Samsung RF31FMESBSL Guide de démarrage rapide

Taper
Guide de démarrage rapide

Ce manuel convient également à

Sparkling Water Refrigerator
Quick User Guide
CONTENTS
1. Pick Up a Sodastream™ CO
2
Cylinder
2. Installing the CO
2
Cylinder
3. Using the Sparkling Water Dispenser
4. Using the Display
5. FAQ – Sparkling Water Dispenser
6. Optimum Operating Environment
DA68-02942A-05.indb 1 2018. 7. 31. �� 2:35
English - 2
1.
Pick Up a Sodastream™ CO
2
Cylinder
To power your sparkling water dispenser, pick up a Sodastream™ 60L CO
2
cylinder at retailer near
you. FREE!
Visit www.SodaStreamUSA.com/samsung (USA), www.SodaStream.ca/Samsung (Canada),
www.SodaStream.com.au (Australia) or www.SodaStream.co.nz (New Zealand) for SodaStream
retail locations and for details. (limit one per customer)
2. Installing the CO
2
Cylinder
1. Open the CO
2
cylinder cover.
The sparkling water maker is turned o by default. Since the sparkling water
maker is turned o, the “OFF” icon on the display is turned on.
2. Connect the CO
2
cylinder to the regulator. Turn the CO
2
cylinder clockwise to
install it.
You must use a Sodastream™ CO
2
cylinder (60 L).
Replacement SodaStream cylinders are available for easy exchange at over
10,000 locations. (USA/Canada)
Replacement SodaStream cylinders are available for easy exchange or refill at
local Sodastream retailers. (Australia/New Zealand)
Visit for more information.
Wrap the used cylinder and return it to the person who delivers the new cylinder in USA and
Canada. In Australia and New Zealand, please return empty CO
2
Cylinder to the service or
information counter at your local retailer for exchange/refill.
All costs associated to the refill or exchange of the CO
2
Cylinder are that of the refrigerator
owner.
USA www.SodaStreamUSA.com/samsung
Canada www.SodaStream.ca/Samsung
Australia www.SodaStream.com.au
New Zealand www.SodaStream.co.nz
Colombia Web : http://sodastream.com.co/
Facebook : http://www.facebook.com/SodaStreamColombia
Phone : +57 1 794 8207
Mobile phone : +57 318 728 8202
Mexico Web : www.sodastream.com.mx
Facebook : “http://www.facebook.com” and find with keyword “Soda Stream Mexico”
Phone : +52 55 5357 3767
Chile Web : http://www.sodastream.cl
Phone : +56 2 2946 5405
Brasil Web : http://www.sodastream.eco.br/cilindros-de-gas.html
Phone : 0800 772 8292
South Africa Web : www.sodastream.co.za
Phone : +2712-345-9220
DA68-02942A-05.indb 2 2018. 7. 31. �� 2:35
English - 3
Thread of CO
2
cylinder is dierent according to country by country.
3. Push the installed CO
2
cylinder fully into the cylinder case.
4. To lock the CO
2
cylinder, push the safety lever down.
The lever may be sti due to the internal pressure of the CO
2
cylinder. In this
case, hold the lever as shown by the figure on the right and press it down
firmly.
If you do not lock the CO
2
cylinder, the sparkling water maker will not work.
If the CO
2
cylinder is not firmly connected to the regulator, CO
2
gas may leak
with a “hissing” sound. In this case, repeat step 2, 3 and 4 to properly install
the CO
2
cylinder.
5. The sparkling water concentration is set to '2' by default. Press the "Sparkling Water" button to
set the concentration to a desired level and hold down the "Sparkling Water" button for 3 seconds
to reset the CO
2
cylinder. Once the CO
2
cylinder is reset, sparkling water is produced.
To produce sparkling water, the sparkling water tank is filled with water and the CO
2
gas is
injected according to the configured concentration.
To remove foreign substances that may exist in the sparkling water tank, discard the first 1.2L
of sparkling water.
The sparkling water will not dispense while it is producing. When the numbers ( ) next to the
sparkling water icon stops blinking, Sparkling water can be dispensed.
Press 3 seconds
To Uninstall the CO
2
cylinder, follow the above step #1 ~ #4 in reverse order.
If sparkling water is produced when the internal refrigerator temperature or the temperature of
the CO
2
cylinder is high, you may hear a “horn sound” When you turn on your refrigerator for the
first time, you should not generate sparkling water production until after approximately 2 hours.
When you purchase a new CO
2
cylinder, be sure to store it in a cool dry place until you are ready
to install it (23 ~ 68 °F (-5 ~ 20 °C)). If the cylinder is stored in higher temperatures, it may build
up extra internal pressure, which could create a “horn sound” when sparkling water is produced.
DA68-02942A-05.indb 3 2018. 7. 31. �� 2:35
English - 4
3. Using the Sparkling Water
Dispenser
NOTE
If you press the "Water" lever, normal water will be dispensed
regardless of the sparkling water setting.
If you press the "Ice/Sparkling" lever, sparkling water or ice
will be dispensed depending on the setting. (If you select the
“Sparkling Water” button, the sparkling water icon is displayed
and the previously selected ice icon is turned o.)
If there is no sparkling water in the sparkling water tank, the
sparkling water maker is operating or the CO
2
cylinder is empty,
no sparkling water will be dispensed even if you press the lever.
- While producing sparkling water, the numbers next to the
sparkling water icon blink.
If you use up the CO
2
gas in the cylinder, the density of the CO
2
gas in the produced sparkling water may be very low. In this
case, replace the CO
2
cylinder with a new one. After replacing
the CO
2
cylinder, you have to hold down the "Sparkling Water"
button for 3 seconds to reset the cylinder in order to start the
sparkling water production.
If you hold down the "Sparkling Water" button for 3 seconds, the cylinder is reset and sparkling
water is immediately produced. In this case, the amount of CO
2
gas injection increases and the
CO
2
of the sparkling water may be high.
When the sparkling water module is ‘o’ (the ‘o’ icon over the sparkling water icon is on), if you
hold down the "Cubed/Crushed" button for 3 seconds, the sparkling water maker immediately
produces sparkling water.
If you are not planning to use the sparkling water maker for an extended period of time, hold down
the "Cubed/Crushed" button for 3 seconds to turn the sparkling water maker o. Even if you stop
the sparkling water maker, sparkling water will be dispensed as long as sparkling water remains
in the sparkling water tank. (Stopping the sparkling water maker means disabling the automatic
sparkling water production function.)
DA68-02942A-05.indb 4 2018. 7. 31. �� 2:35
English - 5
USING THE SPARKLING WATER DISPENSER
1. Install the Sodastream™ CO
2
cylinder.
2. Press the "Sparkling Water" button to select a gas concentration level for the sparkling water.
- The default concentration level setting of a new product is Level 2. Pressing the "Sparkling
Water" button changes the level in the following order: Level 2 Level 3 Level 1 Level 2 .
- Level 1 is low concentration (Approximately 3g/L), Level 2 is medium concentration
(Approximately 5g/L), Level 3 is high concentration (Approximately 7g/L).
3. Pressing the "Sparkling Water" button for 3 seconds resets the CO
2
cylinder. The sparkling water
maker produces sparkling water at the selected concentration level.
4. While sparkling water is being produced, the numbers next to the sparkling water icon blink.
- The time required to produce sparkling water is determined by the configured concentration.
(Level 1: Approx. 10 mins; Level 2: Approx. 20 mins; Level 3: Approx. 30 mins)
- You Cannot change the concentration while producing sparkling water
- Even if you stop the production of sparkling water (Sparkling O) during the operation, sparkling
water will continue to be produced for that operation. The changed setting is applied once the
operation is complete and the automatic sparkling water production function is disabled.
5. When the sparkling water production is complete, the numbers next to the sparkling water icon
stop blinking.
6. If you press the "Ice/Sparkling" lever after selecting the "Sparkling Water" button, the produced
sparkling water is dispensed.
- If the sparkling water in the sparkling water tank runs out while sparkling water is being
extracted, more sparkling water is automatically produced at the previously configured CO
2
concentration.
- If there is less than 12 oz (340 ml) sparkling water remaining in the sparkling water tank
and the sparkling water extraction lever is not moved for a pre-determined period of time
(approx. 30 mins), sparkling water is automatically produced at the previously configured CO
2
concentration. (In this case, since the sparkling water already in the sparkling water tank is
mixed with the newly produced sparkling water, the CO
2
concentration of the water may dier
from the configured concentration.)
DA68-02942A-05.indb 5 2018. 7. 31. �� 2:35
English - 6
4. Using the Display
7
13
12 10 11 9
8
1
2
3
5
4
6
14
1
Energy
Saver
Press this button to run "Power Saving" mode. If water
drops are formed, turn o “Power Saving” mode.
2
Freezer
(Hold 3 seconds for
Power Freeze mode)
Press this button to set the temperature of the freezer
from -15 °C to -23 °C.
Press and hold this button for 3 seconds to activate
"Power Freeze" mode.
3
Alarm
(Hold for 3 seconds
to reset the Filter
Cycle)
Press this button to hear a warning sound when the
refrigerator door is open for 3 minutes or more.
After replacing the water filter, press and hold this
button for 3 second
4
Lighting
(Hold for 3 seconds
to change between
°C °F)
Press this button to keep the dispenser light on.
Press and hold this button for 3 seconds to change the
units of the temperature display to Fahrenheit (°F) or
Centigrade (°C).
5
Fridge
(Hold for 3 seconds
for Power Cooling
mode)
Press this button to set the temperature of the fridge
from 7 °C to 1 °C.
Press and hold this button for 3 seconds to activate
"Power Cool" mode
6
Ice O
(Hold for 3 seconds
for Child Lock mode)
Press this button to stop the ice maker from making
any more ice.
Press and hold this button for 3 seconds to activate
"Child Lock" mode.
DA68-02942A-05.indb 6 2018. 7. 31. �� 2:35
English - 7
7
Sparkling
Water
(Hold for 3 seconds
to reset the cylinder.)
Press this button to select the sparkling water option
for the dispenser. If you press this button again, the
sparkling water concentration setting is changed.
(Level. 2 Level. 3 Level. 1 Level. 2)
After replacing the CO
2
cylinder, press and hold this
button for 3 seconds.
Press and hold this button for 3 seconds to start the
sparkling water production(Re-fill).
8
Cubed/
Crushed
Press this button to select the shape of the ice. (Cubic/
Crushed)
Press and hold this button for 3 seconds to turn the
sparkling water maker on or o.
9 Ice O
If you press the (6) "Ice O" button, the icon is lit on the
display and no more ice is created.
10 Filter
When the water filter needs to be replaced, the
corresponding icon is lit red.
If you replace the water filter and press and hold the
Alarm button for 3 seconds, the icon is turned o.
11
Cubed Ice/
Crushed Ice
The selected shape of the ice by the (8) "Cubed/
Crushed" button is displayed on the display panel as
shown below.
Cubed Crushed
12
Sparkling
Icon
If the sparkling water option is selected by pressing the
(7) "Sparkling Water" button, the corresponding icon is
displayed.
13
Sparkling
Water
Concentration
Icon
If the sparkling water concentration is selected by the
"Sparkling Water" button, the selected concentration
level is represented by the corresponding icon.
( : High, : Medium, : Low)
14
Sparkling
Water Maker
O Icon
Press and hold the (8) "Cubed/Crushed" button for 3
seconds to turn the sparkling water maker on or o.
When the sparkling water maker is o, the
corresponding icon is lit on the display panel.
DA68-02942A-05.indb 7 2018. 7. 31. �� 2:35
English - 8
5. FAQ – Sparkling Water Dispenser
(1) "I pressed the Ice/Sparkling lever but ice is dispensed instead of sparkling water."
[ Procedures to dispense sparkling water ]
1. Is the ice ( , ) selected on the display panel?
2. If the ice icon has been selected, press the "Sparkling Water" button to select the sparkling
water option ( ) and then press the "Ice/Sparkling" lever.
(2) "I pressed the Ice/Sparkling lever but no sparkling water is dispensed."
[ Producing / O ]
1. Press the "Sparkling Water" button and then try again.
2. Check if the numbers ( ) next to the sparkling water icon are blinking. If they are, it means
that sparkling water is being produced. While sparkling water is being produced, no sparkling
water is dispensed. When the sparkling water production is complete, the numbers stop
blinking and you can dispense sparkling water.
3. If there is no blinking icon on the display panel, check if the ( ) icon is displayed over the
sparkling water icon. This indicates that the sparkling water tank is empty but the automatic
sparkling water production function is turned o so that sparkling water is not being produced.
To produce sparkling water, press and hold the "Sparkling Water" button for 3 seconds to reset
the cylinder and start the production.
4. If sparkling water is not yet coming out, the CO
2
cylinder may be empty. In this case, replace
the CO
2
cylinder.
After replacing the CO
2
cylinder, press and hold the "Sparkling Water" button for 3seconds to
reset the CO
2
cylinder. Then, sparkling water is produced.
A. Check if the refrigerator door is open.
- When the refrigerator door is open, the sparkling water, water and ice dispenser functions
do not work. Therefore, close the door to use the function.
B. Check if the Child Lock function ( ) is enabled.
- When the Child Lock function is enabled, the sparkling water, water and ice dispenser
functions do not work. To disable or enable the Child Lock function, press and hold the Ice
O button for 3 seconds.
(3) "The CO
2
gas concentration of the produced sparkling water is too low"
[CO
2
concentration control 1]
1. If the concentration setting was or , change the setting to or for producing
sparkling water the next time. ( : Low, : Medium , : High)
Note that the changed concentration setting is only applied to the subsequent production.
2. If the configured concentration was set to the high level (for example, the concentration level
was ) but the concentration of the produced sparkling water is low, the CO
2
gas in the CO
2
cylinder may be empty.
In this case, replace the CO
2
cylinder. After replacing the CO
2
cylinder, press and hold the
"Sparkling Water" button for 3 seconds to reset the CO
2
cylinder.Then, sparkling water is
produced.
DA68-02942A-05.indb 8 2018. 7. 31. �� 2:35
English - 9
(4) "The CO
2
gas concentration of the produced sparkling water is too high."
[CO
2
concentration control 2]
1. If the concentration setting was or , change the setting to or for producing
sparkling water the next time. ( : Low, : Medium , : High)
Note that the changed concentrating setting is only applied to the subsequent production.
2. Set the concentration setting to a low level when producing sparkling water the next time and
try to produce sparkling water after emptying the sparkling water tank.
- To empty the sparkling water tank, select the "Sparkling O" option and dispense all the
remaining sparkling water. After emptying the sparkling water, press and hold the "Sparkling
Water" button for 3 seconds to reset the cylinder and activate the sparkling water maker.
Did you reset the cylinder by pressing the "Sparkling Water" button and holding for 3
seconds? If there was still water in the tank before sparkling water is produced, sparkling
water of a higher concentration than configured may be produced. However, once the
sparkling water tank is emptied, sparkling water at the configured concentration will be
produced.
(5) "I changed the CO
2
gas concentration level but the level of the produced sparkling
water didn’t change." [CO
2
concentration control 3]
1. If you change the concentration level, the new level is applied to the subsequent production.
That is, the change does not aect the sparkling water in the sparkling water tank nor does
it aect the sparkling water production currently in progress.The change is only applied to
subsequent productions.
2. To produce sparkling water at the precise configured concentration level, empty the sparkling
water tank, set the concentration to the desired level and then produce sparkling water.
- To empty the sparkling water tank, select the “Sparkling O” option and dispense all the
remaining sparkling water. After emptying the sparkling water tank, press and hold the
"Sparkling Water" button again for 3 seconds to reset the cylinder and start the sparkling
water maker.
If there was still water in the tank before sparkling water is produced, sparkling water of a
higher concentration than configured may be produced. You have to empty the sparkling
water tank completely to produce sparkling water at the configured CO
2
concentration.
(6) "I replaced the depleted CO
2
cylinder with a new CO
2
cylinder but no sparkling water is
being produced.:" [ Replacing the cylinder]
1. After replacing the CO
2
cylinder, be sure to press and hold the "Sparkling Water" button for 3
seconds to reset the CO
2
cylinder.
Only after the CO
2
cylinder is reset, is sparkling water being produced.
(7) "Sparkling water suddenly stops being dispensed even though the operation is still in
progress." [ No sparkling water ]
DA68-02942A-05.indb 9 2018. 7. 31. �� 2:35
English - 10
1. Check if the numbers ( ) next to the sparkling water icon are blinking. If they are blinking, it
indicates that the sparkling water tank is being emptied and sparkling water is being produced.
When the production is complete, you can enjoy drinking sparkling water.
2. If there is no blinking icon on the display panel, check if the ( ) icon is displayed over the
sparkling water icon.
This indicates that the sparkling water tank is empty but the automatic sparkling water
production function is turned o so that sparkling water is not being produced. To produce
sparkling water, press and hold the "Sparkling Water" button for 3 seconds to reset the cylinder
and start the production.
(8) "I pressed the “Sparkling O” button but sparkling water continues to be dispensed."
[Sparkling O vs. Sparkling Water]
1. Even if you press the Sparkling O button, sparkling water is dispensed for as long as there is
sparkling water in the sparkling water tank.
2. If you do not use the sparkling water maker for an extended period of time, stop the automatic
sparkling water production function and remove the sparkling water through the dispenser.
(9) "Not enough water is entering…" [ Water supply]
1. Please check if the tap water faucet or valve is closed or the hose is bent and that water is
supplied normally. If the tap water pressure is too low, the sparkling water maker may not work
properly as there is insucient water supply to the sparkling water tank.
2. When the water is supplied to the sparking water tank from a water purifier, sparkling water
may not be produced properly because too much water is required for a short period of time.
It is recommended not dispensing water from a water purifier while starting to make sparkling
water. (up to 5 minutes)
3. If the problem continues, please contact the water purifier manufacturer or ask a plumber to
increase the tap water pressure to a normal level.
(10) "The sparkling water is not cold enough and tastes flat.…"
[ Sparkling Water Taste and Temperature Management]
1. If you continuously produce a lot of sparkling water, you may not be able to enjoy the true taste
of sparkling water because there is too little time to cool the water. To drink sparkling water at
its optimal state, you have to ensure sucient cooling time when you dispense sparkling water.
2. It is recommended dispensing sparkling water at least 4 hours after connecting the tap water to
the refrigerator.
(11) "I pressed the Sparkling O button but the sparkling water maker is not turned o."
[ Turning o the function while producing]
1. Check if the numbers ( ) next to the sparkling water icon are blinking. If they are blinking, it
indicates that sparkling water is being produced and cannot be stopped immediately.
However, if you press and hold the "Sparkling O" button for 3 seconds during the production,
then the OFF icon over the Sparkling icon will be activated and it will stop the auto sparkling
water making operation from next time on.
DA68-02942A-05.indb 10 2018. 7. 31. �� 2:35
English - 11
(12) "I cannot change the gas concentration of the sparkling water."
[ The concentration control function is disabled during a production]
1. Check if the numbers ( ) next to the sparkling water icon are blinking. If they are blinking,
it indicates that sparkling water is being produced. Since the sparkling water concentration
cannot be changed during a production operation, change the concentration level when the
production is complete and the blinking stops. Sparkling water at the configured concentration
level will be produced the next time.
(13) “Sparkling water is produced continuously.” [The refrigerator door is open or the
sparkling water production time has not been reached.]
1. Has the sparkling water production time been reached?
- The time when sparkling water is generated is determined by the configured concentration.
(Level 1: Approx. 10 mins; Level 2: Approx. 20 mins; Level 3: Approx. 30 mins)
- Please wait until the sparkling water production time has been reached.
2. Check if the refrigerator door is open.
- If the refrigerator door is open, the sparkling water maker stops to prevent noise that is
generated by the sparkling water production.
- For this reason, the time during which sparkling water is produced may be extended according
to the configured concentration.
- Close the refrigerator door and wait until the sparkling water production time has been reached.
DA68-02942A-05.indb 11 2018. 7. 31. �� 2:35
English - 12
6. Optimum Operating Environment
Item Descriptions
[Water temperature]
“It is recommended that
you only drink sparkling
water after suciently
cooling it.
Since the temperature of the sparkling water greatly aects the
taste of the water, if the temperature of water is not suciently low,
you may not be able to get the right taste of the sparkling water.
It is generally recommended dispensing sparkling water by pressing
and holding the "Sparkling Water" button for 3 seconds to reset the
cylinder and start producing sparkling water at least 4 hours after
connecting the tap water.
Additionally, when you produce sparkling water, it is recommended
producing sparkling water without dispensing too much Still Water
so that sparkling water is produced with cold water.
If you drink 0.5 gallons (2 liters) or more a day, the water may not
be cooled suciently.
After producing sparkling water, it is recommended putting the
sparkling water in an air-tight container and keeping it cold for
better taste.
[CO
2
concentration of
sparkling water 1]
“To ensure a precise
CO
2
concentration, it is
helpful to dispense all
the remaining sparkling
water before producing
sparkling water.
Since the current system does not produce sparkling water by
considering the CO
2
gas in the remaining sparkling water in the
sparkling water tank, even if you've changed the concentration
level, the resulting concentration may dier depending on the
remaining sparkling water in the sparkling water tank.
If you haven't used the sparkling water function for an extended
period of time (one week or longer), it is helpful to first remove all
the sparkling water and then re-produce sparkling water in order to
improve the quality of the sparkling water.
On the contrary, if you want a higher CO
2
concentration of sparkling
water (higher than level 3),you can increase the concentration by
pressing and holding the "Sparkling Water" button for 3 seconds to
reset the cylinder and start the sparkling water production.
[CO
2
concentration of
sparkling water 2]
“To maintain a precise
CO
2
concentration of
sparkling water, replace
the CO
2
cylinder before
it is depleted.
If the time when to replace the CO
2
cylinder comes closer, the
CO
2
concentration decreases and the water extraction becomes
weaker.
DA68-02942A-05.indb 12 2018. 7. 31. �� 2:35
English - 13
Item Descriptions
[Preparing sparkling
water – Capacity]
“If you want to have
sucient sparkling water
prepared in the morning,
it is recommended
pressing and holding
the "Sparkling Water"
button for 3 seconds to
reset the cylinder and
start the sparkling water
production before going
to bed after drinking
sparkling water."
If you do not press and hold the "Sparkling Water" button for
3 seconds to reset the cylinder and start the sparkling water
production, the amount of sparkling water in the water tank may be
less than the maximum production capacity of 1.2 liters.
Since a production time of 10~30min is required if you need 1.2
liters or more of sparkling water, it is recommended producing
and storing enough sparkling water in advance or at least securing
the maximum sparkling water capacity of 1.2 liter by pressing and
holding the "Sparkling Water" button for 3 seconds to reset the
cylinder and start the sparkling water production.
[The water supply
pressure and water
taste]
“If the water purifier
is connected to the
refrigerator, please do
not dispense water from
the water purifier when
the sparkling water
production begins.
(for 5 minutes)
When connecting tap water, check if the tap water faucet is
properly opened or the hose is not bent
If the water purifier is connected to the refrigerator, there may be
insucient water supply for the sparkling water production.
If there is insucient water supply, the concentration of the
sparkling water increases or the amount of sparkling water may
decrease.
DA68-02942A-05.indb 13 2018. 7. 31. �� 2:35
English - 14
memo
DA68-02942A-05.indb 14 2018. 7. 31. �� 2:35
English - 15
memo
DA68-02942A-05.indb 15 2018. 7. 31. �� 2:35
DA68-02942A-05.indb 16 2018. 7. 31. �� 2:35
Refrigerador con dispensador de agua con gas
Guía rápida de usuario
CONTENIDO
1. Obtenga un cilindro de CO
2
Sodastream™
2. Instalación del cilindro de CO
2
3. Uso del dispensador de agua con
gas
4. Uso del visor
5. Preguntas frecuentes: Dispensador
de agua con gas
5. Entorno operativo óptimo
DA68-02942A-05.indb 1 2018. 7. 31. �� 2:35
Español - 2
1. Obtenga un cilindro de CO
2
Sodastream™
Para accionar su dispensador de agua con gas, consiga un cilindro de CO
2
de 60 L Sodastream™ en
un establecimiento cercano. ¡GRATIS!
Visite www.SodaStreamUSA.com/samsung (Estados Unidos), www.SodaStream.ca/Samsung
(Canadá), www.SodaStream.com.au (Australia) o www.SodaStream.co.nz (Nueva Zelanda) para
conocer los puntos de venta de SodaStream y obtener más información. (uno por cliente)
2. Instalación del cilindro de CO
2
1. Abra la tapa del cilindro de CO
2
.
La fábrica de agua con gas se encuentra apagada por defecto. Es por ello que el
ícono “OFF” (Apagado) del visor se encuentra encendido.
2. Conecte el cilindro de CO
2
al regulador. Gire el cilindro de CO
2
en el sentido de las
agujas del reloj para instalarlo.
Debe utilizar un cilindro de CO
2
Sodastream (60 L).
Puede encontrar cilindros de reemplazo SodaStream en más de 10.000
establecimientos. (Estados Unidos/Canadá)
Puede reemplazar o rellenar los cilindros SodaStream en los comerciantes
minoristas locales. (Australia/Nueva Zelanda)
Visite para obtener más información.
Envuelva el cilindro usado y devuélvalo a la persona que le entrega el cilindro nuevo en
Estados Unidos y Canadá. En Australia y Nueva Zelanda, devuelva el cilindro de CO
2
en el
mostrador de servicio o información del comerciante minorista para reemplazarlo o rellenarlo.
Todos los costos relacionados con el rellenado o el reemplazo del cilindro de CO
2
corren a
cuenta del propietario del refrigerador.
EE. UU. www.SodaStreamUSA.com/samsung
Canadá www.SodaStream.ca/Samsung
Australia www.SodaStream.com.au
Nueva Zelanda www.SodaStream.co.nz
Colombia Web: http://sodastream.com.co/
Facebook: http://www.facebook.com/SodaStreamColombia
Teléfono: +57 1 794 8207
Teléfono celular: +57 318 728 8202
México Web: www.sodastream.com.mx
Facebook : “http://www.facebook.com” y buscar con palabra clave “Soda Stream México”
Teléfono: +52 55 5357 3767
Chile Web: http://www.sodastream.cl
Teléfono: +56 2 2946 5405
Brasil Web: http://www.sodastream.eco.br/cilindros-de-gas.html
Teléfono: 0800 772 8292
Sudáfrica Web: www.sodastream.co.za
Correo electrónico: customer[email protected]
Teléfono: +2712-345-9220
DA68-02942A-05.indb 2 2018. 7. 31. �� 2:35
Español - 3
La rosca del cilindro de CO
2
es distinta según el país.
3. Presione el cilindro de CO
2
de manera tal que quede totalmente instalado dentro del
compartimiento para el cilindro.
4. Para trabar el cilindro de CO
2
, presione la palanca de seguridad hacia abajo.
Es posible que la palanca esté dura debido a la presión interna del cilindro de
CO
2
. En ese caso, sostenga la palanca como se muestra en la figura de la
derecha y presiónela hacia abajo con firmeza.
Si no traba el cilindro de CO
2
, la fábrica de agua con gas no funcionará.
Si el cilindro de CO
2
no se encuentra bien conectado al regulador, puede haber
pérdidas de gas CO
2
que producen un sonido sibilante. En ese caso, repita los
pasos 2, 3 y 4 para instalar el cilindro de CO
2
adecuadamente.
5. Por defecto, la concentración de agua con gas viene configurada en '2'. Presione el botón
“Sparkling Water” (Agua con gas) para configurar la concentración en el nivel deseado y
mantenga dicho botón presionado durante 3 segundos para restablecer el cilindro de CO
2
. Una
vez restablecido el cilindro de CO
2
, se produce agua con gas.
Para producir agua con gas, el tanque de agua con gas se llena con agua y el gas CO
2
se
inyecta según la concentración configurada.
Para quitar las sustancias extrañas que pueda haber en el tanque de agua con gas, deseche
los primeros 1,2 L de agua con gas.
No se dispensa agua con gas cuando está produciéndose. Cuando los números ( ) junto
al ícono de agua con gas dejan de parpadear, se puede dispensar agua con gas.
Presione por 3 segundos
Para desinstalar el cilindro de CO
2
, siga los pasos 1 a 4 anteriores en orden inverso.
Si el agua con gas es producida cuando la temperatura interna del refrigerador o la temperatura
del cilindro de CO
2
es alta, puede escuchar un sonido de corneta.
Cuando encienda el refrigerador por primera vez, no debe generar agua con gas sino hasta
despues de aproximadamente 2 horas Cuando compre un nuevo cilindro de CO
2
, asegurese de
almacenarlo en un lugar fresco y seco hasta que este listo para instalarlo 23 ~ 68 °F (-5 ~ 20 °C).
Si el cilindro es almacenado a temperaturas mayores, puede generar presion interna extra, lo cual
puede crear sonidos de corneta cuando se produzca el agua con gas.
DA68-02942A-05.indb 3 2018. 7. 31. �� 2:35
Español - 4
3. Uso del dispensador de agua con
gas
NOTA
Si presiona la palanca "Water" (Agua), el refrigerador dispensará
agua normal, independientemente de la configuración del agua
con gas.
Si presiona la palanca "Ice/Sparkling" (Hielo/Agua con gas),
el refrigerador dispensará agua con gas o hielo según la
configuración. (Si selecciona el botón “Sparkling Water” (Agua
con gas), aparecerá el ícono de agua con gas y se apagará el
ícono del hielo seleccionado anteriormente).
Si no hay agua con gas en el tanque de agua con gas, la fábrica
de agua con gas está en funcionamiento o el cilindro de CO
2
está vacío, el refrigerador no dispensará agua con gas aunque
presione la palanca.
- Mientras se produce el agua con gas, los números junto al
ícono de agua con gas parpadean.
Si se consume el gas CO
2
del cilindro, la densidad del gas CO
2
en el agua con gas producida puede ser muy baja. En ese
caso, reemplace el cilindro de CO
2
por otro nuevo. Después
de remplazar el cilindro de CO
2
, debe mantener presionado el
botón "Sparkling Water" (Agua con gas) durante 3 segundos
para restablecer el cilindro y comenzar la producción de agua
con gas.
Si mantiene presionado el botón "Sparkling Water" (Agua con gas) durante 3 segundos, el cilindro
se restablece e inmediatamente se produce el agua con gas. En ese caso, la cantidad de la
inyección de gas CO
2
aumenta y el CO
2
del agua con gas puede ser elevado.
Si mantiene presionado el botón Cubed/Crushed (Cubos/Triturado) durante 3 segundos cuando
el módulo de agua con gas está en la posición ‘o’ (apagado) (el ícono ‘o’ sobre el ícono de
agua con gas está encendido), la fábrica de agua con gas comenzará a producir agua con gas de
inmediato.
Si planea no utilizar la fábrica de agua con gas por un período de tiempo prolongado, mantenga
presionado el botón Cubed/Crushed (Cubos/Triturado) durante 3 segundos para apagar la fábrica
de agua con gas. El refrigerador seguirá dispensando agua con gas mientras haya agua con gas
en el tanque de agua con gas, incluso cuando detenga la fábrica de agua con gas. (Detener la
fábrica de agua con gas significa deshabilitar la función de producción automática de agua con
gas).
DA68-02942A-05.indb 4 2018. 7. 31. �� 2:35
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Samsung RF31FMESBSL Guide de démarrage rapide

Taper
Guide de démarrage rapide
Ce manuel convient également à