Sony CDXGT620U Manuel utilisateur

CDX-GT620U

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

3-275-494-22 (1)

GB

DE

FR

IT

NL

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01GB+00COV-

EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

To cancel the demonstration (DEMO) display, see page 14.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 14 nach.

Pour annuler la démonstration (DEMO), reportez-vous à la page 14.

Per annullare la dimostrazione (DEMO), vedere pagina 14.

Om de demonstratie (DEMO) te annuleren, zie pagina 14.

©

2007 Sony Corporation

FM

/

MW

/

LW

Compact Disc Player

2

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US01INT-

EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

“ATRAC”, “ATRAC AD”, SonicStage and their

logos are trademarks of Sony Corporation.

“WALKMAN” and “WALKMAN” logo are

registered trademarks of Sony Corporation.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku Tokyo,

108-0075 Japan.

The Authorized Representative for EMC and

product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 14).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. By ensuring these batteries are

disposed of correctly, you will help prevent potentially

negative consequences for the environment and human

health which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources. In case

of products that for safety, performance or data integrity

reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will

be treated properly, hand over the product at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment. For all other batteries,

please view the section on how to remove the battery from

the product safely. Hand the battery over to the applicable

collection point for the recycling of waste batteries. For

more detailed information about recycling of this product

or battery, please contact your local Civic Office, your

household waste disposal service or the shop where you

purchased the product.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

3

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US+00COV-

EURTOC.fm

masterpage:Right

Table of Contents

CDX-GT620U

3-275-494-22 (1)

Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the card remote commander . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 5

Attaching the front panel . . . . . . . . . . . . . . . 5

Inserting the disc in the unit . . . . . . . . . . . . . . . 5

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Card remote commander RM-X151 . . . . . . . 6

Searching for a track

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . . 8

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . . 9

Repeat and shuffle play. . . . . . . . . . . . . . . . . 9

Radio

Storing and receiving stations . . . . . . . . . . . . . . 9

Storing automatically — BTM . . . . . . . . . . . 9

Storing manually. . . . . . . . . . . . . . . . . . . . . . 9

Receiving the stored stations . . . . . . . . . . . . 9

Tuning automatically . . . . . . . . . . . . . . . . . . 9

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting AF and TA . . . . . . . . . . . . . . . . . . . 10

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 11

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 11

USB devices

USB device playback . . . . . . . . . . . . . . . . . 11

Display items . . . . . . . . . . . . . . . . . . . . . . . 12

Listening to music on a Mass Storage

Class type audio device. . . . . . . . . . . . . . . . 12

Listening to music on a “Walkman”

(ATRAC Audio Device). . . . . . . . . . . . . . . 12

Other functions

Changing the sound settings . . . . . . . . . . . . . . 13

Adjusting the sound characteristics . . . . . . 13

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Adjusting setup items — SET . . . . . . . . . . . . 13

Using optional equipment. . . . . . . . . . . . . . . . 14

Auxiliary audio equipment. . . . . . . . . . . . . 14

Rotary commander RM-X4S . . . . . . . . . . . 15

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 16

About USB devices . . . . . . . . . . . . . . . . . . 17

Playback order of MP3/WMA/AAC files

(CD-R/RW or Mass Storage Class) . . . . . . 17

About MP3 files . . . . . . . . . . . . . . . . . . . . . 17

About WMA files. . . . . . . . . . . . . . . . . . . . 17

About AAC files . . . . . . . . . . . . . . . . . . . . 17

About ATRAC files . . . . . . . . . . . . . . . . . . 17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 20

Error displays/Messages. . . . . . . . . . . . . . . 22

4

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT) and CD-R/CD-RW (MP3/WMA/AAC

files (page 17)).

• Radio reception

– You can store up to 6 stations per band (FM1,

FM2, FM3, MW and LW).

– BTM (Best Tuning Memory): The unit selects

strong signal stations and stores them.

• RDS services

You can use FM station with Radio Data

System (RDS).

• Search function

Quick-BrowZer: You can quickly and easily

search for a track in a CD, or USB device

connected to this unit (page 8).

• Sound adjustment

– EQ3 stage2: You can choose any one of 7

preset equalizer curves.

– DSO (Dynamic Soundstage Organizer):

Creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

– Digital Music Plus (DM+): Improves

digitally compressed sound, such as MP3.

• Optional device operation

USB device: A Mass Storage Class USB

device or “Walkman” (ATRAC Audio Device)

can be connected to the front USB terminal.

For details on usable devices, please refer to

About USB devices (page 17) or the Sony

support website (page 22).

• Auxiliary equipment connection

An AUX input jack on the front of the unit

allows connection of a portable audio device.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Preparing the card remote

commander

Before using the card remote commander for the

first time, remove the insulation film.

Tip

For how to replace the battery, see “Replacing the

lithium battery of the card remote commander” on

page 18.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the control dial to set the hour

and minute.

To move the digital indication, press (SEEK)

–/+.

5 Press the select button.

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

RESET

button

5

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

Tip

You can set the clock automatically with the RDS

feature (page 11).

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press (OPEN).

The front panel is flipped down.

3 Slide the front panel to the right, then

gently pull out the left end of the front

panel.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Inserting the disc in the unit

1 Press ( OPEN).

2 Insert the disc (label side up).

3 Close the front panel.

Playback starts automatically.

Ejecting the disc

1 Press ( OPEN).

2 Press Z.

The disc is ejected.

3 Close the front panel.

1

2

A

B

c

6

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Location of controls and basic operations

Main unit

Front panel removed

Card remote commander

RM-X151

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

For USB device operation, see “USB devices” on

page 11.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A OFF button

To power off; stop the source.

B (BROWSE) button page 8

To enter the Quick-BrowZer mode.

C Control dial/select button page 8, 13

To adjust volume (rotate); select items (press

and rotate).

D SOURCE button

To power on; change the source (Radio/CD/

USB/AUX).

E Display window

OPEN

SEEK SEEK

PAUSE SCRL

REP SHUF DM

PUSH ENTER

/

SELECT

MODE

SOURCE

DSPL

123456

PTY

AF/TA

OFF

AUX

BROWSE

BACK

ALBUM

1

q; qa8

32

qs9 qf qgqd

5674

RESET

qj qkqh

OFF

DSPL

SCRL

SEL

SOURCE

MODE

132

465

ATT

VOL

+

–

+

–

4

wd

qa

1

wg

ql

w;

ws

wa

wh

wf

7

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

F USB terminal page 11

To connect to the USB device.

G OPEN button page 5

H (BACK) button page 8

To return to the previous display.

I Receptor for the card remote

commander

J SEEK –/+ buttons

CD/USB:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

K MODE button page 9, 12

To select the radio band (FM/MW/LW);

select the play mode of ATRAC Audio

Device.

L AF (Alternative Frequencies)/

TA (Traffic Announcement)/

PTY (Program Type) button page 10,

11

To set AF and TA (press); select PTY (press

and hold) in RDS.

M Number buttons

CD/USB:

(1)/(2): ALBUM –/+

To skip albums (press); skip albums

continuously (press and hold).

(3): REP page 9

(4): SHUF page 9

(5): DM+ page 4

To activate the DM+ function, set

“DM+-ON.” To cancel, set “DM+-

OFF.”

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

N DSPL (display)/SCRL (scroll) button

page 9, 10

To change display items (press); scroll the

display item (press and hold).

O AUX input jack page 14

To connect a portable audio device.

P RESET button page 4

Q Z (eject) button page 5

To eject the disc.

R Disc slot page 5

To insert the disc.

The following buttons on the card remote

commander have also different buttons/functions

from the unit. Remove the insulation film before

use (page 4).

ql < (.)/, (>) buttons

To control CD/radio/USB, the same as

(SEEK) –/+ on the unit.

Setup, sound setting, etc., can be operated by

<

,.

w; DSPL (display) button

To change display items.

wa VOL (volume) +/– button

To adjust volume.

ws ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

wd SEL (select) button

The same as the select button on the unit.

During the Quick-BrowZer mode, (SEL)

(select) is inactive.

wf M (+)/m (–) buttons

To control CD/USB, the same as (1)/(2)

(ALBUM –/+) on the unit.

Setup, sound setting, etc., can be operated by

M m.

wg SCRL (scroll) button

To scroll the display item.

wh Number buttons

To receive stored stations (press); store

stations (press and hold).

Notes

• When ejecting/inserting a disc, keep any USB

devices disconnected to avoid damage to the disc.

• If the unit is turned off and the display disappears, it

cannot be operated with the card remote

commander unless (SOURCE) on the unit is

pressed, or a disc is inserted to activate the unit first.

8

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Searching for a track — Quick-BrowZer

You can search for a track in a CD or USB device (“Walkman”/Mass Storage Class) easily by category.

1 Press (BROWSE).

The unit enters the Quick-BrowZer mode, and the list of search categories appears.

Display items differ, depending on the type of device or disc.

2 Rotate the control dial to select the desired search category, then press it to confirm.

3 Repeat step 2 until the desired track is selected.

Playback starts.

To return to the previous display

Press (BACK).

To exit the Quick-BrowZer mode

Press (BROWSE).

Notes

• When entering the Quick-BrowZer mode, the repeat/shuffle setting is canceled.

• Depending on the USB device, display items may not appear correctly.

• Depending on the USB device, no sound may output during the Quick-BrowZer mode.

SEEK SEEK

PUSH ENTER

/

SELECT

MODE

SOURCE

OFF

BROWSE

BACK

Control dial:

To select the item (rotate); confirm the item (press).

(BACK):

To return to the previous display.

(BROWSE):

To enter/exit the Quick-BrowZer mode.

9

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

CD

Display items

A Source

B Track number/Elapsed playing time, Disc/

artist name, Album number*, Album name,

Track name, Text information, Clock

* Album number is displayed only when the album is

changed.

To change display items B, press (DSPL).

Tip

Displayed items will differ, depending on the disc type,

recording format and settings. For details on MP3/

WMA/AAC, see page 17.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the select button.

The setup display appears.

3 Press the select button repeatedly

until “BTM” appears.

4 Press ( SEEK) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is

also stored (page 10).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) –/+

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) –/+ to locate the

approximate frequency, then press (SEEK) –/+

repeatedly to fine adjust to the desired frequency

(manual tuning).

Select To play

TRACK track repeatedly.

ALBUM* album repeatedly.

SHUF ALBUM* album in random order.

SHUF DISC disc in random order.

10

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A Radio band, Function

B TA/TP*

1

C Frequency*

2

(Program service name), Preset

number, Clock, RDS data

*1 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

*2 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

To change display items C, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (page 14).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

11

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press and hold (AF/TA) (PTY) during

FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (AF/TA) (PTY) repeatedly until

the desired program type appears.

3 Press (SEEK) –/+.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 13).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

USB devices

USB device playback

1 Open the USB cover.

2 Connect the USB device to the USB

terminal.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Notes

• Before removing a USB device, be sure to stop

playback first. If you remove your USB device during

playback, data in the USB device may be damaged.

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP M (Popular Music),

ROCK M (Rock Music), EASY M (Easy

Listening), LIGHT M (Light Classical),

CLASSICS (Classical), OTHER M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL A (Social Affairs),

RELIGION (Religion), PHONE IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION M (National Music), OLDIES (Oldies

Music), FOLK M (Folk Music), DOCUMENT

(Documentary)

12

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Display items

A ATRAC Audio Device: AAD

Mass Storage Class: USB

B Track/Album/Artist/Playlist/Genre number,

Track/Album/Artist/Playlist/Genre name,

Elapsed playing time, Clock

To change display items B, press (DSPL).

Tip

Displayed items will differ, depending on the recorded

format and settings. For details on MP3/WMA/AAC/

ATRAC, see page 17.

Note

The display differs depending on the Mass Storage

Class type USB device, and ATRAC Audio Device.

Listening to music on a Mass

Storage Class type audio device

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

To return to normal play mode, select “ OFF”

or “SHUF OFF”.

Listening to music on a “Walkman”

(ATRAC Audio Device)

1 During playback, press (MODE)

repeatedly until the desired setting

appears.

The item changes as follows:

ALBUM t TRACK t GENRE t

PLAYLIST t ARTIST

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

To return to normal play mode, select “ OFF”

or “SHUF OFF. ”

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

SHUF ALBUM album in random order.

