5019 100 75066/A
DDLR 3790
1.
Control panel.
2.
Grease filter.
3.
Grease filter handles.
4.
Halogen bulb.
5.
Telescopic flue.
CLEANING THE GREASE FILTER
Wash the grease filter once a month, or
whenever the grease filter saturation indicator
flashes (Extractor speed indicator
2
).
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters (
Fig. 1 - a, b, c
).
3.
After cleaning the grease filters refit in
reverse order, making sure the entire
extraction surface is covered.
Resetting the grease filter saturation
indicator:
press the extractor OFF button for
three seconds. The grease filter saturation
indicator will stop flashing.
REPLACING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Unscrew the lighting unit (
Fig. 2 - d
).
3.
Remove the burn-out bulb and insert a new
one
(
Fig. 2 - e
). Use only 20W max halogen
bulbs.
4.
Screw the lighting unit back in place.
FITTING OR RENEWING THE CARBON
FILTER
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters (
Fig. 1 - a, b, c
).
3.
Fit the carbon filter, fixing it with the two
screws supplied (
Fig. 3 - f).
4.
If the filter needs renewing, remove the old
filter and fit a new one.
5.
Remount the grease filters.
CONTROL PANEL
1.
Speed decrease control -
5
Ö
1
.
2.
Extraction OFF indicator.
3.
Extraction ON speed increase button -
0
Ö
5
.
4.
Extraction speed indicator
1
.
5.
Extraction speed indicator
2
and grease filter
saturation indicator (when flashing).
6.
Extraction speed indicator
3
.
7.
Extraction speed indicator
4
.
8.
Extraction speed indicator
5
.
9. Intensive
extraction speed indicator.
10.
Timer intensive speed button
The hood operates at this speed for 5
minutes and then returns to the previous
settings.
This function can be cancelled by pressing
button
1
,
2
or
3
.
11.
ON-OFF light switch.
5
3
1
4
4
2
2
a
b
2
3
3
c
Fig. 1
1
2
3
45678 9
10 11
Fig. 3
Fig. 2
e
d
f
f
F NL E PGBD GRI
PRODUCT DESCRIPTION SHEET
75066a.fm5 Page 4 Tuesday, February 29, 2000 12:19 PM