Miele 41CAE035USA Le manuel du propriétaire

Catégorie
Aspirateurs
Taper
Le manuel du propriétaire

Ce manuel convient également à

en Operating Instructions Vacuum Cleaner
fr Instructions d'utilisation Aspirateur
SCAE0
M.-Nr. 10 086 010
HS10
2
IMPORTANT SAFETY INSTRUCTIONS
Guide to the vacuum cleaner
Before using the vacuum cleaner
Using the included accessories
Use
Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Unwinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the vacuum on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Opening the air inlet valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
While vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parking, transport and storage
Maintenance and care
Purchasing new filter bags and filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Which filter bags and filters are the right ones? . . . . . . . . . . . . . . . . . . . . . . . . . . 14
When to change the filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to change the filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When should I change the dust compartment filter?. . . . . . . . . . . . . . . . . . . . . . . 15
Replacing the dust compartment filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When to change the exhaust filter? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to replace the AirClean exhaust filter?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
How do I change the Active AirClean 50 or the HEPA AirClean 50 exhaust filter? 16
Exchanging exhaust filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
When to change the thread catcher of the floor brush AllTeQ
(depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Replacing the thread catchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning and care
Frequently asked questions
Technical service
Optional accessories
Caring for the environment
LIMITED WARRANTY - VACUUM CLEANERS USA ...................20
3
en - Contents
4
Only Miele FilterBags, filters and accessories with
the "Original Miele" logo can be used with this
vacuum. Only then can the suction power of the
vacuum cleaner reach its optimum potential creating
the best possible cleaning results.
USE OF NON-MIELE COMPONENTS MAY VOID
THE WARRANTY.
,
The use of FilterBags made of paper or a similar
material, or FilterBags with a cardboard retaining
plate can lead to serious damage to the vacuum
cleaner and may void the warranty, just as with the
use of FilterBags without the "Original Miele" logo.
The "Original Miele" Logo will appear on the
packaging or directly on the FilterBag.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can be purchased
from an authorized Miele vacuum dealer or by visiting the
Miele store at www.mieleusa.com.
When using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE
Keep these operating instructions in a safe place and pass them on to any
future user.
WARNING-
To reduce the risk of fire, electric
shock or injury:
Before using
~
Check the voltage rating of the
vacuum cleaner before connecting the
power cord to an electrical outlet. Your
power source should correspond with
the voltage rating plate located on the
underside of the vacuum. Use only
household AC outlets. Never use DC
power sources. If you are not sure of
your home's voltage supply, consult a
qualified electrician. Connecting the
vacuum cleaner to a higher voltage
than indicated in these instructions may
result in damage to the vacuum cleaner
or injury.
~
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other.) This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not alter the
plug in any way.
~
A damaged vacuum cleaner can be
dangerous. Check the packaging,
vacuum cleaner and accessories for
any signs of damage. Do not use a
damaged appliance.
~
Do not use with a damaged cord or
plug. If the appliance is not working as
it should, has been dropped, damaged,
left outdoors or submerged in water,
bring it to a service center.
~
The electrical outlet must be fitted
with a 15 A fuse.
Use
~
Do not use on people or animals.
~
Do not use outdoors or on wet
surfaces. Only dry surfaces should be
vacuumed.
~
Use only as described in this
manual. Use only Miele recommended
accessories.
~
Do not alter or modify the vacuum
cleaner.
~
This appliance is intended for
household use only.
en - IMPORTANT SAFETY INSTRUCTIONS
5
~
Do not allow the vacuum cleaner to
be used as a toy. Close attention is
necessary when used near children.
~
Never use the vacuum cleaner
without the filter bag or filters in place.
Otherwise it could be damaged.
~
If a filter bag is not inserted, the dust
compartment lid will not close. Do not
force it shut.
~
Do not leave the vacuum plugged
in. Unplug it from the outlet when not in
use and before servicing.
~
On the underside of the vacuum
handpiece is a metal insert designed to
absorb static electricity. Please make
certain that your hand remains around
this metal insert when vacuuming.
~
Persons which lack physical,
sensory or mental abilities or
experience with the machine should not
use it without supervision or instruction
by a responsible person.
~
Unwind the cord completely to aid
the vacuum cleaner in dissipating heat.
~
This vacuum should not be used to
entrap or retain any hazardous materials.
~
Do not use the vacuum cleaner to
pick up liquids or damp dirt. This could
impair the electrical safety of the
vacuum cleaner. Wait for freshly
shampooed carpets to dry.
~
Do not vacuum anything that is
burning or smoking such as cigarettes,
matches or hot ashes. The vacuum
cleaner could catch fire.
~
Do not vacuum toner dust. Toner,
such as that used in printers and
photocopiers can conduct electricity.
~
Do not use to pick up any flammable
or combustible liquids, such as
gasoline, or use in areas where they
may be present. The vacuum cleaner
could explode.
~
Do not vacuum up items which are
heavy, hard or have sharp edges. They
could cause a blockage and damage
the appliance.
~
Do not pull or carry by the cord, use
the cord as a handle, close a door on
the cord, or pull the cord around sharp
edges or corners. Do not run the
appliance over the cord. Keep the cord
away from heated surfaces.
~
Do not unplug by pulling on the cord.
To unplug, grasp the plug, not the cord.
~
Do not handle the plug or vacuum
with wet hands.
~
Keep the power cord, hair, loose
clothing, fingers and all parts of the body
away from openings and moving parts.
~
Do not place anything into the
openings of the vacuum cleaner. Do
not use if any openings are blocked;
keep them free of dust, lint, hair, or
anything that may reduce air flow.
~
This appliance is equipped with a
power cord reel. Hold plug when
rewinding onto cord reel. Do not allow
plug to whip when rewinding.
~
Turn off all controls before
unplugging.
~
Use extra care when cleaning on
stairs.
~
Floor attachments, accessories and
wands must not be used at head level
to avoid injury to eyes and ears.
en - IMPORTANT SAFETY INSTRUCTIONS
6
~
Monitor the filter bag change
indicator and inspect all filters regularly.
For best performance, the filter bag
and filters should be replaced when
necessary. A full bag or blocked filter
will reduce the vacuum cleaner's
suction power. A temperature limiter
automatically switches the vacuum
cleaner off if it gets too hot, see
"Frequently asked questions".
Using accessories
~
Unplug the vacuum when changing
accessories.
~
Do not use the vacuum without an
accessory attached. The rim could be
damaged and injuries could result from
sharp edges.
~
Miele filter bags are disposable and
intended to be used only once. Do not
attempt to reuse them. An over stuffed
filter bag will reduce the efficiency of
the vacuum cleaner.
~
Only use genuine Miele filter bags
with the Miele quality signet and
original Miele filters and accessories.
Only then will the manufacturer
guarantee its safety. Only use genuine
Miele filter bags with the Miele quality
signet and original Miele filters and
accessories. Only then will the
manufacturer guarantee its safety.
~
The hose contains electrical wires.
Do not use when damaged, cut, or
punctured. Avoid picking up sharp
objects.
~
Always turn off this appliance before
connecting or disconnecting either
hose or motorized nozzle.
Cleaning, maintenance and
repairs
~
Turn the vacuum cleaner off after
each use and before every cleaning /
maintenance. Pull the plug from the
outlet.
~
Never submerge the vacuum
cleaner in water. Clean only with a dry
cloth or slightly damp cloth when
disconnected from the mains supply. If
moisture gets into the appliance there
is a risk of electric shock.
~
Repairs must only be performed by
an authorized service agent in
accordance with national and local
safety regulations. Unauthorized repairs
could cause injury or machine damage.
~
If the power cord is damaged it
should be replaced along with a new
cable reel by Miele Technical Service.
Disposing of an old appliance
~
Before discarding an old vacuum
cleaner, please cut off the power cord
and render the plug useless. Ensure
the appliance presents no danger to
children while being stored for
disposal.
SAVE THESE
INSTRUCTIONS
en - IMPORTANT SAFETY INSTRUCTIONS
7
en - Guide to the vacuum cleaner
8
a Handpiece
b Air inlet valve
c Locking button
d Accessory clip
e Telescopic wand release button
f Dust compartment lid release
g Telescopic wand
h Filter bag
i Carrying handle
j Floor brush *
k Transport/storage holder
l Dust compartment filter (motor protection)
m Exhaust filter *
n Suction power selector
o Power cord with plug
p Cord rewind switch
q Park-System
r On / Off switch
s Airflow indicator
t Elbow
u Suction hose
The features marked * may vary or not be available depending on your model.
Some models come standard with a Turbobrush, which is not shown in this figure.
A separate Operating manual is supplied with the vacuum.
en - Guide to the vacuum cleaner
9
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before using the vacuum
cleaner
Attaching the suction hose (see fig. 1)
^
Insert the elbow into the suction
socket until it clicks. Use the inlet
guides to direct insertion.
Removing the suction hose (see fig. 2)
^ Press the release buttons at the sides
of the elbow and lift the hose from the
socket.
Connecting the suction hose and
handpiece (see fig. 3)
^ Insert the hose into the handpiece
until it clicks into place.
Connecting the handpiece and
telescopic wand (see fig. 4)
^
Insert the handpiece into the
telescopic wand until it clicks. Use
the inlet guides to direct insertion.
^
To release the handpiece from the
telescopic wand, press the locking
button (see arrow) and pull the
handpiece away from the telescopic
wand.
Adjusting the telescopic wand
(see fig. 5)
The telescoping wand is composed of
two interlocking tubes that can be
adjusted to the desired length.
^
Press the release button and slide
the tubes to the desired length.
Attaching the floor brush (see fig. 6)
^
Insert the wand into the floor brush
and twist until it locks with a click.
^
To release the floor brush from the te
-
lescopic wand, press the locking but
-
ton (see arrow).
Always follow the flooring
manufacturer's cleaning and care
instructions.
SBB -3 Smooth Floor Brush
The floor brush is suitable to vacuum
sturdy hard floors, e. g. tiles and stone
floors.
SBD 285-3 AllTeQ Floor Brush
(see fig. 7)
The floor brush is suitable for cleaning
carpets, rugs, and hard surfaces. For
flooring susceptible to scratches, use
one of the special Miele floor brushes
(see "Optional accessories").
To clean carpets and area rugs:
^
Press the foot switch marked %.
To clean hard flooring:
^
Press the foot switch marked ).
Always use the floor brush with the
bristles raised to clean floors with
very deep joints or gaps.
Turbobrush
Some models come with a Turbobrush
as an accessory. Please refer to the
separate operating instructions for
instruction on use and maintenance.
en
10
Activating the exhaust filter change
indicator
Depending on the model, one of the
following standard exhaust filters is
installed (see fig. 8).
a AirClean Filter
b Active AirClean 50 Filter (black)
c HEPA AirClean 50 Filter (white)
^
Open the dust compartment lid and
raise until it clicks into place
(see fig. 9).
^
Remove the marker strip (see fig. 10).
^ Press the exhaust filter change
indicator ~ (see fig. 11).
^ After about 10-15 seconds, a small
red marker will appear in the
left-hand side of the display
(see fig. 12).
^ Close the dust compartment lid until
it clicks into place. Take care not to
catch the dustbag in the lid.
How the exhaust filter change
indicator works
The exhaust filter change indicator
displays the usable life of the exhaust
filter. The indicator will turn fully red
after approx. 50 hours of operation,
which is equivalent to one year of
average use (see fig. 13).
Using the included accessories
(see fig. 14)
The following accessories are included:
a Dust brush
For cleaning moldings, decorative or
carved items, etc.
The head of the brush swivels and
can be turned to the best cleaning
position.
b Upholstery tool
For cleaning upholstery, mattresses,
cushions, curtains, covers etc.
c Crevice nozzle
For cleaning in folds, crevices and
corners.
d Accessory clip for the included ac-
cessories (see fig. 15)
Position the accessories as indicated
with the symbols on the accessory
holder.
^ Insert the accessory holder either on
the hand piece at the handle or on
the hose connector of the vacuum
cleaner.
Floor brush AllTeQ (see fig. 16)
(depending on model)
Also suitable for vacuuming stairs.
,
For your own safety, always
vacuum stairs from bottom to top.
en
11
Use
Power cord
,
Unwind the cord completely to
aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use
the cord as a handle, close a door
on the cord, or pull the cord around
sharp edges or corners. Do not run
the appliance over the cord. Keep
the cord away from heated surfaces.
Do not unplug by pulling the cord. To
unplug grasp the plug, not the cord.
This appliance is equipped with a
power cord reel. Hold the plug when
rewinding onto cord reel. Do not
allow plug to whip when rewinding.
Unwinding (see fig. 17)
^ Hold the plug and pull the power
cord out to the required length
(maximum 18 ft / 5.5 m).
^
Insert the plug into the electrical
outlet.
,
To reduce the risk of electric
shock, the vacuum has a polarized
plug (one blade is wider than the
other). This plug will fit in a polarized
outlet only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not alter the
plug in any way.
Danger of overheating and damage.
Rewinding (see fig. 18)
^
Unplug the vacuum from the outlet.
^
Press the rewind switch briefly and
the power cord will rewind automati
-
cally.
^
Press the rewind switch again to stop
the rewinding.
^
Hold the plug so that it does not whip
around when rewinding.
Turning the vacuum on and off
(see fig. 19)
^ Press the On/Off switch.
Adjusting the suction (see fig. 20)
You can adjust the suction power to suit
the situation. When you reduce the
suction power, the floor brush can be
moved with less effort.
The symbols on the controls indicate
what each setting is suitable for.
a curtains, lightweight fabrics
b upholstery, cushions
c thick pile carpets, rugs and
runners
( energy-saving, daily vacuuming
with low noise level
e low pile carpets
f hard flooring, and intensive
cleaning of carpets
^
Turn the rotary selector to the desired
suction power setting.
en
12
Opening the air inlet valve (see fig. 21)
The air inlet valve is designed to
provide a quick, convenient reduction
of suction power, e.g. when moving
from a carpet to an area rug.
^
Open the air inlet valve far enough to
reduce the power.
Opening the air inlet valve reduces the
power to the tool being used.
While vacuuming (see fig. 22)
The vacuum cleaner can also stand on
its end for vacuuming stairs, drapes etc.
,
To prevent static electricity your
hand must touch the metal inlay on
the underside of the vacuum
handpiece. Be certain to
continuously touch this inlay when
vacuuming fine dust, flour or
sawdust as these materials are
more likely to create a static
electricity. To further prevent static
discharge while vacuuming, pull the
vacuum along by the hose with one
hand while continuing to hold the
handpiece in the other hand.
Parking, transport and storage
Park-System (see fig. 23)
The Park-System allows you to park the
telescopic wand and the suction unit on
the vacuum cleaner during brief pauses.
^
Insert the parking clip attachment on
the suction unit into the parking slot
from above.
If the vacuum cleaner is on an
incline, e.g. a ramp, slide the tube
into the telescopic wand all the way.
Park-System for storage (see fig. 24)
,
Turn the vacuum cleaner off
after use. Remove the plug from the
electrical outlet.
^
Stand the vacuum cleaner vertically.
It is helpful to completely insert the
tubes into the telescopic wand.
^
Insert the parking clip attachment on
the suction unit into the Park-System
from above.
This makes the vacuum cleaner easier
to carry and store.
Maintenance and care
,Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
The Miele filter system consists of the
following three components.
Filter bag
Exhaust filter
Dust compartment filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner’s efficiency.
Only use Miele filter bags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
13
en
,
The use of filter bags made of
paper or a similar material, or filter
bags with a cardboard retaining
plate can lead to serious damage to
the vacuum cleaner and possibly
voiding the warranty, just as with the
use of filter bags without the
"Original Miele" logo.
Purchasing new filter bags and filters
Original Miele filter bags and filters can
be purchased from an authorized Miele
vacuum dealer or by visiting the Miele
online store.
Which filter bags and filters are the
right ones?
This vacuum cleaner uses Original
Miele filter bags Type F/J/M and an
Original Miele filters, the "Original Miele"
Logo will appear on the packaging or
directly on the filter bag.
An "AirClean" exhaust filter and a dust
compartment filter are supplied with
every box of Miele filter bags.
If you would like to purchase additional
Miele filters separately, contact your
vacuum dealer or Miele, please quote
the model number of your Miele vacuum
cleaner to ensure correct parts are
ordered. These parts are also available
to order from the online Miele store.
The exhaust filter supplied with the
vacuum cleaner can be exchanged
with another type of Original Miele filter
(see "Exchanging exhaust filters").
When to change the filter bag
(see fig. 25)
Change the filter bag when the colored
marker in the airflow indicator
completely fills the display in red.
Filter bags are disposable articles
and made to be used only once.
Dispose of full filter bags. Do not
attempt to reuse.
Clogged pores reduce the suction
power of the vacuum cleaner.
Check the airflow indicator
^ Attach the floor brush AllTeQ
(depending on model) to the vacuum
cleaner. All other suction tools can
affect the function of the airflow
indicator.
^
Use the On/ Off foot switch s to
switch the vacuum cleaner on, then
select the highest suction setting.
^
Slightly lift the floor brush AllTeQ from
the floor. If the color marker
completely fills the indicator window,
the filter bag needs to be changed.
How the airflow indicator works
The airflow indicator is designed to
show when the bag is full of common
household dust and measures the
amount of air flow through the filter bag.
Normal household dust is a mixture of
dust, hair, carpet fluff, threads, sand,
etc.
en
14
However, if fine dust, such as drill dust,
sand, plaster or flour is vacuumed, the
pores of the filter bag may become
blocked. The marker will indicate that
the bag is "full" even when it is not. The
filter bag should be changed as the
suction power is greatly reduced.
If the bag is bulging with pet fur, hair,
carpet fluff, etc. the indicator may not
register "full". This is because the air
flow of the filter bag may still be high
enough not to activate the marker to
show maximum. The filter bag should
still be changed.
How to change the filter bag
(see fig. 26 + 27)
^ Open the dust compartment lid
(see fig. 9).
The filter bag has a flap that automatically
closes to prevent dust from escaping
when the bag is removed.
^ Grasp the finger grip and pull the
filter bag out of the holder.
^
Insert the new filter bag into the hol
-
der as far as it will go. Note: Do NOT
unfold the filter bag when you first re
-
move it from the box.
^
Wait until you have inserted the filter
bag into the compartment before
unfolding it.
^
Now close the dust compartment lid
until it clicks into place, taking care
not to catch the filter bag in the lid.
,
If you do not insert a replacement
filter bag, the dust compartment lid is
designed not to close. Do not use
force!
When should I change the dust
compartment filter?
Whenever you start a new box of Miele
filter bag filters, you should change the
dust compartment filter. A new dust
compartment filter is included in every
box of Miele filter bags.
Replacing the dust compartment
filter (see fig. 28)
^
Open the dust compartment lid.
^
Open the filter frame, remove the old
filter and replace with a new one.
^
Close the filter frame.
When to change the exhaust filter?
Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 8):
a AirClean Filter
Change the exhaust filter each time you
open a new box of Miele filter bags.
A new AirClean exhaust filter is included
in every box of Miele filter bags.
b Active AirClean 50 (black)
c HEPA AirClean 50 (white)
If the display of the exhaust filter
change indicator has turned fully red
(see fig. 13).
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
Instead of the Active AirClean 50 b or
HEPA AirClean 50 c exhaust filter
installed as standard, an AirClean a
exhaust filter can also be used (see
section "Maintenance and care -
Exchanging exhaust filters").
en
15
How to replace the AirClean exhaust
filter? (see fig. 29 + 30)
Make sure that only one exhaust
filter is inserted in the frame.
^
Open the dust compartment lid.
^
Open the filter frame and remove the
used AirClean exhaust filter with the
clean corner (see arrow).
^
Insert a new AirClean exhaust filter.
But if you want to install an Active
AirClean 50 filter or HEPA AirClean
50 filter, you must heed the section
"Maintenance and care - Exchanging
exhaust filters".
^ Close the filter frame.
^ Close the dust compartment lid until
it clicks into place.
How do I change the Active AirClean
50 or the HEPA AirClean 50 exhaust
filter? (see fig. 31 + 32)
Make sure that only one exhaust
filter is inserted in the frame.
^
Open the dust compartment lid.
^
Lift the Active AirClean 50 or HEPA
AirClean 50 exhaust filter and remove
it.
^
Insert the new Active AirClean 50 or
HEPA AirClean 50 exhaust filter and
press it downwards.
^
Press the exhaust filter change
indicator ~ (see fig. 11).
^
After about 10-15 seconds, a small
red marker will appear in the left-hand
side of the display (see fig. 12).
If you want to install an AirClean
exhaust filter, you must adhere to
the section "Maintenance and care -
Exchanging exhaust filters".
^
Close the dust compartment lid until
it clicks into place.
Exchanging exhaust filters
Make sure that only one exhaust
filter is inserted in the frame.
Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 8):
a AirClean Filter
b Active AirClean 50 (black)
c HEPA AirClean 50 (white)
Important
1. If you replace exhaust filter a with
exhaust filter b or c, you must be sure
to remove the filter frame before
inserting the new filter type. The
exhaust filter change indicator must
also be activated (see fig. 11).
2. If you replace exhaust filter b or c
with exhaust filter a, you must be sure
to place the new filter in the filter frame
* (see fig. 31).
* Filter frame - see section on "Optional
accessories"
en
16
When to change the thread catcher
of the floor brush AllTeQ (depending
on model)
The thread catcher on the floor brush
AllTeQ can be replaced when the pile
is worn out.
Replacing the thread catchers
(see fig. 33)
^
Use a screwdriver or similar object to
remove the thread catchers from the
slots.
^
Insert the new thread catchers.
New thread catchers can be purchased
from any authorized Miele vacuum
dealer or Miele.
Cleaning the floor roller of the floor
brush AllTeQ, see fig. 34
(depending on model)
a Release the roller pin using a coin.
b Push and take out the roller axle.
c Take out the roller.
^
Remove all threads, hair etc. and
reinstall the roller and lock the roller
pin.
Cleaning and care
,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a
damp cloth or a cleaner suitable for
plastics.
,
Do not use abrasive, oil-based,
glass or all purpose cleaners!
Dust compartment
The dust compartment can, if
necessary, be cleaned using a dry
cloth, dusting brush or a second
vacuum to remove any dust.
Monitor the filter bag change indicator
and inspect all filters regularly. Clean or
replace them when necessary
according to these Operating
Instructions.
,
Do not submerge the vacuum in
water. If moisture gets into the
appliance there is the risk of an
electric shock.
Frequently asked questions
The vacuum cleaner shuts off
automatically.
A temperature sensor will turn off the
vacuum cleaner if it becomes too warm.
This problem can occur if, for example,
an object is blocking the suction hose
or the filter bag pores have become
clogged with fine dust. The cause
could also be a heavily soiled exhaust
or dust compartment filter. If this
happens, turn off the vacuum cleaner
(press the On/Off foot switch s) and
unplug the power plug from the
electrical outlet.
Once the cause has been addressed,
allow the vacuum cleaner to cool for
approx. 20 - 30 minutes before
resuming vacuuming.
en
17
Technical service
In the event of a fault which you cannot
fix yourself please contact the Miele
Service Department at the phone
number listed on the back of this boo
-
klet.
^
Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
Optional accessories
Always follow the flooring
manufacturer's cleaning and care
instructions.
You can order these and many other
products via the Miele website.
Some models come with the one or
more of the following accessories.
Floor tools/Brushes
Turbobrush Turbo Comfort
(STB 205-3)
For cleaning short pile textile floor
coverings.
Floor brush Hardfloor (SBB 235-3)
To vacuum sturdy hard floors, e.g. tiles.
Floor brush Parquet -3
With natural bristles for use on
hardwood-type floors that may be
susceptible to scratching, such as
parquet and laminates.
Floor brush - Parquet Twister with
swiveling head (SBB 300-3)
For cleaning all hard flooring and small
hard to reach areas.
Floor brush - Parquet Twister XL with
swiveling head (SBB 400-3)
For cleaning large areas of hard
flooring and small hard to reach areas.
Other accessories
MicroSet accessory case (SMC 20)
Accessories for use on small or
hard-to-reach items (stereos,
keyboards, models, etc).
Cat&Dog accessory case (SCD 10)
Accessories for cleaning households
with pets.
Hand Turbobrush Turbo Mini
Compact (STB 20)
For vacuuming upholstery, mattresses
or car seats.
Universal brush (SUB 20)
For dusting books, shelves etc.
Can be used with the adapter included
with the vacuum cleaner.
Dust brush with natural bristles
(SSP 10)
For dusting particularly delicate objects.
Grill / Radiator brush (SHB 30)
For cleaning radiators, narrow shelves
and crevices.
en
18
Mattress tool (SMD 10)
For use on mattresses, upholstery, and
deeper crevices.
Crevice nozzle, 300 mm (SFD 10)
Extra long crevice nozzle for cleaning in
folds, crevices and corners.
Crevice nozzle 22" (560 mm) (SFD 20)
Flexible crevice nozzle for vacuuming
hard to reach places.
Upholstery nozzle, 7 1/2" (190 mm)
(SFD 10)
Extra wide upholstery nozzle for
cleaning upholstered furniture,
mattresses and pillows.
Filters
Active AirClean 50 exhaust filter
(SF-AA 50)
Absorbs odors from the dirt in the filter
bag.
HEPA AirClean 50 exhaust filter
(SF-HA 50)
Exceptional exhaust filter for purest
exhaust air. Especially suitable for
those with allergies.
Filter frame
Required if you want to use an AirClean
exhaust filter instead of an Active Air
-
Clean 50 or HEPA AirClean 50 exhaust
filter.
Caring for the environment
Disposal of the packing material
The cardboard box and packaging
protect the vacuum cleaner during
shipping. These materials are
recyclable. Please recycle.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Disposal of an old machine
Old vacuum cleaners may contain
materials that can be recycled. Please
contact your local recycling authority
about the possibility of recycling these
materials.
en
19
20
What This Warranty Covers And For What Period The Coverage Extends
Miele, Inc. (hereinafter "Miele") warrants to the original purchaser of this product, living in the United States of
America, who purchased their vacuum from a Miele authorized distributor or dealer:
a. That this product, including all of its Miele authorized parts is free of defects in material and workmanship.
b. That this product, if found to be defective within the stated warranty period, will be repaired free of charge to the
consumer (both parts and labor) by an authorized Miele service agent.
c. The warranty period for vacuum cleaners (excepting the S8990 and RX1 Scout), and all accessories, excluding
vacuum cleaner motors, power head motors, and vacuum cleaner casings (body), is one (1) year from the date of
purchase. For the S8990, the warranty period is five (5) years from the date of purchase.
d. For vacuum cleaner casings (body), the warranty period will be as follows:
- The structural integrity of the vacuum cleaner casing (body), will be covered for seven (7) years from the date of
purchase against defects in material and workmanship on the S2xxx, S4xxx, S5xxxx, S6xxx, S7xxx, S8xxx, S160
and S190 product series.
- The structural integrity of the vacuum cleaner casing (body) of the S8990 will be covered for ten (10) years from
the date of purchase against defects in material and workmanship.
e. For vacuum cleaner and power head motors, the warranty period will be as follows:
- Vacuum cleaner and power head motors will be covered for seven (7) years from the date of purchase on the
S2xxx, S4xxx, S5xxx, S6xxx, S7xxx, S8xxx, S160 and S190 product series.
- Vacuum cleaner and power head motors for the S8990 will be covered for ten (10) years from the date of purchase.
f. For the RX1 Scout, the warranty period is two (2) years from the date of purchase for the complete vacuum,
except for the battery, which will be warranted for one (1) year from the date of purchase.
Vacuum cleaners other than the RX1 Scout used for commercial purposes, except for their motors, will be warranted
for a period of six (6) months from the date of purchase. The motors of commercially used upright vacuums will be
warranted for one (1) year and the motors of all other commercially used vacuum cleaners, except for the RX 1 Scout
will be warranted for two (2) years. There is no warranty for the RX1 Scout used for commercial purposes. Thereafter
this Limited Warranty shall be null and void.
This warranty only applies while the product remains within the United States, and shall be null and void in any other
US territories, possessions, or foreign countries.
What is not covered by this Warranty
This warranty does not cover damage or defects caused by or resulting from repairs, service or alterations to the
product or any of its parts or accessories which have been performed by service centers or repairmen not authorized
by Miele, or damage or defects caused by negligence, accident, abuse, misuse, improper or abnormal usage or
maintenance of the product, its parts or accessories. Ordinary wear and tear or cosmetic damage (scuffs, scratches,
gouges, dents, etc.) shall not be considered a defect in materials or workmanship.
Exclusion of Other Warranties
Except for the limited warranty provided herein, Miele disclaims any and all other express warranties with respect to
the product. Any warranty of merchantability or fitness for a particular purpose is limited in its duration to the term of
the limited warranty provided herein. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
Limitation of Liability for Special, Incidental or Consequential Damages
Miele will assume no liability, or other obligation with respect to any personal injury or property damage resulting from
the use of a vacuum cleaner, or its accessories, replacement parts, etc., which has not been purchased from, or serviced
by an Authorized Miele Dealer. Any purchaser who obtains a vacuum cleaner, accessories, replacement parts, etc., from
someone other than an Authorized Miele dealer proceeds at their own risk.
Miele specifically disclaims any and all liability, whether directly or by way of indemnity, for special incidental, consequential
or other damages, whether based on breach of contract, tort, strict or product liability, or any other legal theory.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may
not apply to you.
Special State Laws
This Limited Warranty gives you specific legal rights; you may have other rights, which vary, from state to state.
Service
For service under this Limited Warranty, or for information you may need about the product, please contact Miele at
the US address listed on the back of this booklet, or visit us at www.mieleusa.com.
Authorized Miele Dealers
To find an authorized Miele dealer in your area, please visit our website at www.mieleusa.com.
Effective Date: June 1, 2014
©2014 Miele, Inc.
LIMITED WARRANTY - VACUUM CLEANERS USA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Miele 41CAE035USA Le manuel du propriétaire

Catégorie
Aspirateurs
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues