Yamaha TX-680RDS Le manuel du propriétaire

Catégorie
Destinataire
Taper
Le manuel du propriétaire
TX-680RDS
Natural Sound AM/FM Stereo Tuner
Syntonisateur AM/FM stéréo de la série “Natural Sound”
“Natural Sound” MW/UKW-Stereo-Tuner
Natural Sound AM/FM stereotuner
Sintonizzatore stereo AM/FM a suono naturale
Sintonizador estéreo de AM/FM de sonido natural
Natural Sound Stereo Tuner
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
2
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
ACCESSOIRES FOURNIS
Après le déballage, vérifier que les pièces suivantes sont incluses.
MITGELIEFERTE ZUBEHÖRTEILE
Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
MEDFÖLJANDE TILLBEHÖR
Kontrollera efter det apparaten packats upp att följande delar finns med.
ACCESSORI IN DOTAZIONE
Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
ACCESORIOS INCLUIDOS
Desembale el aparato y verificar que los siguientes accesorios están en la caja.
BIJGELEVERDE ACCESSOIRES
Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
U.K. model
Modèle pour le Royaume-Uni
Großbritannien-Modell
Brittisk modell
Modello per la Gran Bretagna
Modelo para R.U.
Modellen voor Groot-Brittannië
AM Loop Antenna/Indoor FM Antenna
Cadre-antenne AM/Antenne FM intérieure
MW-Rahmenantenne/UKW-Innenantenne
AM ramantenn/FM inomhusantenn
Antenna AM ad anello/Antenna FM per interni
Antena de cuadro de AM/Antena FM interior
AM Lusantenne/FM Binnenantenne
Audio connection cord
Câble de connexion audio
Audio-Anschlußkabel
Audio anslutningssladdar
Cavo di collegamento audio
Cable de conexión de audio
Audio aansluitkabel
Europe model
Modèle pour l’Europe
Europa-Modell
Europeisk modell
Modello per l’Europa
Modelo para Europa
Modellen voor Europa
AM Loop Antenna
Cadre-antenne AM
MW-Rahmenantenne
AM ramantenn
Antenna AM ad anello
Antena de cuadro de AM
AM Lusantenne
Indoor FM Antenna
Antenne FM intérieure
UKW-Innenantenne
FM inomhusantenn
Antenna FM per interni
Antena FM interior
FM Binnenantenne
FEATURES
Multi-Functions for RDS Broadcast Reception
40 Station Random Access Preset Tuning
Station Name Storing Capability
Automatic Preset Tuning for RDS Stations
Multi-Status Station Memory
Preset Station Shifting Capability
Rotary Encoder Tuning
Direct PLL Synthesizer Tuning
2-Position IF Mode Select Button
BLEND Button
Remote Control Capability (Optional)
CONTENTS
Supplied Accessories......................................................2
Caution............................................................................3
Connections....................................................................4
Tuning Operations ..........................................................7
Preset Tuning..................................................................9
Receiving RDS Stations................................................13
Remote Control Transmitter (Separate purchase)........18
Troubleshooting............................................................19
Specifications................................................................20
3
English
Thank you for selecting this YAMAHA stereo tuner
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. This unit is a sophisticated stereo tuner. To assure proper
operation and the best possible performance, please read
this manual carefully.
2. Choose the installation location for the unit carefully.
Avoid placing it in direct sunlight or close to a source of
heat. Also avoid locations subject to vibration and
excessive dust, heat, cold or moisture. Keep it away from
such sources of hum as transformers or motors.
3. Do not open the cabinet, because this may result in
damage to the unit or electrical shock. If a foreign object
should get into the unit, contact your local dealer.
4. When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
5. To prevent lightning damage, disconnect the AC power
plug and disconnect the antenna cable when there is an
electrical storm.
6. When disconnecting the power plug from the wall outlet,
always pull directly on the plug; never pull the cord itself.
7. Do not use force when operating switches and other
controls.
8. When moving the unit, be sure to first disconnect the
power plug and disconnect all wires connected from the
unit to other equipment.
9. Do not attempt to clean this unit with chemical solvents,
because this may damage the finish. Use a clean, dry
cloth.
10.Be sure to read the “TROUBLESHOOTING” section of this
manual for advice on common operating errors before
concluding that the unit is faulty.
11.Keep this manual in a safe place for future reference.
IMPORTANT
Please record the serial number of this unit in the space
below.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug. Proceed as follows: the wire
which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK. The
wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
ANTENNA CONNECTIONS
Each antenna should be connected to the designated terminals correctly, referring to the following figure.
Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal
strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience
poor reception quality, an outdoor antenna may result in improvement.
U.K. MODEL
EUROPE MODEL
4
CONNECTIONS
Ground
Outdoor AM antenna
AM loop
antenna
(included)
Indoor FM
antenna
(included)
Outdoor FM antenna
300-ohm
feeder
75-ohm/300-ohm
antenna adapter
75-ohm
coaxial cable
75 UNBAL.
75-ohm
antenna
adapter
FM ANT GND AM ANT
Ground
Outdoor AM antenna
AM loop
antenna
(included)
Indoor FM
antenna
(included)
Outdoor FM antenna
75-ohm
antenna
adapter
300-ohm
feeder
75-ohm/300-ohm
antenna adapter
75-ohm
coaxial cable
75 UNBAL.
FM ANT GND AM ANT
m Optional outdoor FM antenna
Consult with your dealer or authorized service center about the
best method of selecting and erecting an outdoor FM antenna.
The choice of the feeder cable is also important. Flat ribbon-
shaped twin-lead cable performs well electrically, and is
cheaper and somewhat easier to handle when routing it
through windows and around rooms. Coaxial cable is more
expensive, does a much better job of minimizing interference,
is less prone to the effects of weather and close-by metal
objects, and is nearly as good a signal conductor as feeder
cable, particularly for foam-type coaxial cables. Coaxial cable
is somewhat more difficult to install at the point where the
cable enters the building. If coaxial cable is selected, make
sure the antenna is designed to be used with that type of
cable.
* Use a 75-ohm/300-ohm antenna adapter (not included) or a
75-ohm antenna adapter (not included) for connections.
300-ohm feeder cable 75-ohm coaxial cable
75-ohm/300-ohm antenna adapter
Notes for FM antenna installation
To minimize automobile ignition noise, locate the antenna
as far from heavy traffic as possible.
Keep the feeder cable or coaxial cable as short as possible.
Do not bundle or roll up excess cable.
The antenna should be at least two meters (6.6 feet) from
reinforced concrete walls or metal structures.
5
English
Connecting the indoor FM antenna
(U.K. model) (Europe model)
*If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit.
Connecting the AM loop antenna
12(U.K. model) (Europe model)
* The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
Positioning of the AM loop antenna/indoor FM antenna (U.K. model only)
After the connections, place the indoor FM antenna to the position where the best reception is obtained, and next, orient the AM
loop antenna so that the best reception is obtained. However, if the orientation of the AM loop antenna moves the pre-positioned
indoor FM antenna, you can separate the antennas with your hands easily and place each antenna to the best position.
1
3
2
300-ohm feeder
cable
75-ohm coaxial
cable
75-ohm antenna
adapter
75-ohm coaxial
cable
Orient so that the best
reception is obtained.
Orient so that the best
reception is obtained.
m Optional outdoor AM antenna
In steel buildings or at a great distance from the transmitter, it
may be necessary to install an outside long wire antenna.
GND terminal
For maximum safety and minimum interference, connect
the GND terminal to a good earth ground. A good earth
ground is a metal stake driven into moist earth.
6
CONNECTIONS TO THE AMPLIFIER
Before making any connections, switch OFF the power to
this unit and the amplifier or other component.
Be sure that the connections from the left (“L”) and right
(“R”) OUTPUT terminals are connected to the
corresponding (left and right) input terminals of the amplifier
or other component.
*This unit has a remote control sensor. It receives signals
from the separately purchased remote control transmitter
or a remote control transmitter provided with a YAMAHA
amplifier.
OUTPUT
RL
TUNER
L
R
75 UNBAL.
FM ANT GND AM ANT
Amplifier
Connection cord (included)
This unit
To AC outlet
Remote control sensor
1
2 Select the reception band (FM or AM) while watching
the display.
3
4
For FM reception, set the MODE, BLEND and IF MODE
buttons as desired. (Refer to page 8 for details.)
5 Tune to a desired station.
To tune to a higher frequency, slightly turn the control
to the right. To tune to a lower frequency, slightly turn
the control to the left.
6 If the station where tuning search stopped is not the
desired one, turn again.
* If the tuning search does not stop at the desired
station, change to the MANUAL TUNING method as
described on the following page.
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).
AUTOMATIC TUNING
7
English
TUNING OPERATIONS
Display information
Displays the band and frequency of the received station.
* If an RDS station is received, the frequency is then
replaced by the station name. (However, if the PS data
cannot be received within 5 seconds, “NO PS” flashes,
and then it returns to the frequency display.)
Refer to page 14 for details.
Illuminates when an FM stereo broadcast is received in
stereo.
Indicates the signal level of the received station.
POWER
FM/AM
TUNING MODE
AUTO/MAN’L
WIDE
AUTO TUNING
0 10050
STEREO
TUNING
FM MHz
WIDE
AUTO TUNING
0 10050
STEREO
➀➁
1
23
5, 6
4
AM
FM
or
MODE button
Normally, press this button so that the “AUTO ST” indicator
illuminates. When receiving an FM stereo broadcast in this
mode, it is received in stereo automatically.
When receiving a weak FM broadcast, press this button so that
the “AUTO ST” indicator goes out. It is received in monaural,
however, you can obtain higher signal quality.
BLEND button
If a noisy FM stereo broadcast is received, press this button so
that the “BLEND” indicator illuminates. The left and right
channels are blended accordingly to reduce the noise and
improve the reception signal quality. When the MODE button
is set to the monaural mode (so that the “AUTO ST” indicator
does not illuminate), the BLEND function will not operate even
if the BLEND indicator illuminates.
IF MODE button
This button is used to vary the bandpass of the FM
intermediate frequency (IF) between WIDE and NARROW.
If the reception signal is strong, press this button so that the
“WIDE” indicator illuminates (to obtain distortion-free sound).
When the reception signal is weak, or when the desired station
is interfered with by adjacent stations, press this button so that
the “NARROW” indicator illuminates (to increase the
selectivity).
1 Follow steps 1 and 2 on the previous page.
2
3 For FM reception, set the MODE, BLEND and IF
MODE buttons as desired.
4 Tune to a desired station manually.
MANUAL TUNING
8
Other functions to improve FM reception signal quality
TUNING MODE
AUTO/MAN’L
WIDE
0 10050
STEREO
TUNING
2
4
3
MODE
AUTO ST/MONO
AUTO ST
BLEND
BLEND
IF MODE
NARROW/WIDE
WIDE
NARROW
or
“AUTO TUNING” goes off.
1 Tune to a desired station.
(Refer to pages 7–8 for tuning procedure.)
2 Select a desired page (A – E) of preset station buttons
while watching the display.
3
4 Press a preset station button before “MEMORY”
goes off from the display.
* In the same way, program other stations to A2, A3 ... A8.
* You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.
11 Select the page of preset station buttons.
22
Select the desired preset station button.
Notes
A new setting can be programmed in place of the former
one.
For FM reception, the settings of the MODE, BLEND and
IF MODE buttons are stored along with the station
frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet for more than
1 year.
For using an external timer
When making timer setting by using an external timer, store
the station to be called onto A1, and be sure to turn the power
off while the preset station on A1 is being called.
9
English
MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can
select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be
stored.
PRESET TUNING
To store stations
To recall a preset station
3
2, 11 4, 22 (Preset station buttons)
A/B/C/D/E
FM
MEMORY
MAN’L/AUTO FM
FM
MEMORY
A/B/C/D/E
FM
Flashes on and off
for about 5 seconds.
A/B/C/D/E 1 2345678
PRESET STATIONS
A/B/C/D/E 1 2345678
PRESET STATIONS
FM MHz
WIDE
AUTO TUNING
0 10050
STEREO
Shows the displayed station has been
programmed to A1.
10
1 Tune to a desired station.
(Refer to pages 7–8 for tuning procedures.)
2
In FM reception:
A station name is displayed or “NO PS” flashes.
* If “NO PS” flashes, proceed to the next step while
flashing. If “NO PS” disappears before proceeding to the
next step, press the FREQ/PS/PTY button again.
In AM reception:
“– – – – – – – –” flashes on the display.
3
4 Select the first letter or numeral to be memorized.
* By turning the TUNING control, the display will change
letters and numerals in sequence.
5 When the desired letter or numeral appears, press the
SHIFT button to proceed to the selection of the next
letter or numeral.
6 Repeat steps 4 and 5 for other letters and/or numerals,
if necessary.
7 After the naming is finished, follow steps 2–4 of “To
store stations” on the previous page.
Note
If you store a name to an RDS station which has PS data, the
name of your giving takes priority and is shown on the
display.
Character table
The following letters, numerals and symbols are selected on
this unit.
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z a b c d e f g h i j k l m n o p q r s t u v
w x y z , – . / 0 1 2 3 4 5 6 7 8 9 . ; á à é è í ì ó
ò ú ù â ä ê ë î ï ô ö û ü ñ ç s g a Ö Å G e n O ã
å n _
“_” indicates a blank space.
To store stations with names of your own giving
You can store a station with a name of your own giving. As many as 8 letters and/or numerals can be selected for naming. By using
this function, you can easily find a certain station even if you are not sure of that station’s frequency.
You can give names to all preset stations.
_
´
ç
s
^
^
^
^
_
.
4
2
3, 5
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
PS/PTY SEEK
FREQ/PS PTY
SHIFT
ENTER
Flashes.
TUNING
“A” will flash on the second
letter or numeral position.
11
English
AUTOMATIC PRESET TUNING
You can also make use of an automatic preset tuning function for RDS stations only. By this function, this unit performs automatic
tuning and stores RDS stations with strong signals sequentially. Up to 40 stations are stored automatically to the preset station
buttons in the same way as in the manual preset tuning method on page 9.
To store stations
1
2
Flashes.
3 Slightly turn the TUNING control to the right (or to the
left).
* When turned to the right, automatic tuning is
performed toward higher frequencies. When turned
to the left, automatic tuning is performed toward lower
frequencies.
This unit performs automatic tuning and received RDS
stations are programmed to A1, A2 ... A8 sequentially.
* If more than 8 stations are received, they are also
programmed to other pages (B, C, D and E) of preset
station buttons in that order.
When the automatic preset tuning is finished
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure of the section “To recall a preset
station” on page 9.
To recall a preset station
Simply follow the procedure of the section “To recall a preset
station” on page 9. A recalled station is shown by the
frequency or station name on the display.
Notes
The automatic preset tuning search will be performed
through all RDS network frequencies until stations are
stored up to E8. If the number of received stations is not
enough to be stored up to E8, the search is finished
automatically after searching through all frequencies.
With this function, the settings of the MODE, BLEND and
IF MODE buttons are stored along with stations.
With this function, only RDS stations with sufficient signal
strength are stored automatically. If the station you want
to program is weak in signal strength, tune to it in
monaural manually and program it by following the
procedure of the section “To store stations” on page 9.
* There may be a case that this function cannot receive a
station which could be received by the automatic tuning
method. This is because this function receives a large
volume of PI (Program Identification) data along with the
station.
You can replace a preset station by another FM or AM
station manually by simply following the procedure of the
section “To store stations” on page 9.
Press and
hold for about
3 seconds.
1
3
2
FM/AM
FM
MEMORY
MAN’L/AUTO FM
FM MHz
MEMORY AUTO ST
WIDE
AUTO TUNING
0 10050
STEREO
TUNING
12
1 Recall the preset station on E1 (by following the method
of “To recall a preset station” on page 9).
2
3 Next, recall the preset station on A5 by following the
same method with step 1.
4
When flashing is stopped, the exchange of stations is
completed.
EXCHANGING PRESET STATIONS
You can exchange the places of two preset stations each other by easy operations.
Example)
If you want to shift the preset station on E1 to A5, and vice
versa.
Press and hold
for about 3
seconds.
Flashes.
Flashes.
Flashes.
4
2
MEMORY
MEMORY
FM MHz
MEMORY AUTO S
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
MEMORY
13
English
RECEIVING RDS STATIONS
RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations
using this system transmit an inaudible stream of data in addition to the normal radio signal.
RDS data contains various information, such as AF (Alternative Frequencies for the same program station), PI (Program
Identification), PS (Program Service station name), PTY (Program Type name), etc.
RDS function is carried out among the network stations.
* This unit utilizes AF, PI, PS and PTY to receive RDS broadcast stations.
Displaying RDS data
This unit can be turned into the following two modes to display RDS data.
PS (Program Service station name) mode:
Displays the name of the RDS station now being received instead of the frequency.
PTY (Program Type name) mode:
Displays the program type of the RDS station now being received. There are 15 program types to classify RDS stations as follows.
News:
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Current affairs:
Topical program expanding or enlarging
upon the news, generally in different
presentation style or concept, including
documentary debate, or analysis
Information:
Program whose purpose is to impart advice
in the widest sense, including meteorological
reports and forecasts, consumer affairs,
medical help, etc.
Sport:
Program concerned with any aspect of sport.
Education:
Program intended primarily to educate, of
which the formal element is fundamental.
Drama:
All radio plays and serials.
Culture:
Programs concerned with any aspect of
national or regional culture, including
religious affairs, philosophy, social science,
language, theatre, etc.
Science:
Programs about the natural sciences and
technology.
Varied:
Used for mainly speech-based programs
usually of light-entertainment nature, not
covered by above categories. Examples are:
quizzes, panel games, personality interviews,
comedy and satire.
Pop:
Commercial music, which would generally be
considered to be of current popular appeal,
often featuring in current or recent record
sales charts.
Rock:
Contemporary modern music, usually written
and performed by young musicians.
M.O.R.:
(Middle of the Road Music). Common term to
describe music considered to be “easy-
listening”, as opposed to Pop, Rock or
Classical. Music in this category is often but
not always, vocal, and usually of short
duration (<5 min.)
Light classics:
Classical Musical for general, rather than
specialist appreciation. Examples of music in
this category are instrumental music, and
vocal or choral works.
Serious classics:
Performances of major orchestral works,
symphonies, chamber music etc., and
including Grand Opera.
Other music:
Musical styles not fitting into any of the
above categories. Particularly used for
specialist music, of which Jazz, Rhythm &
Blues, Folk, Country, and Reggae are
examples.
BBC R3
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
MOR M
LIGHT M
CLASSICS
OTHER M
14
To turn the unit into the PS mode or PTY mode
Press the FREQ/PS/PTY button. Whenever pressed, the mode changes into the PS mode, PTY mode and returns to usual mode in
turn.
* When an RDS station is received, the display is automatically turned into the PS mode. Do not press the FREQ/PS/PTY button
until the display is turned into the PS mode. If the button is pressed before the display mode is changed, it may occur that “NO
PS” flashes on the display. This is because the unit has not received all of the RDS data on the station yet.
PS mode The name of the station being received is displayed.
(If you had stored a name of your own giving to the station,
the name is displayed.)
If the station is not an RDS station, “NO PS” flashes on the
display and then returns to usual mode.
PTY mode A program type for the station being received is displayed.
If the RDS station does not employ the PTY data service,
“NO PTY” flashes on the display and then returns to the PS
mode.
If the station is not an RDS station, “NO PTY” flashes on the
display and then returns to usual mode.
Usual mode The frequency of the station being received is displayed.
(If you had stored a name of your own giving to the station,
the name is displayed.)
Note
When PS or PTY data reception is not possible due to poor reception conditions, “NO PS” or “NO PTY” flashes on the display in
each mode. In such a case, use the BLEND, IF MODE and/or MODE buttons to improve sound quality. After that, when you
changes to the PS or PTY mode, PS or PTY data will be displayed.
PS/PTY SEEK
FREQ/PS PTY
SHIFT
ENTER
1
2 Turn the unit into the PS mode.
* If “NO PS” flashes, proceed to the next step while flashing.
If “NO PS” disappears before you proceed to the next step,
press the FREQ/PS/PTY button again.
3
4 Select the first letter or numeral of the station name.
* By turning the TUNING control, the display will change
letters and numerals in sequence.
* If you will not input the second letter, skip to step 7.
5 When the first letter or numeral of the station name
appears, press the SHIFT button to proceed to the
selection of the next letter or numeral.
6 Repeat steps 4 and 5 for other letters and/or numerals,
if necessary.
7 When inputting the name is finished, press the ENTER
button.
8
The unit begins searching for the station, and it is
continued until the station is found.
You do not have to input a full name for searching
for the station
You may input only the first letter of the station name. If doing
so, you can skip steps 5 and 6. In step 8, the unit searches
for and calls a nearest station which has the letter you input. If
the station is not the desired one, turn the TUNING control
again. The unit will begin searching for another station which
has the same letter.
To cancel this function
Press the AF, FREQ/PS/PTY, SHIFT, ENTER, FM/AM or
MEMORY button.
Notes
If no station is found by this function after searching all
preset stations, “NO PS” flashes for about 3 seconds on
the display, and then it returns to the mode which had
been obtained before the searching was performed.
This function is useful especially for calling a station with
weak signals which cannot be received by the automatic
tuning method. By only storing such a station, you can call
it any time easily.
15
English
Calling a preset RDS station by the station name (PS SEEK)
You can call a desired RDS station stored in this unit by only inputting the name of the station in the PS mode. By this operation,
this unit searches all preset stations for the station. You do not have to input a full name, even only the first letter can be used for
calling. As many as 8 letters and/or numerals can be selected for inputting a name.
* If you had stored an FM station other than an RDS station with a name of your own giving, it can also be called by inputting the
name.
4, 8
2
1
7
3, 5
FM/AM
FM
PS/PTY SEEK
FREQ/PS PTY
SHIFT
ENTER
A station name is
displayed or “NO PS”
flashes.
“A” will flash on the second
letter or numeral position.
The name is
illuminated.
Flashes
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
ENTER
TUNING
TUNING
Slightly turn.
16
Calling a preset RDS station by the program type (PTY SEEK)
By designating a program type, the unit automatically searches all preset stations for RDS stations of that program type.
* There are 15 program types to classify RDS stations. For details, refer to page 13.
1 Turn the unit into the PTY mode.
* If “NO PTY” flashes, proceed to the next step while
flashing. If “NO PTY” disappears before you proceed to the
next step, press the FREQ/PS/PTY button once or twice.
2
3 Select the desired program type.
* By turning the TUNING control, the display will change
program types in sequence.
4 When the desired program type appears, press the
ENTER button.
5
The unit begins searching all preset stations, and calls a
station of the program type if such a station is found.
* When the TUNING control is turned clockwise, the search
is performed from “A1” toward higher numbers of the
preset stations (A1, A2 ... A8, B1, B2, ...). If, however,
“A3” is currently being called for example, the search
begins from the next station “A4”.
When the TUNING control is turned counterclockwise, the
search is performed in reverse order.
If the called station is not the desired one, turn the TUNING
control again to search for another station of the same
program type.
To cancel this function
Press the AF, FREQ/PS/PTY, SHIFT, ENTER, FM/AM or
MEMORY button.
Note
If no station is found by this function, after searching all preset
stations, “NO PTY” flashes for about 3 seconds on the
display, and then it returns to the mode which had been
obtained before the searching was performed.
3, 5
1
4
2
PS/PTY SEEK
FREQ/PS PTY
SHIFT
ENTER
Press once or twice
until a program type is
displayed or “NO PTY”
flashes.
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
ENTER
The program type of the station now being
received or “NEWS” flashes on the display.
PS/PTY SEEK
FREQ/PS/PTY
SHIFT
ENTER
ENTER
Lights up.
TUNING
TUNING
Slightly turn.
17
English
Calling the best quality RDS station which broadcasts the
same program (AF SEEK)
This function automatically searches for and calls another RDS station of the best reception quality which broadcasts the same
program now you are listening to.
This function utilizes AF (Alternative Frequencies for the same program station) and PI (Program Identification) of RDS data service.
The search is carried out among the RDS network stations.
1 Tune to a desired RDS station.
* Wait for about 10 seconds before proceeding to the
next step. This is for making this unit carry out
searching more stations.
2
The unit searches network stations for other stations with the
same program.
* If the station is not an RDS station, or there is no other
station with the same program, “NO AF” flashes.
Stations with the same program are all stored and
numbered from the best quality station in sequence.
When the search is finished, the best quality station is
called.
3 If desired, you can call the second station by pressing
the AF button.
Whenever the AF button is pressed, stored stations are
called in sequence.
When pressed after the last station is selected, the first one
is restored.
To cancel this function
Press a button other than the AF button.
All of the stored stations will be also cleared.
AF
AF
ENTER
2, 3
18
REMOTE CONTROL TRANSMITTER
(separate purchase)
Functions
This unit has a remote control sensor. It receives signals from a remote control transmitter provided with a YAMAHA amplifier.
Remote control transmitter operation range
Notes
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid
direct lighting.
30°
30°
Remote control
sensor
Within approximately
6 m (19.7 feet)
Amplifier (purchase)
Remote control sensor
19
English
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
Crackling sounds from time to time
(especially in weak signal areas).
FM stereo reception is noisy.
The STEREO indicator flickers and
reception is noisy.
There is distortion and clear reception
cannot be obtained even with a good FM
antenna.
No stereo effect even with a stereo
broadcast.
A desired station cannot be tuned in with
Automatic tuning.
Previously preset stations can no longer
be tuned in.
Insufficient sensitivity.
A desired station cannot be tuned in with
Automatic tuning.
There are continuous crackling and
hissing noises.
There are buzzing and whining noises
(especially in the evening).
CAUSE
Ignition noise from passing vehicles.
Noise from thermostats or other electrical
equipment.
Because of the characteristics of FM stereo
broadcasts, this is limited to cases where
the transmitter is far away or the antenna
input is poor.
Insufficient antenna input.
Not tuned correctly.
There is multipath interference.
The TUNING MODE button is set to the
manual tuning mode.
The station is too weak.
The tuner has been unplugged for a long
period.
Weak signal or loose antenna connections.
These noises result from lightning,
fluorescent lamps, motors, thermostats and
other electrical equipment.
Another station is interfering with the
received station.
A television set is being used nearby.
REMEDY
The FM antenna should be put up as high
as possible, away from the road, and a
coaxial cable used.
Attach a noise suppressor to the equipment
causing the noise.
Check the antenna connections.
Try using a high quality directional FM
antenna.
Set the TUNING MODE button to the
manual tuning mode.
Use an antenna appropriate for the
reception condition in your area.
Tune again.
Adjust antenna placement to eliminate multi-
path interference.
Set the button properly.
Use the manual tuning mode.
Set the IF MODE NARROW/WIDE button
correctly.
Use a high quality directional FM antenna.
Repeat the presetting procedure.
Tighten the AM loop antenna connections
and rotate it for best reception.
Use the manual tuning mode.
Use an outdoor antenna and a ground wire.
This will help somewhat but it is difficult to
eliminate all noises.
This is impossible to remedy.
Relocate this unit away from the TV.
FM
AM
20
SPECIFICATIONS
FM SECTION
Tuning Range...................................................87.5 to 108 MHz
50 dB Quieting Sensitivity (IHF) [U.K. model]
75 ohms Mono ........................................1.55 µV (15.1 dBf)
75 ohms Stereo (NARROW) ......................21 µV (37.7 dBf)
Usable Sensitivity
[U.K. model]
75 ohms, 1 kHz, 100% mod. (30 dB S/N Quieting)
...................................................................0.8 µV (9.3 dBf)
[Europe model] (DIN)
75 ohms Mono (S/N 26 dB)......................................0.8 µV
75 ohms Stereo (S/N 46 dB) .....................................22 µV
Image Response Ratio
[U.K. model].................................................................40 dB
[Europe model] ............................................................75 dB
IF Response Ratio
[U.K. model].................................................................90 dB
[Europe model] ............................................................75 dB
Spurious Response Ratio..................................................70 dB
AM Suppression Ratio.......................................................55 dB
Capture Ratio ...................................................................1.5 dB
Alternate Channel Selectivity (NARROW)
[U.K. model].................................................................85 dB
Selectivity (two signals, 40 kHz Dev., ±300 kHz, NARROW)
[Europe model only].....................................................70 dB
Signal-to-Noise Ratio
[U.K. model] (IHF)
Mono..........................................................................90 dB
Stereo........................................................................85 dB
[Europe model] (DIN-NOISE RMS)
Mono (40 kHz Dev.)...................................................83 dB
Stereo (40 kHz Dev.) ................................................79 dB
Harmonic Distortion (1 kHz, WIDE)
[U.K. model]
Mono/Stereo..................................................0.02%/0.03%
[Europe model (40 kHz Dev.)]
Mono/Stereo..................................................0.02%/0.03%
Stereo Separation (WIDE)
[U.K. model].......................................................1 kHz 52 dB
[Europe model (40 kHz Dev.)]...........................1 kHz 45 dB
Frequency Response
[U.K. model]
30 Hz to 13 kHz....................................................0±0.5 dB
20 Hz to 15 kHz....................................................0±1.5 dB
[Europe model]
20 Hz to 15 kHz....................................................0±0.5 dB
AM SECTION
Tuning Range..................................................531 to 1,611 kHz
Usable Sensitivity........................................................100 µV/m
Selectivity ..........................................................................32 dB
Signal-to-Noise Ratio.........................................................50 dB
Image Response Ratio......................................................40 dB
Spurious Response Ratio..................................................50 dB
Harmonic Distortion; 400 Hz...............................................0.3%
AUDIO SECTION
Output Level/Impedance
FM (100 % mod. 1 kHz)
[U.K. model]............................................700 mV/1 k-ohms
FM (40 kHz Dev.)
[Europe model] .......................................600 mV/1 k-ohms
AM (30% mod. 400 Hz).............................180 mV/1 k-ohms
GENERAL
Power Supply
[U.K. model].......................................................240V, 50 Hz
[Europe model]..................................................230V, 50 Hz
Power Consumption............................................................11W
Dimensions (W x H x D)...............................435 x 86 x 291 mm
(17-1/8” x 3-3/8” x 11-7/16”)
Weight........................................................3.5 kg (7 lbs. 11 oz.)
Accessories.............................................Audio connection cord
AM loop antenna/Indoor FM antenna
* Specifications subject to change without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Yamaha TX-680RDS Le manuel du propriétaire

Catégorie
Destinataire
Taper
Le manuel du propriétaire