SHUF DEVICE device in random order.

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

ARTIST artist repeatedly.

PLAYLIST playlist repeatedly.

GENRE genre repeatedly.

SHUF ALBUM album in random order.

SHUF ARTIST artist in random order.

SHUF PLAYLIST playlist in random order.

SHUF GENRE genre in random order.

SHUF DEVICE device in random order.

13

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the control dial to adjust the

selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the control dial to select

“CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

EQ3

To select an equalizer type: “XPLOD,”

“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”

“GRAVITY,” “CUSTOM” or “OFF (

z).”

DSO

To select the DSO mode: “1,” “2,” “3” or “OFF

(

z).” The larger the number, the more enhanced

the effect.

LOW*

1

, MID*

1

, HI*

1

(page 13)

To customize the equalizer curve.

BAL (Balance)

To adjust the balance between the right and left

speakers: “RIGHT-10” – “CENTER” (

z) –

“LEFT-10”

FAD (Fader)

To adjust the balance between the front and rear

speakers: “FRONT-10” – “CENTER” (

z) –

“REAR-10”

SUB (Subwoofer volume)

To adjust the subwoofer volume: “+10 dB” –

“0 dB” (

z) – “–10 dB”

(“ATT” is displayed at the lowest setting.)

AUX*

2

(AUX level)

To adjust the volume level for each connected

auxiliary equipment. This setting negates the

need to adjust the volume level between sources

(page 14).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

*1 When EQ3 is activated.

*2 When AUX source is activated.

CLOCK-ADJ (Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 10, 11).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*

1

(AUX Audio)

To turn the AUX source display “AUX-A-ON”

(

z) or “AUX-A-OFF” (page 14).

continue to next page t

14

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

* Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“AUX FRONT IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Adjust the input level (page 13).

A.OFF (Auto Off)

To shut off automatically after a desired time

when the unit is turned off.

– “A.OFF-NO” (

z), “A.OFF-30S (Seconds),”

“A.OFF-30M (Minutes)” or “A.OFF-60M

(Minutes).”

DEMO

(Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIMMER

To change the brightness of the display.

– “DIMMER-AT” (

z): to dim the display

automatically when you turn lights on.

– “DIMMER-OFF”: to deactivate the dimmer.

– “DIMMER-ON”: to dim the display.

ILLUMI (Illumination)

To change the illumination color: “ILLUMI-1”

(

z) or “ILLUMI-2.”

M.DSPL (Motion Display)

To select the Motion Display mode.

– “M.DSPL-SA” (

z): to show moving patterns

and spectrum analyzer.

– “M.DSPL-ON”: to show moving patterns.

– “M.DSPL-OFF”: to deactivate the Motion

Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically

when the disc/album/track is changed.

– “A.SCRL-ON” (

z): to scroll.

– “A.SCRL-OFF”: to not scroll.

LOCAL (Local Seek Mode)

– “LOCAL-ON” : to only tune into stations with

stronger signals.

– “LOCAL-OFF” (

z): to tune normal reception.

MONO*

2

(Monaural Mode)

To improve poor FM reception, select monaural

reception mode.

– “MONO-ON” : to hear stereo broadcast in

monaural.

– “MONO-OFF” (

z): to hear stereo broadcast in

stereo.

REG*

2

(Regional)

To set “REG-ON” (

z) or “REG-OFF” (page 10).

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF

OFF” (

z), “LPF125Hz” or “LPF 78Hz.”

LOUD (Loudness)

To allow you to listen clearly at low volume

levels.

– “LOUD-ON” : to reinforce bass and treble.

– “LOUD-OFF” (

z): to not reinforce bass and

treble.

BTM (page 9)

*1 When the unit is turned off.

*2 When FM is received.

AUX

Connecting cord*

(not supplied)

15

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• SEL (select) button

The same as the select button on the unit.

During the Quick-BrowZer mode, (SEL)

(select) is inactive.

• PRESET/DISC control

CD/USB: The same as (1)/(2) (ALBUM –/+)

on the unit (push in and rotate).

Radio: To receive stored stations (push in and

rotate).

• VOL (volume) control

The same as the control dial on the unit (rotate).

• SEEK/AMS control

The same as (SEEK) –/+ on the unit (rotate, or

rotate and hold).

• DSPL (display) button

To change display items.

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

S

E

L

D

SP

L

M

O

D

E

S

E

L

D

S

P

L

M

O

D

E

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

16

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna (aerial) will extend automatically

while the unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm (3

1

/4 in) CDs.

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the center out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analog discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, and Multi Session.

• The maximum number of:

– folders (albums): 150 (including root and empty

folders).

– files (tracks) and folders contained in a disc: 300

(if a folder/file names contain many characters,

this number may become less than 300).

– displayable characters for a folder/file name is

32 (Joliet), or 64 (Romeo).

• When the disc is recorded in Multi Session, only

the first track of the first session format is

recognized and played (any other format is

skipped). The priority of the format is CD-DA and

MP3/WMA/AAC.

– When the first track is a CD-DA, only CD-DA of

the first session is played.

– When the first track is not a CD-DA, the MP3/

WMA/AAC session is played. If the disc has no

data in any of these formats, “NO MUSIC” is

displayed.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection technologies are marketed by

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side. However,

since the audio material side does not conform to

the Compact Disc (CD) standard, playback on this

product is not guaranteed.

17

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

About USB devices

• Mass Storage Class and ATRAC Audio Device

type USB devices compliant with the USB

standard can be used. However, this unit cannot

recognize USB devices via a USB HUB. For

details on the compatibility of your USB device,

visit the Sony support website (page 22).

• Corresponding codec is different according to

device type.

– Mass Storage Class: MP3/WMA/AAC

– ATRAC Audio Device: ATRAC/MP3/WMA/

AAC

• DRM (Digital Rights Management) files other

than ATRAC may not be played.

• The maximum number of displayable data is as

follows.

Mass Storage Class:

– folders (albums): 128, files (tracks) per folder:

500

ATRAC Audio Device: ATRAC/MP3/WMA/AAC

– albums/artists/playlists/genres: 65535, tracks:

65535

Notes

• When using a cable, use the one supplied with the

USB device to connect.

• Do not use a USB device that is so large or heavy it

may interfere with driving operations.

• Do not leave a USB device in a parked car, as

malfunction may result.

• It may take time for playback to begin, depending on

the amount of recorded data.

• Backup of data in a USB device is recommended.

Playback order of MP3/WMA/AAC

files (CD-R/RW or Mass Storage

Class)

About MP3 files

• MP3, which stands for MPEG-1 Audio Layer-3, is

a music file compression format standard. It

compresses audio CD data to approximately 1/10

of its original size.

• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to

MP3 only. ID3 tag is 15/30 characters (1.0 and

1.1), or 63/126 characters (2.2, 2.3 and 2.4).

• When naming an MP3 file, be sure to add the file

extension “.mp3” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) MP3 file, elapsed playing time

may not display accurately.

Note

If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

About WMA files

• WMA, which stands for Windows Media Audio,

is a music file compression format standard. It

compresses audio CD data to approximately 1/22*

of its original size.

• WMA tag is 63 characters.

• When naming a WMA file, be sure to add the file

extension “.wma” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) WMA file, elapsed playing time

may not display accurately.

* only for 64 kbps

Note

Playback of the following WMA files is not supported.

– lossless compression

About AAC files

• AAC, which stands for Advanced Audio Coding,

is a music file compression format standard. It

compresses audio CD data to approximately 1/11*

of its original size.

• AAC tag is 126 characters.

• When naming an AAC file, be sure to add the file

extension “.m4a” to the file name.

• During playback or fast-forward/reverse of a VBR

(variable bit rate) AAC file, elapsed playing time

may not display accurately.

* only for 128 kbps

Note

Playback of the following AAC files is not supported.

– lossless compression

– copyright-protected

About ATRAC files

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

The characters for text information written by

SonicStage are displayed.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Folder

(album)

MP3/WMA/

AAC file

(track)

MP3/WMA/AAC

18

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery. Use of any other battery may present a

risk of fire or explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 5)

and clean the connectors with a cotton swab. Do not

apply too much force. Otherwise, the connectors

may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1Detach the front panel (page 5).

2Pinch both edges of the protection collar,

then pull it out.

1

2

+ side up

c

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10 A)

Main unit

Back of the front

panel

x

19

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:RightG:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Right

CDX-GT620U

3-275-494-22 (1)

2 Remove the unit.

1 Insert both release keys simultaneously

until they click.

2 Pull the release keys to unseat the unit.

3 Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range: 87.5 – 108.0 MHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz

LW: 153 – 279 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: MW: 30 µV, LW: 40 µV

USB Player section

Interface: USB (Full-speed)

Maximum current: 500mA

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W × 4 (at 4 ohms)

General

Output:

Audio outputs terminal (front/rear)

Subwoofer output terminal (mono)

Power antenna (aerial) relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Remote controller input terminal

Antenna (aerial) input terminal

AUX input jack (stereo mini jack)

Tone controls:

Low: ±10 dB at 60 Hz (XPLOD)

Mid: ±10 dB at 1 kHz (XPLOD)

High: ±10 dB at 10 kHz (XPLOD)

Power requirements: 12 V DC car battery

(negative ground (earth))

Dimensions: Approx. 178 × 50 × 180 mm

(7

1

/8 × 2 × 7

1

/8 in) (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 162 mm

(7

1

/4 × 2

1

/8 × 6

1

/2 in) (w/h/d)

Mass: Approx. 1.2 kg (2 lb 11 oz)

Supplied accessories:

Card remote commander: RM-X151

Parts for installation and connections (1 set)

Optional accessory:

Rotary commander: RM-X4S

Your dealer may not handle some of the above listed

accessory. Please ask the dealer for detailed

information.

Hook facing

inwards.

continue to next page t

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

20

G:\SONY\09 ME\844488S_CDX-

GT620U_EUR\0919\3275494221\327549422CDXGT620UEUR\01US02CD-EUR.fm

masterpage:Left

CDX-GT620U

3-275-494-22 (1)

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

Content providers are using the digital rights

management technology for Windows Media

contained in this device (“WM-DRM”) to protect

the integrity of their content (“Secure Content”) so

that their intellectual property, including copyright,

in such content is not misappropriated.

This device uses WM-DRM software to play

Secure Content (“WM-DRM Software”). If the

security of the WM-DRM Software in this device

has been compromised, owners of Secure Content

(“Secure Content Owners”) may request that

Microsoft revoke the WM-DRM Software’s right

to acquire new licenses to copy, display and/or

play Secure Content. Revocation does not alter the

WM-DRM Software’s ability to play unprotected

content. A list of revoked WM-DRM Software is

sent to your device whenever you download a

license for Secure Content from the Internet or

from a PC. Microsoft may, in conjunction with

such license, also download revocation lists onto

your device on behalf of Secure Content Owners.

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• Packaging cushions are made from paper.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order, check

the fuse.

• If the unit is turned off and the display disappears, it

cannot be operated with the remote commander.

t Turn on the unit.

The power antenna (aerial) does not extend.

The power antenna (aerial) does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone ATT

function (when the interface cable of a car telephone

is connected to the ATT lead) is activated.

• The position of the fader control “FAD” is not set for

a 2-speaker system.

No beep sound.

• The beep sound is canceled (page 13).

• An optional power amplifier is connected and you are

not using the built-in amplifier.

The contents of the memory have been erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power supply lead or battery has been

disconnected.

• The power supply lead is not connected properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

is switched.

The leads are not matched correctly with the car’s

accessory power connector.

During playback or reception, demonstration

mode starts.

If no operation is performed for 5 minutes with

“DEMO-ON” set, demonstration mode starts.

t Set “DEMO-OFF” (page 14).

The display disappears from/does not appear

in the display window.

• The dimmer is set “DIMMER-ON” (page 14).

• The display disappears if you press and hold (OFF).

t Press and hold (OFF) on the unit until the

display appears.

• The connectors are dirty (page 18).

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates

after turning off the unit.

t Turn off the unit.

Card remote commander operation is not

possible.

Make sure the insulation film has been removed

(page 4).

La page charge ...

Sony CDXGT620U Manuel utilisateur

Ce manuel convient également à

Sony CDXGT620U Manuel utilisateur

dans d''autres langues

Documents connexes