LG ETNI96GB8Z.ENWAARZ Le manuel du propriétaire

Catégorie
Climatiseurs mobiles
Taper
Le manuel du propriétaire
TYPE: Multi V FRESH AIR INTAKE UNIT
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
P/NO : MFL63722001
www.lg.com
ENGLISH
ITALIANO ESPAÑOL FRANCAIS
DEUTSCH
PORTUGUESE
ΕΛΛΗΝΙΚΆ
NEDERLANDS
êìëëäàâ üáõä
2 Fresh Air Intake Unit
Fresh Air Intake Unit Ownerʼs Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Write the model and serial numbers here:
Model #
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
Staple your receipt to this page in the event you need
to prove date of purchase or to issue warranty.
READ THIS MANUAL
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
The air conditioner is not intended for use by young
children or invalids without supervision.
Young children should be supervised to ensure that
they do not play with the air conditioner.
When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
Installation work must be performed in accordance with
the National Electric Code by qualified and authorized
personnel only.
Safety Precautions.................3
Prior to Operation ..................6
Operating Instructions...........7
Name and Function of Remote
Controller ..............................7
Operation Details ...................9
Operation Range ..................9
Maintenance and Service ....10
Before you Call for
Service................................12
Safety Precautions
Ownerʼs Manual 3
ENGLISH
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be
followed.
Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.
WARNING
CAUTION
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
Installation
Do not use a defective or
underrated circuit breaker. Use
this appliance on a dedicated
circuit.
• There is risk of fire or electric
shock.
For electrical work, contact the
dealer, seller, a qualified
electrician, or an Authorized
Service Center.
• Do not disassemble or repair the
product. There is risk of fire or
electric shock.
Always ground the product.
• There is risk of fire or electric
shock.
Install the panel and the cover
of control box securely.
• There is risk of fire or electric
shock.
Always install a dedicated
circuit and breaker.
• Improper wiring or installation
may cause fire or electric shock
Use the correctly rated breaker
or fuse.
• There is risk of fire or electric
shock.
Do not modify or extend the
power cable.
• There is risk of fire or electric
shock.
Do not install, remove, or re-
install the unit by yourself
(customer).
• There is risk of fire, electric shock,
explosion, or injury.
Be cautious when unpacking
and installing the product.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
For installation, always contact
the dealer or an Authorized
Service Center.
• There is risk of fire, electric shock,
explosion, or injury.
Do not install the product on a
defective installation stand.
• It may cause injury, accident, or
damage to the product.
Be sure the installation area
does not deteriorate with age.
• If the base collapses, the air
conditioner could fall with it,
causing property damage,
product failure, and personal
injury.
Safety Precautions
4 Fresh Air Intake Unit
Do not allow water to run into
electric parts.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
Do not use the product in a
tightly closed space for a long
time.
• Oxygen deficiency could occur.
When flammable gas leaks,
turn off the gas and open a
window for ventilation before
turn the product on.
• Do not use the telephone or turn
switches on or off.
There is risk of explosion or fire
If strange sounds, or small or
smoke comes from product.
Turn the breaker off or
disconnect the power supply
cable.
• There is risk of electric shock or
fire.
Stop operation and close the
window in storm or hurricane.
If possible, remove the product
from the window before the
hurricane arrives.
• There is risk of property damage,
failure of product, or electric
shock.
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
• There is risk of physical injury,
electric shock, or product failure.
When the product is soaked
(flooded or submerged),
contact an Authorized Service
Center.
• There is risk of fire or electric
shock.
Be cautious that water could
not enter the product.
• There is risk of fire, electric shock,
or product damage.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
Operation
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
• There is risk of fire or electrical
shock.
Do not place a heater or other
appliances near the power
cable.
• There is risk of fire and electric
shock.
Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.
• Moisture may condense and wet
or damage furniture.
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
• There is risk of fire or electric
shock.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
When the product is not be used for a long time,
disconnect the power supply plug or turn off the
breaker.
• There is risk of product damage or failure, or
unintended operation.
Take care to ensure that nobody could step on or
fall onto the outdoor unit.
• This could result in personal injury and product
damage.
Safety Precautions
Ownerʼs Manual 5
ENGLISH
Installation
CAUTION
Always check for gas (refrigerant)
leakage after installation or repair
of product.
• Low refrigerant levels may
cause failure of product.
Install the drain hose to ensure
that water is drained away
properly.
• A bad connection may cause
water leakage.
Keep level even when installing
the product.
• To avoid vibration or water
leakage.
Operation
Do not install the product where the noise
or hot air from the outdoor unit could
damage the neighborhoods.
• It may cause a problem for your
neighbors.
Use two or more people to lift and
transport the product.
• Avoid personal injury.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
It may cause corrosion on the product.
Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation
.
Do not expose the skin directly
to cool air for long periods of
time. (Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special
purposes, such as preserving foods,
works of art, etc. It is a consumer air
conditioner, not a precision
refrigeration system.
• There is risk of damage or loss
of property.
Do not block the inlet or outlet
of air flow.
• It may cause product failure.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• There is risk of fire, electric
shock, or damage to the plastic
parts of the product.
Do not touch the metal parts of the
product when removing the air
filter. They are very sharp!
• There is risk of personal injury.
Do not step on or put anyting
on the product. (outdoor units)
• There is risk of personal injury
and failure of product.
Always insert the filter securely.
Clean the filter every two weeks
or more often if necessary.
• A dirty filter reduces the efficiency of
the air conditioner and could cause
product malfunction or damage.
Do not insert hands or other objects
through the air inlet or outlet while the
product is operated.
• There are sharp and moving parts
that could cause personal injury.
Do not drink the water drained
from the product.
• It is not sanitary and could cause
serious health issues.
If the liquid from the batteries gets onto your skin
or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
If you eat the liquid from the batteries, brush your
teeth and see doctor. Do not use the remote if the
batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
Use a firm stool or ladder when
cleaning or maintaining the
product.
• Be careful and avoid personal
injury.
Replace the all batteries in the
remote control with new ones of
the same type. Do not mix old and
new batteries or different types of
batteries.
• There is risk of fire or explosion
Do not recharge or
disassemble the batteries.
Do not dispose of batteries in a
fire.
• They may burn or explode.
Prior to operation
6 Fresh Air Intake Unit
Prior to Operation
1. Contact an installation specialist for installation.
2. Use a dedicated circuit.
1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.
Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Such usage could damage the items.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling
sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates
at a very high speed during operation. There is a possibility of injury if the unitʼs power is
accidentally triggered on while cleaning inner parts of the unit.
For repair and maintenance, contact your authorized service dealer.
Preparing for operation
Usage
Cleaning and maintenance
Service
Operating Instructions
Ownerʼs Manual 7
1
4
5
7
11
10
9
8
2
3
6
13
12
Please attach the inform label inside of the door.
Please choose proper language depend on your
country.
14
15
Operating Instructions
Name and function of wired remote controller(Accessory)
ENGLISH
Operating Instructions
※ Some functions may not be operated and displayed depending on the product type.
※ It will display strange value to the room temperature if wired remote controller is not connected.
Model : PQRCVSL0 (Black Color)
PQRCVSL0QW (White Color)
1. Operation indication screen
2. Set temperature button
It will set not room temperature but outlet air temperature.
3. Fan speed button
• Fan Speed have 3 Steps.
• Middle and Low step is same
4. ON/OFF button
5. Opration mode selection button
6. Wireless remote controller receiver
• Some products don't receive the wireless signals.
7. Air flow button
8. Subfunction button
9. Function setting button
10. Ventilation button
11. Reservation
12. Up,down,left,right button
To check the indoor temperature, press button.
13. Room temperature button
• Displays only the room temperature of the remote
controller perception.
• There is no control of room temperature.
• In case of fresh air intake unit, displays only the
temperature around remote controller.
14. Setting/Cancel button
15. Exit button
Operating Instructions
8 Fresh Air Intake Unit
Name and function of wired remote controller(Accessory)
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
Fan Mode
Cooling Model( ), Heat Pump Model( )
Operation Mode
PQWRCDF0 (Heat pump)
PQWRHDF0 (Cooling only)
13
14
15
16
1
8
9
10
11
12
2
3
4
5
6
7
1. Plasma button (optional)
Used to start or stop the plasma-purification
function.
2. Jet cool button
Speed cooling operates super high fan speed.
3. Operation mode selection button
Used to select the operation mode.
4. Function setting button
Used to set or clear auto clean or smart clean.
5. LCD luminosity button (optional)
Used to adjust LCD luminosity
6. Smart clean button (optional)
Used to start or stop smart clean.
7. Clear all button
Used to clear all timer.
8. Room temperature setting button
Used to select the setting outlet temperature
9. ON/OFF button
Used to turn off/on the unit.
10. Indoor fan speed selection button
Fan speed in all step is same
11. Auto swing button
Used to stop or start louver movement and set the
desired up/down airflow direction.
12. Horizontal airflow direction control button
(optional)
Used to set the desired horizontal airflow direction.
13. Timer and time setting button
Used to set the time of starting or stopping and
sleeping operation.
14. Room temperature checking button
Used to check the room temperature.
• Displays only the room temperature of the remote
controller perception.
There is no control of room temperature.
15. ˚C/˚F switch button
Used to switch temperature reading from Celsius to
Fahrenheit.
16. Reset button
Used to reset the remote controller.
Operation Details
Ownerʼs Manual 9
Operation Details
Operation range
Usage Limitations
ENGLISH
FAU will operate in the below range. Hot outdoor temperature (over 43℃) or cold outdoor temperature (under -
5℃) will make customer feel uncomfortable because FAU outlet temperature might be not enough controlled in
that region. * FAU : Fresh Air Intake Unit
Fan operation (thermo off)
Fan operation (thermo off)
Fan operation
Fan operation
Cooling
Cooling
Cooling
Cooling
Outdoor Air Temperature (Toa) ℃
43℃ (1)19°C15°C5°C-5°C
Cooling mode
Heating mode
Heating
Heating
16°C
16°C
18°C
(1)Normal model : 43°C
Tropical model : 48°C
(2)Normal model : 43°C
Tropical model : 48°C
Automatic mode
Heating
Heating
Fan stop
6°C 18°C
-5°C 19°C 43℃ (2)(33.5°)15°C
Maintenance and Service
10 Fresh Air Intake Unit
Grille, Case, and Remote Controller
Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
Power supply must be disconnected before
cleaning the indoor unit.
NOTICE
1. Remove the Air filter.
Take hold of the tab and pull slightly forward
to remove the filter.
CAUTION:
When the air filter is
to be removed, do not touch the
metal parts of the indoor unit.
It may cause an injury.
2. Clean dirt from the air filter using a vacuum
cleaner or washing with water.
If dirt is conspicuous, wash with a neutral
detergent in lukewarm water.
If hot water (50°C or more) is used, it may
be deformed.
3. After washing with water, dry well in
the shade.
Do not expose the air filter to direct
sunlight or heat from a fire when drying it.
4. Install the air filter.
Air filter
The air filters behind the front grille should be checked and
cleaned once every 2 weeks or more often if neccessary.
CAUTION: Before performing any maintenance, turn off the main power to
the system.
Never use any of the followings:
Water hotter than 40°C.
Could cause deformation
and/or discoloration.
Volatile substances.
Could damage the
surfaces of the air
conditioner.
Air outlet vent
Air filter
Maintenance and Service
Maintenance and Service
Ownerʼs Manual 11
ENGLISH
When the air conditioner is not going to be used for a long time.
Operation Tips
Helpful information
The air filters and your electiric bill.
If the air filters become clogged with dust, the
cooling capacity will drop, and 6% of the electricity
used to operate the air conditioner will be wasted.
When it is not going to be used for
a long time.
When the air conditioner is used again.
Operate the air conditioner at the
following settings for 2 to 3 hours.
• Type of operation: Fan operation mode.
• This will dry out the internal mechanisms.
Turn off the breaker.
Turn off the breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Clean the air filter and install it in the
indoor unit.
Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
Check that the ground wire is
connected correctly. It may be
connected to the indoor unit side.
Do not overcool the room.
This is not good for the health
and wastes electricity.
Keep blinds or curtains
closed.
Do not let direct sunshine
enter the room when the air
conditioner is in operation.
Keep the room temperature
uniform.
Adjust the vertical and
horizontal airflow direction to
ensure a uniform temperature
in the room.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and
windows as much as possible
to keep the cool air in the
room.
Clean the air filter regularly.
Blockages in the air filter
reduce the airflow and lower
cooling and dehumidifying
effects. Clean at least once
every two weeks.
Ventilate the room
occasionally.
Since windows are kept
closed, it is a good idea to
open them and ventilate the
room now and then.
Maintenance and Service
12 Fresh Air Intake Unit
Before you call for service...
?
Check the following points before requesting repairs or service.... If the malfunction persists,
please contact your dealer.
Troubleshooting Tips! Save time and money!
• Have you made a
mistake in timer
operation?
• Has the fuse blown
or has the circuit
breaker been
tripped?
• Check that this is not
a damp smell exuded
by the walls, carpet,
furniture or cloth
items in the room.
• Condensation occurs
when the airflow from
the air conditioner
cools the warm room
air.
• This is the protector
of the mechanism.
• Wait about three
minutes and
operation will begin.
The air conditioner
does not operate.
The room has a
peculiar odor.
It seems that
condensation is
leaking from the air
conditioner.
Air conditioner does
not operate for about
3 minutes when
restart.
Does not cool or heat
effectively.
The air conditioner
operation is noisy.
Crack sound is
heard.
Remote control
display is faint, or no
display at all.
• Is the air filter dirty?
See air filter cleaning
instructions.
• The room may have
been very hot when
the room air
conditioner was first
turned on. Allow time
for it to cool down.
• Has the temperature
been set incorrectly?
• Are the indoor unit's
air inlet or outlet vents
obstructed?
• For a noise that
sounds like water
flowing.
-This is the sound of
freon flowing inside
the air conditioner
unit.
• For a noise that
sounds like the
compressed air
releasing into
atmosphere.
-This is the sound of
the dehumidifying
water being
processed inside the
air conditioning unit.
• This sound is generated
by the expansion/
constriction of the front
panel, etc. due to
changes of
temperature.
• Cleaning the filter,
press the Timer button
and button of wired
remote controller at
the same time for 3
sec.
• Are the batteries
depleted?
• Are the batteries
inserted in the
opposite (+) and (-)
directions? 
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to
excess water.
NOTICE
Filter sign lamp
(LED) is ON.
TIPO: UNITÀ INGRESSO ARIA FRESCA Multi V
MANUALE DELL’UTENTE
CONDIZIONATORE D'ARIA
Leggere attentamente questo manuale e conservarlo per
riferimento futuro.
P/NO : MFL63722001
www.lg.com
ITALIANO
2 Unità ingresso aria fresca
Manuale dellʼutente dellʼunità di aspirazione UNITÀ INGRESSO ARIA FRESCA
.
SOMMARIO
DATI DA RICORDARE
Annotare qui il numero di serie e il modello:
Modello #
Seriale #
I numeri sono riportati sull'etichetta a lato di ogni unità.
Nome del rivenditore
Data di acquisto
Spillare la ricevuta su questa pagina qualora fosse
necessaria per provare la data di acquisto o per
motivi di garanzia.
LEGGERE IL MANUALE
Allʼinterno troverà molti suggerimenti utili sullʼuso e la
manutenzione del condizionatore.
Un minimo di attenzione può far risparmiare molto
tempo e denaro nel corso della vita del condizionatore.
Nella tabella di riferimento per la risoluzione dei
problemi troverà molte risposte ai problemi più comuni.
Consultando la tabella Risoluzione dei problemi
potrebbe non essere necessario contattare il servizio di
assistenza.
AVVERTENZE
Contattare un tecnico dell'assistenza autorizzato per la
riparazione o la manutenzione dellʼunità.
Contattare lʼinstallatore per eseguire lʼinstallazione dellʼunità.
• Il condizionatore non è stato progettato per essere
utilizzato da bambini o invalidi senza supervisione.
• È consigliabile vigilare sui bambini affinché essi non
giochino con il condizionatore.
• Se il cavo di alimentazione deve essere sostituito, il
servizio di sostituzione deve essere eseguito solo da
personale autorizzato utilizzando parti di ricambio
originali.
• Il servizio di installazione deve essere eseguito in
conformità con gli standard elettrici nazionali d
esclusivamente da personale autorizzato.
Precauzioni per la sicurezza
...3
Prima dellʼuso.........................6
Istruzioni per il
funzionamento........................7
Nomi e funzioni del
telecomando .........................7
Dettagli di funzionamento .....9
Intervallo di funzionamento...9
Manutenzione e assistenza
..10
Prima di rivolgersi
allʼassistenza ......................12
Precauzioni di sicurezza
Manuale dellʼutente 3
ITALIANO
Precauzioni di sicurezza
Per evitare infortuni dell'utente o altre persone e danni alle cose, attenersi alle seguenti
istruzioni.
Lʼuso errato causato dalla mancata osservanza delle istruzioni può causare danni o lesioni.
Lʼimportanza è classificata dalle seguenti indicazioni.
Il significato dei simboli utilizzati in questo manuale è spiegato di seguito.
ATTENZIONE
AVVISO
Questo simbolo indica la possibilità di decesso o di grave
infortunio.
Questo simbolo indica la possibilità di infortunio o danni alle cose.
Azione/operazione da non fare.
Attenersi alle istruzioni.
ATTENZIONE
Installazione
Non utilizzare interruttori
automatici difettosi o di potenza
inferiore. Utilizzare questa
apparecchiatura su un circuito
dedicato.
• Vi è il rischio di scosse elettriche o
incendio.
Per i collegamenti elettrici,
rivolgersi al rivenditore, a un
elettricista qualificato o a un
centro di assistenza autorizzato.
• Non smontare o tentare di riparare
il prodotto. Vi è il rischio di scosse
elettriche o incendio.
Il prodotto deve essere sempre
provvisto di messa a terra.
• Vi è il rischio di scosse elettriche o
incendio.
Installare il pannello e il
coperchio della scatola di
controllo in modo sicuro.
• Vi è il rischio di scosse elettriche o
incendio.
Installare sempre un interruttore
automatico e circuito dedicato.
• L'errato cablaggio o installazione
può causare incendi o scosse
elettriche.
Utilizzare fusibili o interruttori
automatici di giusta tensione.
• Vi e il rischio di scosse elettriche o
incendio.
Non modificare o prolungare il
cavo di alimentazione.
• Vi è il rischio di scosse elettriche o
incendio.
L'unità non deve essere installata
né rimossa dall'utente (cliente).
• Vi è il rischio di scosse elettriche,
incendio, esplosione o lesioni.
Disimballare e installare il
prodotto con attenzione.
• I bordi taglienti possono causare
infortuni. Fare particolare
attenzione ai bordi del contenitore
e alle alette del condensatore e
dell'evaporatore.
Per l'installazione, rivolgersi
sempre al rivenditore o a un
centro di assistenza autorizzato.
• Vi è il rischio di scosse elettriche,
incendio, esplosione o lesioni.
Non installare il prodotto su
supporti di installazione
difettosi.
• Ciò potrebbe causare infortuni,
incidenti o danni al prodotto.
Accertarsi che l'area di
installazione non sia soggetta a
deterioramento nel tempo.
• Se la base si rompe, l'unità può
cadere con essa, causando
infortuni a persone, guasti al
prodotto o danni alle cose.
Precauzioni di sicurezza
4 Unità ingresso aria fresca
Funzionamento
Non collegare/scollegare il cavo
di alimentazione alla/dalla presa
durante il funzionamento.
• Vi è il rischio di scosse elettriche o
incendio.
Non toccare il prodotto con le
mani bagnate.
• Vi è il rischio di scosse elettriche o
incendio.
Non posizionare riscaldatori o
altre apparecchiature vicino al
cavo di alimentazione.
• Vi è il rischio di scosse elettriche e
incendio.
Non utilizzare il prodotto troppo
a lungo in ambienti molto umidi
e con una finestra o una porta
aperta.
• L'umidità potrebbe condensarsi e
bagnare o danneggiare i mobili.
Avere cura di non tirare o
danneggiare il cavo di
alimentazione durante il
funzionamento.
• Vi è il rischio di scosse elettriche o
incendio.
Non mettere nulla sul cavo di
alimentazione.
• Vi è il rischio di scosse elettriche o
incendio.
Non far cadere acqua sui
componenti elettrici.
• Vi è il rischio di scosse elettriche,
incendio o guasti al prodotto.
Non conservare o utilizzare gas
infiammabili o combustibili in
prossimità del prodotto.
• Vi è il rischio di incendio o guasti al
prodotto.
Non utilizzare il prodotto in
luoghi chiusi per periodi
prolungati.
• Potrebbe esservi una scarsità di
ossigeno.
In caso di perdite di gas
infiammabile, aprire la finestra
per ventilare il locale prima di
azionare l'unità.
• Non utilizzare il telefono o
accendere o spegnere interruttori.
Vi è il rischio di esplosioni o
incendi.
In caso di rumori, odori o fumo
anomali provenienti dal
prodotto. Spegnere
l'interruttore automatico e
scollegare il cavo di
alimentazione.
• Vi è il rischio di scosse elettriche o
incendio.
Arrestare il funzionamento e
chiudere la finestra in caso di
tempeste o uragani. Se
possibile, rimuovere il prodotto
dalla finestra prima che arrivi un
uragano.
• Vi è il rischio di danni alle cose,
guasti al prodotto o scosse
elettriche.
Non aprire la griglia di
aspirazione del prodotto
durante il funzionamento (non
toccare il filtro elettrostatico, se
presente).
• Vi è il rischio di lesioni fisiche,
scosse elettriche o guasti al
prodotto.
In caso di allagamento del
prodotto, rivolgersi a un centro
di assistenza autorizzato.
• Vi è il rischio di scosse elettriche o
incendio.
Evitare che nel prodotto entri
acqua.
• Vi è il rischio di scosse elettriche,
incendio o danni al prodotto.
Di tanto in tanto, ventilare il prodotto quando
utilizzato insieme a fornelli ecc.
• Vi è il rischio di scosse elettriche o incendio.
Spegnere l'alimentazione prima di pulire o riparare
il prodotto.
• Vi è il rischio di scosse elettriche.
In caso di inutilizzo del prodotto per lunghi
periodi, scollegare il cavo di alimentazione e
spegnere l'interruttore automatico.
• Vi è il rischio di guasti al prodotto o attivazione
accidentale.
Evitare che l'unità esterna sia calpestata da
qualcuno.
• Ciò potrebbe lesioni personali e danni al prodotto.
Precauzioni di sicurezza
Manuale dellʼutente 5
ITALIANO
Installazione
AVVISO
Dopo l'installazione o la
riparazione del prodotto,
verificare sempre che non vi
siano perdite di gas (refrigerante).
• Livelli bassi di refrigerante
potrebbero causare guasti al
prodotto.
Installare il tubo flessibile di
scarico in modo da garantire
uno scarico corretto e sicuro.
• Un errato collegamento può
causare perdite d'acqua.
Installare il prodotto
allineandolo in modo uniforme.
• Per evitare perdite d'acqua.
Non installare il prodotto in modo che il
rumore o l'aria calda provenienti dall'unità
esterna possano causare danni ai vicini.
• Ciò potrebbe causare problemi
con i vicini.
Per sollevare e trasportare il
prodotto sono consigliabili due
persone.
• Evitare lesioni personali.
Non installare il prodotto in
luoghi esposti direttamente al
vento di mare (spruzzi di sale).
• Ciò potrebbe causare corrosioni al
prodotto. La corrosione, in
particolare sul condensatore e sulle
alette dell'evaporatore, può causare
malfunzionamenti o inefficienza.
Non esporre la pelle
direttamente all'aria fresca per
periodi prolungati (non sedersi
nel raggio d'azione
dell'aspirazione).
• Ciò potrebbe causare danni alla
salute.
Non utilizzare il prodotto per scopi
specifici, ad esempio per conservare
alimenti, animali, opere d'arte ecc.
Questo prodotto è un condizionatore
d'aria, non un sistema di refrigerazione.
• Vi ò il rischio di danni o perdita
di cose.
Non bloccare l'ingresso o
l'uscita del flusso d'aria.
• In caso contrario, si potrebbero
verificare guasti al prodotto.
Funzionamento
Utilizzare un panno soffice per la
pulizia. Non utilizzare detergenti
aggressivi, solventi ecc.
• Vi è il rischio di scosse elettriche,
incendio o danno alle parti in
plastica del prodotto.
Non toccare le parti metalliche del
prodotto durante la rimozione del filtro
dell'aria. Sono molto appuntite!
• Vi è il rischio di lesioni personali.
Non calpestare o mettere
oggetti sul prodotto (unità
esterne).
• Vi è il rischio di lesioni personali o
guasti al prodotto.
Inserire sempre il filtro in modo
stabile. Pulire il filtro ogni 2
settimane o più spesso, se
necessario.
• Un filtro sporco riduce l'efficienza del
condizionatore e potrebbe causare
danni o malfunzionamenti del prodotto.
Non introdurre le mani o altri
oggetti nella bocca di ingresso
o uscita dell'aria durante il
funzionamento.
• Le parti mobili metalliche sono
affilate e potrebbero causare
infortuni.
Non bere acqua fuoriuscita dal
prodotto.
• Ciò può causare gravi danni alla
salute.
Utilizzare una scala salda per
pulire o riparare il prodotto.
• Fare attenzione ed evitare lesioni
personali.
Sostituire tutte le batterie del telecomando
sempre con altre dello stesso tipo. Non
mischiare batterie nuove e vecchie o
batterie di tipo diverso.
• Vi è il rischio di esplosioni o
incendi.
Non ricaricare o smontare le
batterie. Non gettare le batterie
nel fuoco.
• Potrebbero bruciare o esplodere.
In caso di caduta del liquido delle batterie sulla
pelle o sugli indumenti, lavare accuratamente con
acqua pulita. Non utilizzare il telecomando se le
batterie presentano delle perdite.
• Le sostanze chimiche delle batterie potrebbero
causare scottature o altri pericoli.
In caso di ingestione di liquido della batteria,
lavarsi i denti e consultare subito un medico. In
caso di perdita dalle batterie, non utilizzare il
telecomando.
Le sostanze chimiche contenute nelle batterie potrebbero
causare scottature o altri pericoli per la salute.
Prima dellʼuso
6 Unità ingresso aria fresca
Prima dellʼuso
1. Rivolgersi a un tecnico specializzato per lʼinstallazione.
2. Utilizzare un circuito dedicato.
1. Lʼesposizione prolungata al flusso diretto dellʼaria pu. Non esporre persone, animali o piante al
flusso diretto dellʼaria per periodi prolungati.
2. Per la possibilità di mancanza di ossigeno, in caso di uso con fornelli o altri dispositivi di
riscaldamento ventilare lʼambiente.
3.
Non utilizzare questo condizionatore dʼaria per scopi specifici (ad esempio per conservare strumenti di
precisione, alimenti, animali, piante o opere dʼarte). Un uso di questo tipo potrebbe danneggiare gli oggetti.
1. Non toccare le parti metalliche dellʼunità durante la rimozione del filtro. ILa manipolazione dei
bordi taglienti potrebbe causare lesioni.
2. Non pulire lʼinterno del condizionatore con acqua. Lʼesposizione allʼacqua può distruggere
lʼisolamento, causando scosse elettriche.
3. Prima di pulire lʼunità, accertarsi che lʼalimentazione sia esclusa e lʼinterruttore spento. Il
ventilatore raggiunge una velocità di rotazione elevata durante il funzionamento. Lʼaccensione
accidentale dellʼunit urante la pulizia delle parti interne pu ausare gravi lesioni.
Per interventi di riparazione e manutenzione, rivolgersi sempre al centro di assistenza autorizzato.
Preparazione per lʼuso
Uso
Pulizia e manutenzione
Riparazioni
Istruzioni per il funzionamento
Manuale dellʼutente 7
Safety Precautions
Remote Controller
ITALIANO
1
4
5
7
11
10
9
8
2
3
6
13
12
Attaccare l’etichetta informativa all’interno del coperchio.
Scegliere la lingua corretta in base al proprio
paese.
14
15
Nome e funzione del telecomando cablato (opzionale)
Istruzioni per il funzionamento
※ Alcune funzioni potrebbero non essere disponibili e visualizzate in base al tipo di prodotto.
※ Se il telecomando cablato non è collegato, verrà visualizzato un valore strano per la temperatura ambiente.
Modello : PQRCVSL0 (nero)
PQRCVSL0QW (bianco)
1. Display operativo
2. Tasto di impostazione della temperatura
Non imposta la temperatura ambiente, ma la temperatura dellʼaria in uscita.
3. Tasto velocità ventola
• Sono disponibili 3 livelli di velocità della ventola.
• Medio e basso sono uguali
4. TASTO ON/OFF
5. Tasto di selezione modalità di funzionamento
6. Ricevitore telecomando senza fili
• Alcuni prodotti non ricevono i segnali wireless.
7. Tasto flusso d'aria
8. Tasto della funzione secondaria
9. Pulsante di impostazione delle funzioni
10. Tasto di ventilazione
11. Programmazione
12. Tasto su, giù, sinistra, destra
Per controllare la temperatura interna premere il
pulsante .
13. Tasto temperatura ambiente
• Visualizza solo la temperatura ambiente del
sensore del telecomando.
Non cʼè nessun controllo della temperatura ambiente.
• Nel caso in cui è presente lʼunità di ingresso aria
fresca, visualizza solo la temperatura nelle
vicinanze del telecomando.
14. Tasto di impostazione/annullamento
15. Pulsante di chiusura
Istruzioni per il funzionamento
8 Unità ingresso aria fresca
Nome e funzione del telecomando cablato (opzionale)
Modalità di raffreddamento
Funzionamento automatico o cambio automatico
Modalità di deumidificazione
Modalità di riscaldamento
Modalità ventilatore
Modello a raffreddamento
( ),
modello a pompa di calore
( )
Modalità di funzionamento
PQWRCDF0 (pompa di calore)
PQWRHDF0 (solo raffreddamento)
13
14
15
16
1
8
9
10
11
12
2
3
4
5
6
7
1. Tasto plasma (opzionale)
Utilizzato per avviare o fermare la funzione di depurazione al plasma.
2. Tasto raffreddamento rapido
Questa modalità attiva un ventilatore a velocità molto elevata.
3. Tasto di selezione modalità di funzionamento
Utilizzato per selezionare la modalità di funzionamento
4. Pulsante di impostazione delle funzioni
Utilizzato per impostare o annullare la pulizia
automatica o la pulizia intelligente.
5. TASTO LUMINOSITA LCD (OPZIONALE)
Utilizzato per regolare la luminosità del pannello LCD.
6. Tasto pulizia intelligente (opzionale)
Utilizzato per avviare o fermare la funzione di
pulizia intelligente.
7. Tasto annulla tutto
Usato per cancellare il timer.
8. Tasto di impostazione temperatura ambiente
Utilizzato per impostare la temperatura in uscita.
9. TASTO ON/OFF
Accende/spegne l'unità.
10. Selettore velocità ventilatore interno
La velocità della ventola è uguale per tutti i livelli.
11. Tasto oscillazione automatica
Utilizzato per arrestare o avviare il movimento di oscillazione e
impostare la direzione desiderata del flusso dellʼaria verso lʼalto/basso.
12.
Tasto controllo della direzione del flusso dʼaria orizzontale
(opzionale)
Utilizzato per impostare la direzione desiderata del flusso d'aria orizzontale.
13. Tasto di impostazione ora e timer
Utilizzati per impostare lʼora di accensione e di spegnimento.
14. Tasto di controllo temperatura ambiente
Utilizzato per controllare la temperatura dellʼambiente.
• Visualizza solo la temperatura ambiente del
sensore del telecomando.
Non cʼè nessun controllo della temperatura ambiente.
15. Tasto di commutazione ˚C/˚F
Usato per cambiare la temperatura tra Celsius e
Fahrenheit.
16. Pulsante di reset
Usato per reimpostare il telecomando.
1 / 1

LG ETNI96GB8Z.ENWAARZ Le manuel du propriétaire

Catégorie
Climatiseurs mobiles
Taper
Le manuel du propriétaire