Yamaha RX-V385 Le manuel du propriétaire

AV Receiver

Owner's Manual

• This unit is a product for enjoying video and music at home.

• This manual explains preparations and operations for everyday users of the unit.

• Read the supplied booklet “Quick Start Guide” before using the unit.

EN

CONTENTS

BEFORE USING THE UNIT 6

How to use this manual............................................................................ 6

How to use this manual......................................................................................................................................................... 6

Checking the accessories.......................................................................... 6

Checking the accessories...................................................................................................................................................... 6

Using the remote control......................................................................... 6

Insert the batteries in the remote control....................................................................................................................... 6

Operating range of the remote control........................................................................................................................... 6

FEATURES 7

What you can do with the unit................................................................. 7

Part names and functions......................................................................... 9

Part names and functions of the front panel................................................................................................................. 9

Part names and functions of the front display............................................................................................................ 10

Part names and functions of the rear panel................................................................................................................. 11

Part names and functions of the remote control....................................................................................................... 12

PREPARATIONS 13

1 Connecting speakers........................................................................ 13

Names and functions of speakers.................................................................................................................................... 13

Speaker systems and speakers to be connected....................................................................................................... 14

Speaker requirements.......................................................................................................................................................... 14

Setting the speaker impedance....................................................................................................................................... 15

Cable requirements.............................................................................................................................................................. 15

How to connect speakers................................................................................................................................................... 15

How to place speakers (speaker systems).................................................................................................................... 17

Connecting front speakers that support bi-amp connections............................................................................. 20

2 Connecting a TV................................................................................ 21

HDMI connection with a TV............................................................................................................................................... 21

VIDEO (composite video) connection with a TV........................................................................................................ 21

3 Connecting playback devices.......................................................... 22

HDMI connection with a video device such as a BD/DVD player......................................................................... 22

Connection other than HDMI with a playback device............................................................................................. 22

Connecting to the jack on the front panel................................................................................................................... 23

4 Connecting the FM/AM antennas.................................................... 24

Connecting the FM/AM antennas................................................................................................................................... 24

5 Plugging in the power cable............................................................ 24

Plugging in the power cable............................................................................................................................................. 24

6 Selecting the on-screen menu language........................................ 25

Selecting the on-screen menu language...................................................................................................................... 25

7 Configuring the necessary speaker settings.................................. 26

Assigning speaker configuration..................................................................................................................................... 26

Optimizing the speaker settings automatically (YPAO).......................................................................................... 27

Error messages from YPAO................................................................................................................................................ 29

Warning messages from YPAO......................................................................................................................................... 30

ENJOYING SOUND 31

Enjoying sound field effects.................................................................. 31

Select your favorite sound mode..................................................................................................................................... 31

Enjoying sound field effects (CINEMA DSP)................................................................................................................. 31

Enjoying sound field effects optimized for the type of content........................................................................... 31

Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 32

Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 32

Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 32

Enjoying unprocessed playback............................................................ 33

Enjoying original sound (straight decode)................................................................................................................... 33

Enjoying multichannel playback without sound field effects (surround decoder)....................................... 33

Enjoying pure high fidelity sound (direct playback)................................................................................................. 34

Enjoying enhanced bass sound............................................................. 34

Enhancing the bass (Extra Bass)....................................................................................................................................... 34

Enjoying enhanced compressed music................................................. 35

Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 35

En

2

PLAYBACK 36

Basic playback procedure...................................................................... 36

Basic procedure for playing back video and music................................................................................................... 36

Switching information on the front display................................................................................................................. 37

Item names and functions of the playback screen.................................................................................................... 38

Item names and functions of the browse screen....................................................................................................... 39

Listening to FM/AM radio....................................................................... 40

Setting the frequency steps............................................................................................................................................... 40

Selecting a frequency for reception............................................................................................................................... 41

Selecting a preset station................................................................................................................................................... 42

Registering radio stations automatically (Auto Preset)........................................................................................... 42

Registering a radio station manually.............................................................................................................................. 43

Clearing preset stations....................................................................................................................................................... 44

Displaying the Radio Data System information......................................................................................................... 44

Receiving traffic information automatically................................................................................................................ 45

Playing back music stored on a Bluetooth® device.............................. 46

Connecting a Bluetooth® device (pairing).................................................................................................................... 46

Playback of Bluetooth® device contents....................................................................................................................... 47

Enjoying audio using Bluetooth® speakers/headphones....................................................................................... 48

Playing back music stored on a USB storage device............................ 49

Playback of USB storage device contents..................................................................................................................... 49

Useful playback functions...................................................................... 50

SCENE function....................................................................................................................................................................... 50

Configuring playback settings for different playback sources

(Option menu)......................................................................................... 52

Basic operation of the Option menu.............................................................................................................................. 52

Option menu items............................................................................................................................................................... 53

Switching the input source................................................................................................................................................ 53

Adjusting the tone of the audio output........................................................................................................................ 53

Configuring DSP/Surround................................................................................................................................................ 54

Correcting volume differences during playback........................................................................................................ 56

Enabling Lipsync adjustment............................................................................................................................................ 57

Checking information about the video/audio signals............................................................................................. 57

Combining audio of another input source with video of the current input source...................................... 57

Selecting a video source to be output with the selected audio source............................................................ 59

Switching between stereo and monaural for FM radio reception...................................................................... 59

Setting presets for radio stations..................................................................................................................................... 59

Receiving traffic information automatically................................................................................................................ 60

Configuring the repeat setting......................................................................................................................................... 61

Performing pairing with a Bluetooth® device............................................................................................................. 62

Connecting a previously-connected Bluetooth® device......................................................................................... 62

Disconnecting the connection with a Bluetooth® device....................................................................................... 63

Enabling automatic switching of the input source when Bluetooth® connects............................................ 63

CONFIGURATIONS 64

Configuring various functions (Setup menu)....................................... 64

Basic operation of the Setup menu................................................................................................................................ 64

Setup menu items................................................................................................................................................................. 65

En

3

Configuring the speaker settings.......................................................... 67

Setting your speaker system............................................................................................................................................. 67

Setting the use of a subwoofer......................................................................................................................................... 67

Setting the size of the front speakers............................................................................................................................. 67

Setting the use of a center speaker and its size.......................................................................................................... 68

Setting the use of surround speakers and their size................................................................................................. 68

Setting the crossover frequency of the low-frequency components................................................................. 69

Setting the phase of the subwoofer............................................................................................................................... 69

Setting the use of Extra Bass.............................................................................................................................................. 69

Setting the use of Virtual CINEMA FRONT.................................................................................................................... 70

Setting the distance between each speaker and the listening position........................................................... 70

Adjusting the volume of each speaker.......................................................................................................................... 70

Setting the equalizer............................................................................................................................................................ 71

Outputting test tones.......................................................................................................................................................... 71

Configuring the HDMI settings.............................................................. 72

Setting the use of HDMI Control...................................................................................................................................... 72

Setting the output of HDMI audio from the TV speaker......................................................................................... 72

Setting the use of HDMI Standby Through.................................................................................................................. 72

Setting the use of 4K upscaling of the HDMI video signal...................................................................................... 72

Setting the version of HDCP used on the HDMI input jacks.................................................................................. 73

Setting the audio jack used for TV audio input.......................................................................................................... 73

Linking the standby modes of the unit and the TV................................................................................................... 73

Setting the use of ARC......................................................................................................................................................... 73

Setting the use of SCENE link playback......................................................................................................................... 74

Configuring the sound settings............................................................. 75

Setting the broadening effect of the front sound field........................................................................................... 75

Adjusting the broadening effect of the center sound field................................................................................... 75

Adjusting the difference in level between the front and surround sound fields........................................... 75

Adjusting the center localization (broadening effect) of the front sound field.............................................. 75

Setting the use of Monaural Mix...................................................................................................................................... 76

Setting the adjustment method of the Lipsync function....................................................................................... 76

Adjusting the delay of the Lipsync function................................................................................................................ 76

Adjusting the volume of dialogue sound..................................................................................................................... 76

Setting the scale of the volume display........................................................................................................................ 77

Setting the dynamic range adjustment method....................................................................................................... 77

Setting the limit value of the volume............................................................................................................................. 77

Setting the initial volume for when the unit is turned on...................................................................................... 77

Configuring the power supply settings................................................ 78

Setting the amount of time for the auto-standby function................................................................................... 78

Setting the use of the eco mode...................................................................................................................................... 78

Configuring the function settings......................................................... 79

Automatically changing the input source names displayed on the front display......................................... 79

Manually changing the input source names displayed on the front display.................................................. 79

Setting input sources to be skipped when operating the INPUT key................................................................ 80

Adjusting the brightness of the front display............................................................................................................. 80

Preventing accidental changes to the settings.......................................................................................................... 80

Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................... 81

Configuring the Bluetooth® settings..................................................... 82

Setting the use of Bluetooth®............................................................................................................................................ 82

Terminating the connection between a Bluetooth® device and the unit......................................................... 82

Setting the use of the Bluetooth® Standby function................................................................................................ 82

Setting the use of audio transmission to a Bluetooth® device.............................................................................. 83

Connecting the unit to a Bluetooth® device that receives transmitted audio................................................ 83

Configuring the language settings....................................................... 84

Setting the on-screen menu language.......................................................................................................................... 84

Configuring the advanced settings (ADVANCED SETUP menu)......... 85

Basic operation of the ADVANCED SETUP menu....................................................................................................... 85

ADVANCED SETUP menu items........................................................................................................................................ 85

Changing the speaker impedance setting (SP IMP.)................................................................................................. 85

Selecting the remote control ID (REMOTE ID)............................................................................................................. 86

Changing the FM/AM tuning frequency setting (TU)............................................................................................... 86

Switching the video signal type (TV FORMAT)............................................................................................................ 87

Selecting the HDMI 4K signal format (4K MODE)....................................................................................................... 87

Restoring the default settings (INIT)............................................................................................................................... 88

Updating the firmware (UPDATE).................................................................................................................................... 88

Checking the firmware version (VERSION)................................................................................................................... 88

En

4

TROUBLESHOOTING 89

When any problem appears................................................................... 89

If trouble occurs, first check the following:.................................................................................................................. 89

Power, system, or remote control trouble.................................................................................................................... 89

Audio trouble.......................................................................................................................................................................... 91

Video trouble.......................................................................................................................................................................... 94

FM/AM radio trouble............................................................................................................................................................ 95

USB trouble.............................................................................................................................................................................. 95

Bluetooth® trouble................................................................................................................................................................ 96

Error indications on the front display................................................... 97

Error indications on the front display............................................................................................................................. 97

APPENDIX 98

Input/output jacks and cables............................................................... 98

Video/audio jacks.................................................................................................................................................................. 98

Video jacks............................................................................................................................................................................... 98

Audio jacks............................................................................................................................................................................... 98

Glossary................................................................................................... 99

Glossary of audio information........................................................................................................................................... 99

Glossary of HDMI and video information................................................................................................................... 100

Glossary of Yamaha technologies................................................................................................................................. 100

Supported devices and file formats.................................................... 101

Supported Bluetooth® devices....................................................................................................................................... 101

Supported USB devices..................................................................................................................................................... 101

Supported file formats...................................................................................................................................................... 101

Video signal flow.................................................................................. 101

Video signal flow................................................................................................................................................................. 101

Additional information on HDMI......................................................... 102

HDMI Control and synchronized operations............................................................................................................ 102

Audio Return Channel (ARC)........................................................................................................................................... 103

HDMI signal compatibility............................................................................................................................................... 104

Trademarks........................................................................................... 105

Trademarks............................................................................................................................................................................ 105

Specifications........................................................................................ 106

Specifications........................................................................................................................................................................ 106

Default settings.................................................................................... 110

Default settings of the Option menu........................................................................................................................... 110

Default settings of the Setup menu............................................................................................................................. 110

Default settings of the ADVANCED SETUP menu.................................................................................................... 111

En

5

BEFORE USING THE UNIT

How to use this manual

When reading this manual, mind the following items.

• Some features are not available in certain regions.

• Due to product improvements, specifications and

appearance are subject to change without notice.

• This manual mainly explains operations using the

menu displayed on the TV screen. Operations with

the TV screen menu are only available when your TV

is connected to the unit via HDMI.

• This manual explains operations using the supplied

remote control.

Warning:

Indicates precautions for the possibility of death or

serious injury.

Caution:

Indicates precautions for the possibility of minor or

moderate injury.

Notice:

Indicates precautions for use to avoid the possibility of

malfunction/damage to the unit.

Note:

Indicates instructions and supplementary explanations

for optimum use.

Checking the accessories

Check that the following accessories are supplied with

the product.

£ AM antenna £ FM antenna

* One of the above is supplied

depending on the region of

purchase.

£ YPAO microphone £ Remote control

£ Batteries (AAA, R03, UM-4)

(x2)

£ Quick Start Guide

Note

Access the Yamaha Downloads site to download the latest Owner's

Manual and Quick Start Guide.

http://download.yamaha.com/

Using the remote control

Insert the batteries in the remote

control

Insert the batteries the right way round.

Operating range of the remote

control

Point the remote control at the remote control sensor on

the unit and remain within the operating range shown in

the following figure.

Within 6 m (20 ft)

30° 30°

En

6

FEATURES

What you can do with the unit

Supporting 2- to 5.1-channel

speaker system

According to the number of speakers that you are

using, you can enjoy your favorite acoustic spaces in

various styles.

• “Using 5.1-channel system” (p.17)

• “Using 3.1-channel system” (p.18)

• “Using Virtual CINEMA FRONT” (p.19)

Automatically optimizing the

speaker settings (YPAO)

YPAO function detects speaker connections, measures

the distances from them to your listening position by

using YPAO microphone measurement, and then

automatically optimizes the speaker settings, such as

volume balance and acoustic parameters, to suit your

room (YPAO: Yamaha Parametric room Acoustic

Optimizer).

• “Optimizing the speaker settings automatically

(YPAO)” (p.

27)

Enjoying sound field effects with

much presence

The unit is equipped with a variety of sound programs

and surround decoders that allow you to enjoy

playback sources with your favorite sound mode (such

as sound field effect or stereo playback).

• “Enjoying sound field effects (CINEMA

DSP)” (p.31)

• “Enjoying sound field effects optimized for the type of

content”

(p.

31)

• “Enjoying sound field effects without surround

speakers (Virtual CINEMA DSP)” (p.32)

• “Enjoying surround sound with headphones (SILENT

CINEMA)” (p.32)

• “Enjoying original sound (straight decode)” (p.33)

• “Enjoying multichannel playback without sound field

effects (surround decoder)”

(p.

33)

• “Enjoying pure high fidelity sound (direct

playback)” (p.34)

• “Enhancing the bass (Extra Bass)” (p.34)

• “Playing back digitally compressed formats with

enriched sound (Compressed Music

Enhancer)”

(p.

35)

Playing back content of various

devices

A number of HDMI jacks and various input/output jacks

on the unit allow you to connect video devices (such as

BD/DVD players), audio devices (such as CD players),

Bluetooth devices (such as smartphones), game

consoles, USB storage devices, and other devices. You

can play back content of them.

• “Selecting a frequency for reception” (p.41)

• “Playback of Bluetooth

®

device contents”

(p.

47)

• “Playback of USB storage device contents” (p.49)

Useful functions

The unit is equipped with the various useful functions.

The SCENE function allows you to select the input

source and settings registered to the corresponding

scene, such as sound program and Compressed

Music Enhancer on/off, with just one touch. When the

unit is connected to an HDMI Control-compatible TV

with an HDMI cable, you can control the unit (such as

power and volume) with TV remote control operations.

• “Selecting the input source and favorite settings with

one touch (SCENE)”

(p.

50)

• “HDMI Control and synchronized

operations” (p.

102)

• “Audio Return Channel (ARC)” (p.103)

En

7

Useful applications

Application: “AV SETUP GUIDE”

AV SETUP GUIDE is an application that assists

you with cable connections between AV Receiver

and playback devices as well as

AV Receiver

setup. This app guides you through the various

settings such as speaker connections, TV and

playback device connections and selecting the

speaker system.

For details, search for “AV SETUP GUIDE” on the App

Store or Google Play.

En

8

Part names and functions

Part names and functions of the front panel

The part names and functions of the front panel are as follows.

YPAO MIC

INFO

MEMORY

(

PAIRING

)

PRESET

FM AM

TUNING

PHONES

SILENT

CINEMA

VOLUME

AUX

TONE

CONTROL

STRAIGHT

TV

BD

DVD

CD

RADIO

INPUT

PROGRAM

SCENE

AUDIO

USB

DIRECT

dc je fa g h i

l

n p q tr sm o

b k

1

z (power) key

Turns on/off (standby) the unit.

2

Standby indicator

Lights up when the unit is in standby mode under any of

the following conditions.

• HDMI Control is enabled (p.72)

• Standby Through is enabled (p.72)

• Bluetooth Standby is enabled (p.82)

3

YPAO MIC jack

For connecting the supplied YPAO microphone (p.27).

4

Remote control sensor

Receives remote control signals (p.6).

5

INFO key

Selects the information displayed on the front display

(p.37).

6

MEMORY (PAIRING) key

Registers FM/AM radio stations as preset stations (p.42).

Starts pairing with a Bluetooth device by holding down for a

few seconds (p.46).

7

PRESET keys

Select a preset FM/AM radio station (p.42).

8

FM and AM keys

Switch between FM and AM (p.41).

9

TUNING keys

Select the radio frequency (p.41).

:

Front display

Displays information (p.10).

A

DIRECT key

Enables/disables the direct playback mode (p.34).

B

PHONES jack

For connecting headphones.

C

INPUT keys

Select an input source.

D

TONE CONTROL key

Adjusts the level of high-frequency range (Treble) and low-

frequency range (Bass

) individually (p.53).

E

SCENE

keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turns on the unit when it is in

standby mode (p.50

).

F

PROGRAM keys

Select a sound program or a surround decoder (p.31).

G

STRAIGHT key

Enables/disables the straight decode mode (p.33).

H

AUX jack

For connecting devices, such as portable audio players

(p.23).

I

USB jack

For connecting a USB storage device (p.49).

J

VOLUME knob

Adjusts the volume.

En

9

Part names and functions of the front display

The part names and functions of the front display are as follows.

-

R

es

Hi

YPAO

VOL.

PARTY

ZONE

FPR

SBL SB SBR

FPL

VIRTUAL

3 B2 A

LINK

MASTER

2

ENHANCER

ECO

OUT

A

-

DRC

SLEEP

STEREO

TUNED

VOL.

SL

SW

SR

MUTE

1 3 5 6

2 74

98 9A0 B

C

1

HDMI

Lights up when HDMI signals are being input or output.

OUT

Lights up when HDMI signals are being output.

2

Bluetooth indicator

Light up while the unit is connected to a Bluetooth device.

3

CINEMA DSP

Lights up when CINEMA DSP (p.31) is working.

4

SLEEP

Lights up when the sleep timer is on.

5

STEREO

Lights up when the unit is receiving a stereo FM radio

signal.

TUNED

Lights up when the unit is receiving an FM/AM radio station

signal.

6

A-DRC

Lights up when Adaptive DRC (p.56) is working.

7

Volume indicator

Indicates the current volume.

8

ECO

Lights up when the eco mode (p.78) is enabled.

9

Cursor indicators

Indicate the remote control cursor keys currently

operational.

:

Information display

Displays the current status (such as input name and sound

mode name). You can switch the information by pressing

INFO (p.

37

).

A

ENHANCER

Lights up when Compressed Music Enhancer (p.35) is

working.

B

Speaker indicators

Indicate speaker terminals from which signals are output.

A Front speaker (L)

S Front speaker (R)

D Center speaker

F Surround speaker (L)

G Surround speaker (R)

L Subwoofer

C

MUTE

Blinks when audio is temporarily muted.

En

10

Part names and functions of the rear panel

The part names and functions of the rear panel are as follows.

i

a

b

d

e f hg

c

▪ The area around the video/audio output jacks is marked in white

on the actual product to prevent improper connections.

1

HDMI OUT jack

For connecting to an HDMI-compatible TV and outputting

video/audio signals (p.

21). When using ARC, TV audio

signal can also be input through the HDMI OUT jack.

2

HDMI 1–4 jacks

For connecting to HDMI-compatible playback devices and

inputting video/audio signals (p.22).

3

ANTENNA

jacks

For connecting to FM and AM antennas (p.24).

4

Power cable

For connecting to an AC wall outlet (p.24).

5

AV jacks

AUDIO jacks

For connecting to video/audio playback devices and

inputting video/audio signals (

p.22).

6

MONITOR OUT

jack

For connecting to a TV and outputting video signals

(p.21).

7

SUBWOOFER PRE OUT jack

For connecting to a subwoofer (with built-in amplifier)

(p.16).

8

SPEAKERS terminals

For connecting to speakers (p.13).

9

VOLTAGE SELECTOR

(Taiwan, Brazil and Central and South America models

only)

Selects the switch position according to your local voltage

(p.24).

En

11

Part names and functions of the remote control

The part names and functions of the supplied remote control are as follows.

TUNING

PRESET

MUTE

TUNING

MEMORY

TOP MENU

HOME

POP-UP/MENU

DISPLAYRETURN

SETUP

OPTION

ENTER

FM

VOLUME

PROGRAM

AM

STRAIGHT

ENHANCER BASS

USB

BLUETOOTH

INPU T

BD

DVD

TV

CD

S C ENE

RADIO

SLEEP

DIRECT

BLUE

YELLOWGREEN

RED

a

c

b

f

d

e

g

i

j

h

l

m

k

n

1

Remote control signal transmitter

Transmits infrared signals.

2

z (receiver power) key

Turns on/off (standby) the unit.

3

SLEEP key

Pressing this key repeatedly will specify the time (120 min,

90 min, 60 min, 30 min, off), in which the unit switches to

the standby mode.

4

SCENE keys

Switch with one touch between multiple settings set using

the SCENE function. Also, turn on the unit when it is in

standby mode (p.

50

).

5

Sound mode keys

Select a sound mode (p.31).

6

Input selection keys

Select an input source for playback.

7

SETUP key

Displays the setup menu (p.64).

8

Menu operation keys

Operates the menu.

89:AB External device operation keys

Let you perform playback operations when “USB” is

selected as the input source, or control playback of the

HDMI Control-compatible playback device.

Note

▪ The playback devices must support HDMI Control. Some

HDMI Control-compatible devices cannot be used.

▪ You can assign the unit's functions to the RED/GREEN/

YELLOW/BLUE keys (

p.

81).

:

Playback operation keys

Controls playback of the external device.

A

VOLUME keys

Adjust the volume.

B

MUTE key

Mutes the audio output.

C

OPTION key

Displays the option menu (p.52).

D

DISPLAY key

Turns on/off the browse screen, playback screen, etc.

En

12

PREPARATIONS

1 Connecting speakers

Names and functions of speakers

The names and functions of speakers connected to the unit are as follows.

4

1

2

9

5

3

10° to 30° 10° to 30°

Note

Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need

to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker

settings (such as distances) to suit the actual speaker layout.

Speaker type Abbr. Function

Front (L/R)

1/2

Produce front channel sounds (stereo sounds).

Center

3

Produces center channel sounds (such as movie dialogue

and vocals).

Surround (L/R)

4/5

Produce surround channel sounds.

Subwoofer

9

Produces LFE (low-frequency effect) channel sounds and

reinforces the bass parts of other channels.

En

13

Speaker systems and speakers to be connected

Select the speaker layout for the number of speakers that you are using and place the

speakers and subwoofer in your room.

Speaker type

Speaker system

(the number of channels)

5.1 3.1 2.1

Front (L/R) 1/2

  

Center 3

 

Surround (L/R) 4/5



Subwoofer 9

  

Speaker requirements

Speakers and subwoofers to be connected to the unit must meet the following

requirements:

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When

connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For

details, see the following:

– “Setting the speaker impedance” (p.15)

• (Except for U.S.A. and Canada models)

Use speakers with an impedance of at least 6 W.

• Use a subwoofer with built-in amplifier.

Note

▪ Prepare the number of speakers according to your speaker system.

▪ Be sure to connect the front left and right speakers.

En

14

Setting the speaker impedance

(U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting

6-ohm speakers, set the speaker impedance to “6 Ω MIN”.

1

Before connecting speakers, connect the power cable to an AC

wall outlet.

2

While holding down STRAIGHT on the front panel, press z

(power).

(power)

z

STRAIGHT

3

Check that “SP IMP.” is displayed on the front display.

ENHANCER

LINK

ECO

MASTER

OUT

2

-

R

es

Hi

YPAO

VOL.

A

-

DRC

SLEEP

STEREO

PARTY

TUNED

ZONE

3 B2 A

VOL .

FPR

SL

SW

SR

SBL SB SBR

FPL

MUT E VIR TUA L

SP IMP.••8¬MIN

4

Press STRAIGHT to select “6 Ω MIN”.

5

Press z (power) to set the unit to standby mode and remove the

power cable from the AC wall outlet.

You are now ready to connect the speakers.

Cable requirements

Use the following types of commercially-available cables to connect speakers to the

unit:

Speaker cables (the number of speakers

required)

Audio pin cable (for connecting a subwoofer)

–

+

–

+

How to connect speakers

n

Connecting the speaker

Connect a speaker cable between the negative (–) terminal of the unit and the

negative (–) terminal of the speaker, and between the positive (+) terminal of the unit

and the positive (+) unit of the speaker.

Notice

When connecting the speaker cables, take notice of the following:

▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into

the unit's interior which could result in a short circuit or malfunction of the unit.

▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the

speakers.

– Twist the bare wires of the speaker cables firmly together.

– Do not let the bare wires of the speaker cable touch one another.

– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel

and screws).

En

15

Note

▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers.

▪ Be sure to connect the front left and right speakers.

▪ (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers,

set the unit’s speaker impedance to “6

Ω MIN”. For details, see the following:

–

“Setting the speaker impedance” (p.15)

1

Remove approximately 10 mm (3/8”) of insulation from the ends of

the speaker cable, and twist the bare wires of the cable firmly

together.

2

Loosen the speaker terminal.

3

Insert the bare wires of the cable into the gap on the side (upper

right or bottom left) of the terminal.

4

Tighten the terminal.

FRONT

aa

b

d

c

+ (red)

- (black)

This completes the connection.

Note

▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then

confirm that the speaker cables are not short circuited.

▪ (U.S.A., Canada, China, Taiwan, Brazil and Central and South America models only)

When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the

terminal.

FRONT

a

b

Banana plug

n

Connecting the subwoofer

Use an audio pin cable to connect the subwoofer.

Note

Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the

subwoofer.

Audio pin cable

En

16

How to place speakers (speaker systems)

n

Using 5.1-channel system

This is a basic speaker layout recommended for enjoying surround sound.

4

1

2

9

5

3

10° to 30° 10° to 30°

3

45

21

9

En

17

n

Using 3.1-channel system

This is a speaker layout recommended for enjoying stereo sound with a center

speaker. Center channel sound such as movie dialogue and vocals can be clearly

obtained.

1

2

9

3

2

1

9

En

18

n

Using Virtual CINEMA FRONT

This speaker layout is recommended if you cannot place speakers in the back of the

room.

Note

To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the

following:

▪ “Assigning speaker configuration” (p.26)

▪ “Setting the use of Virtual CINEMA FRONT” (p.70)

1

2

9

3

54

3

45

21

9

En

19

Connecting front speakers that support bi-amp

connections

You can connect the front speakers that support bi-amp connections.

To enable the bi-amp function, configure the necessary speaker settings. For details,

see the following:

• “Assigning speaker configuration” (p.26)

• “Setting your speaker system” (p.67)

Notice

▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a

tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp

connections, make sure that the brackets or cables are connected before connecting the speaker

cables.

1 2

The unit (rear)

Note

▪ The following speakers cannot be connected simultaneously.

– Surround speakers

– Bi-amp speakers

▪ The FRONT terminals and SURROUND/BI-AMP terminals output the same signals.

En

20

La page charge ...

Yamaha RX-V385 Le manuel du propriétaire

Yamaha RX-V385 Le manuel du propriétaire

dans d''autres langues

Documents connexes