and dry thoroughly.

Clean the shelves, drawers and balconies separately by hand with a mild

solution of washing up liquid and water. Do not put them in the

dishwasher.

The water drain hole at the back of the fridge compartment should be

cleaned periodically to prevent the defrosted water from collecting inside

the fridge compartment. The drain plug can be used to clean the drain

hole.

If the appliance is not to be used for prolonged periods of time, unplug

and clean the appliance. The doors should be left slightly ajar to prevent

the formation of mildew and unpleasant odors.

Defrosting the fridge

The fridge is self-defrosting. Any water created will run out of the fridge through the channel at the

back of the fridge, unless the drain hole is blocked. It is important to keep the channel clear at all

times using the cleaning tool/drain plug supplied. The defrosted water is collected in the

evaporating tray at the back of the appliance and dissipated by evaporation.

Please note: If you are regularly finding pools of water in the fridge, or you notice that the

compressor is always running, then it is likely that the door is not sealing properly. This could be

14

due to a defective door seal or an incorrectly fitted, or overly heavy, decor door. For more

information see the troubleshooting section.

Changing the light

If the LED lighting fails in any way, it should only be replaced by authorized service agents. In the

event of light failure within your fridge please contact Customer Care to arrange a service visit.

Contact details are on the rear cover of this manual.

Availability of spare parts

• Thermostats, temperature sensors, printed circuit boards and light sources are available for a

minimum period of seven years after placing the last unit of the model on the market.

• Door handles, door hinges, trays and baskets for a minimum period of seven years and door

gaskets for a minimum period of 10 year, after placing the last unit of the model on the

market.

Troubleshooting

If you have any problems with your appliance, you should check the troubleshooting prior to

calling Customer Care.

If the appliance is not working, check:

•That there is power to the appliance.

•The house fuses are intact and the fuse in the plug has not blown.

•The fridge has not been turned off.

•The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the

socket is faulty.

If the appliance is working, but not very well, check:

•The appliance is not overloaded.

•The thermostat is set to an appropriate temperature.

•The doors are closing properly.

•The cooling system at the rear of the appliance is clean and free of dust, and not touching the

rear wall.

•There is enough ventilation at the side and rear walls.

•This can be due to the decor door(s) not being properly fitted, causing the fridge door to not close

properly thus letting warm air in. If you are at all unsure, ask your fitter to check the decor doors.

If the appliance is noisy, check:

•The appliance is level and stable.

•The side and rear walls are clear, and there is nothing resting on the appliance.

•Note: The cooling gas in the refrigerator may make a slight bubbling or gurgling noise, even when

the compressor is not running.

If the appliance is beeping, check:

•That the door is closed. An alarm will sound after 60 seconds of a door being open.

If there’s water in the base of the refrigerator compartment, check:

•The drain hole at the back of the compartment is clear.

15

If ice has formed on the back wall of the fridge:

•It is normal for some ice droplets to form on the back wall of the fridge. This does not constitute a

fault with the appliance.

•Ensure that no items inside the fridge are in contact with the back wall.

•Check that there is some resistance when opening the door of the appliance. If it opens at the

slightest touch it may mean that the door seal needs to be replaced.

•Check the door seal for any kinks, debris or damage. If you notice any, and are unable to resolve

the issue yourself, contact Customer Care so that the seal can be replaced.

•This can be due to the decor door(s) not being properly fitted. If you are at all unsure, ask your

fitter to check the decor doors.

If the LED unit within the appliance is not working:

•Contact Customer Care to arrange a service visit.

Technical assistance

To contact the technical assistance, visit our website: https://corporate.haier-europe.com/en/

Under the section “website”, choose the brand of your product and your country. You will be

redirected to the specific website where you can find the telephone number and form to contact

the technical assistance

Installation preparation

This appliance must never be installed close to heat sources, e.g. heating elements or cookers,

nor in damp places.

Seek the help of another individual, or two, when installing

this appliance. This appliance may have sharp edges. Wear

adequate PPE for the task and environment.

•To ensure the appliance is level, you should use the height

adjustable feet at the front of the appliance.

•The cooling system at the rear of the appliance must not touch

the rear wall. The greater the gap, the better.

•The appliance must be installed with adequate ventilation.

Ensure that there is clearance above the appliance to allow air

to escape and that there is space between the rear of the

appliance and the wall.

Install the appliance at a location where the ambient

temperature corresponds to the climate class indicated on the

rating plate of the appliance:

- Extended temperate (SN): ‘this refrigerating appliance is

intended to be used at ambient temperatures ranging from 10

°C to 32 °C’

- Temperate (N): ‘this refrigerating appliance is intended to be

used at ambient temperatures ranging from 16 °C to 32 °C’

16

- Subtropical (ST): ‘this refrigerating appliance is intended to be used at ambient temperatures

ranging from 16 °C to 38 °C’

- Tropical (T): ‘this refrigerating appliance is intended to be used at ambient temperatures

ranging from 16 °C to 43 °C’

Ventilation

The main consideration when installing any refrigeration unit into a fitted kitchen is ventilation.

The heat removed from the cooling compartment needs to be dissipated into the atmosphere.

Incorrect ventilation can lead to premature compressor failure, excessive power consumption,

total system failure and may invalidate the warranty provided with the appliance. For products

intended to be instaIIed into a taII housing unit, the foIIowing requirements need to be met:

The open channeI at the rear is cIearIy shown. For the correct operation of the appIiance it is

important that the top of the housing unit is not bIocked off. A channeI depth of 40-50mm is

normaI with most units.

A ventiIation hoIe is required in the pIinth of the unit; this aIIows air to be drawn over the

compressor & heat exchange. The required air flow can be achieved by removal of a thin section of

plinth (recommended 600mm x 10mm minimum).

17

As a rule, the more air that can get in and out, the better and more efficient the operation of the

product.

Installation into the cabinet

With the help of another individual, or two, move the appliance

into the cabinet. There are two metal plates at the base of the

appliance. Fit the supplied white spacers (Fig. 8) to these

plates, as per Fig. 9.

Ensure that the lips of the spacers are level with the lip of the cabinet base.

18

Mounting the fascia door

• Ensure that there is a gap of 3 to 4mm between the non- hinged side and the cabinet wall.

• Locate the slider in the bracket and fix the slider to the fascia door 20 to 22mm from the edge of

the fascia as shown in figure 11, ensuring that the slider is positioned centrally and horizontally

within the bracket. Tighten securely by hand.

• Fill the gap on the non-hinged side with the gasket/seal strip provided, as shown in Fig. 12.

• The finished look for the door sliders should be similar to those shown in Fig. 14, which shows 2

sliders in place.

• Ensure the appliance door opens, closes and seals properly.

Once complete, and if you are happy with the fit of the appliance in the cabinet, bend and snap the

parts of the white spacers marked ‘S’ as shown by the dotted outline in fig. 13. Leave the rest of

the spacer cover in place over the metal plates.

Important: After completing the installation, check that the appliance is secured within the unit

and that the door(s) close and open properly. If there is no resistance from the door seals when

opening the doors, then it is probable that the appliance and/or decor doors are not fitted

properly.

19

Reversing the appliance door

We recommend you seek the help of another individual to support the doors whilst performing

this operation. Always wear adequate PPE (Personal Protective Equipment) for the task at hand.

Prepare a surface with a soft, clean towel or similar where you can place the door during these

steps.

Ensuring the door seals correctly:

It is normal for the seal to be compressed after the door has been reversed. With the door closed,

use a hair dryer to expand the seal and fill the gap between the door and the body of the

appliance.

Take care not to use the hair dryer too close to the appliance, which could damage the seal. A

distance of approximately 10cm should be adequate.

When completed, allow the seal and door to cool before touching them. Once done, the seal

should remain in position.

La page charge ...

Hoover I SD 177 Manuel utilisateur

Hoover I SD 177 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents