Philips SPK7407 Manuel utilisateur

Marque: Philips

Modèle: SPK7407

Catégorie: Souris

Taper: Manuel utilisateur

4000 Series

SPK7407

Mouse

User manual

Made in China

www.philips.com/welcome

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke

Philips N.V. and are used under license.

This product has been manufactured by and is sold under the responsibility of

Top Victory Investments Limited , and Top Victory Investments Limited is the

warrantor in relation to this product.

Speciﬁcations are subject to change without notice

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited

is under license. Other trademarks and trade names are those of their respective

owners.

1. Wireless mouse

2. Wireless receiver

3. User manual/warranty card

4. 1*AA battery (inside mouse)

Packaging contents

Trouble shooting

1. 1 x USB port

2. Bluetooth 3.0/Bluetooth 5.0

3. Windows® 7,Win d o ws® 8,Windows® 10 or later,

Android 3.2 and above; Mac OS 10.5 or later

System requirement

Attention

1. Connectivity：2.4GHz/Bluetooth 3.0/Bluetooth 5.0

2. Working distance: 2.4GHz about 15m/Bluetooth about 10m

3. Number of buttons：4

4. Button lifespan: 3 million clicks

5. Resolution：1600 DPI

6. Power supply: 1*AA Philips battery

7. Interface: USB wireless receiver

8. Mouse size：110.2x65.6x34.8mm

9. Product weight：83g ± 5g

10. Operating temperature range: 0 ° C to 40 ° C

11. Operating humidity range: 10% - 85%.

Technical specications

1. Make sure that the USB wireless receiver of the product is correctly plugged

into the USB port of the computer.

2. Make sure the computer meets the minimum system requirement.

3. If the distance between the product and the receiver exceeds an eﬀective

range, please reduce the distance for better performance.

If you can't solve the problem, please try to ﬁnd the solution from Philips

website or nearest retailer. Please do not disassemble the product by force.

1. Photoelectric technology can correctly detect the movement of mouse on

most surfaces. Do not use the mouse on any reﬂective, transparent or uneven

surfaces.

2. Please use dry and soft cloth to clean the product.

3. Do not disassemble the product by force.

4. Do not direct the light from the bottom of the mouse to your eyes.

5. Do not get in the rain or in the sun or ﬁre.

6. Do not ﬂush directly with water.

Commodity

Information

Name

Place of origin

Model No.

Serial No.

User info.

Name

Address

Tel.

Postcode

Sales info.

Retailer

Address

Tel.

Postcode

Sale date

Invoice No.

Stamp &

Signature

Maintenance

info.

Maintenance

company name

Address

Tel.

Postcode

Document No.

Date

Signature

Disposal of product and packing material

Important safety and compliance information

Waste Electrical and Electronic Equipment-WEEE

This symbol on the product or on its packaging indicates that this product must not be disposed of

with your household waste. Instead, it is your responsibility to dispose of your waste equipment by

handing it over to a designated collection point for the recycling or waste electrical and electronic

equipment. The separate collection and recycling of your waste equipment at the time of disposal

will help to conserve natural resource and ensure that it is recycled in a manner that protects human

health and the environment. For more information about where you can drop oﬀ your waste

equipment for recycling, please contact the local city oﬃce, the household waste disposal service or

the shop where you purchased the product.

CE Declaration of Conformity

This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the

Member States relating to Electromagnetic Compatibility Directive (2014/30/EU), RoHS directive (2011/65/EU) and

Radio Equipment Directive (2014/53/EU)( for Radio Equipment )

This product has been tested and found to comply with the harmonized standards for Information Technology

Equipment, these harmonized standards published under Directives of Oﬃcial Journal of the European Union.

Federal Communications Commission (FCC) Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE - CAUSING

EQUIPMENT REGULATIONS.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Commission Federale de la Communication

Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de

l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les

interferences nuisibles dans le cadre d'une installation résidentielle.

CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon

les consignes données, peuvent causer des interferences nuisibles aux communications radio. Cependant, rien ne

peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause

d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant

l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les

mesures suivantes:

• Réorienter ou déplacer l’antenne de réception.

• Augmenter la distance entre l’équipement et le récepteur.

• Brancher l’équipement sur un autre circuit que celui utilisé par le récepteur.

• Demander l’aide du marchand ou d’un technicien chevronné en radio/ télévision.

Toutes modiﬁcations n'ayant pas reçu l'approbation des services compétents en matière de conformité est

susceptible d'interdire à l'utilisateur l'usage du present équipement.

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE

MATERIEL BROUILLEUR DU CANADA.

1. Scroll wheel

2. Left and right buttons

3. Wireless receiver

4. Bluetooth mode 2 indicator

5. Bluetooth mode 1 indicator

6. 2.4G wireless mode indicator

7. Mode switch button

8. Optical sensor

9. ON/OFF switch

10. Battery door

Note: the factory default setting of the connection mode of mouse is 2.4G mode. If the

connection is successful, the 2.4G mode indicator will automatically turn oﬀ.

1. Short press the mode switch button to select the Bluetooth mode to be

connected, and the corresponding indicator light on the top will ﬂash slowly; long

press the Bluetooth mode switch key, and the corresponding indicator light on

the top will ﬂash quickly, then enter the waiting for Bluetooth pairing.

2. Turn on the Bluetooth of your computer or other devices, search and select

"Philips SPK7407" or "SPK7407" and start Bluetooth pairing until the connection

is completed.

Note:

1. Bluetooth 5.0 is not supported on Windows 7 and below;

2. The device ID for Bluetooth 3.0 is Philips SPK7407, while for Bluetooth 5.0 is

SPK7407.

4 5 6

Note: make sure that the mouse power is on before Bluetooth pairing.

Function overview of the mouse

2. Pull oﬀ the battery insulating ﬁlm.

Turn on the power switch.

1. Push the battery door away.

3. Take out the receiver and

close the battery door.

4. Plug the receiver into the

USB port of a PC.

2.4G wireless connection guide Mouse Bluetooth connection guide

1. The mouse has three channels, 2.4G, Bluetooth 1 and Bluetooth 2, which can

connect three devices at the same time.

2. Mode switching. Short press the mode switch button, the corresponding mode

indicator on the top will be on for 3 seconds, and then it will be oﬀ. The switch to

the corresponding equipment is completed. If the mode indicator is ﬂashing

slowly, it means that the mode has not been connected.

Mode switching method of the mouse

Dear customer,

Thank you for purchasing a Philips IT accessory product. To ensure you a reliable

after-sales service, please read the following instructions carefully. This product

warranty period is valid for one year from the date of purchase (the date of receipt

of the return receipt and the invoice date of the buyer).

www.philips.com/welcome

The following situations are not covered by after-sales service :

1. Unable to provide a valid warranty card and invoice (not including those that can

prove the products is within the valid warranty period) or the alteration of the

warranty without authorization.

2. The product model and serial number on the warranty card are not in conformity

with the physical product or without the distributor seal.

3. The model number, serial number or production date code on the product has

been altered, removed or made illegible.

4. The defect is the result of excessive use outside the intended purpose, e.g.

non-stop use in a commercial environment.

5. Damage due to not used in accordance with product instructions.

6. Damage caused by the use of pirated software or computer virus during use.

7. Damage caused by accident, damage, or repair from unauthorized service

vendors.

8. Damage caused by force majeure.

9. The product does not work properly due to missing connection caused by

accident, signal interference or other influential factors during use.

10.For normal wear and tear defects, or by their nature consumable parts.

11. The product does not function properly because it was not originally designed,

manufactured or approved for use in the country where you use the product, which

might occur when you imported the product.

If the functions of the product which you had purchased are defected or can not be

used normally, please contact your local retailer or contact:

Email: [email protected]

Hotline service: 1800 425 6396

Opening hours: 10 a.m. to 9 p.m. from Monday to Saturday & 10 a.m. to 6 p.m. on

Sunday.

The serial number of the product filled in the form must be consistent with the

actual product. This certificate the primary instrument for the after-sales service,

please safe keep it. If you need technical support, please show this warranty card,

and we will provide quality and professional services.

Philips SPK7407 Manuel utilisateur

Marque: Philips

Modèle: SPK7407

Catégorie: Souris

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Philips SPK7407 User manual

Philips SPK7407 Manuel utilisateur

Philips SPK7407 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents