Netgear AGM731F Guide d'installation

Taper
Guide d'installation
Installation Guide
Install the module
1. Insert the module into a slot that supports the SFP interface.
You will hear a click sound when the module is rmly seated.
2. Lift the latch on the module to lock it in place.
Remove the module
1. Lower the latch on the module to unlock it.
2. Grasp the sides of the module and pull it straight forward out of the slot.
SFP 1G Fiber Module
AGM731F and AGM732F
The 1000Base-X SFP transceiver module provides full-duplex 1000Mbps Ethernet
operation in each direction for NETGEAR managed switches.
The switch automatically detects the module, so you can simply plug it into an available
module slot.
WARNING: Because invisible laser radiation might be emitted from the aperture
of the port when no ber cable is connected, avoid exposure to laser radiation and
do not stare into open apertures.
Technical Specifications
Standards AGM731F: IEEE 802.3z, 1000Base-SX
AGM732F: IEEE 802.3z, 1000Base-LX
Connectors AGM731F: LC for 62.5/125µm or 50/125µm cable
AGM732F: LC for 9/125µm cable
Dimensions (H x W x D) AGM731F: 2.23 x 0.53 x 0.34 in (56.8 x 13.6 x 8.6 mm)
AGM732F: 2.26 x 0.53 x 0.33 in (57.4 x 13.4 x 8.5 mm)
Weight AGM731F: 0.58 oz (16.3 g)
AGM732F: 0.56 oz (16.0 g)
Storage temperature –40–185ºF (–40–85ºC)
Case operating
temperature
23–158ºF (–5–70ºC)
Operative relative
humidity
85% at 77ºF (25ºC)
Operating distance
multi-mode ber (MMF)
AGM731F:
OM1: 900 ft (275 m)
OM2: 900–1,800 ft (275–550 m)
OM3: 1,800 ft (550 m)
Operating distance
single mode ber (SMF)
AGM732F: 6 mi (10 km)
Power consumption 1.1W
MTBF AGM731F: >10 years
AGM732F: >10 years
Safety certication UL 60950-1, CSA-C22.2 No.60950-1
Environmental
compliance
RoHS
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the
device to your place of purchase within your return period.
Do not use this device outdoors.
Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz
devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation
of this device is permitted in large aircraft while ying above 10,000 feet. Operation of
transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications
with unmanned aircraft systems.
June 2022
  • Page 1 1
  • Page 2 2

Netgear AGM731F Guide d'installation

Taper
Guide d'installation

dans d''autres langues