Miller MJ000000 Le manuel du propriétaire

Taper
Le manuel du propriétaire
OM-282976E 201904
Processes
Description
For product information,
Owner’s Manual translations,
and more, visit
www.MillerWelds.com
Semi-Automatic, Air-Cooled
MIG (GMAW) Welding Gun
MDX Series
File: MIG (GMAW)
MIG (GMAW) Welding
Pulsed MIG (GMAW-P)
Flux Cored (FCAW) Welding
MDX-250
MDX-250 EZ Select
MDX-100
CE
Miller Electric manufactures a full line
of welders and welding-related equipment.
For information on other quality Miller
products, contact your local Miller distributor to receive the latest full
line catalog or individual specification sheets. To locate your nearest
distributor or service agency call 1-800-4-A-Miller, or visit us at
www.MillerWelds.com on the web.
Thank you and congratulations on choosing Miller. Now you can get
the job done and get it done right. We know you don’t have time to do
it any other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior
quality. Like you, his customers couldn’t afford anything less. Miller
products had to be more than the best they could be. They had to be the
best you could buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owners Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety Precautions. They
will help you protect yourself against potential hazards on the worksite.
We’ve made installation and operation quick
and easy. With Miller, you can count on
years of reliable service with proper
maintenance. And if for some reason the unit
needs repair, there’s a Troubleshooting
section that will help you figure out what the
problem is, and our extensive service
network is there to help fix the problem.
Warranty and maintenance information for
your particular model are also provided.
Miller is the first welding
equipment manufacturer in
the U.S.A. to be registered to
the ISO 9001 Quality System
Standard.
Working as hard as you do
every power source from
Miller is backed by the most
hassle-free warranty in the
business.
From Miller to You
Mil_Thank1
201901
TABLE OF CONTENTS
SECTION 1 SAFETY PRECAUTIONS FOR GMAW WELDING GUNS READ BEFORE USING 1......
1-1. Symbol Usage 1.......................................................................
1-2. Arc Welding Hazards 1.................................................................
1-3. Proposition 65 Warnings 2...............................................................
1-4. Principal Safety Standards 2.............................................................
1-5. EMF Information 2.....................................................................
SECTION 2 MESURES DE SÉCURITÉ VISANT LES PISTOLETS DE SOUDAGE GMAW À LIRE AVANT
UTILISATION 3..............................................................................
2-1. Signification des symboles 3.............................................................
2-2. Dangers relatifs au soudage à l’arc 3......................................................
2-3. Proposition californienne 65 Avertissements 4..............................................
2-4. Principales normes de sécurité 4.........................................................
2-5. Informations relatives aux CEM 4.........................................................
SECTION 3 INSTALLATION 5................................................................
3-1. Specifications 5........................................................................
3-2. Duty Cycle And Overheating MDX-100 5..................................................
3-3. Duty Cycle And Overheating MDX-250 6..................................................
3-4. Installing Gun 6........................................................................
SECTION 4 OPERATION 7...................................................................
4-1. Operating The Gun 7...................................................................
4-2. Operating The MDX-250 EZSelect Gun 7...............................................
SECTION 5 MAINTENANCE & TROUBLESHOOTING 8.........................................
5-1. Removing Nozzle, Contact Tip, Gas Diffuser, And Changing Liner For MDX-250 8................
5-2. Removing Nozzle, Contact Tip, Gas Diffuser, And Changing Liner For MDX-100 9................
5-3. Replacing Switch And/Or Neck For MDX-100 Or MDX-250 10..................................
5-4. Routine Maintenance 11.................................................................
5-5. T
roubleshooting
11......................................................................
SECTION 6 PARTS LIST 12...................................................................
WARRANTY
DECLARATION OF CONFORMITY
for European Community (CE marked) products.
MILLER Electric Mfg. LLC, 1635 Spencer Street, Appleton, WI 54914 U.S.A. declares that the
product(s) identified in this declaration conform to the essential requirements and provisions of
the stated Council Directive(s) and Standard(s).
Product/Apparatus Identification:
Product
Stock Number
Miller MDX™ Series – 100A 1770027 thru 1770032
Miller MDX™ Series –250A 1770033 thru 1770045
Miller MDX™ Series EZ‐Select™ – 250A 1770046 thru 1770051
Council Directives:
·2014/35/EU Low voltage
·2011/65/EU Restriction of the use of certain hazardous substances in electrical and electronic equipment
Standards:
IEC 60974-7:2013 Arc welding equipment – Part 7: Torches
Signatory:
_____________________________________ ___________________________________________
David A. Werba
Date of Declaration
MANAGER, PRODUCT DESIGN COMPLIANCE
September 19, 2018
3140015
OM-282976 Page 1
SECTION 1 SAFETY PRECAUTIONS FOR GMAW
WELDING GUNS READ BEFORE USING
SR7 (MIG) 2018-01
Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.
1-1. Symbol Usage
DANGER! Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or ex-
plained in the text.
NOTICE Indicates statements not related to personal injury.
Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-
bols and related instructions below for necessary actions to avoid the
hazards.
1-2. Arc Welding Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the welding power source Owner’s Manual. Read
and follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this equipment. A qualified person is defined as one
who, by possession of a recognized degree, certificate, or
professional standing, or who by extensive knowledge, train-
ing and experience, has successfully demonstrated ability to
solve or resolve problems relating to the subject matter, the
work, or the project and has received safety training to recog-
nize and avoid the hazards involved.
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Always wear dry insulating gloves.
Insulate yourself from work and ground.
Do not touch live electrode or electrical parts.
Replace worn, damaged, or cracked guns or cables.
Turn off welding power source before changing contact tip or gun
parts.
Keep all covers and handle securely in place.
FUMES AND GASES can be hazardous.
Keep your head out of the fumes.
Ventilate area, or use breathing device. The
recommended
way to determine adequate
ventilation
is to sample for the composition and quantity of fumes
and gases to which personnel are exposed.
Read and understand the Safety Data Sheets (SDSs) and the
manufacturer’s instructions for adhesives, coatings, cleaners,
consumables, coolants, degreasers, fluxes, and metals.
MOVING PARTS can injure.
Keep away from moving parts.
Keep away from pinch points such as drive
rolls.
WELDING can cause fire or explosion.
Do not weld near flammable material.
Do not weld on containers that have held com-
bustibles, or on closed containers such as
tanks, drums, or pipes unless they are properly prepared ac-
cording to AWS F4.1 and AWS A6.0 (see Safety Standards).
Watch for fire; keep extinguisher nearby.
Read and understand the Safety Data Sheets (SDSs) and the
manufacturer’s instructions for adhesives, coatings, cleaners,
consumables, coolants, degreasers, fluxes, and metals.
BUILDUP OF GAS can injure or kill.
Shut off compressed gas supply when not in
use.
Always ventilate confined spaces or use ap-
proved air-supplied respirator.
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays
that can burn eyes and skin. Sparks fly off from the
weld.
ARC RAYS can burn eyes and skin.
Wear an approved welding helmet fitted with a proper shade of filter
lenses to protect your face and eyes from arc rays and sparks
when welding or watching (see ANSI Z49.1 and Z87.1 listed in
Safety Standards).
Wear approved safety glasses with side shields under your
helmet.
Use protective screens or barriers to protect others from flash,
glare and sparks; warn others not to watch the arc.
Wear body protection made from durable, flame-resistant material
(leather, heavy cotton, wool). Body protection includes oil-free
clothing such as leather gloves, heavy shirt, cuffless trousers, high
shoes, and a cap.
HOT PARTS can burn.
Allow gun to cool before touching.
Do not touch hot metal.
Protect hot metal from contact by others.
OM-282976 Page 2
NOISE can damage hearing.
Noise from some processes or equipment can
damage hearing.
Check for noise level limits exceeding those
specified by OSHA.
Use approved ear plugs or ear muffs if noise level is high.
Warn others nearby about noise hazard.
WELDING WIRE can injure.
Keep hands and body away from gun tip when
trigger is pressed.
READ INSTRUCTIONS.
Read and follow all labels and the Owner’s
Manual carefully before installing, operating, or
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
Use only genuine replacement parts from the manufacturer.
Perform installation, maintenance, and service according to the
Owner’s Manuals, industry standards, and national, state, and
local codes.
1-3. Proposition 65 Warnings
WARNING: This product can expose you to chemicals in-
cluding lead, which are known to the state of California to
cause cancer and birth defects or other reproductive
harm.
For more information, go to www.P65W
arnings.ca.gov
.
1-4. Principal Safety Standards
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www
.global.ihs.com).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Safe Practices for the Preparation of Containers and Piping for Welding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website: www.glo-
bal.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Com-
bustibles, American Welding Society Standard AWS A6.0, from Global
Engineering
Documents (phone: 1-877-413-5184,
website: www
.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protec-
tion Association, Quincy, MA 02169 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:
www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5NS
(phone: 800-463-6727, website: www.csagroup.org).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
Quincy, MA 02169 (phone: 1-800-344-3555, website: www.nfpa.org).
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910.177 Subpart
N, Part 1910 Subpart Q, and Part 1926, Subpart J, from U.S. Govern-
ment Printing Office, Superintendent of Documents, P.O. Box 371954,
Pittsburgh, PA 15250-7954 (phone: 1-866-512-1800) (there are 10 OS-
HA Regional Offices—phone for Region 5, Chicago, is 312-353-2220,
website: www.osha.gov).
1-5. EMF Information
Electric current flowing through any conductor causes localized electric
and magnetic fields (EMF). The current from arc welding (and allied pro-
cesses including spot welding, gouging, plasma arc cutting, and induc-
tion heating operations) creates an EMF field around the welding circuit.
EMF fields can interfere with some medical implants, e.g. pacemakers.
Protective measures for persons wearing medical implants have to be
taken. For example, restrict access for passersby or conduct individu-
al risk assessment for welders. All welders should use the following pro-
cedures in order to minimize exposure to EMF fields from the welding
circuit:
1. Keep cables close together by twisting or taping them, or using a
cable cover.
2. Do not place your body between welding cables. Arrange cables
to one side and away from the operator.
3. Do not coil or drape cables around your body.
4. Keep head and trunk as far away from the equipment in the
welding circuit as possible.
5. Connect work clamp to workpiece as close to the weld as
possible.
6. Do not work next to, sit or lean on the welding power source.
7. Do not weld whilst carrying the welding power source or wire
feeder.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
If cleared by your doctor, then following the above procedures is recom-
mended.
OM-282976 Page 3
SECTION 2 MESURES DE SÉCURITÉ VISANT LES
PISTOLETS DE SOUDAGE GMAW À LIRE AVANT
UTILISATION
SR7(MIG)_201801_fre
Pour écarter les risques de blessure pour vousmême et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives
aux précautions de sécurité et au mode opératoire.
2-1. Signification des symboles
DANGER! Indique une situation dangereuse qui si on
l’évite pas peut donner la mort ou des blessures graves.
Les dangers possibles sont montrés par les symboles
joints ou sont expliqués dans le texte.
Indique une situation dangereuse qui si on l’évite pas
peut donner la mort ou des blessures graves. Les dan-
gers possibles sont montrés par les symboles joints ou
sont expliqués dans le texte.
AVIS Indique des déclarations pas en relation avec des blessures
personnelles.
Indique des instructions spécifiques.
Ce groupe de symboles veut dire Avertissement! Attention! DANGER
DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES
CHAUDES. Consulter les symboles et les instructions ci-dessous y
afférant pour les actions nécessaires afin d’éviter le danger.
2-2. Dangers relatifs au soudage à l’arc
Les symboles présentés ci-après sont utilisés tout au long du
présent manuel pour attirer votre attention et identifier les ris-
ques de danger. Lorsque vous voyez un symbole, soyez vigilant
et suivez les directives mentionnées afin d’éviter tout danger.
Les consignes de sécurité présentées ci-après ne font que résu-
mer l’information contenue dans les normes de sécurité énumé-
rées dans le manuel d’utilisation du poste de soudage. Veuillez
lire et respecter toutes ces normes de sécurité.
L
’installation,
l’utilisation, l’entretien et les réparations ne
doivent être confiés qu’à des personnes qualifiées. Une
personne qualifiée est définie comme celle qui, par la
possession
d’un diplôme reconnu, d’un certificat ou d’un
statut professionnel, ou qui, par une connaissance, une for-
mation et une expérience approfondies, a démontré avec
succès sa capacité à résoudre les problèmes liés à la tâche,
le travail ou le projet et a reçu une formation en sécurité afin
de reconnaître et d’éviter les risques inhérents.
Au cours de l’utilisation, tenir toute personne à l’écart et plus
particulièrement
les enfants.
UN CHOC ÉLECTRIQUE peut tuer.
Porter toujours des gants secs et isolants.
S’isoler de la pièce et de la terre.
Ne jamais toucher une électrode ou des pièces
électriques
sous tension.
Remplacer les pistolets ou câbles de soudage qui sont endom-
magés, usés ou craquelés.
Mettre la soudeuse hors tension avant de remplacer un bec
contact ou des pièces de pistolet.
S’assurer que tous les couvercles et poignées sont fermement
assujettis.
LES VAPEURS ET LES FUMÉES
peuvent être nocives.
Éloigner sa tête des endroits renfermant des
vapeurs.
Aérer la zone de travail ou porter un appareil respiratoire. Pour dé-
terminer la bonne ventilation, il est recommandé de procéder à un
prélèvement
pour la composition et la quantité de fumées et de gaz
auxquels est exposé le personnel.
Lire et comprendre les fiches de données de sécurité et les instruc-
tions du fabricant concernant les adhésifs, les revêtements, les net-
toyants, les consommables, les produits de refroidissement, les
dégraisseurs,
les flux et les métaux.
LE SOUDAGE peut causer un in-
cendie ou une explosion.
Ne pas souder à proximité de matériaux inflam-
mables.
Ne pas effectuer le soudage sur des conteneurs fermés tels que
des réservoirs, tambours, ou conduites, à moins qu’ils n’aient été
préparés correctement conformément à AWS F4.1 et AWS A6.0
(voir les Normes de Sécurité).
Prendre garde aux incendies et toujours avoir un extincteur à
proximité.
Lire et comprendre les fiches de données de sécurité et les
instructions du fabricant concernant les adhésifs, les revêtements,
les nettoyants, les consommables, les produits de refroidissement,
les dégraisseurs, les flux et les métaux.
L’ACCUMULATION DE VAPEURS
peut causer des lésions ou la mort.
Quand on n’utilise pas le gaz comprimé de pro-
tection, fermer le robinet de la bouteille.
Assurer toujours la ventilation des zones fermées ou utiliser un
appareil respiratoire avec alimentation en air.
Les PIÈCES MOBILES peuvent
causer des blessures.
Ne pas s’approcher des organes mobiles.
Ne pas s’approcher des points de coincement
tels que des rouleaux de commande.
LE RAYONNEMENT DE L’ARC peut
brûler les yeux et la peau.
Le rayonnement de l’arc du procédé de soudage
génère des rayons visibles et invisibles intenses
(ultraviolets et infrarouges) susceptibles de provoquer des brûlures
dans les yeux et sur la peau. Des étincelles sont projetées pendant le
soudage.
Porter un casque de soudage approuvé muni de verres filtrants
approprié pour protéger visage et yeux pendant le soudage
(voir ANSI Z49.1 et Z87.1 énuméré dans les normes de sécurité).
Porter des lunettes de sécurité avec écrans latéraux même sous
votre casque.
OM-282976 Page 4
Avoir recours à des écrans protecteurs ou à des rideaux pour
protéger les autres contre les rayonnements les éblouissements
et les étincelles ; prévenir toute personne sur les lieux de ne pas
regarder l’arc.
Porter un équipement de protection pour le corps fait d’un matériau
résistant et ignifuge (cuir, coton robuste, laine). La protection du
corps comporte des vêtements sans huile comme par ex. des
gants de cuir, une chemise solide, des pantalons sans revers, des
chaussures hautes et une casquette.
LES PIÈCES CHAUDES peuvent
provoquer des brûlures.
Laisser refroidir le pistolet avant de le toucher.
Ne pas toucher d’objets métalliques chauds.
Abriter les objets métalliques contre tout
contact par les personnes à proximité.
Le BRUIT peut endommager l’ouie.
Le bruit des processus et des équipements peut
affecter l’ouïe.
Vérifier si les niveaux de bruit excèdent les lim-
ites spécifiées par l’OSHA.
Utiliser des bouche-oreilles ou des serre-tête antibruit approuvés si
le niveau de bruit est élevé.
Avertir les personnes à proximité au sujet du danger inhérent au
bruit.
LES FILS DE SOUDAGE peuvent
provoquer des blessures.
Éloigner les mains et le corps de la buse du
pistolet après avoir appuyé sur la gâchette.
LIRE LES INSTRUCTIONS.
Lire et appliquer les instructions sur les
étiquettes
et le Mode d’emploi avant
l’installation,
l’utilisation ou l’entretien de
l’appareil.
Lire les informations de sécurité au
début du manuel et dans chaque section.
N’utiliser que les pièces de rechange recommandées par le cons-
tructeur.
Effectuer l’installation, l’entretien et toute intervention selon les
manuels d’utilisateurs, les normes nationales, provinciales et de
l’industrie,
ainsi que les codes municipaux.
2-3. Proposition californienne 65 Avertissements
AVERTISSEMENT : ce produit peut vous exposer à des
produits chimiques tels que le plomb, reconnus par l’État de
Californie comme cancérigènes et sources de malformations
ou d’autres troubles de la reproduction.
Pour plus d’informations, consulter www.P65W
arnings.ca.gov
.
2-4. Principales normes de sécuri
Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org or purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www
.global.ihs.com).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Safe Practices for the Preparation of Containers and Piping for Welding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website: www.glo-
bal.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Com-
bustibles, American Welding Society Standard AWS A6.0, from Global
Engineering
Documents (phone: 1-877-413-5184,
website: www
.global.ihs.com).
National Electrical Code, NFPA Standard 70, from National Fire Protec-
tion Association, Quincy, MA 02169 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky.org).
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:
www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5NS
(phone: 800-463-6727, website: www.csagroup.org).
Safe Practice For Occupational And Educational Eye And Face Protec-
tion, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-
site: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFPA Standard 51B, from National Fire Protection Association,
Quincy, MA 02169 (phone: 1-800-344-3555, website: www.nfpa.org).
OSHA, Occupational Safety and Health Standards for General Indust-
ry, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, auprès du U.S. Government Printing Office,
Superintendent
of Documents, P.O. Box 371954, Pittsburgh, PA
15250-7954 (téléphone : 1-866-512-1800) (il y a 10 bureaux régiona-
ux––le téléphone de la région 5, Chicago, est 3123532220, site Internet
: www.osha.gov).
2-5. Informations relatives aux CEM
Le courant électrique qui traverse tout conducteur génère des champs
électromagnétiques (CEM) à certains endroits. Le courant de soudage
crée un CEM autour du circuit et du matériel de soudage. Le courant
issu d’un soudage à l’arc (et de procédés connexes, y compris le
soudage par points, le gougeage, le découpage plasma et les
opérations
de chauffage par induction) crée un champ
électromagnétique
(CEM) autour du circuit de soudage. Les champs
électromagnétiques
produits peuvent causer interférence à certains
implants médicaux, p. ex. les stimulateurs cardiaques. Des mesures de
protection pour les porteurs d’implants médicaux doivent être prises:
Limiter par exemple tout accès aux passants ou procéder à une
évaluation
des risques individuels pour les soudeurs. Tous les
soudeurs doivent appliquer les procédures suivantes pour minimiser
l’exposition aux CEM provenant du circuit de soudage:
1 Rassembler les câbles en les torsadant ou en les attachant avec
du ruban adhésif ou avec une housse.
2 Ne pas se tenir au milieu des câbles de soudage. Disposer les
câbles d’un côté et à distance de l’opérateur.
3 Ne pas courber et ne pas entourer les câbles autour de votre
corps.
4 Maintenir la tête et le torse aussi loin que possible du matériel du
circuit de soudage.
5 Connecter la pince sur la pièce aussi près que possible de la
soudure.
6 Ne pas travailler à proximité d’une source de soudage, ni
s’asseoir ou se pencher dessus.
7 Ne pas souder tout en portant la source de soudage ou le
dévidoir.
En ce qui concerne les implants médicaux :
Les porteurs d’implants doivent d’abord consulter leur médecin avant
de s’approcher des opérations de soudage à l’arc, de soudage par
points, de gougeage, du coupage plasma ou de chauffage par
induction. Si le médecin approuve, il est recommandé de suivre les pro-
cédures précédentes.
OM-282976 Page 5
SECTION 3 INSTALLATION
3-1. Specifications
Ref 283390-A
Air-Cooled Welding Gun For GMAW, GMAW-P And FCAW Welding
Using gasless flux cored wire and pulsed MIG (GMAW-P) reduces gun duty cycle.
MDX-100 Feeds .023 To .045 in. (0.6 To 1.1 mm) Hard Or Flux Cored Wires
Duty Cycle Rating:
100%: 100 A With CO
2
Shielding Gas;
60%: 100 A With Mixed Gases
Weight With 10 ft (3.0 m) Power Cable: 2.9 lb (1.3 kg)
Identified With On Power Cable
MDX-250 Feeds .023 To .045 in. (0.6 To 1.1 mm) Hard Or Flux Cored Wires
Duty Cycle Rating:
100%: 250 A With CO
2
Shielding Gas;
60%: 250 A With Mixed Gases
Weight With 15 ft (4.6 m) Power Cable: 7.6 lb (3.4 kg)
Identified With On Power Cable (standard)
Identified With On Power Cable (EZ-Select version)
NOTICE Exceeding duty cycle can
damage unit or gun and void warranty.
Overheating
0
15
A or V
OR
Reduce Duty Cycle
Minutes
sduty1 5/95
3-2. Duty Cycle And Overheating MDX-100
Duty Cycle is percentage of 10
minutes that gun can weld at
rated load without overheating.
0
10
Minutes
Definition
Continuous Welding
.023 To .045 in. (0.6 To 1.1 mm)
Hard Or Flux Cored Wires
100% Duty Cycle At 100 Amperes
Using CO
2
.023 To .045 in. (0.6 To 1.1 mm) Hard Or Flux Cored Wires
60% Duty Cycle At 100 Amperes
Using Mixed Gases
6 Minutes Welding 4 Minutes Resting
OM-282976 Page 6
NOTICE Exceeding duty cycle can
damage unit or gun and void warranty.
Overheating
0
15
A or V
OR
Reduce Duty Cycle
Minutes
sduty1 5/95
3-3. Duty Cycle And Overheating MDX-250
Duty Cycle is percentage of 10
minutes that gun can weld at
rated load without overheating.
0
10
Minutes
Definition
Continuous Welding
.023 To .045 in (0.6 To 1.1 mm)
Hard Or Flux Cored Wires
100% Duty Cycle At 250 Amperes
Using CO
2
.023 To .045 in (0.6 To 1.1 mm) Hard Or Flux Cored Wires
60% Duty Cycle At 250 Amperes
Using Mixed Gases
6 Minutes Welding 4 Minutes Resting
3-4. Installing Gun
804465-A
1 Gun Securing Knob
2 Gun End
Loosen knob. Insert gun end until it
bottoms against drive assembly.
Tighten knob.
3 Gun Trigger Plug
Insert into receptacle, and tighten
threaded collar.
See wire feeder manual for wire
threading procedure.
1
3
2
OM-282976 Page 7
SECTION 4 OPERATION
4-1. Operating The Gun
Ref. 283390-A
1 Trigger Switch
Press switch to feed energized wire
and start flow of shielding gas.
1
4-2. Operating The MDX-250 EZSelectt Gun
1 Trigger Switch
Press switch to feed energized wire
and start flow of shielding gas.
2 Program LEDs
The MDX-250 EZ-Select MIG gun
has four LEDs on the gun handle to
indicate which program is selected
when used with a Millermatic 255 or
Multimatic 255. Refer to the system
section in the Millermatic 255 or
Multimatic 255 manual to enable
and disable the EZ-Select feature.
When the EZ-Select feature is dis-
abled on either the Millermatic or
Multimatic
255, LED 1 and LED 4
will be illuminated.
When the EZ Select feature is en-
abled, simply tap the gun trigger to
select the program. The number of
lit LEDs on the gun will indicate the
selected program. This allows the
operator to know which program
that is being used without looking at
the machine.
Tap the trigger once. LED 1 on the
gun will illuminate. Program 1 on the
machine will be selected.
Tap the trigger twice. LEDs 1 and 2
on the gun will illuminate. Program
2 on the machine will be selected.
Tap the trigger three times. LEDs 1,
2, and 3 on the gun will illuminate.
Program 3 on the machine will be
selected.
Tap the trigger four times. LEDs 1,
2, 3, and 4 on the gun will illuminate.
Program 4 on the machine will be
selected.
Ref. 283391-A
1
2
OM-282976 Page 8
SECTION 5 MAINTENANCE & TROUBLESHOOTING
5-1. Removing Nozzle, Contact Tip, Gas Diffuser, And Changing Liner For MDX-250
Ref. 283390-A
! Turn off welding power
source/wire feeder and dis-
connect gun.
1 Power Pin Cap
2 Nozzle
3 Contact Tip
4 Gas Diffuser
5 Neck Insulator
6 Liner
Remove nozzle, contact tip, and
gas diffuser from end of gun as
shown. Remove power pin cap
from power pin. Lay gun out straight
and remove liner.
Blow out gun casing with com-
pressed air if necessary.
Install new liner through the neck
until the brass liner lock bottoms on
neck. Install the gas diffuser and
tighten gas diffuser. Install contact
tip and nozzle. Identify power pin to
determine appropriate power pin
cap torque specification. Thread
power pin cap over liner and torque
to specification determined by pow-
er pin design. Cut liner flush with
power pin cap.
Neck
Tools Needed:
1/2, 11/16, 3/4 in.
D-M250 - 11/16 in.
Thread wire according to
welding power source/wire
feeder manual.
1
4
3
2
1/2 in.
5
6
1
Power Pin
D-MA250 - 3/4 in.
Torque Wrench
Power Pin
84 in lb (9.5 N m)
120 in lb (13.6 N m)
6
OM-282976 Page 9
5-2. Removing Nozzle, Contact Tip, Gas Diffuser, And Changing Liner For MDX-100
Ref. 283390-A
! Turn off welding power
source/wire feeder and dis-
connect gun.
1 Power Pin Cap
2 Nozzle
3 Contact Tip
4 Gas Diffuser
5 Liner
Remove nozzle, contact tip, and
gas diffuser from end of gun as
shown. Remove power pin cap
from power pin. Lay gun out straight
and remove liner.
Blow out gun casing with com-
pressed air if necessary.
Install new liner through the neck
until brass liner lock bottoms on
neck. Install the gas diffuser and
tighten gas diffuser. Install contact
tip and nozzle. Identify power pin to
determine appropriate power pin
cap torque specification. Thread
power pin cap over liner and torque
to specification determined by pow-
er pin design. Cut liner flush with
power pin cap.
Neck
Tools Needed:
1/2 9/16 in.
9/16 in.
Thread wire according to
welding power source/wire
feeder manual.
1
4
3
2
1/2 in.
5
1
Power Pin
Torque Wrench
Power Pin
5
120 in lb (13.6 N m)
84 in lb (9.5 N m)
OM-282976 Page 10
5-3. Replacing Switch And/Or Neck For MDX-100 Or MDX-250
Ref. 283390-A
Tools Needed:
3/4 in.
Socket
for
Strain
Relief
1
3
2
5
6
7
4
Strain Relief
7/64 in.
! Turn off welding power
source/wire feeder and dis-
connect gun.
1 Handle
2 Screw
Remove four screws from handle
and retain for future use.
3 Locking Cap
Rotate locking cap counter
clockwise 1/4 turn to separate
handle halves.
4 Trigger
Remove terminals from trigger
switch and remove housing. Install
new trigger and connect leads
(polarity is not important).
Reassemble in reverse order if you
are not replacing neck.
5 End Fitting
6 Lock Nut
Loosen lock nut on neck by using
wrenches on end fitting and lock
nut. Use 3/4 in. wrenches for
MDX-250 gun and 9/16 in. wrench-
es for MDX-100 gun.
7 Neck
After the lock nut is loose the neck
can be unthreaded from the end
fitting.
Reassemble components in
reverse order. Make sure neck is in
line with the head of the clamp as
shown. Make sure the ball on the
strain relief is positioned in socket in
handle before closing handle
halves.
1
Terminal
Head of Clamp
9/16 in.
OM-282976 Page 11
5-4. Routine Maintenance
! Disconnect power
before maintaining.
Maintain more often
during severe conditions.
= Check = Change = Clean = Replace
* To be done by Factory Authorized Service Agent
Reference
Each
Spool
Of Wire
 Nozzle and contact tip Blow out gun casing
Every
3
Months
Unreadable Labels Damaged Gas Hose  Cords  Cracked Parts
5-5. Troubleshooting
Trouble Remedy
Wire does not feed; wire is not ener-
gized; wire feeds unevenly.
Check contact tip. Check for kinks in gun cable.
Check gun trigger plug connection at welding power source/wire feeder.
Check, and if necessary, replace gun trigger switch (see Section 5-3).
Check contact tip. Check for kinks in gun cable. Blow out liner and gun casing (see Section 5-1 or Section
5-2 )
Weld porosity. Remove weld spatter buildup in nozzle.
Make sure power pin assembly is pushed into gun block correctly on wire feeder.
Check shielding gas flow/supply.
Make sure liner is flush with end of power pin cap and power pin cap is tightened to appropriate torque
specification. (see Section 5-1 or Section 5-2 )
Wire feeding stops or does not feed
properly during welding.
Straighten gun cable and/or replace damaged parts (see Section 5-1 or Section 5-2 )
Adjust drive roll pressure (see wire feeder manual).
Change to proper drive roll groove (see wire feeder manual).
Readjust hub tension (see wire feeder manual).
Clean or replace liner if dirty or plugged (see Section 5-1 or Section 5-2 )
Replace drive roll or pressure bearing if worn or slipping (see wire feeder manual).
OM-282976 Page 12
SECTION 6 PARTS LIST
Ref 283390-A
1
2
3
4
5
6
7
8
8
9
10
11
13
14
15
16
17
19
20
12
18
Figure 6-1. MDX-100 Gun
OM-282976 Page 13
Description
Part
No.
Dia.
Mkgs.
Item
No.
Figure 6-1. MDX-100 Gun
Quantity
1 NS-M1200C Nozzle, AccuLockMDX Copper, ½ in. Bore, Flush 1... ...... .. .....................
1 NS-M1200B Nozzle, AccuLock MDX Brass, ½ in. Bore, Flush 1... ..... .. ........................
1 NS-MFLX Nozzle, AccuLock MDX Gasless 1... ....... .. ......................................
2 T-M023 Contact Tip, AccuLock MDX .023 in. Wire x 1.125 in.... ......... .. .....................
2 T-M030 Contact Tip, AccuLock MDX .030 in. Wire x 1.125 in.... ......... .. .....................
2 T-M035 Contact Tip, AccuLock MDX .035 in. Wire x 1.125 in.... ......... .. .....................
2 T-M045 Contact Tip, AccuLock MDX .045 in. Wire x 1.125 in.... ......... .. .....................
2 T-M047 Contact Tip, AccuLock MDX 3/64 in. Wire x 1.125 in.... ......... .. .....................
3 D-M100 Diffuser, AccuLock MDX 1... .......... .. .............................................
4 LM1A-10 Liner, AccuLock MDX .023/.025 in. Wire x 10 ft 1... ....... .. .........................
4 LM2A-10 Liner, AccuLock MDX .030/.035 in. Wire x 10 ft 1... ......... .. .........................
4 LM3A-10 Liner, AccuLock MDX .035/.045 in. Wire x 10 ft 1... ....... .. .........................
5 1040087 Neck 1... ......... .. ..............................................................
6 1960012 Nut, Locking 1... ......... .. ........................................................
7 7000005 Terminal, Switch 2... ......... .. ....................................................
8 1880266 Handle Kit, (includes Item No.9 and Item No. 11) 1... ......... .. ........................
9 2280065 Screw, Handle 4... ......... .... ....................................................
10 211-5-MDX Trigger, Switch 1... ....... .. .....................................................
11 1780094 Cap, Locking Handle 1... ......... .... ..............................................
12 2520033 Strain Relief, Rear Spring 1... ......... .. ............................................
13 4932 Connector, Butt 2... ............. .. .....................................................
14 GN2021 Control Plug, Miller 1... .......... .. ..................................................
15 2520100 Strain Relief, Rear 1... ......... .. ..................................................
16 2280056 Screw, Strain Relief 1... ......... .. .................................................
17 1620003 Cover, Screw 1... ......... .. .......................................................
18 4478 O-Ring, Power Pin 2... ............. .. ..................................................
19 2200169 Assy, Power Pin 1... ......... .. ....................................................
20 2200170 Power Pin Cap, .023/.030 in. 1... ......... .. .........................................
20 2200171 Power Pin Cap, .030/.045 in. 1... ......... .. .........................................
OPTIONAL
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model is required when ordering parts from your local distributor.
OM-282976 Page 14
Ref 283390-A
1
2
3
4
5
6
7
8
9
9
10
11
12
13
15
16
17
18
19
21
22
9
14
20
Figure 6-2. MDX-250 and MDX-250 EZ-Select Gun
OM-282976 Page 15
Description
Part
No.
Dia.
Mkgs.
Item
No.
Figure 6-2 MDX-250 And MDX-250 EZ Select Gun
Quantity
Std
Model
EZ-
Select
1 N-M1200C Nozzle, AccuLock MDX Copper, ½ in. Bore, Flush 11.. ........... .. ........... .....
1 N-M1218C Nozzle, AccuLock MDX Copper, ½ in. Bore, .125 in. Recess 11.. ......... .. .. .....
1 N-M5800C Nozzle, AccuLock MDX Copper, in. Bore, Flush 11.. ......... .. ........... .....
1 N-M5818C Nozzle, AccuLock MDX Copper, in. Bore, .125 in. Recess 11.. ......... .. .. .....
1 N-M58XTC Nozzle, AccuLock MDX Copper, in. Bore, .125 in. Stickout 11.. ......... .. .. .....
1 N-A5800C Nozzle, AccuLock S Copper, in. Bore, Flush 11.. ........... .. .............. .....
1 N-A5814C Nozzle, AccuLock S Copper, in. Id ¼ in. Recess 11.. .......... .. ........... .....
1 N-A5818C Nozzle, AccuLock S Copper, in. Id in. Recess 11.. .......... .. ........... .....
2 T-M023 Contact Tip, AccuLock MDX .023 in. Wire x 1.125 in... ............ .. .................
2 T-M030 Contact Tip, AccuLock MDX .030 in. Wire x 1.125 in... ............ .. .................
2 T-M035 Contact Tip, AccuLock MDX .035 in. Wire x 1.125 in... ............ .. .................
2 T-M045 Contact Tip, AccuLock MDX .045 in. Wire x 1.125 in... ............ .. .................
2 T-M047 Contact Tip, AccuLock MDX 3/64 in. Wire x 1.125 in... ............ .. .................
2 T-A023CH Contact Tip, AccuLock S .023 in. Wire x 1.125 in... .......... .. ....................
2 T-A030CH Contact Tip, AccuLock S .030 in. Wire x 1.125 in... .......... .. ....................
2 T-A035CH Contact Tip, AccuLock S .035 in. Wire x 1.125 in... .......... .. ....................
2 T-A039CH Contact Tip, AccuLock S .039 in. Wire x 1.125 in... .......... .. ....................
2 T-A045CH Contact Tip, AccuLock S .045 in. Wire x 1.125 in... .......... .. ....................
3 D-M250 Diffuser, AccuLock MDX 1 1.. .............. .. .................................. .....
3 D-MA250 Diffuser, AccuLock S 1 1.. ............ .. ..................................... .....
4 LM1A-10 Liner, AccuLock MDX .023/.025 in. Wire x 10 ft 1 1.. ........... .. .............. .....
4 LM1A-12 Liner, AccuLock MDX .023/.025 in. Wire x 12 ft 1 1.. ........... .. .............. .....
4 LM1A-15 Liner, AccuLock MDX .023/.025 in. Wire x 15 ft 1 1.. ........... .. .............. .....
4 LM2A-10 Liner, AccuLock MDX .030/.035 in. Wire x 10 ft 1 1.. ............. .. .............. .....
4 LM2A-12 Liner, AccuLock MDX .030/.035 in. Wire x 12 ft 1 1.. ............. .. .............. .....
4 LM2A-15 Liner, AccuLock MDX .030/.035 in. Wire x 15 ft 1 1.. ............. .. .............. .....
4 LM3A-10 Liner, AccuLock MDX .035/.045 in. Wire x 10 ft 1 1.. ............. .. .............. .....
4 LM3A-12 Liner, AccuLock MDX .035/.045 in. Wire x 12 ft 1 1.. ............. .. .............. .....
4 LM3A-15 Liner, AccuLock MDX .035/.045 in. Wire x 15 ft 1 1.. ............. .. .............. .....
5 4623R Insulator, Neck 1 1.. ............... .. .......................................... .....
6 1040086 Neck 1 1.. ............. .. .................................................. .....
7 1960011 Nut, Locking 1 1.. ............. .. ............................................ .....
8 7000005 Terminal, Switch 2 2.. ............. .. ......................................... .....
9 1880264 Handle Kit, EZ-Select (includes No.10 and No.13) 0 1.. ............. .. ........... .....
9 1880265 Handle Kit, Standard (includes No.10 and No.13) 1 0.. ............. .. ............ .....
10 2280065 Screw, Handle 4 4.. ............. .... ........................................ .....
11 211-5-MDX Trigger, Switch 1 1.. ........... .. .......................................... .....
12 2620094 PCB Assembly, EZ-Select 0 1.. ............. .. ................................ .....
13 1780099 Cap, Locking Handle 1 1.. ............. .... ................................... .....
14 2520033 Strain Relief, Rear Spring 11.. ............. .. ................................ .....
15 4932 Connector, Butt 2 2.. ................ .. ......................................... .....
16 GN2021 Control Plug, Miller 1 0.. ............. .. ...................................... .....
16 1130059 Electrical Plug, EZ-Select 0 1.. ............. .. ................................. .....
17 2520100 Strain Relief, Rear 1 1.. ............. .. ....................................... .....
18 2280056 Screw, Strain Relief 1 1.. ............. .. ...................................... .....
19 1620003 Cover, Screw 1 1.. ............. .. ........................................... .....
20 4478 O-Ring, Power Pin 22.. ................ .. ....................................... .....
21 2200169 Assy, Power Pin 1 1.. ............. .. ......................................... .....
22 2200170 Power Pin Cap .023/.030 in. 1 1.. ............. .. .............................. .....
22 2200171 Power Pin Cap .030/.045 in. 1 1.. ............. .. .............................. .....
OPTIONAL
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
Notes
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Miller MJ000000 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues