Danby DUF570WDD Mode d'emploi

Marque: Danby

Modèle: DUF570WDD

Catégorie: Congélateurs

Taper: Mode d'emploi

Model • Modèle

DUF448WDD / DUF501WDD / DUF570WDD

UPRIGHT FREEZER

CONGÉLATEUR VERTICAL

Owner’s Use and Care Guide

Guide d’utilisation et soins de Propriètaire

•

V3.05.10 DM

TABLE OF CONTENTS

FREEZER SAFETY.......................................................................................3

Proper Disposal of Your Old Freezer or Refrigerator ...............................3

INSTALLATION INSTRUCTIONS ...............................................................4

Unpacking................................................................................................. 4

Location Requirements.............................................................................4

Electrical Requirements............................................................................ 5

Freezer Door .............................................................................................5

Adjust the Door.........................................................................................7

FREEZER USE .............................................................................................8

Ensuring Proper Air Circulation ................................................................ 8

Using the Control......................................................................................8

Key Eject Lock ..........................................................................................8

FREEZER FEATURES ................................................................................. 9

Refrigerated Shelves.................................................................................9

Door Bin ....................................................................................................9

Storage Basket ......................................................................................... 9

Storage Gate.............................................................................................9

FREEZER CARE .......................................................................................... 9

Cleaning Your Frost-Free Freezer ............................................................ 9

Base Grille............................................................................................... 10

Defrosting and Cleaning Your Manual Defrost Freezer ......................... 10

Changing the Light Bulb......................................................................... 11

Power Interruptions ................................................................................ 11

Moving Care ........................................................................................... 11

TROUBLESHOOTING ............................................................................... 11

ASSISTANCE OR SERVICE...................................................................... 13

In the U.S.A............................................................................................. 13

In Canada................................................................................................ 13

Accessories............................................................................................. 13

WARRANTY ............................................................................................... 14

TABLE DES MATIÈRES

SÉCURITÉ DU CONGÉLATEUR...............................................................15

Mise au rebut appropriée de votre

vieux congélateur ou réfrigérateur..........................................................15

INSTRUCTIONS D'INSTALLATION .........................................................16

Déballage ................................................................................................16

Emplacement d’installation .................................................................... 16

Spécifications électriques.......................................................................17

Portes du congélateur ............................................................................17

Ajustement de porte ............................................................................... 20

UTILISATION DU CONGÉLATEUR ..........................................................20

Pour s’assurer d’une circulation d’air appropriée..................................20

Utilisation de la commande....................................................................20

Serrure à éjection de clé.........................................................................21

CARACTÉRISTIQUES DU CONGÉLATEUR............................................21

Clayettes de réfrigération........................................................................ 21

Balconnet de porte .................................................................................21

Panier d'entreposage ............................................................................. 21

Barrière d’entreposage........................................................................... 21

ENTRETIEN DU CONGÉLATEUR............................................................ 22

Nettoyage du congélateur sans givre .................................................... 22

Grille de la base ...................................................................................... 22

Dégivrage et nettoyage du congélateur à dégivrage manuel................ 22

Remplacement de l'ampoule d’éclairage............................................... 23

Pannes de courant électrique................................................................. 24

Déménagement ...................................................................................... 24

DÉPANNAGE ............................................................................................. 24

ASSISTANCE OU SERVICE...................................................................... 26

Accessoires............................................................................................. 26

GARANTIE.................................................................................................. 27

FREEZER SAFETY

Proper Disposal of

Your Old Freezer or Refrigerator

IMPORTANT: Child entrapment and suffocation are not problems

of the past. Junked or abandoned freezers or refrigerators are still

dangerous... even if they will sit for “just a few days.” If you are

getting rid of your old refrigerator or freezer, please follow these

instructions to help prevent accidents.

Before You Throw Away Your Old Freezer or Refrigerator:

■Take off the doors or lid.

■Leave the shelves in place so that children may not easily

climb inside.

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury when using your freezer, follow these basic precautions:

WARNING:

SAVE THESE INSTRUCTIONS

■ Plug into a grounded 3 prong outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Use nonflammable cleaner.

■ Keep flammable materials and vapors, such as gasoline,

away from freezer.

■ Use two or more people to move and install freezer.

■ Keep key away from children.

■ Remove doors or lid from your old freezer or refrigerator.

■ Disconnect power before installing ice maker (on ice maker

kit ready models only).

State of California Proposition 65 Warnings:

WARNING: This product contains a chemical known to the State of California to cause cancer.

WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

WARNING

Suffocation Hazard

Remove doors or lid from your old freezer or

refrigerator.

Failure to do so can result in death or brain damage.

INSTALLATION INSTRUCTIONS

Unpacking

Remove Packaging Materials

■Remove tape and glue residue from surfaces before turning

on the freezer. Rub a small amount of liquid dish soap over the

adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your freezer. For more

information, see “Freezer Safety.”

Clean Before Using

After you remove all of the packaging materials, clean the inside of

your freezer before using it. See the cleaning instructions in

“Freezer Care.”

Location Requirements

IMPORTANT: Do not install the freezer near an oven, radiator, or

other heat source, nor in a location where the temperature will fall

below 40°F (5°C).

Check the strength of the floor before installing your freezer. It

should hold the weight of a freezer fully loaded with food.

Allow at least 3" (7.5 cm) of air space at the top and on both sides

of the freezer and 1" (2.5 cm) between the back of the freezer and

the wall. If the freezer is to be against a wall, leave extra space on

the hinge side so the door can open wider.

NOTE: This freezer may be installed side by side with another

refrigerator or freezer. Allow for a 3" (7.5 cm) clearance at the top

and sides and a ¹⁄₄" (0.64 cm) clearance between the appliances.

WARNING

Excessive Weight Hazard

Use two or more people to move and install freezer.

Failure to do so can result in back or other injury.

When Moving Your Freezer:

Your freezer is heavy. When moving the freezer for

cleaning or service, be sure to cover the floor with cardboard

or hardboard to avoid floor damage. Always pull the freezer

straight out when moving it. Do not wiggle or “walk” the

freezer when trying to move it, as floor damage could occur.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from freezer.

Failure to do so can result in death, explosion, or fire.

3" (7.5 cm)

Electrical Requirements

Before you move your freezer into its final location, it is important

to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your freezer be provided. Use an outlet that

cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the Temperature Control to the OFF

position as shown and then disconnect the freezer from the

electrical source.

Freezer Door

TOOLS NEEDED: ⁵⁄₈" hex-head socket wrench, ¹⁄₄" hex-head

socket wrench, ¹⁄₂" hex-head socket wrench, ³⁄₈" hex-head socket

wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-

end wrench, flat 2" putty knife.

IMPORTANT:

■All graphics referenced in the following instructions are

included later in this section after “Final Steps.” The graphics

shown are for a right-hand swing door (hinges factory installed

on the right).

■If you only want to remove and replace the door, see the

“Remove Door and Hinges” and “Replace Door and Hinges.”

■Before you begin, turn the control OFF, and remove food and

adjustable door or utility bins from door.

Install and Remove Handle

NOTE: If reversing the door swing, move the handle from one side

of the door to the other side.

To install handle:

1. Place the handle on the door as shown. See Handle graphic.

2. Using a flat-blade screwdriver, attach the handle to the door

with the four handle screws (provided).

3. Place the trim pieces on the upper and lower handle ends as

shown.

4. Apply firm pressure with your hand on the face of the trim.

Slide the top trim down and the bottom trim up toward the

handle.

To remove handle:

1. Remove the top and bottom trim.

2. Using a flat-blade screwdriver remove the four handle screws

and lift off the handle.

Remove Door and Hinges

⁵⁄₁₆" Hex-Head Hinge Screw

1. Unplug freezer or disconnect power.

2. Open freezer door and remove base grille from the bottom

front of the freezer. See Base Grille graphic 1A.

3. Close the freezer door and keep it closed until you are ready

to lift it free from the cabinet.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

4. Remove the parts for the top hinge as shown in Top Hinge

graphic 1B.

5. Lift the freezer door free from the lower hinge and cabinet and

set aside.

6. Remove three hex head hinge screws and bottom hinge

assembly. See Bottom Hinge graphic 1C.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Reverse Door (optional on some models)

IMPORTANT: If you want to reverse your door so that it opens in

the opposite direction, continue with “Reverse Door (optional on

some models)” instructions. If you are not reversing the door, see

“Replace Door and Hinges.”

Cabinet

1. Remove the cabinet hinge hole plugs from the cabinet top and

move them to the opposite side hinge holes as shown in

Graphic 2.

2. Remove the door stop screws from the Bottom Hinge bracket.

See Bottom Hinge graphic 1C

3. Remove the Hinge Pin Nut and Hinge Pin from the hinge

bracket.

4. Rotate the hinge bracket for installation on the opposite side

of the cabinet. See Graphic 3

5. Reinstall the Hinge Pin Nut and Hinge Pin to the hinge

bracket. Hinge Pin must point “up” when hinge bracket is

installed to the cabinet.

6. Invert the door stop so that the countersunk holes line up with

the screw holes in the hinge assembly. See Graphic 4

7. Reinstall the door stop screws. See Graphic 3.

8. Reinstall the hinge bracket to the cabinet with the three hex

head hinge screws.

Replace Door and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown and tighten

screws. See Bottom Hinge graphic 1C. Replace the freezer

door.

NOTE: Provide additional support for the door while the

hinges are being moved. Do not depend on the door magnets

to hold the door in place while you are working.

2. Assemble the parts of the top hinge as shown in the Top

Hinge graphic 1B. Do not tighten the screws completely.

3. Line up the door so that the bottom aligns evenly with the

cabinet. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are in

place. Reinstall top hinge cover. See Top Hinge graphic 1B.

2. Replace the base grille. See Base Grille graphic 1A.

3. Plug into a grounded 3 prong outlet.

4. Reset the control. See “Using the Control.”

5. Return all removable door parts to door and food to freezer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Adjust the Door

1. Locate the two front leveling legs taped among the packing

materials.

2. Screw these legs into the front holes on the bottom of the

freezer. The back of the freezer rests on two fixed supports.

3. Adjust the front legs enough to lift the cabinet up off of the

floor.

NOTE: If your model is equipped with rollers, the front legs

should be lowered enough to lift the rollers off of the floor to

ensure the freezer does not roll forward when the door is

opened.

A. Cabinet Hinge Hole Plugs

Door Handle

Seal Screw

Door Swing Reversal (optional)

Door Removal &

Replacement

Top Hinge

Bottom Hinge

A. Top Hinge Cover

Hex-Head Hinge Screws

C. Top Hinge

Base Grille

C. Hinge Pin

A. Door Stop Screws

B. Door Stop

Hex-Head Hinge Screws

D. Hinge Pin Nut

Right Hand Hinge

Door Stop

Left Hand Hinge

Door Stop

A. Door Stop Screws

B. Door Stop

C. Hinge Pin

Hex-Head Hinge

Screws

D. Hinge Pin Nut

A. Handle Trim

B. Handle Screws

C. Handle

1-1

Handle

4. Place a leveling tool on top of the freezer first side to side,

then front to back. Turn leg counterclockwise to raise a corner.

Turn leg clockwise to lower a corner.

5. Repeat Step 4 until freezer is level.

6. After freezer is fully loaded with food, recheck with level as in

Step 4.

FREEZER USE

Ensuring Proper Air Circulation

In order to ensure proper temperature, you need to permit proper

airflow in the freezer. As shown in the illustration, cool air enters

through the freezer wall and moves down. The air then

recirculates through the vent near the bottom.

Do not block any of these vents with food packages. If the vents

are blocked, airflow will be restricted, and temperature and

moisture problems may occur.

IMPORTANT: To avoid odor transfer and drying out of food, wrap

or cover foods tightly.

Using the Control

Turn the freezer temperature control to 4. This setting is designed

to maintain the temperature at or near 0°F (-17.8°C) under normal

operating conditions.

Allow the freezer to cool 6 to 8 hours before filling with frozen

food. Let the freezer cool overnight before adding large amounts

of unfrozen food. Do not add more than 2 to 3 lbs (907 to 1,350 g)

of unfrozen food per cubic foot (28.32 L) of freezer space.

NOTE: When the freezer is first started, the compressor will run

constantly until the freezer is cooled. It may take up to 6 or

8 hours (or longer), depending on room temperature and the

number of times the freezer door is opened. After the freezer is

cooled, the compressor will turn on and off as needed to keep the

freezer at the proper temperature.

The outside of your freezer may feel warm. This is normal. The

freezer’s design and main function is to remove heat from

packages and air space inside the freezer. The heat is transferred

to the room air, making the outside of the freezer feel warm.

Adjusting Control

■Turn control to a higher number for colder temperatures.

■Turn control to a lower number for less cold temperatures.

NOTE: The small snowflake icon represents the number 1 or

the least cold setting. The large snowflake icon represents 6 or

the coldest setting.

Fast Freeze (on some models)

This setting causes the freezer to run continuously, driving the

freezer temperature to the coldest possible temperature. To

activate, adjust the control knob to the igloo icon, which

represents the fast freeze setting. Use this feature just before

adding large amounts of unfrozen foods. For best food quality, do

not exceed 3 lbs (1,350 g) per cubic foot (28.32 L). Return to your

normal setting after 24 to 48 hours.

Temperature Alarm (on some models)

The temperature monitor alarm is located to the left of the

temperature control and sounds an audible alarm if the

temperature reaches 10°F (-12°C) or more above normal for the

selected setting.

The alarm is controlled by a three-position switch.

Key Eject Lock

(on some models)

To lock or unlock the freezer, you must hold the key in the lock

while turning. The lock is spring loaded, so the key cannot be left

in the lock.

If the key is lost, contact your dealer for a replacement. Always

give the model and serial number of your freezer when requesting

a replacement key.

|The proper setting for normal freezer use. The alarm

is on, and the amber light will be illuminated.

0Keeps the alarm from sounding when the freezer is

warm, such as during start-up or defrosting.

✔Tests the alarm regardless of temperature.

FREEZER FEATURES

This manual covers several different models. The freezer you have

purchased may have some or all of the items listed. The locations

of the features may not match those of your model.

Refrigerated Shelves

(on some models)

Your freezer is equipped with refrigerated interior shelves.

Packages in direct contact with the shelves will have the best

refrigeration. Fresh, unfrozen food packages should be stored

directly on the shelves and not on top of already frozen food

packages.

When placing the food packages in your freezer, please

remember:

■The cabinet shelves have the best freezing capability. The

door shelves and the bottom of the cabinet have a slightly less

cold temperature. Therefore, packages sensitive to

temperature (meat, poultry, etc.) should not be placed on the

door shelves or the freezer bottom.

■Leave some space between the food packages so that cold

air can pass over and around them.

Door Bin

To remove and replace the bin:

1. Remove the bin by tipping the front of the bin forward and

sliding out.

2. Replace the bin by sliding it in above the desired support

tilting it back into place.

Storage Basket

(on some models)

The slide out basket provides separate storage space for items

that are difficult to store on freezer shelves. To remove the basket,

pull out and lift up.

Storage Gate

(on some models)

To Lower and Raise the Storage Gate:

1. Lift the top of the gate up slightly, out of the supports. Pull the

gate forward and down.

2. Return the gate to the upright position. Lift the top of the gate

slightly to clear the supports. Lower the gate into the

supports.

FREEZER CARE

Cleaning Your Frost-Free Freezer

(some models)

Frost-free means that you will not have to defrost your freezer.

Frost is removed by air moving and collecting any moisture and

depositing it on the cooling coil. The cooling coil periodically

warms up enough to melt the frost, and it then flows down to the

drain pan (located behind the base grille) where it is evaporated.

Complete cleaning should be done at least once a year.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler,

additional refrigerator-freezer, or in a cool area.

3. Wash the inside walls with a solution of mild detergent in

warm water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm

water.

■Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets. Do not use paper towels,

scouring pads, or other harsh cleaning tools. These can

scratch or damage materials.

4. Rinse well and wipe dry with a clean soft cloth.

5. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Stainless steel finish: Wash with a clean sponge or soft cloth

and a mild detergent in warm water. Do not use abrasive or

harsh cleaners. Dry thoroughly with a soft cloth.

■To keep your stainless steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer’s approved Stainless Steel

Cleaner and Polish.

IMPORTANT: This cleaner is for stainless steel parts only!

■Do not allow the Stainless Steel Cleaner and Polish to

come into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If unintentional

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. Dry thoroughly with a soft

cloth.

6. Replace all frozen food.

7. Plug in freezer or reconnect power.

8. See “Using the Control.”

Base Grille

To Remove and Replace the Base Grille:

1. Open the freezer door and remove the base grille by pulling

down and out from the top.

2. Replace the base grille by putting the clips in the openings in

the refrigerator panel. Push in until the base grille snaps into

place.

Defrosting and Cleaning

Your Manual Defrost Freezer

(some models)

Defrost and clean your freezer when frost has built up to about

¹⁄₄" (6 mm) thickness. Complete defrosting and cleaning should be

done at least once a year. In high humidity areas, a freezer may

need more frequent defrosting and cleaning.

Do not use abrasive cleaners on your freezer. Do not use cleaning

waxes, concentrated detergents, bleaches, or cleaners containing

petroleum on plastic parts. Damage can occur.

NOTE: The drain cap must be removed before defrosting the

freezer and replaced securely afterward.

1. Unplug freezer or disconnect power.

2. Remove all frozen food. Wrap frozen food in several layers of

newspaper and cover with a blanket. Food will stay frozen for

several hours. You may also store frozen food in a cooler, an

additional refrigerator or freezer, or a cool area.

3. Remove base grille. See “Base Grille.”

4. Style 1–Models with a drain system

Reach under the unit and pull the drain hose out through the

opening. The drain hose carries defrost water out of the

freezer, and through the area behind the base grille. Place a

large shallow pan under the drain hose. Remove the drain cap

inside freezer.

NOTE: Check the drain pan frequently to avoid water

overflow. Have a second pan handy for easier emptying.

Style 2–Models without a drain system

Remove water from the freezer bottom using a sponge or

baster and empty the water into a large pan.

5. Place pans of hot water in freezer with door open to speed

melting. Directing air from an electric fan into freezer will also

help. Do not place fan or any electrical device in freezer.

6. Use a plastic scraper to remove frost.

NOTE: Do not use an ice pick, knife, or other sharp-pointed

tool to defrost freezer. Damage can occur.

7. Wipe water from walls with a towel or sponge.

8. Wash the inside walls with a solution of mild detergent in

warm water or 2 tbs (26 mg) baking soda to 1 qt (0.95 L) warm

water. Do not use abrasive or harsh cleaners.

9. Rinse well and wipe dry with a clean soft cloth.

10. Use the appropriate cleaning method for your exterior finish.

Painted metal: Wash exteriors with a clean sponge or soft

cloth and a mild detergent in warm water. Do not use abrasive

or harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

Stainless steel finish: Wash with a clean sponge or soft cloth

and a mild detergent in warm water. Do not use abrasive or

harsh cleaners, or cleaners designed for stainless steel. Dry

thoroughly with a soft cloth.

■To keep your Stainless Steel refrigerator looking like new

and to remove minor scuffs or marks, it is suggested that

you use the manufacturer’s approved Stainless Steel

Cleaner and Polish.

IMPORTANT: This cleaner is for Stainless Steel parts only!

■Do not allow the Stainless Steel Cleaner and Polish to

come into contact with any plastic parts such as the trim

pieces, dispenser covers or door gaskets. If unintentional

contact does occur, clean plastic part with a sponge and

mild detergent in warm water. Dry thoroughly with a soft

cloth. To order the cleaner, see “Accessories.”

11. For models with a drain system, you should replace the drain

hose, drain cap and base grille.

12. Replace all frozen food.

13. Plug in freezer or reconnect power.

14. See “Using the Control.”

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Changing the Light Bulb

NOTE: Not all appliance bulbs will fit your freezer. Be sure to

replace the bulb with one of the same size, shape, and wattage.

Style 1

1. Unplug freezer or disconnect power.

2. Replace the light bulb with an appliance bulb of the same

wattage.

3. Plug in freezer or reconnect power.

Style 2

1. Unplug freezer or disconnect power.

2. Remove the light shield. From the front of the light shield,

push backward and down.

3. Replace the light bulb with an appliance bulb of the same

wattage.

4. Replace the light shield.

5. Plug in freezer or reconnect power.

Power Interruptions

If the power will be out for 24 hours or less, keep the door closed

to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the

following:

■Remove all frozen food and store it in a frozen food locker.

■If a food locker is not available, consume or can perishable

food at once.

After the power is restored, unplug the freezer for 30 minutes, to

allow the refrigeration system to equalize. During this time keep

the door closed whenever possible.

REMEMBER: A full freezer stays cold longer than a partially filled

one. A freezer full of meat stays cold longer than a freezer full of

baked goods. If you see that food contains ice crystals, it may be

refrozen, although the quality and flavor may be affected. If the

condition of the food is poor, dispose of it.

Moving Care

When you are moving your freezer to a new home, follow these

steps to prepare it for the move.

1. Remove all frozen food.

2. Unplug the freezer.

3. Take out all removable parts, wrap them well, and tape them

together so they don’t shift and rattle during the move.

4. Clean the freezer thoroughly.

5. Tape the freezer shut and tape the electrical cord to the

cabinet.

When you get to your new home, refer to the “Installation

Instructions” and “Freezer Use” sections for information on

installation and setting the controls.

TROUBLESHOOTING

Try the solutions suggested here first to avoid the cost of an unnecessary service call...

Your freezer will not operate

■Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■Has a household fuse blown or circuit breaker tripped?

Replace the fuse or reset the circuit breaker.

■Is the Temperature Control turned to the OFF position?

See “Using the Control.”

■Is the freezer defrosting (on some models)? Recheck to see

whether the freezer is operating in 30 minutes. Your freezer will

regularly run an automatic defrost cycle.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

The lights do not work

■Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

■Is a light bulb loose in the socket or burned out? See

“Changing the Light Bulb.”

There is water in the defrost drain pan (on some models)

■Is the freezer defrosting? The water will evaporate. It is

normal for water to drip into the defrost pan.

■Is it more humid than normal? When it is humid, expect that

the water in the defrost pan will take longer to evaporate.

The motor seems to run too much

■Is there excessive frost or a package keeping the door

from closing? Defrost and clean the freezer, or move the

package so the door closes properly.

■Is the room temperature hotter than normal? The motor will

run longer under warm conditions. At normal room

temperatures, your motor will run about 40% to 80% of the

time. Under warmer conditions, it will run even more.

■Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer.

The motor normally will run longer to cool the freezer back

down.

■Is the door opened often? The motor will run longer when

this occurs. Conserve energy by getting all items out at one

time, keeping food organized, and closing the door as soon as

possible.

■Is the control set correctly for the surrounding conditions?

See “Using the Control.”

■Is the door completely closed? Push the door firmly shut. If

it will not shut all the way, see “The door will not close

completely or is difficult to open” later in this section.

■Are the condenser coils dirty (on some models)? This

blocks air transfer and makes the motor work harder. Clean

the condenser coils. See “Freezer Care.”

■Is the door gasket sealed all the way around? Contact a

qualified person or a technician.

■Is there enough air circulation space around the freezer?

See “Location Requirements.”

NOTE: If the problem is not due to any of the above,

remember that your new freezer will run longer than your old

one due to its high-efficiency motor.

The ice maker is not producing ice or not enough ice

(on some models)

■Has the ice maker just been installed? Wait 72 hours for full

ice production to begin. Once your freezer is cooled, the ice

maker should produce 70-120 cubes every 24 hours.

■Is the freezer temperature cold enough to produce ice?

Wait 24 hours after hookup for ice production. See “Using the

Control.”

■Is the wire shutoff arm in the OFF (arm up) position? Lower

the wire shutoff arm to the ON (arm down) position. See “Ice

Maker.”

■Is the water line shutoff valve to the freezer turned on?

Turn on the water valve. See “Connect the Water Supply.”

■Does the ice maker mold have water in it or has no ice

been produced? Be sure your freezer has been connected to

a water supply and the supply shutoff valve is turned on. See

“Connect the Water Supply.”

■Is an ice cube jammed in the ejector arm? Remove the ice

from the ejector arm with a plastic utensil. See “Ice Maker.”

■Has a large amount of ice just been removed? Allow

24 hours for ice maker to produce more ice.

■Is the control set correctly? If too little ice is produced, see

“Using the Control.”

NOTE: If not due to any of the above, there may be a problem

with the water line. Call for service.

Off-taste, odor or gray color in the ice (on some models)

■Are the plumbing connections new, causing discolored or

off-flavored ice? Discard the first few batches of ice.

■Have the ice cubes been stored too long? Throw old ice

away and make a new supply.

■Do the freezer and ice bin need to be cleaned? See

“Freezer Care.”

■Does the water contain minerals (such as sulfur)? A filter

may need to be installed to remove the minerals.

Temperature is too warm

■Are the air vents blocked? Move objects away from the air

vents. See “Ensuring Proper Air Circulation” for air vent

locations.

■Is the door opened often? Be aware that the freezer will

warm when this occurs. In order to keep the freezer cool, try

to get everything you need out of the freezer at once, keep

food organized so it is easy to find, and close the door as

soon as the food is removed.

■Has a large amount of food just been added to the

freezer? Adding a large amount of food warms the freezer. It

can take several hours for the freezer to return to the normal

temperature.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Is the control set correctly for the surrounding conditions?

See “Using the Control.”

The door will not close completely or is difficult to open

■Are food packages blocking the door? Rearrange

containers so that they fit more tightly and take up less space.

■Are the shelves and basket out of position (on some

models)? Put the shelves and basket back into their correct

positions.

■Are the gaskets dirty or sticky? Clean gaskets according to

the directions in “Freezer Care.”

■Does the freezer wobble or seem unstable? See “Adjust

the Door.”

The freezer clicks but does not run

■Has the local power failed? Unplug the freezer for

30 minutes to allow the refrigeration system to equalize.

During this time, keep the door closed whenever possible.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting.” It may save you the cost of a service call. If you

still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If You Need Replacement Parts

If you need to order replacement parts, we recommend that you

only use factory specified replacement parts. Factory specified

replacement parts will fit right and work right because they are

made with the same precision used to build every new Amana®

appliance.

To locate factory specified replacement parts in your area, call us

or your nearest designated service center.

In the U.S.A.

For assistance, installation or service call Amana® Appliances toll

free: 1-800-688-9900.

Our consultants provide assistance with:

■Features and specifications on our full line of appliances.

■Installation information.

■Use and maintenance procedures.

■Accessory and repair parts sales.

■Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■Referrals to local dealers, repair parts distributors, and service

companies. Amana® Appliances designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the Amana® appliances designated service company

in your area, you can also look in your telephone directory

Yellow Pages.

For Further Assistance

If you need further assistance, you can write to Amana®

Appliances with any questions or concerns at:

Amana Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

For assistance, installation or service toll free: 1-800-807-6777.

Our consultants provide assistance with:

■Features and specifications on our full line of appliances.

■Use and maintenance procedures.

■Accessory and repair parts sales.

■Referrals to local dealers, repair parts distributors, and service

companies. Amana® Appliances designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For Further Assistance

If you need further assistance, you can write to Amana®

Appliances with any questions or concerns at:

Amana Brand Home Appliances

Customer eXperience Center

200 – 6750 Century Ave.

Mississauga, ON L5N 0B7

Please include a daytime phone number in your correspondence.

Accessories

To order accessories, call 1-800-843-0304 or contact your

authorized Amana® Appliances dealer. In Canada, call

1-800-807-6777.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter

“Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

First 18 Months

During the first eighteen (18) months, any functional parts of this product found to be defective, will be repaired or replaced, at warran-

tor’s option, at no charge to the ORIGINAL purchaser.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any appliance

Service

requiring service outside the limited boundaries of “In Home Service”, it will be the consumer’s responsibility to transport the appliance

(at their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service”

below. Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service

must be performed by a qualified service technician.

If service is performed on the unit by anyone other than an authorized service depot, or the unit is used for commercial application, all

obligations of Danby under this warranty shall be void.

Boundaries of

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be

In Home Service

delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certified for

warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are the

responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other contents of this appliance, whether

due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its

authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees

under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages

to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of

the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions

(extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for outdoor application).

Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO BOX 1778 Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO BOX 669 Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

04/09

1-800-263-2629

SÉCURITÉ DU CONGÉLATEUR

Mise au rebut appropriée de votre vieux

congélateur ou réfrigérateur

IMPORTANT : Le problème des enfants trouvés enfermés ou

étouffés n’est pas un problème révolu. Les congélateurs ou

réfrigérateurs jetés ou abandonnés présentent des dangers,

même s’ils sont abandonnés pendant “quelques jours”

seulement. Si vous vous débarrassez de votre vieux réfrigérateur

ou congélateur, veuillez suivre les instructions suivantes pour

aider à éviter les accidents.

Avant de mettre au rebut votre vieux congélateur ou

réfrigérateur :

■Enlever les portes ou le couvercle.

■Laisser les tablettes en place, de sorte que les enfants ne

puissent pas facilement se glisser à l’intérieur.

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

Pour réduire les risques d'incendie, de choc électrique ou des blessures lors de l'utilisation du

congélateur, prendre quelques précautions fondamentales, y compris les suivantes :

AVERTISSEMENT :

CONSERVEZ CES INSTRUCTIONS

■

Brancher l'appareil sur une prise à 3 alvéoles reliée à

la terre.

■

Ne pas enlever la broche de liaison à la terre.

■

Ne pas utiliser un adaptateur.

■

Ne pas utiliser un câble de rallonge.

■

Débrancher la source de courant électrique avant

l'entretien.

■

Replacer pièces et panneaux avant de faire la remise en

marche.

■

Utiliser un produit de nettoyage ininflammable.

■

Garder les matériaux et les vapeurs inflammables, telle que

l'essence, loin du congélateur.

■

Utiliser deux ou plus de personnes pour déplacer et

installer le congélateur.

■

Garder la clé loin des enfants.

■

Enlever les portes ou le couvercle de votre vieux

congélateur ou réfrigérateur.

■

Débrancher la source de courant électrique avant

l'installation de la machine à glaçons (seulement pour

modèles prêts à recevoir une machine à glaçons).

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient un produit chimique connu par l’État de Californie pour être à l’origine de cancers.

AVERTISSEMENT : Ce produit contient un produit chimique connu par l’État de Californie pour être à l’origine de malformations

et autres déficiences de naissance.

AVERTISSEMENT

Risque de suffoquer

Enlever les portes ou le couvercle de votre vieux

congélateur ou réfrigérateur.

Le non-respect de cette instruction peut causer

un décès ou des lésions cérébrales.

INSTRUCTIONS D'INSTALLATION

Déballage

Enlèvement des matériaux d’emballage

■Enlever le ruban adhésif et la colle des surfaces du

congélateur avant de le mettre en marche. Frotter une petite

quantité de savon liquide pour la vaisselle sur l’adhésif avec

les doigts. Rincer à l’eau tiède et essuyer.

■Ne pas utiliser d’instruments coupants, d’alcool à friction, de

liquides inflammables ou de nettoyants abrasifs pour enlever

le ruban adhésif ou la colle. Ces produits peuvent

endommager la surface de votre congélateur. Pour plus de

renseignements, voir “Sécurité du congélateur”.

Nettoyage avant l’utilisation

Après avoir enlevé tous les matériaux d’emballage, nettoyer

l’intérieur du congélateur avant l’utilisation. Voir les instructions de

nettoyage à “Entretien du congélateur”.

Emplacement d’installation

IMPORTANT : Ne pas installer le congélateur près d'un four, d'un

radiateur ou d'une autre source de chaleur, ni dans un endroit où

la température baissera au-dessous de 40°F (5°C).

Vérifier la solidité du plancher avant d’installer le congélateur. Le

plancher doit supporter le poids d’un congélateur entièrement

rempli d’aliments.

Laisser un espace d’au moins 3" (7,5 cm) en haut et des deux

côtés du congélateur et de 1" (2,5 cm) entre l’arrière du

congélateur et le mur. Si le congélateur doit être contre un mur,

laisser un espace plus grand du côté des charnières pour que

la porte puisse s’ouvrir plus.

REMARQUE : Ce congélateur peut être installé côte à côte avec

un autre réfrigérateur ou congélateur. Laisser un dégagement de

3" (7,5 cm) sur le dessus et les côtés et un dégagement de

¼" (0,64 cm) entre les appareils.

AVERTISSEMENT

Risque du poids excessif

Utiliser deux ou plus de personnes pour déplacer et

installer le congélateur.

Le non-respect de cette instruction peut causer

une blessure au dos ou d'autre blessure.

Déplacement de votre congélateur :

Votre congélateur est lourd. Lors du déplacement de votre

congélateur pour le nettoyage ou un entretien, veiller à

recouvrir le plancher avec du carton ou un panneau de fibre

dur pour éviter qu'il ne subisse tout dommage. Toujours

tirer le congélateur tout droit lors du déplacement. Ne pas

incliner le congélateur d’un côté ou de l’autre ni le “faire

marcher” en essayant de le déplacer car le plancher pourrait

être endommagé.

Importants renseignements à savoir au sujet des tablettes

et des couvercles en verre :

Ne pas nettoyer les tablettes ou couvercles en verre avec de

l’eau tiède quand ils sont froids. Les tablettes et les

couvercles peuvent se briser s'ils sont exposés à des

changements soudains de température ou à un impact tel

que coup brusque. Le verre trempé est conçu pour éclater

en d’innombrables pièces minuscules. Ceci est normal. Les

tablettes et les couvercles en verre sont lourds. Les saisir à

deux mains lors de leur dépose afin d'éviter de les faire

tomber.

Risque d'explosion

Garder les matériaux et les vapeurs inflammables, telle

que l'essence, loin du congélateur.

Le non-respect de cette instruction peut causer

un décès, une explosion ou un incendie.

AVERTISSEMENT

3" (7,5 cm)

Spécifications électriques

Avant de déplacer le congélateur à son emplacement final, il est

important de vous assurer d'avoir le raccordement électrique

approprié.

Méthode recommandée de mise à la terre

Une source de courant électrique de 115 V, 60 Hz, CA seulement,

et protégée par un fusible de 15 ou 20 ampères, adéquatement

mise à la terre est nécessaire. Il est recommandé d’utiliser un

circuit distinct pour alimenter uniquement le congélateur. Utiliser

une prise de courant murale qui ne peut pas être mise hors circuit

à l’aide d’un commutateur. Ne pas employer un câble de rallonge.

REMARQUE : Avant de procéder à tout type d’installation, de

nettoyage ou de changement d’une ampoule, tourner la

commande de température à la position d'ARRÊT tel qu’illustré

puis déconnecter le congélateur de la source d'alimentation

électrique.

Portes du congélateur

OUTILLAGE NÉCESSAIRE : Clé à douille à tête hexagonale de

⁵⁄₁₆", clé à douille à tête hexagonale de ⁵⁄₈", clé à douille à tête

hexagonale de ¹⁄₄", clé à douille à tête hexagonale de ¹⁄₂", clé à

douille à tête hexagonale de ³⁄₈", tournevis Phillips n° 2, tournevis

à lame plate, clé plate de ⁵⁄₁₆", couteau à mastic plat de 2".

IMPORTANT :

■Toutes les illustrations mentionnées dans les instructions

suivantes sont incluses plus loin dans cette section après

“Étapes finales”. Les illustrations correspondent à une porte

s'ouvrant à droite (charnières installées à droite à l'usine).

■Si vous désirez seulement enlever et réinstaller les portes, voir

“Démontage - Portes et charnières” et “Réinstallation - Portes

et charnières”.

■Avant de commencer, tourner la commande à OFF (arrêt), et

retirer les aliments et tout balconnet réglable ou compartiment

utilitaire des portes.

Installation et dépose des poignées de portes

REMARQUE : Pour inverser le sens d'ouverture de la porte, retirer

la poignée et la transférer d'un côté à l'autre de la porte.

Installation de la poignée :

1. Placer la poignée sur la porte tel qu’indiqué. Voir l'illustration

de la poignée.

2. En utilisant un tournevis à lame plate, fixer la poignée sur la

porte à l’aide des quatre vis de poignée (fournies).

3. Placer les différentes parties de la garniture sur les extrémités

inférieures et supérieures de la poignée, tel qu’indiqué.

4. Appuyer fermement avec la main sur l’avant de la garniture.

Faire glisser la garniture supérieure vers le bas et la garniture

inférieure vers le haut, vers la poignée.

Retrait de la poignée :

1. Retirer la garniture supérieure et inférieure.

2. À l’aide d’un tournevis à lame plate, retirer les quatre vis et

soulever la poignée pour la retirer.

Démontage - Portes et charnières

Vis de charnière à tête hexagonale de ⁵⁄₁₆"

1. Débrancher le congélateur ou déconnecter la source de

courant électrique.

2. Ouvrir la porte du congélateur et ôter la grille de la base située

à l'avant de la partie inférieure du congélateur. Voir la grille de

la base sur l'illustration 1A.

3. Fermer la porte du congélateur; et la maintenir fermée

jusqu'au moment où on est prêt à la séparer de la caisse de

l'appareil.

REMARQUE : Prévoir un support additionnel des portes

pendant la réinstallation des charnières. La force d'attraction

des aimants des portes ne suffit pas à les maintenir en place.

4. Retirer les pièces de la charnière supérieure - voir l'illustration

1B de la charnière supérieure.

5. Soulever la porte du congélateur pour la séparer de la

charnière inférieure et de la caisse et la conserver à part.

6. Retirer les trois vis de charnière à tête hexagonale et la

charnière inférieure. Voir l'illustration 1C de la charnière

inférieure.

AVERTISSEMENT

Risque de choc électrique

Brancher sur une prise à 3 alvéoles reliée à la terre.

Ne pas enlever la broche de liaison à la terre.

Ne pas utiliser un adaptateur.

Ne pas utiliser un câble de rallonge.

Le non-respect de ces instructions peut causer

un décès, un incendie ou un choc électrique.

Inversion du sens d'ouverture des portes

(facultatif - sur certains modèles)

IMPORTANT : Si vous souhaitez inverser le sens d’ouverture des

portes, suivre les instructions de la section “Inversion du sens

d'ouverture des portes (facultatif - sur certains modèles)”. S'il

n'est pas nécessaire de changer l'orientation des portes, voir

“Réinstallation - Portes et charnières”.

Caisse

1. Enlever les bouchons d'obturation des trous de charnière au

sommet de la caisse; transférer ceux-ci dans les trous de

charnière du côté opposé. Voir l'illustration 2.

2. Retirer les vis de butée de porte de la charnière. Voir

l'illustration 1C de la charnière inférieure.

3. Retirer l'écrou de l'axe de la charnière et l'axe du support de

charnière.

4. Faire pivoter le support de charnière pour installer la porte sur

le côté opposé de la caisse. Voir l’illustration 3.

5. Réinstaller l'écrou de l'axe de la charnière et l'axe du support

de charnière. L'axe de la charnière doit pointer vers le haut

lorsque le support de charnière est installé sur la caisse.

6. Inverser la butée de porte de façon à ce que les fraisures

soient alignées avec les trous des vis sur la charnière. Voir

l'illustration 4.

7. Réinstaller les vis de butée de porte. Voir l’illustration 3.

8. Réinstaller le support de charnière sur la caisse à l'aide des

trois vis de charnière à tête hexagonale.

Réinstallation - Portes et charnières

REMARQUE : Si on inverse le sens d'ouverture des portes,

considérer l'image symétrique.

1. Replacer les pièces de la charnière inférieure tel qu'illustré et

serrer les vis. Voir l'illustration 1C de la charnière inférieure.

Réinstaller la porte du congélateur.

REMARQUE : Prévoir un support additionnel des portes

pendant la réinstallation des charnières. La force d'attraction

des aimants des portes ne suffit pas à les maintenir en place.

2. Assembler les pièces de la charnière supérieure (voir

l'illustration 1B de la charnière supérieure). Ne pas

complètement serrer les vis.

3. Aligner la porte de façon à ce que la ligne inférieure soit de

niveau avec la caisse. Serrer toutes les vis.

Étapes finales

1. Inspecter tous les trous. Vérifier que tous les bouchons

d'obturation et vis sont en place. Réinstaller le couvercle de la

charnière supérieure. Voir l'illustration 1B de la charnière

supérieure.

2. Réinstaller la grille de la base. Voir la grille de la base sur

l'illustration 1A.

3. Brancher sur une prise à 3 alvéoles reliée à la terre.

4. Réinitialiser les commandes. Voir “Utilisation de la

commande”.

5. Réinstaller toutes les pièces amovibles des portes et remettre

les aliments dans le compartiment de congélation.

AVERTISSEMENT

Risque de choc électrique

Brancher sur une prise à 3 alvéoles reliée à la terre.

Ne pas enlever la broche de liaison à la terre.

Ne pas utiliser un adaptateur.

Ne pas utiliser un câble de rallonge.

Le non-respect de ces instructions peut causer

un décès, un incendie ou un choc électrique.

1-1

Poignée

A. La garniture de la poignée de porte

Vis de poignée

Poignée

A. Bouchons d’obturation des trous

de charnière de la caisse

Vis de scellement

de poignée de porte

Inversion du sens d'ouverture de la porte (facultatif)

Butée de porte de la

charnière - côté droit

Butée de porte de la

charnière - côté gauche

Dépose et réinstallation

de la porte

Charnière supérieure

Charnière inférieure

A. Couvercle de charnière supérieure

B. Vis de charnière à tête hexagonale

C. Charnière supérieure

Grille de la base

A. Vis de butée de porte

B. Butée de porte

C. Axe de charnière

E. Vis de charnière à tête

hexagonale de

D. Écrou de l'axe de charnière

A. Vis de butée de porte

B. Butée de porte

C. Axe de charnière

E. Vis de charnière à tête

hexagonale de

D. Écrou de l'axe de charnière

Ajustement de porte

1. Localiser les 2 pieds de nivellement à l’avant joints aux

matériaux d’emballage.

2. Visser ces pieds dans les trous avant, à la base du

congélateur. L’arrière du congélateur repose sur deux appuis

fixes.

3. Ajuster les pieds avant juste assez pour soulever le meuble

au-dessus du sol.

REMARQUE : Si votre modèle est équipé de roulettes, les

pieds avant doivent être suffisamment abaissés pour mettre

les roulettes hors service et s’assurer que le congélateur ne

roule pas vers l’avant lorsqu’on ouvre la porte.

4. Placer un niveau au sommet du congélateur d’abord de côté à

côté, puis de l’avant à l’arrière. Tourner le pied dans le sens

antihoraire pour réhausser un coin. Tourner le pied dans le

sens horaire pour abaisser un coin.

5. Répéter l’étape 4 jusqu’à ce que le congélateur soit d’aplomb.

6. Lorsque le congélateur est complètement rempli d’aliments,

revérifier avec un niveau comme à l’étape 4.

UTILISATION DU CONGÉLATEUR

Pour s’assurer d’une circulation d’air appropriée

Pour s’assurer d’avoir des températures appropriées, il faut

permettre à l’air de circuler dans le congélateur. Comme l’indique

l’illustration, l’air froid pénètre par la paroi du congélateur et se

déplace vers le bas. L'air recircule ensuite par l'évent près de la

base.

Ne pas obstruer l’une ou l’autre de ces ouvertures d’aération avec

des emballages d'aliments. Si les ouvertures d’aération sont

bloquées, le courant d’air sera coupé et des problèmes de

température et d’humidité peuvent survenir.

IMPORTANT : Pour empêcher le transfert d’odeurs et

l’assèchement des aliments, envelopper ou recouvrir

hermétiquement les aliments.

Utilisation de la commande

Tourner la commande de température du congélateur à 4. Ce

réglage est destiné à maintenir la température à ou près de 0º F

(–17,8º C) dans des conditions normales d’utilisation.

Laisser le congélateur refroidir pendant 6 à 8 heures avant de le

remplir d’aliments congelés. Laisser le congélateur refroidir une

nuit avant d’ajouter de grandes quantités d’aliments non

congelés. Ne pas ajouter plus de 2 à 3 lb (907 à 1350 g)

d’aliments non congelés par pied cube (28,32 L) d’espace de

congélation.

REMARQUE : Lors de la mise en marche initiale du congélateur,

le compresseur fonctionne constamment, jusqu’à ce que le

congélateur soit refroidi. Ce refroidissement peut demander

jusqu’à 6 ou 8 heures (ou plus), selon la température ambiante et

la fréquence des ouvertures de la porte du congélateur. Lorsque le

congélateur est refroidi, le compresseur s’arrête et recommence

au besoin, pour maintenir le congélateur à la température

appropriée.

L’extérieur du congélateur peut paraître tiède. Ceci est normal. Le

concept et la fonction principale du congélateur sont d’éliminer la

chaleur des emballages et de l’espace d’air à l’intérieur du

congélateur. La chaleur est transférée à l’air de la pièce, ce qui

rend l’extérieur du congélateur tiède.

Ajustement de la commande de température

■Tourner la commande à un chiffre plus élevé pour des

températures plus froides.

■Tourner la commande à un chiffre plus bas pour des

températures moins froides.

REMARQUE : L’icône en forme de petit flocon de neige

représente le numéro 1 ou le réglage le moins froid. L’icône en

forme de gros flocon de neige représente le numéro 6 ou le

réglage le plus froid.

Congélation rapide (sur certains modèles)

À ce réglage, le congélateur fonctionne continuellement et la

température descend au plus bas niveau possible. Pour l’activer,

régler le bouton de commande à l'icône en igloo, le réglage de

congélation rapide. Utiliser cette caractéristique juste avant

d’ajouter de grandes quantités d’aliments non congelés. Pour la

meilleure qualité alimentaire, ne pas dépasser 3 livres (1350 g) par

pied cube (28,32 L). Remettre la commande au réglage normal

après 24 à 48 heures.

La page charge ...

Danby DUF570WDD Mode d'emploi

Marque: Danby

Modèle: DUF570WDD

Catégorie: Congélateurs

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Danby DUF570WDD User guide