KitchenAid Architect Series II KUDK03CTSS Manuel utilisateur

Marque: KitchenAid

Modèle: Architect Series II KUDK03CTSS

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Thank you for Choosing KitchenAid®Appliances.

We hold our company to the highest quality standards and it is important to us that you have a positive experience owning a

KitchenAid®product.

For your convenience, we have provided an easy to follow User Instruction Book. These instructions include a 'Troubleshooting"

section to help you through any problems you may encounter.

For additional information, you can visit the Frequently Asked Questions (FAQs)section of our website at www.kitchenaid.com. If

you need further assistance using your KitchenAid dishwasher, please contact us at 1-800-422-1230. In Canada: visit

www.kitchenaid.ca or call 1-800-807-6777.

Have your complete model and serial number ready. You can find your model and serial number on the label located near the door

on the right-hand or left-hand side of the dishwasher interior.

Para obtener acceso a "lnstrucciones para el usuario de lalavavajillas" en espaSol, o para informaci6n adicional de su producto

visite : www.kitchenaid.com

Tenga listo su nOmerode modelo completo. Puede encontrar su nOmerode modelo y de serie en la etiqueta ubicada cerca de la

puerta al lado derecho o izquierdo del interior de la lavavajillas.

Table of Contents

DISHWASHERSAFETY.............................................................1

QUICK STEPS.............................................................................3

DISHWASHERUSE....................................................................3

CYCLEAND OPTION DESCRIPTIONS....................................5

DISHWASHERFEATURES........................................................7

DISHWASHERCARE.................................................................9

TROUBLESHOOTING..............................................................10

WARRANTY..............................................................................12

Your safety and the safety of others are very important.

We have provided many important safety messages inthis Quick Reference Guideand on your appliance. Always read and obey

all safety messages.

This isthe safety alert symbol.

This symbol alerts you to potential hazards that can kill orhurt you and others.

All safety messages will follow the safety alert symbol andeither the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

W10084091A

iMPORTANT SAFETY iNSTRUCTiONS

WARN ING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher. [] Do not tamper with controls.

[] Use the dishwasher only for its intended function. []

[] Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children. []

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage []

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately after []

use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place,

Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

SAVE THESE iNSTRUCTiONS

GROUNDING iNSTRUCTiONS

[] For a grounded, cord-connected dishwasher:

The dishwasher must be grounded, In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding []

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the

dishwasher; if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the dishwasher.

SAVE THESE iNSTRUCTiONS

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

I Prepare and load Select a cycle

dishwasher, and option.

Y_ Add detergent ¢_ Start

for cleaning and _ J dishwasher.

rinse aid for

drying.

STEP 1

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before

washing.

Upper rack Lower rack

When loading silverware, always place sharp

items pointing down and avoid "nesting" as

shown.

STEP2

Make sure nothing keeps spray arm(s) from

spinning freely. It is important for the water

spray to reach all soiled surfaces.

• Make sure that when the dishwasher door is closed no items

are blocking the detergent dispenser.

• Items should be loaded with soiled surfaces facing down and

inward to the spray as shown. This will improve cleaning and

drying results.

• Avoid overlapping items like bowls or plates that may trap food.

• Place plastics, small plates and glasses in the upper rack.

Wash only plastic items marked "dishwasher safe."

• To avoid thumping/clattering noises during operation: Load

dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.

Add Detergent

NOTE: Ifyou do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid

or tablet detergent just before starting a cycle.

• Fresh automatic

dishwasher detergent A

results in better

cleaning. Store tightly

closed detergent B

container in a cool,

dry place.

A. Cover latch

B. Main Wash section

C. Pre-Wash section

The amount of detergent to use depends on:

How much soil remains on the items - Heavily soiled loads

require more detergent.

The hardness of the water - If you use too little in hard water,

dishes won't be clean. If you use too much in soft water,

glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)

[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)

[well water and some city water]

Dependingonyourwaterhardness,filltheMainWashsection

ofthedispenserasshown.FillthePre-Washsectiontothe

levelshown,ifneeded.

NOTE:Fillamountsshown

areforstandardpowdered

detergent.Follow

instructionsonthepackage

whenusingother

dishwasherdetergent.

MainWash Pre-Wash

Add Rinse Aid

• Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher

interior will have excessive moisture. The heat dry option will

not perform as well without rinse aid.

• Rinse aid keeps water from forming droplets that can

dry as spots or streaks. They also improve drying by

allowing water to drain off of the dishes after the final

rinse.

• Rinse aid helps to reduce excess moisture on the

dish racks and interior of your dishwasher.

• Check the rinse aid indicator. Add rinse aid when indicator

drops to "Add" level.

To add rinse aid, turn the dispenser cap

to "Refill" and lift off. Pour rinse aid into

the opening until the indicator level is at

"Full." Replace the dispenser cap and

turn to "Lock." Make sure cap is fully

locked.

NOTE: For most water conditions, the

factory setting of 2 will give good

results. If you have hard water or notice

rings or spots, try a higher setting. Turn

the arrow adjuster inside the dispenser

by either using your fingers or inserting a

flat-blade screwdriver into the center of

the arrow and turning.

Full

Add

Lock

Refillc::::___

¼turn tolock

STEP3

Select a Cycle (cycles vary by model)

See "Cycle and Option Description" charts in the following section.

Heavier cycles and options affect cycle length. Some cycles and

options will take up to 31/2hours to complete.

Select Options (options vary by model)

See "Cycle and Option Description" charts in the following section.

You can customize your cycles by pressing the options desired.

.......................................... OPTIONS ...................................................... ,

PoScub Sani _ Hi-Temp / Dy * 4Hour'

[ Rnse Stub _ Qo,k Deay

STEP4

Start or Resume a Cycle

• Run hot water at the sink nearest your dishwasher until

the water is hot. Turn off wate£

• Push door firmly closed. The door latches automatically. Select

the wash cycle and options desired OR press START/RESUME

to repeat the same cycle and options as in the previous wash

cycle.

• You can add an item anytime before the main wash starts.

Open the door slowly and add the item. Close the door firmly.

Press START/RESUME.

j_ _ _ _ "% ,, _ .., _'_ _ . . ,,_ ,, _._ _

{ :t<

/ ............ _..................._.............CYCLES ,_.................s . ............% ] OPTIONS

{O ]® ® ]{O {® [®........................./_®......................s_® /_®H_t O

_. _ . San H-Temp r_ { 4Hour

_ Heavy Norma Loht/ Quck Rnse e

Rinse Scrub dlbL k DelayI Duty Wash C_ina Cleanup Only rro_cruD _ry

.....................................................................................................................................................................__/

This information covers several different models. Your dishwasher may not have all the cycles and options described.

Washing

Drying

Clean

Sanitized

CYCLES DISH LOAD TYPES DESCRIPTIONS

WASH TIME (HH:MM)

Cycle Cycle + Options *Maximum

Minimum Minimum

....................] Use for hard.to-clean heavi!y During the wash thewash actionwill ii39 2:09 3:30

Heaw so ed pots, pans, casseroes, repeatedy pausefor severa seconds

Duty

...............................and regular tableware.

Use for loads with normal The energy-usage label is based on this 1:11 1:41 3:30

amounts of food soil. cycle. During the wash, the wash action

will repeatedly pause for several seconds.

Use for lightly soiled items or During the wash, the Wash action Will 1:i7 1:47 2:51

china and Crystal. repeatedly pause for several seconds.

Use to quickly wash

prerinsed glasses or dish

loads.

This cycle does not dry.

0:30 none none

Use:(r! ,g dishes, This Cycle does n0t dry. 0:!0 none none

Rinse glasses, and silverware that D0 not use detement

Only J will not be washed right away. _ :

You can customize your cycle by selecting an option.

See option selections, if you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins.

*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:

Pans, casseroles, etc. wit h Activates the PROSCRUB® spray jets and provides Heavy Duty or Normal

ProScrub tough food so I, ntens fed water spray to the back of the ower eve rack cyc e

/ May add heat and time to the Cycle.

\ ...............................f

Tosanitize your dishes and

glassware in accordance

with NSF/ANSI Standard

184 for Residential

Dishwashers.

Raises the water temperature in the final rinse to

approximately 155°F (68°C). This high temperature rinse

sanitizes your dishes and glassware in accordance with

NSF/ANSI Standard 184 for Residential Dishwashers.

Certified residential dishwashers are not intended for

licensed food establishments.

The Sanitize or Sani Rinse option adds heat and time to the

cycle.

Normal cycle. Heavy

Duty cycle automatically

uses Sani Rinse. Only

these sanitization cycles

have been designed to

meet the NSF/ANSl

requirements.

1,0._.-----_._ Loads Containing t0ugh, increases the target water temperature during the was h Heavy DutY or N0imal

Hi-Temp baked-on food port ons of the cyc e cyc es

l. Scub

Adds heat, wash time and water to the cycle.

For best drying results, dry Turn OFF when loads contain plastic dinnerware that may be All cycles, except Rinse

dishes with heat. sensitive to high temperatures. Only. Automatic with all

This option with the use of rinse aid will provide the best wash cycles unless you

drying performance, turn it off.

....................._ To run your dish washer at Delays the start of a CYcleup to 4 hours: All cycles, except Rinse

4Hour a ater t me or dur ng off On y

Delay ,, Select a wash CYcle and option& Press 4 H0ur De!ay. Press

_, peak nours

:..................... : START!RESUME. Close the door firmly.

Control Lock To avoid unintended use of

your dishwasher, or cycle

and option changes during

a cycle.

To turn on Lock, press and hold Heat Dry for at least Anytime

4 seconds.

To turn off Lock, press and hold Heat Dry for at least

4 seconds.

When Control Lock is lit, all buttons are disabled. Ifyou press

any pad while your dishwasher is locked, the light flashes

3 times. The dishwasher door can be opened while the

controls are locked.

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the

cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle

will automatically compensate by adding time, heat and water as needed.

To cancel wash

cycle

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher

drain completely.

O Washing TOfollow the clean indicator glows when a cycle is finished.

Drying progress of your

" . fyouseecttheSan R nse opt onl when the San Rnsecycle sfnshed, thesantzed ndcator

Clean d snwasner cyc e

-s_otzed glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the

cyc_e. This can happen if the cyc_e is interrupted_ _rthe water c_u_d n_t be heated t_ the required

Your KitchenAid dishwasher may have some or all of these features.

PROSCRUB ®Wash Area

The PROSCRUB ° wash area is located at

the back of the lower level rack.

NOTE: You must select the PROSCRUB °

wash option to use this feature. Make sure

items do not interfere with the water feed

tube, spray arms, or PROSCRUB _spray

jets.

• Load pans, casserole dishes, etc. in

the back of the lower dish rack with

the soiled surfaces facing the

PROSCRUB _ spray jets.

Only one row of items may face the PROSCRUB _ spray jets.

Stacking, overlapping or nesting items will keep the

PROSCRUB _ spray jets from contacting all of the surfaces.

Removable Lower Level Rack Inserts

IMPORTANT: This insert must be used when using the

PROSCRUB®wash option. All insert tines should be in the up

position, and the dish should be placed in the open, middle section

facing the PROSCRUB®spray jets.

The double and single removable rack inserts allow you to adjust

the rack for the type of load you are washing. This is useful when

washing a variety of dishes, pots and pans, or roasters.

A. Double rack insert

B. Single rack insert

CULINARY CADDY ® Utensil Basket

Use the utensil basket to hold specialty

cooking utensils (serving spoons,

spatulas, and similar items), or overflow

silverware items.

The basket hangs on the bottom rack in

the right-hand corner. Load the basket

while it is on the bottom rack or remove

the basket for loading on a counter or

table.

NOTE: Spin the spray arms. Be sure

items in the basket do not stop the

rotation of the spray arms.

SURE-HOLD ®Small Items Mesh Pouch

This pouch hangs on the front of

the bottom rack. Use it to hold

small items that could otherwise

"fly" around inside the dishwasher

during a cycle.

Adjustable 2-Position Mid Level Rack

After removing the culinary tool rack, you can raise or lower the mid

level rack to fit tall items in either the mid level or bottom rack.

Adjusters are located on each side of the mid level rack. Each

adjuster has 2 preset positions. The high and low positions are

marked on the adjuster.

IMPORTANT: if using the culinary tool baskets in the Down

position, the mid level rack must also be in the lowest position.

To raise the rack, press both rack adjusters and lift the rack until it

is in the Up position and level.

To lower the rack,

press both rack

adjusters and slide

the rack back to its

lower position.

NOTE: The mid level

rack must be level.

iii!!iiiiiiiiiii_

To install lower level inserts:

NOTE: It will be easier to install the inserts if you remove the

silverware basket from the rack.

1. Place the double insert end legs under the 3rd wire from the

right and single insert legs under the 2nd wire from the right.

IMPORTANT: Make sure that the curved wires, on the bottom

of the insert, fit over the wires in the bottom of the rack.

2. Push down on insert until handle fits against outer rack edge.

3. When center tab under handle locks in under the middle side

rack wire, the insert is in place.

To remove lower level inserts:

Pull handle out to the right and lift up to release and lift insert out of

rack.

SURE-HOLD ® Cup and Stemware Holder

Fold down the extra shelf on the left-hand or right-hand side of the

mid level rack to hold additional cups, stemware or long items such

as utensils and spatulas.

To install rack inserts:

Place the insert end legs under the front or back rack wire as

shown below. Push down on the center insert wire until it slides

into the holding clip on either side of the center in the bottom of the

rack.

NOTE: Remove the culinary tool basket(s) when washing tall

stemware or other tall items in the mid level rack.

FLEXI-FOLD DOWN TM Flexible Tines

The row of tines on the left-hand and

right-hand sides of the mid-level rack

can be adjusted to make room for a

variety of dishes.

To adjust the fold-down tines:

1. Grasp the tip of the tine that is in

the tine holder.

2. Gently push the tine out of the

holder.

3. Lay the tines down, toward the

center of the rack.

SURE-HOLD ® Light Item Clips

The light item clips hold lightweight plastic items

such as cups, lids, or bowls in place during

washing.

To move a clip:

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

Removable Mid Level Rack Inserts

Your dishwasher has two removable mid level rack inserts which

allow you to adjust the rack to the type of load you are washing.

A. Removable rack inserts

B. Insert holding clips

A. Lift removable insert wire to remove from holding clips

B. Holding clips

To remove inserts:

Lift up on the insert wire located toward the center of the rack to

release the insert from the holding clips. Lift insert out of rack.

Removable Mid Level and Culinary Tool Racks

The removable racks allow you to A

wash larger items such as stock

pots, roasters, and cookie sheets

in the lower level rack.

IMPORTANT: Remove dishes

prior to removing the mid level

rack from dishwasher.

To remove the rack:

1. To access track stops, pull A. Trackstop

the rack forward until it stops B.Track

and clicks into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. After opening both track stops, slide front wheels up and out

of the slot in track. Continue to pull rack forward in track and

slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

To replace the rack:

1. Gently pull rack tracks forward in dishwasher until they stop

and click into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. Place the back rack rollers on each side of the rack into the

track slot and roll the rack back into the tracks.

4. Insert front rack rollers on each side of the rack into the rack

slots.

5. Close track stops on both sides of rack and slide rack back

into dishwasher.

Culinary Tool Rack

The culinary tool rack is designed with 2 movable baskets to hold

extra silverware, knives and cooking utensils.

Install the baskets in this up position when you have extra

silverware and flatware to wash.

up position

Install the baskets in this down position when you have extra

silverware, knives, or utensils requiring more room to wash.

IMPORTANT: When you are using the culinary tool baskets in the

down position, the mid level rack must also be in the lowest

position.

Downposition

Remove the front basket in the down position, when you are using

the cup shelves or other tall items in the mid level rack for more

room.

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. If your dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended.

Clean the interior of the dishwasher, with a paste of powdered

dishwasher detergent and water or use liquid dishwasher detergent

on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a

complete washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash water.

If you have a drain air gap,

check and clean it if the

dishwasher isn't draining

well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months,

turn off the water and power supply to the dishwasher. In the

winter, if the dishwasher could be exposed to near freezing

temperatures or is left in a seasonal dwelling such as a second

home or vacation home, avoid water damage by having your

dishwasher winterized by authorized service personnel.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call,

In U.S.A. www.kitchenaid.com In Canada www.kitchenaid.ca

Dishwasher is not operating properly

• Dishwasher does not run or stops during a cycle

Is the door closed tightly and latched? •

Is the right cycle selected?

Is there power to the dishwasher? Has a household fuse blown,

or has a circuit breaker tripped? Replace the fuse or reset the

circuit breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor •

automatically resets itself within a few minutes. If it does not

restart, call for service.

Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several

seconds during the main wash. •

• Clean light is flashing

The dishwasher has malfunctioned. Call for service.

Dishwasher will not fill

Is the overfill protection float able to move

up and down freely? Press down to

release.

• Dishwasher seems to run too long

The dishwasher can run up to 31/2hours depending on soil

level, water temperature, cycles and options.

Is the water supplied to the dishwasher hot enough? The

dishwasher runs longer while heating water.

Is the dishwasher cycle time within the cycle times? See cycle

sections wash times. A delay automatically occurs in some

wash and rinse cycles until the water reaches the proper

temperature.

This dishwasher is equipped with an optical sensor wash that

detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.

IMPORTANT: The very first wash cycle after installation in your

home will be adjusted to include an additional 2 rinses. This

cycle must not be interrupted for proper sensor adjustment. If

this adjustment cycle is canceled or stopped before the Clean

light comes on at the end of the cycle, the next wash cycle will

repeat this sensor adjustment.

• Water remains in the dishwasher

Is the cycle complete?

Detergent remains in the covered section of the dispenser

Is the cycle complete?

Is the detergent lump-free? Replace detergent if necessary.

White residue on the front of the access panel

Was too much detergent used?

Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar

rinse as described in "Dishwasher Care."

Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from

the vent in the dishwasher console can form on the counter.

Refer to the Installation Instructions for more information.

Dishes do not dry completely

• Dishes do not dry completely

Did you use a rinse aid? Your dishwasher is designed to use

rinse aid for good drying performance. Without rinse aid your

dishes and dishwasher interior will have excessive moisture.

The heat dry option will not perform as well without rinse aid.

• Dishes are not dry

Did you load your dishwasher to allow proper water drainage?

Do not overload. Use a liquid rinse aid to speed drying.

Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty?

Did you use an air-dry or energy-saving dry option? Use a

heated drying option for dryer dishes.

• Excess moisture on racks and dishwasher interior

Check the rinse aid indicator to see that there is rinse aid in the

dispenser.

Spots and stains on dishes

• Spotting and filming on dishes

Is your water hard or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse aid

helps eliminate spotting and filming. Keep the rinse aid

dispenser filled. Always use a high-temp option. If your water

hardness is 13 grains or above, it is strongly recommended that

you install a home water softener. If you do not wish to drink

softened water, have the softener installed onto your hot water

supply.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of effective detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. Ifyou have questions about

your water pressure, call a licensed, qualified plumber.

NOTE: To remove spots and film from glassware, remove all

silverware and metal items and run a vinegar rinse as described

in "Dishwasher Care."

• Silica film or etching (silica film is a milky, rainbow-colored

deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the dishwasher, and

the heat of drying. It might not be possible to avoid the

problem, except by hand washing.

To slow this process use a minimum amount of detergent but

not less than 1 tbs (15 g) per load. Use a liquid rinse aid and

underload the dishwasher to allow thorough rinsing. Silica film

and etching are permanent and cannot be removed. Do not use

heated drying.

• White spots on cookware with nonstick finish

Has the dishwasher detergent removed cookware seasoning?

Reseason cookware after washing in the dishwasher.

• Brown stains on dishes and dishwasher interior

Does your water have high iron content? Rewash dishes using

1-3 tsp (5-15 mL) of citric acid crystals added to the covered

section of the detergent dispenser. Do not use detergent.

Follow with a Normal wash cycle with detergent. Iftreatment is

needed more often than every other month, the installation of

an iron removal unit is recommended.

Black or gray marks on dishes

Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the dishwasher

and cause marking. Hand wash these items. Remove

aluminum markings by using a mild abrasive cleaner.

Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed in

the dishwasher? It may be necessary to use a stain removal

product to remove stains from your dishwasher. Stains will not

affect dishwasher performance.

Noises

Grinding, grating, crunching or buzzing sounds

A hard object has entered the wash module (on some models).

When the object is ground up, the sound should stop. If the

noise persists after a complete cycle, call for service.

Dishes are not completely clean

• Food soil left on the dishes

Is the dishwasher loaded correctly?

Did you choose the cycle that describes the most difficult soil in

your dishwasher? If you have some items with heavier soils,

use a heavier cycle.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is detergent caked in dispenser? Use fresh detergent only. Do

not allow detergent to sit for several hours in a wet dispenser.

Clean dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and

cans?

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. If you have questions about

your water pressure, call a licensed, qualified plumber.

Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended dishwasher detergents

only.

Dishes are damaged during a cycle

• Chipping of dishes

Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from

washing action. Minimize chipping by moving the rack in and

out slowly.

NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic

dishwashing. Wash by hand.

KITCHENAID ®DISHWASHER WARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, KitchenAid or KitchenAid Canada (hereafter "KitchenAid") will pay for factory specified parts and repair labor

to correct defects in materials or workmanship. Service must be provided by a KitchenAid designated service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERTAIN COMPONENT PARTS

In the second through the fifth year from the date of purchase, when your major appliance is installed, operated and maintained according

to instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts for the following components if

defective in materials or workmanship: nylon dish racks, wash and drain motor, electronic controls and heating element.

LIFETIME LIMITED WARRANTY ON STAINLESS STEEL TUB AND INNER DOOR

For the lifetime of the product from the date of purchase, when your major appliance is installed, operated and maintained according to

instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts and repair labor to correct defects in

materials or workmanship. Service must be provided by a KitchenAid designated service company.

ITEMS KITCHENAID WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of products not approved by KitchenAid.

5. Replacement parts or repair labor costs for units operated outside the United States or Canada.

6. Pickup and delivery. This major appliance is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service in remote locations.

9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

10. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was

purchased.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. KITCHENAID SHALL NOT BE LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES. SOME STATESAND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL

OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATETO STATE OR PROVINCE TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if

another warranty applies. 5/07

For additional product information or to view FAQs (Frequently Asked Questions), in U.S.A, visit: www.kitchenaid.com

In Canada visit: www.kitchenaid.ca

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact KitchenAid at the number below.

Have your complete model number ready. You can find your model number and serial number on the label located near the door on the

right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A, call 1-800-422-1230. In Canada, call 1-800-807-6777.

If you need further assistance, you can write to KitchenAid with any questions or concerns at the address below:

In U.S.A.:

KitchenAid Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada:

KitchenAid Canada

Customer Interaction Centre

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please keep this User Instructions and model number information for future reference.

W10084091A

SP PN W10084169A

7/07

Printed in U.S.A.

Nous vous remercions d'avoir choisi les appareils KitchenAid®.

Notre compagnie entretient lesnormes de qualit6 les plus 61ev6eset il est important que vous soyez satisfait de poss6der un produit

KitchenAid®.

Pour votre commodit6, vous trouverez un Manuel d'instructions d'utilisation facile _.suivre. Ces instructions incluent une section

"D6pannage" pour vous aider _.r6soudre les probl_mes que vous pouvez rencontrer.

Pour des informations suppl6mentaires, visitez la section Foire aux questions (FAQ)de notre site Web www.kitchenaid.com. Si

vous avez besoin de plus d'assistance au sujet de I'utilisation de votre lave-vaisselle KitchenAid, veuillez nous t616phonerau

1-800-422-1230. Au Canada, visitez notre site Web www.kitchenaid.ca ou t616phonez au 1-800-807-6777.

Pr6parez vos num@os de module et de s@ieau complet. Vous trouverez vos num@os de module et de s6rie sur 1'6tiquette situ6e

pros de la porte sur le c6t6 droit ou gauche, _.I'int6rieur du lave-vaisselle.

Table des mati res

S¢:CURIT¢: DU LAVE-VAISSELLE ............................................. 1

€:TAPES RAPIDES ...................................................................... 3

UTILISATION DU LAVE-VAISSELLE ........................................ 3

DESCRIPTION DES PROGRAMMES ET DES OPTIONS ........ 5

CARACTC:RISTIQUES DU LAVE-VAISSELLE .......................... 7

ENTRETIEN DU LAVE-VAISSELLE ........................................... 9

DC:PANNAGE ............................................................................ 10

GARANTIE ................................................................................. 12

Votre s6curit6 et celle des autres est tr6s importante.

Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tousles messages de securite et de vous y conformer.

Voici le symbole d'alerte de securit&

Ce symbole d'alerte de securite vous signale les dangers potentiels de deces et de blessures graves & vous

et & d'autres.

Tousles messages de securite suivront le symbole d'alerte de securite et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient :

Risque possible de deces ou de bleesure grave ei vous ne

euivez pas immediatement les instructions.

Risque possible de deces ou de blessure grave si vous

ne euivez pas lee instructions.

Tousles messages de securite vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

W10084091A

IMPORTANTES INSTRUCTIONS DE SleCURITI_

AVERTISSEMENT : Lors de I'utilisation du lave-vaieselle, suivre les precautions elementaires dont les suivantes :

[] Lire la totalite des instructions avant d'utiliser le [] Ne pas faire fonctionner le lave-vaisselle si tousles

lave-vaisselle.

[] N'utiliser le lave-vaisselle que pour laver la vaisselle.

[] Utiliser les detersifs ou agents de ringage recommandes

pour lave-vaisselle et les garder hors de la portee des

enfants.

[] Lorsque vous chargez le lave-vaisselle :

1) Placer les objets coupants de fa(_on qu'ils ne puissent

endommager le joint de la porte; et

2) Placer les couteaux le manche vers le haut de fagon & ne

pas vous couper.

[] Ne pas laver d'articles en plastique a moins qu'ils ne soient

marques "Peut aller au lave-vaisselle" ou I'equivalent. Si

I'article ne porte aucune indication, v@ifier aupr_s du

fabricant.

[] Ne pas toucher I'element chauffant pendant le

fonctionnement ou immediatement apres.

panneaux de I'enceinte ne sont pas en place.

[] Ne pas jouer avec les commandes.

[] Ne pas abuser, vous asseoir ni monter sur la porte,

le couvercle ou les paniers du lave-vaisselle.

[] Pour eviter tout risque d'accident, ne pas laisser les

enfants jouer dans ou sur le lave-vaisselle.

[] Sous certaines conditions, de I'hydrogene peut se former

dans un reseau d'eau chaude inutilise depuis deux

semaines ou plus. L'HYDROGI_NE EST UN GAZ

EXPLOSIBLE. Si le systeme d'eau chaude n'a pas ete

utilise depuis un certain temps, laisser couler I'eau chaude

des robinets pendant quelques minutes avant de faire

fonctionner le lave-vaisselle. Cette mesure permettra

I'hydrogene de s'evaporer. Ce gaz etant inflammable, ne

pas fumer ni utiliser de flamme hue pendant cette periode.

[] Enlever la porte ou le couvercle du compartiment de lavage

Iorsque vous remplacez ou mettez au rebut un vieux

lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

INSTRUCTIONS DE NliSE LA TERRE

[] Pour un lave-vaisselie reli_ a la terre, branch_ avec un

COrdOn :

Le lave-vaisselle dolt 6tre relie &la terre. En cas d'un

mauvais fonctionnement ou d'une panne, la mise a terre

reduira le risque d'un choc electrique en fournissant le

moins de resistance pour le courant electrique. Le lave-

vaisselle est equipe d'un cordon avec un conducteur pour

relier les appareils & la terre. La fiche dolt 6tre branchee

sur une prise appropriee, installee et reliee & la terre

conformement aux codes et reglements Iocaux.

AVERTISSEMENT : La connexion incorrecte du

conducteur pour relier les appareils a la terre peut causer

le risque de choc electrique. Verifier avec un electricien

competent ou un representant de service si vous avez

des doutes si le lave-vaisselle est correctement relie& la

terre. Ne pas modifier la fiche fournie avec le lave-

vaisselle; si elle n'entre pas dans la prise, faire installer

une prise appropriee par un electricien competent.

Pour un lave-vaisselle branch_ en permanence :

Le lave-vaisselle doit _tre branche &un systems

d'installation electrique permanent en metal relie & la

terre, ou un conducteur pour relier les appareils doit _tre

relie avec les conducteurs du circuit et branche & une

borne pour relier les appareils & la terre ou au cordon

d'alimentation electrique avec le lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

Risque de basculement

Ne pas utiliser le lave-vaisselle jusqu'a ce qu'il soit completement install&

Ne pas appuyer sur la porte ouverte,

Le non-respect de ces instructions peut causer des blessures graves ou des coupures.

I Preparer et S_lectionner

charger le lave- un

vaisselle, programme et

une option.

F! Ajouter le _ -

d_tergent pourle _ "

nettoyage et de

I'agent de

rin_age pour le

s_chage .... ; .. - v_

_ Mettre le lave-

vaisselle en

marche.

ETAPE 1

Preparer et charger le lave-vaisselle

IMPORTANT : Enlever de la vaisselle les restes alimentaires, os,

cure-dents et autres articles durs. Enlever les etiquettes des

recipients avant de les mettre & laver.

Lors du chargement des couverts,

toujours charger les articles ac@es

pointes vers le bas et eviter d'"imbriquer"

les articles (voir I'illustration).

Panier sup_rieur Panier inf_rieur

S'assurer que rien n'emp_che le bras

d'aspersion de tourner librement. II est

important que le jet d'eau atteigne

toutes les surfaces sales.

Verifier que Iorsque la porte du lave-vaisselle est fermee, aucun

article ne bloque le distributeur de detergent.

Charger dans le panier les articles en orientant la surface sale

vers I'int@ieur, vers le bras d'aspersion - voir I'illustration. Ceci

optimisera I'efficacite de nettoyage et de sechage.

12viterle chevauchement d'articles retenant les aliments,

comme des bols ou assiettes.

Placer les articles de plastique, les petites assiettes et les

verres dans le panier superieur. Ne laver des articles de

plastique au lave-vaisselle que s'ils sont identifies comme

"lavable au lave-vaisselle'.

Pour eviter les bruits de choc et d'entrechoc durant le

fonctionnement, charger la vaisselle pour que les articles ne se

touchent pas les uns les autres. S'assurer que les articles

legers sont bien retenus dans les paniers.

ETAPE 2

Ajouter le d_tergent

REMARQUE :Si vous n'avez pas I'intention d'effectuer un

programme de lavage dans I'immediat, executer un programme de

rin(;age. Ne pas utiliser de detergent.

• Utiliser uniquement du detergent pour lave-vaisselle

automatique. Verser le detergent en poudre, liquide ou en

pastille, juste avant de demarrer un programme.

• Pour I'obtention de

meilleurs resultats, un

detergent a lave-

vaisselle automatique

frais est meilleur. B

....................................C

Conserver le recipient

du detergent bien

ferme dans un lieu

sec et frais.

A.Loquet du couvercle

B.Section de lavagepricipal

C.Section de pr_lavage

La quantite de detergent a utiliser depend :

Du degre de salete de la vaisselle - Les charges tres sales

necessitent plus de detergent.

De la durete de I'eau - Si on n'utilise trop peu de detergent

dans une eau dure, la vaisselle ne sera pas parfaitement lavee.

Si on utilise trop de detergent dans une eau douce, la solution

attaquera les articles en verre.

Eau douce a moyenne (0 a 6 grains par gallon US)

[eau venant d'adoucisseur d'eau general et eau du service

d'eau de la ville]

Eau moyenne a dure (7 a 12 grains par gallon US)

[eau de puits et, dans certains cas, du service d'eau de la

ville]

SelonladuretedeI'eau,remplirlasectiondelavageprincipal

dudistributeur,voirillustration.Remplirlasectiondeprelavage

jusqu'auniveauindique,sinecessaire.

REMARQUE:Lesquantites_'- HardWate_

indiquees correspondent & XS°ftWater

I'emploi d'un detergent en

poudre standard. Lors de ,

I'utilisation d'un autre Lavageprincipal

detergent, proceder

conformement aux instructions indiquees sur I'emballage.

Pr_lavage

Verser I'agent de ringage

• Votre lave-vaisselle est congu pour utiliser un agent de ringage

pour un sechage satisfaisant. Sans agent de ringage la

vaisselle et I'interieur du lave-vaisselle seront extr_mement

humides. L'option sechage avec chaleur ne pourra pas

s'effectuer aussi bien sans agent de ringage.

• Les agents de ringage emp_chent I'eau de former _ Full

des gouttelettes qui peuvent secher en laissant des

taches ou coulees. IIs ameliorent egalement le

sechage en permettant a I'eau de s'ecouler de la

vaisselle Iors du s_chage final.

Add

• Les agents de ringage aident a reduire I'exces

d'humidite sur les paniers a vaisselle eta I'interieur

du lave-vaisselle.

Verifier I'indicateur de I'agent de rin(_age. Verser I'agent de

rin(_age quand I'indicateur atteint le niveau marque "Add"

(ajouter).

Pour ajouter I'agent de ringage, tourner

le bouton du distributeur a "Refill"

(remplir) et soulever. Verser I'agent de

ringage dans I'ouverture jusqu'a ce que

I'indicateur soit sur "Full" (plein).

Remettre le bouton du distributeur et le

tourner a "Lock" (verrouille). S'assurer

que le bouton est bien verrouille.

REMARQUE : Pour une majorite de

types d'eau, le reglage effectue a I'usine

2 donnera de bons resultats. En cas

d'eau dure ou d'observation d'anneaux

ou dep6ts, essayer un reglage plus

eleve. Tourner I'ajusteur a fleche

I'interieur du distributeur soit a la main,

soit en inserant un tournevis a lame

plate au centre de la fleche et en

tournant.

Lock

Refill___-_

¼turn tolock

ETAPE3

S_lectionner un programme (les programmes varient

selon les modules)

Voir les tableaux "Description des programmes et des options"

darts la section qui suit.

Les programmes plus intenses et les options modifient la duree du

programme. Certains programmes et options prendront jusqu'a 3 h

30 pour se terminer.

S_lectionner les options (les options varient selon les

modules)

Voir les tableaux "Description des programmes et des options"

dans la section qui suit.

On peut personnaliser les programmes en appuyant sur les options

desirees.

I=TAPE 4

Commencer ou reprendre un programme

• Laisser I'eau couler du robinet le plus pres du lave-

vaisselle jusqu'a ce qu'elle soit chaude. Fermer le

robinet.

• Bien fermer la porte. Le verrou de la porte s'engage

automatiquement. Choisir le programme et les options de

lavage desires OU appuyer sur START/RESUME (mise en

marche/r_initialisation) pour reprendre les m_mes programme

et options que dans le programme precedent

• On peut ajouter un article a n'importe quel moment avant le

debut du lavage principal. Ouvrir doucement la porte et ajouter

I'article. Bien fermer la porte. Appuyer sur START/RESUME.

?esc!_i: i bo;£°_<_¢_:

CYCLES ...........................................................% // .................................................................OPTIONS ................................................................

__...............__e si_el............s_ .........s/_............._o...........s4e...................ro............s _e_ s_ ..............'

Heavy Norrna Lqht/ Quck Rnse _ _ . San H -Ternp n 4Hour

Duty Wash C_ina Cleanup / Only rro_cruD Rinse Scruo" L_ryk Delay

.......................,..................,_............../ .................._..............................................J/_Q,_,,,, _, /

O Washing

Drying

Clean

Sanitizec{

Ces informations couvrent plusieurs modeles differents. Votre lave-vaisselle peut ne pas comporter tousles programmes et options

decrits.

PRO- TYPES DE CHARGE DE DESCRIPTIONS

GRAMMES VAISSELLE

DURI_E DE LAVAGE (HH:MM)

Pro- Programme + *Dur_e

gramme options maximum

minimum minimum

• i Utlhser ce programme pour Lots du lavage I action de lavage fera 1:39 2:09 3:30

Heavy es cassero es et a va sse e des pauses r6p6t6es pendant que ques

0rdinaire difficiles 9_nettoyer secondes.

at tres sales.

Utiliser ce programme pour L'etiquette de consommation d'energie 1:11 1:41 3:30

des charges comportant des est basee sur ce programme. Lors du

quantites normales de debris lavage, I'action de lavage fera des pauses

alimentaires, repetees pendant quelques secondes.

/ .......................... ,, j • , , ,

® Utdlser ce programme pour Lors du lavage I action de lavage fera 1,17 ! .47 2.5!

Light/ les articles sales en des pauses r6p6t#es pendant quelques

_._Chlna_ porcelaine et en Cristal. secondes.

Utiliser ce programme pour

laver rapidement les verres ou

les charges de vaisselle

prerincees.

Ce programme ne seche pas.

0:30 aucune aucune

.......... Utiliser ce programme pour Ce Pr0gramme ne s_che pas 0:!0 aucune aucune

Rinse rincer la vaisselle, es verres Me "as u÷ili_er d_ d6teraent

Only , " ' _'_ _ _ _ _ _ "

et I argentene qu_ ne seront

" ............. pas lav6s imm6diatement.

On peut personnaliser le programme en selectionnant une option.

Voir la selection d'options. Si vous changez d'avis, appuyez sur cette option a nouveau pour la desactiver, ou selectionnez une option

differente. Vous pouvez changer une option a tout moment avant que I'option choisie ne commence.

*Les durees maximum de lavage dependent de la temperature de I'eau, de la salete, de la taille de la charge de vaisselle et des options

selectionnees.

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS .&.UTILISER AVEC :

VAISSELLE

....................casseroles, marmitesl etcl Active lesjets PROSCRUB ®et d_clenCh e une aspersion Programme HeavY Duty

ProScrub comportant des souillures intensifi6e & 1arri_re du partier inf6rieur. (service intense) ou

/,...................._ tenaces. Peut ajouterd e achaeuret accroftre adur6edu Norma.

programme.

Pour assainir la vaisselle et

la verrerie conformement

la norme 184 NSF pour les

lave-vaisselle residentiels.

Augmente la temperature de I'eau du ringage finql a environ

155°F (68°C). Ce ringage a haute temperature assainit la

vaisselle et la verrerie conformement a la norme 184 NSF

pour les lave-vaisselle residentiels. Les lave-vaisselle

residentiels certifies ne sent pas destines aux

etablissements alimentaires autorises.

L'option Sanitize ou Sani Rinse augmente la chaleur et la

duree du programme.

Programme Normal. Le

programme Heavy Duty

(service intense) utilise

automatiquement Sani

Rinse. Seuls ces

programmes

d'assainissement ont

ete congus pour

repondre aux exigences

de la norme NSF/ANSl.

_/ Charge avec aliments cuits Augmente la temp6rature cible de I eau iors des phases de Programme HeavY Duty

Hi-Temp adh_rant & la vaisselle, lavage du programme. (service intense) ou

_ Scrub Normal

Ajoute de la chaleur, du temps de lavage et de I eau au

programme.

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS A UTILISER AVEC :

VAISSELLE

Sechage avec chaleur

pour les meilleurs resultats

de sechage.

ARRI_TER le lave-vaisselle quand la charge contient de la

vaisselle en plastique qui peut _tre sensible a des

temperatures elevees.

Cette option avec I'utilisation d'un agent de rin(_age fournira

le meilleur rendement de sechage.

Tousles programmes,

sauf Rinse Only.

Automatique avec tous

les programmes de

lavage a moins de

I'eteindre.

J@......................'_ Pour mettre en marche le Diff6re !a mise en march e d'un programm eJusqu'__4 heures. Tousles programmes,

4H_ayr lave.vaissel!e plus tard ,ou Cho s run programme de avage et es opt ons Appuyer sur Sauf R!nse Only.

_,,._ / en aenor s aes neures ae Hour Delay. Appuyer sur START/RESUME: Bien fermer la

Verrouillage

des

commandes

Pour eviter I'utilisation

involontaire du lave-

vaisselle ou le changement

de programme ou d'option

durant un programme.

Pour verrouiller, appuyer sur Heat Dry pendant 4 secondes. A tout moment.

Pour deverrouiller, appuyer sur Heat Dry pendant

4 secondes.

Lorsque Control Lock est allume, tousles boutons sont

desactives. Lorsqu'on appuie sur une touche alors que les

commandes du lave-vaisselle sont verrouillees, I'indicateur

lumineux clignote 3 fois. On peut ouvrir la porte du lave-

vaisselle Iorsque les commandes sont verrouillees.

IMPORTANT : Le capteur incorpore au lave-vaisselle contr61e le degre de salete. La duree du programme et/ou la consommation d'eau

peuvent varier etant donne que le capteur rajuste le programme pour assurer des performances de lavage optimales. Si la temperature de

I'eau d'arrivee est inferieure a celle recommandee ou que la vaisselle est tres sale, le programme compensera automatiquement en

allongeant la duree du programme et en augmentant la quantite d'eau et le chauffage, au besoin.

COMMAN USAGE COMMENTAIRES

Pour Commencer si la porte est ouverte durant un programme Ouen Cas d'interruption de I'alimentation 61ectrique,

reprendre un ! indicateur StaWResume clignote. Le programme ne reprendera pas tant que !a porte ne sera

programme de pas ferm6e et qu 0n a pas appuy# sur Start!Resume;

lavage

Pour annuler un

programme de

lavage

Bien fermer la porte. Le lave-vaisselle commence une vidange de 2 minutes (au besoin). Laisser

le lave-vaisselle evacuer I'eau completement.

@W_sh_g Pour suivre la L indicateur Clean (propre) s allume Iorsqu un programme est termin6.

® Ury,ng progress on du , , ,

- " , i Sil option Sani Rinse (ringage sanitaire) est s61ectionn6el I indicateur Sanitized (assaini)s allume

c_t_a programme au !ave: Iorsque le programme Sani Rinse est termin6, Uindicateur Clignote A la fin du programme Iorsqu e

w valsselle , ,

le lave-vaisselle n a pas bien lav6 la vaisselle, comme par exemple lorsqu on a interrompu le

programme ou que l eau n a pas pu #tre chauff6e #,la temp6rature n6cessaire, Le t6moin s #teint

Votre lave-vaisselle KitchenAid peut comporter toutes les caract_ristiques ou seulement certaines d'entre elles.

Zone de lavage PROSCRUB _

La zone de lavage PROSCRUB _est situee

I'arriere du panier inferieur.

REMARQUE : Selectionner I'option de

lavage PROSCRUB ° pour utiliser cette

fonction. MVerifier que les articles

n'interferent pas avec le tube

d'alimentation d'eau, les bras d'aspersion

ou les jets d'aspersion PROSCRUB_L

• Charger les po_les et casseroles en les

orientant la surface sale vers les jets

PROSCRUB _ a I'arriere du panier inferieur.

Une seule rangee d'articles a la fois peut _tre orientee vers les

jets PROSCRUB °. Empiler, faire se chevaucher ou imbriquer les

articles emp_chera les jets PROSCRUB ° d'atteindre toutes les

surfaces.

Insertions amovibles du panier de niveau inf_rieur

IMPORTANT :Cette insertion dolt _tre utilisee en cas d'utilisation

de I'option de lavage PROSCRUB_L Toutes les tiges d'insertion

doivent _tre en position elevee et la vaisselle dolt _tre placee dans

la section ouverte du milieu, face aux jets d'aspersion

PROSCRUB °.

Les insertions amovibles (doubles et simples) du panier vous

permettent d'ajuster le panier pour le type de charge a laver. Ceci

est utile Iors du lavage de divers plats, casseroles et potions, ou

plats de r6tissage.

2. Appuyer sur I'insertion jusqu'a ce que la poignee s'enclenche

contre le bord externe du panier.

3. Lorsque I'onglet central sous la poignee s'enclenche sous la

broche du panier sur le c6te au milieu, I'insertion est en place.

Pour enlever les insertions du partier de niveau inf_rieur :

Tirer sur la poignee vers la droite et la soulever vers le haut pour la

degager et retirer I'insertion hors du panier.

Panier & ustensiles CULINARY CADDW _

Utiliser le panier a ustensiles pour

maintenir les ustensiles de cuisines

(grandes cuilleres, spatules, et articles

similaires), ou y charger les couverts.

Le panier a ustensiles est suspendu

dans le panier inferieur sur le c6te droit.

Charger le panier alors qu'il est sur le

panier a ustensiles ou le retirer pour le

charger sur un comptoir ou sur une

table.

REMARQUE : Faire tournoyer le bras

d'aspersion. S'assurer que les articles dans le panier n'entravent

pas la rotation du bras d'aspersion.

Filet SURE-HOLD e_pour petits articles

Ce filet est place a I'avant du

panier inf_rieur. Utiliser le filet pour

les petits articles qui, autrement,

risqueraient de "voler" a I'interieur

du lave-vaisselle durant un

programme.

A. Insertion double du panier

B. Insertion simple du panier

Pour installer les insertions du panier de niveau inf_rieur :

REMARQUE : IIsera plus facile d'installer les insertions si on retire

le panier a couverts du panier du lave-vaisselle.

1. Placer les pieds du bout de I'insertion double sous la troisieme

broche en partant de la droite les pieds de I'insertion simple

sous la deuxieme broche en partant de la droite.

IMPORTANT : S'assurer que les tiges arquees, en bas de

I'insertion, s'adaptent par-dessus les broches dans la partie

inferieure du panier.

Panier interm_diaire r_glable & 2 position

Retirer le partier pour ustensiles de cuisson, vous pouvez alors

lever ou baisser le panier intermediaire pour mettre de grands

articles dans le panier intermediaire ou inferieur. Les regleurs sont

situes de chaque c6te du panier intermediaire. Chaque reglage

comporte 2 positions prereglees. Les positions hautes et basses

sont indiquees sur le reglage.

IMPORTANT : Lors de I'utilisation des paniers pour ustensiles de

cuisson en position basse, le panier de niveau intermediaire dolt lui

aussi _tre place dans la position la plus basse.

Pour soulever le panier, appuyer sur les deux regleurs du panier et

soulever le panier jusqu'a ce qu'il soft en position haute et

d'aplomb.

Pour abaisser le

panier, appuyer sur

les deux regleurs du

panier et glisser le

panier a sa position la

plus basse.

REMARQUE : Le

panier intermediaire

dolt _tre d'aplomb.

Support de tasses et de verres & pied SURE-HOLD _

Rabattre la tablette d'appoint du c6te gauche ou droit du panier

intermediaire pour y placer des tasses, verres a pied ou articles

longs tels que les ustensiles et spatules.

Pour installer les insertions du panier :

Placer les pieds du bout de I'insertion sous la broche avant ou

arriere du panier - voir I'illustration ci-dessous. Pousser sur la

broche de I'insertion centrale jusqu'a ce qu'elle glisse sur I'attache

de maintien d'un c6te ou de I'autre du centre, a I'arriere du panier.

REMARQUE : Retirer le(s) panier(s) pour ustensiles de cuisson Iors

du lavage de grands verres a pied ou d'autres grands articles dans

le panier intermediaire.

Tiges flexibles FLEXI-FOLD DOWN TM

La rangee de tiges sur les c6tes

gauche eta droite du panier

intermediaire peut _tre reglee pour

faire de la place pour divers articles

de vaisselle.

Pour ajuster les tiges rabattables :

1. Saisir la pointe de la tige qui se

trouve dans le support de la tige.

2. Pousser doucement la tige

I'exterieur du support de la tige.

3. Rabattre les tiges vers le centre

du panier.

Attaches pour articles I_gers SURE-HOLD _

Les attaches maintiennent les articles legers en

plastique tels que les tasses, couvercles ou bols

en place pendant le lavage.

Pour deplacer une attache :

1. Tirer I'attache vers le haut pour la separer de

la tige.

2. Reinstaller I'attache sur une autre tige.

Insertions amovibles du partier de niveau interm_diaire

Le lave-vaisselle a deux insertions amovibles pour le panier

intermediaire, ce qui permet d'ajuster le panier pour le type de

charge a laver.

• B

A. Insertions amovibles du panier

B.Attaches de maintien de/'insertion

A. Soulever la broche de/'insertion amovible

pour retirer les attahes de maintien

B.Attaches de maintien

Pour enlever les insertions :

Soulever la broche de I'insertion situee vers le centre du panier

pour degager I'insertion des attaches de maintien. Soulever

I'insertion hors du panier.

Panier amovible interm_diaire et panier amovible pour

ustensiles de cuisson

Les paniers amovibles

permettent de laver des articles

de plus grande taille tels que

marmites, r6tissoires et t61es

biscuits dans le panier de niveau

inferieur.

IMPORTANT : Oter la vaisselle

avant de retirer le panier de

niveau intermediaire du lave-

vaisselle.

Pour enlever le panier :

A. Butte d'arr_t

B. Glissiere

Pour acceder aux butees d'arr_t, tirer le panier vers I'avant

jusqu'a I'arr6t et jusqu'a ce qu'il s'enclenche en place.

2. Pour ouvrir les butees d'arr_t, relever la butee d'arr_t vers

I'exterieur de la glissiere.

3. Apr_s ouverture des deux butees d'arr_t, faire glisser les roues

avant vers le haut pour les sortir de la fente dans la glissiere.

Continuer a tirer le panier vers I'avant et faire glisser les roues

arriere vers le haut pour les sortir de la glissiere.

4. Fermer les butees d'arr_t.

5. Faire glisser les butees de panier pour les reinstaller dans le

lave-vaisselle.

La page charge ...

KitchenAid Architect Series II KUDK03CTSS Manuel utilisateur

Marque: KitchenAid

Modèle: Architect Series II KUDK03CTSS

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid Architect Series II KUDK03CTSS User manual

KitchenAid Architect Series II KUDK03CTSS Manuel utilisateur

KitchenAid Architect Series II KUDK03CTSS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents