Maytag MEW7627AW Manuel utilisateur
- Catégorie
- Fours
- Taper
- Manuel utilisateur
Ce manuel convient également à
BUILT-IN ELECTRIC SINGLE AND DOUBLE OVENS
Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-800-688-9900
In Canada, call: 1-800-807-6777
or visit our website at
www.maytag.com or www.maytag.ca
FOUR ÉLECTRIQUE ENCASTRÉ À CONVECTION
Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service, composez le : 1-800-807-6777
ou visitez notre site internet à
www.maytag.ca
Table of Contents/Table des matières......................................................2
W10354192A
2
TABLE OF CONTENTS
OVEN SAFETY ................................................................................3
PARTS AND FEATURES................................................................4
ELECTRONIC OVEN CONTROLS.................................................5
Display..........................................................................................5
Cancel ..........................................................................................5
Oven Lights ..................................................................................5
Kitchen Timer ...............................................................................5
Settings ........................................................................................6
Oven Temperature Control ..........................................................7
Control Lockout............................................................................8
OVEN USE.......................................................................................8
Aluminum Foil...............................................................................8
Positioning Racks and Bakeware ................................................8
Bakeware......................................................................................9
Meat Thermometer.......................................................................9
Oven Vent(s) .................................................................................9
Baking...........................................................................................9
Broiling........................................................................................10
Keep Warm™ Option.................................................................11
Favorite.......................................................................................11
Cook & Hold ...............................................................................11
OVEN CARE..................................................................................12
Self-Cleaning Cycle....................................................................12
General Cleaning........................................................................13
Oven Light ..................................................................................13
Oven Door ..................................................................................13
TROUBLESHOOTING ..................................................................14
ASSISTANCE OR SERVICE.........................................................15
In the U.S.A. ...............................................................................15
In Canada ...................................................................................15
WARRANTY ..................................................................................15
TABLE DES MATIÈRES
SÉCURITÉ DU FOUR ...................................................................17
PIÈCES ET CARACTÉRISTIQUES ..............................................18
COMMANDES ÉLECTRONIQUES DU FOUR ............................19
Affichage.....................................................................................19
Annulation...................................................................................19
Lampes du four ..........................................................................19
Minuterie de cuisine ...................................................................19
Réglages.....................................................................................20
Commande de la température du four ......................................21
Verrouillage des commandes.....................................................22
UTILISATION DU FOUR...............................................................22
Papier d’aluminium.....................................................................22
Positionnement des grilles et des ustensiles
de cuisson au four......................................................................22
Ustensiles de cuisson au four....................................................23
Thermomètre à viande ...............................................................23
Évent(s) du four ..........................................................................24
Cuisson au four ..........................................................................24
Cuisson au gril............................................................................24
Option Keep Warm™.................................................................25
Favoris ........................................................................................26
Cuisson et maintien au chaud....................................................26
ENTRETIEN DU FOUR.................................................................27
Programme d'autonettoyage .....................................................27
Nettoyage général ......................................................................28
Lampe du four ............................................................................29
Porte du four...............................................................................29
DÉPANNAGE.................................................................................29
ASSISTANCE OU SERVICE.........................................................30
Au Canada..................................................................................30
GARANTIE.....................................................................................31
3
OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
■
Proper Installation – Be sure the oven is properly installed
and grounded by a qualified technician.
■
Never Use the Oven for Warming or Heating the Room.
■
Do Not Leave Children Alone – Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
■
Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the oven.
■
User Servicing – Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
■
Storage in Oven – Flammable materials should not be
stored in an oven.
■
Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
■
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
■
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
■
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
■
Keep Oven Vent Ducts Unobstructed.
■
Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
■
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings, oven doors, and windows of
oven doors.
For self-cleaning ovens:
■
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
■
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
■
Clean Only Parts Listed in Manual.
■
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
4
PARTS AND FEATURES
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the features shown here may not match those of your model.
A. Electronic oven control
B. Oven vent
C. Model and serial number plate
(on center vent under control panel)
D. Broil element
E. Gasket
F. Bottom vent
G. Lower oven (on double oven models)
H. Hidden bake element
I. Oven lights (left side not shown)
J. Oven door lock latch and oven light switch
Parts and Features not shown
Oven racks
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
A
B
C
D
E
F
G
H
I
J
5
ELECTRONIC OVEN CONTROLS
This manual covers different models. The oven you have purchased may have some or all of the items listed. The locations and
appearances of the items shown here may not match those of your model.
The oven’s controls are accessed through its control panel.
Single Oven Control Panel
Double Oven Control Panel
Display
When power is first supplied to the oven or if a power failure
occurs, “12:00” will appear on the display. See “Clock” in the
“Settings” section to set time of day.
When the oven is not in use, the display shows the time of day.
Cancel
The Cancel pads stop any function except the Timer and Control
Lock.
Oven Lights
While the oven doors are closed, press OVEN LIGHT to turn the
lights on and off. Both oven lights will come on when either door
is open. The oven lights will not come on during the Self-Clean
cycle.
Kitchen Timer
The Kitchen Timer can be set in hours or minutes up to 9 hours
and 59 minutes, and counts down the set time. The Kitchen
Timer does not start or stop the oven.
To Set:
1. Press KITCHEN TIMER.
“Set TIMER” will scroll down the text display area, and the
clock will display “--:--.”
2. Use the number keypad to enter the desired timer.
“Press TIMER” will scroll down the text display area.
A. Oven controls
B. Electronic display
C. Number keypad
D. Cook time
E. Delay start
F. Cook & hold
G. Self clean
H. Control lock (hold 3 sec.)
I. Settings
J. Kitchen timer
K. Oven light
L. Clock
M. Cancel
N. Start
A. Upper oven controls
B. Electronic display
C. Number keypad
D. Cook time
E. Delay start
F. Cook & hold
G. Self clean
H. Control lock (hold 3 sec.)
I. Settings
J. Kitchen timer
K. Oven light
L. Clock
M. Lower cancel
N. Start
O. Upper cancel
P. Lower oven controls
A
B
C
N
M
L
K
J I
H
D
E
F G
B
C D
E
F
G
J
I
H
L
K
M
N
O
A
P
6
3. Press KITCHEN TIMER to start the timer. The time begins
counting down. “TIMER Started” will scroll down the text
display area.
The last minute of the timer countdown will be displayed in
seconds.
At the end of the set time, one long beep will sound, and
“TIMER End” will be displayed.
4. Press KITCHEN TIMER to clear the display.
NOTE: A reminder beep will sound until the Timer is
canceled.
To Cancel:
Press KITCHEN TIMER.
Settings
Fahrenheit and Celsius
The temperature is factory preset to Fahrenheit, but can be
changed to Celsius.
1. Press SETTINGS once.
“TEMP UNIT” will appear in the text area. “FAHRENHEIT.
Press 1 for Celsius” will scroll in the text area.
2. Press the “1” number keypad to change the temperature unit
setting.
3. “CELSIUS Selected” will scroll in the text area. The
temperature units have been changed.
4. Press SETTINGS then follow the display prompts to return to
Fahrenheit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid pad press
■ Function has been entered
■ Oven is preheated
Three tones
■ Invalid pad press
Four tones
■ End of cycle
■ End of Kitchen Timer
Adjusting Sound On or Off
The oven sound is factory preset for On but can be changed to
Off.
1. Press SETTINGS twice. “SOUND” will appear in the text area,
and “ON. Press 1 for OFF” will scroll in the text area.
2. Press the “1” number keypad to turn the sound Off.
3. “OFF Selected” will scroll in the text area. The sound has now
been turned off.
4. Press SETTINGS twice then follow the display prompts to
return the sound setting to On.
Adjusting Sound Volume
The oven sound is factory preset for High but can be changed to
Low.
1. Press SETTINGS three times. “SOUND VOLUME” will appear
in the text area, and “HIGH. Press 1 for LOW” will scroll in the
text area.
2. Press the “1” number keypad to turn the sound Low.
3. “Low Selected” will scroll in the text area. The sound volume
has now been changed.
4. Press SETTINGS three times then follow the display prompts
to return the sound volume setting to High.
Adjusting End Tone On or Off
The end tone is factory preset for On but can be changed to Off.
1. Press SETTINGS four times. “END TONE” will appear in the
text area, and “ON. Press 1 for OFF” will scroll in the text
area.
2. Press the “1” number keypad to turn the end tone Off.
3. “OFF Selected” will scroll in the text area. The end tone has
now been turned off.
4. Press SETTINGS four times then follow the display prompts
to return the tone setting to On.
Adjusting Keypress Tone On or Off
The keypress tone is factory set for On but can be changed to
Off.
1. Press SETTINGS five times. “KEYPRESS TONE” will appear
in the text area, and “ON. Press 1 for OFF” will scroll in the
text area.
2. Press the “1” number keypad to turn the keypress tone Off.
3. “OFF Selected” will scroll in the text area. The keypress tone
has now been turned off.
4. Press SETTINGS five times then follow the display prompts to
return the keypress tone setting to On.
Adjusting Reminder Tone On or Off
The reminder tone is factory preset for On but can be changed to
Off.
1. Press SETTINGS six times. “REMINDER TONE” will appear in
the text area, and “ON. Press 1 for OFF” will scroll in the text
area.
2. Press the “1” number keypad to turn the reminder tone Off.
3. “OFF Selected” will scroll in the text area. The reminder tone
has now been turned off.
4. Press SETTINGS six times then follow the display prompts to
return the reminder tone setting to On.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is factory preset for the 12-hour format.
To Change the Clock to 24-Hour Format:
1. Press SETTINGS seven times. “12/24 HOUR” and “12HR.
Press 1 for 24HR” will appear in the display text area.
2. Press the “1” number keypad to change the 12/24 hour
setting to 24-hour.
3. “24HR Selected” will scroll in the text area. The 12/24 hour
setting has been changed.
4. Press SETTINGS seven times then follow the display prompts
to return the clock setting to 12-hour.
7
To Set the Clock:
Before setting, make sure the oven and Kitchen Timer are off.
1. Press CLOCK once. “Set Time” will appear in the text area.
2. Press the number keypad to enter the desired time.
3. “Press CLOCK or Press START” will appear in the text area.
4. Press CLOCK or START. “Time Set” will appear in the text
area. Once it disappears, the time is set.
Sabbath Mode
Sabbath Mode is used to configure the oven system so that
certain features and modes are disabled or defeatured. By
enabling Sabbath Mode, the oven will conform to Star-K Jewish
Sabbath requirements.
The oven is factory preset with Sabbath Mode Off.
To Enable Sabbath mode:
1. Press SETTINGS eight times. “SABBATH” and “OFF. Press 1
for ON” will appear in the display text area.
2. Press the “1” number keypad to change the Sabbath setting
to On.
3. “ON Selected” will scroll in the text area. The Sabbath setting
has been changed.
4. Press SETTINGS eight times then follow the display prompts
to return the Sabbath setting to Off.
12-Hour Auto Off
The oven control is factory preset to automatically shut off the
oven 12 hours after the oven turns on. This will not interfere with
any timed or delayed cook function.
To Cancel 12-Hour Auto Off:
1. Press SETTINGS nine times. “12Hr AUTO_OFF” and “ON.
Press 1 for OFF” will appear in the display text area.
2. Press the “1” number keypad to change the 12-Hour Auto Off
setting to Off.
3. “OFF Selected” will scroll in the text area. The 12-Hour Auto
Off setting has been changed.
4. Press SETTINGS nine times then follow the display prompts
to return the 12-Hour Auto Off setting to On.
Language
The Language is factory preset to English but can be changed to
French.
To Change the Language to French:
1. Press SETTINGS 10 times. “LANGUAGE” and “ENGLISH.
Appuyez sur 1 pour FRANÇAIS” will appear in the display text
area.
2. Press the “1” number keypad to change the language to
French.
3. “FRANÇAIS Sélectionné” will scroll in the text area. The
language has been changed.
4. Press SETTINGS 10 times then follow the display prompts to
return the Language setting to English.
Demonstration Mode
The demonstration mode is intended for sales floor
demonstrations. It should be Off for normal operation. While
demonstration mode is active, the oven will not heat.
To switch off Demonstration Mode:
1. Press SETTINGS eleven times. “Demo Mode” and “ON. Press
1 for OFF” will appear in the display text area.
2. Press the “1” number keypad to change the Demonstration
Mode setting to Off.
3. “OFF Selected” will scroll in the text area. The Demonstration
Mode setting has been changed.
4. Press SETTINGS 11 times then follow the display prompts to
return the Demonstration Mode setting to On.
Oven Temperature Control
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
On double oven models, there is a separate temperature
calibration for the upper and lower oven.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
To Adjust Oven Temperature Calibration:
For single ovens:
1. Press SETTINGS twelve times. “OVEN CALIBRATE. Press
START” will appear in the text area.
2. Press START to calibrate the oven. “Enter Offset: Press 1 to
increase, 2 to decrease” will appear in the text area.
3. Press the “1” number keypad to increase or the “2” number
keypad to decrease the temperature in 5°F (3°C) increments.
The adjustment can be set between 30°F (18°C) and -30°F
(-18°C).
4. Press START to save the adjustment and exit the
Temperature Calibration menu.
For double ovens:
1. Press SETTINGS 12 times. “TEMP CALIB” and “UPPER
CALIBRATE. Press START or Press 1 for Lower calibrate” will
appear in the text area.
2. Press the “1” number keypad to toggle between upper and
lower oven calibration.
3. Press START to calibrate the selected oven. “Enter Offset:
Press 1 to increase, 2 to decrease” will appear in the text
area.
4. Press the “1” number keypad to increase or the “2” number
keypad to decrease the temperature in 5°F (3°C) increments.
The adjustment can be set between 30°F (18°C) and -30°F
(-18°C).
5. Press START to save the adjustment and exit the
Temperature Calibration menu.
ADJUSTMENT °F
(ADJUSTMENT °C)
COOKS FOOD
10°F (6°C) ...a little more
20°F (12°C) ...moderately more
30°F (17°C) ...much more
-10°F (-6°C) ...a little less
-20°F (-12°C) ...moderately less
-30°F (-17°C) ...much less
8
Control Lockout
The control can be locked out to avoid unintended use of the
oven.
The control cannot be locked if the oven is in use or if the Kitchen
Timer is running.
The current time of day will remain in the display when the control
is locked.
To Lock Control:
1. Make sure the oven(s) is not in use and Kitchen Timer is not
running.
2. Press and hold CONTROL LOCK for 3 seconds or until
“CONTROL LOCKED” scrolls in the display.
“LOCKED” will remain lit in the display.
To Unlock Control:
1. Press and hold CONTROL LOCK for 3 seconds or until
“CONTROL UNLOCKED” scrolls in the display.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil, liner or
cookware.
■ For best cooking results, do not cover entire rack with foil
because air must be able to move freely.
■ To catch spills, place foil on rack below dish. Make sure foil is
at least ¹⁄₂" (1.3 cm) larger than the dish and that it is turned
up at the edges.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door or
bottom.
Racks
■ Position racks before turning on the oven.
■ Do not position racks with bakeware on them.
■ Make sure racks are level.
To Remove Oven Racks:
Pull rack out to the stop position, raise the front edge, and then
lift out.
To Replace Oven Racks:
Place rack on the rack support in the oven. Tilt the front edge up
slightly, and slide rack back until it clears the stop position. Lower
front and slide back into the oven.
Broiling
Rack Positions - Upper and Lower Oven
Traditional Cooking
Rack positions for 30" (76.2 cm) Non-Convection ovens
1-rack baking: 3
2-rack baking in single or upper oven: 2 and 5
Most 2-rack baking in lower oven: 2 and 5
Roasting small cuts of meat and poultry: 2
Roasting large cuts of meat and poultry: 1
Rack positions and pan placement of layer cakes for
30" (76.2 cm) and 27" (68.6 cm) Non-Convection ovens
For best results when baking layer cakes on 2 racks, use racks 2
and 5 in the single or upper oven. Place the cakes on the racks as
shown.
For best results when baking layer cakes on 2 racks in the lower
oven, use racks 3 and 5. Place the cakes on the racks as shown.
FOOD RACK POSITION
Most broiling 5
FOOD RACK POSITION
Large roasts, turkeys 1
Small cuts of meat and
poultry
2
Cookies, biscuits, muffins,
cakes, 1- rack baking
3
Most 2-rack baking 2 and 5
6
5
4
3
2
1
9
Rack positions and pan placement of layer cakes for
30" (76.2 cm) and 27" (68.6 cm) Non-Convection ovens
For best results when baking layer cakes on 2 racks in the lower
oven, use racks 3 and 5. Place the cakes on the racks as shown.
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow
2" (5.0 cm) of space around bakeware and oven walls.
Bakeware
The bakeware material affects cooking results. Follow
manufacturer’s recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
Meat Thermometer
On models without a temperature probe, use a meat
thermometer to determine whether meat, poultry and fish are
cooked to the desired degree of doneness. The internal
temperature, not appearance, should be used to determine
doneness. A meat thermometer is not supplied with this
appliance. Follow manufacturer's directions for using a meat
thermometer.
Oven Vent(s)
The oven vent(s) should not be blocked or covered since they
allow the inlet of fresh air into the cooling system. Also, the bottom
vent should not be blocked or covered since it allows the inlet of
fresh air into the cooling system and the outlet of hot air from the
cooling system. Blocking or covering vents will cause poor air
circulation, affecting cooking, cleaning and cooling results.
Baking
Before baking, position racks according to the “Positioning
Racks and Bakeware” section.
To Bake:
1. Press BAKE for the desired oven.
“BAKE” will scroll in the text area, and 350°F (177°C) will be
displayed.
“Set temp or Press START” will scroll in the text area.
2. Use the number keypad to enter the desired temperature.
The temperature can be set from 170°F (77°C) to 550°F
(288°C).
NOTE: The temperature may be changed at any time by
using the number keypad to enter the desired temperature
and then pressing START. Changing the temperature once
food is placed in the oven could affect the performance.
3. (Optional) If a Set Cooking Time is desired, press COOK
TIME. Use the number keypad to enter the desired cook time.
“Press START” will scroll in the text area.
NOTE: The Set Cooking Time can be changed at any time
during the cooking cycle by pressing COOK TIME. At the end
of the time set, the oven will turn off automatically, the end of
cycle tone will sound, and “Cooking Complete” will appear in
the text area.
BAKEWARE/
RESULTS
RECOMMENDATIONS
Light colored
aluminum
■ Light golden crusts
■ Even browning
■ Use temperature and time
recommended in recipe.
Dark aluminum and
other bakeware with
dark, dull and/or
nonstick finish
■ Brown, crisp
crusts
■ May need to reduce baking
temperatures slightly.
■ Use suggested baking time.
■ For pies, breads and casseroles,
use temperature recommended in
recipe.
■ Place rack in center of oven.
Insulated cookie
sheets or baking
pans
■ Little or no bottom
browning
■ Place in the bottom third of oven.
■ May need to increase baking time.
Stainless steel
■ Light, golden
crusts
■ Uneven browning
■ May need to increase baking time.
Stoneware/Baking
stone
■ Crisp crusts
■ Follow manufacturer’s instructions.
Ovenproof
glassware, ceramic
glass or ceramic
■ Brown, crisp
crusts
■ May need to reduce baking
temperatures slightly.
Single and Double Oven
A. Control panel
B. Oven vent
C. Single oven or upper double oven
G. Bottom vent
Double Oven
D. Upper oven
E. Oven vent
F. Lo wer ov en
G. Bottom vent
E
D
F
B
A
C
G
10
4. (Optional) If a Delay Start is desired, press DELAY START. Use
the number keypad to enter the desired time for delay. “Press
START” will scroll in the text area. You will be prompted to
enter a Set Cooking Time. The Set Cooking Time is
mandatory when using setting a Delay Start.
5. Press START. The oven will preheat, and a beep will sound
when the preheat is done.
6. Place the food in the oven and close the oven door when
preheat is complete.
7. Press CANCEL for the selected oven when finished.
8. Remove food from the oven.
Broiling
Broiling uses direct radiant heat to cook food. The lower the
temperature, the slower the cooking. Thicker cuts and unevenly
shaped pieces of meat, fish and poultry may cook better at lower
broiling temperatures.
■ For best results, use a broiler pan and grid (not provided). It is
designed to drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be
ordered. See “Assistance or Service” section to order.
■ For proper draining, do not cover the grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
■ Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to avoid curling.
■ Select HI/550°F (288°C) broil for most broiling. Select
LO/450°F (232°C) broil for low-temperature broiling of longer
cooking foods such as poultry to avoid over browning.
■ Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
■ After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
Before broiling, position rack according to the Broiling Chart.
Position food on grid in the broiler pan, then place it in the center
of the oven rack. Close the oven door and set the control.
To Broil:
1. Place the food in the oven, preheating is not necessary.
2. Close the oven door.
3. Press BROIL for the desired oven. “BROIL” and “Set temp or
Press START” will scroll in the text area, and “550ºF” (288ºC)
will be displayed.
4. Use the number keypad to enter the desired broil
temperature. The temperature can be set from 450°F (232°C)
to 550°F (288°C).
5. Press START for the selected oven.
“BROIL” will scroll in the selected oven text area.
NOTE: The temperature may be changed at any time by
using the number keypad to enter the desired temperature
and then pressing START. Changing the temperature once
food is placed in the oven could affect the performance.
6. Press CANCEL for the selected oven when finished.
7. Remove food from the oven.
BROILING CHART
For best results, follow the chart below. For diagram, see the
“Positioning Racks and Bakeware” section.
A temperature setting of 550°F (288°C) is recommended for most
foods. Fish fillets and bone-in chicken pieces are best using
450°F (232°C)
Times are guidelines only and may need to be adjusted for
individual foods and tastes. Preheat is not needed for broiling.
*Place up to 12 patties, equally spaced, on broiler grid.
For beef to have a well seared exterior and rare interior, use
rack 6. Expect a moderate degree of smoke when broiling.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
FOOD Rack
Position
COOK TIME
(in minutes)
Beef
Steak 1" to 1¹⁄₄"
(2.5 cm to 3 cm) thick
medium-rare
medium
well-done
5
5
5
10-17
12-19
15-24
Pork
Pork chops 1" (2.5 cm) thick
medium 5 16-24
Lamb
Lamb chop 1" (2.5 cm) thick
medium-rare
medium
5
5
10-12
11-13
Ground Meats
Ground beef, pork or lamb
patties*
³⁄₄" (2 cm) thick
well-done 5 15-18
Chicken
Chicken bone-in pieces
(2" to 2¹⁄₂" [5 cm to 6.3 cm])
boneless pieces (4 oz [113 g])
5
5
20-40
12-15
Fish
Fish ¹₂" to ³⁄₄" (1.25 to 2 cm)
thick 5 6-15
11
Keep Warm™ Option
IMPORTANT: Food must be at serving temperature before it is
placed in the oven. Food should not be held for more than 1 hour;
however, breads and casseroles may become too dry during the
Keep Warm function. For best results, cover food.
The Keep Warm™ option allows hot cooked food to stay at
serving temperature.
1. Press KEEP WARM for the desired oven.
“KEEP WARM” and “Set Temp or Press START” will scroll in
the text area, and 170°F (78°C) will be displayed.
2. Use the number keypad to enter the desired temperature.
The temperature can be set from 145°F (63°C) to
200°F (94°C).
NOTE: The temperature may be changed at any time by
using the number keypad to enter the desired temperature
and then pressing START.
3. Press START.
“KEEP WARM” will appear in the selected oven text area, and
the set temperature will be displayed.
4. “KEEP WARM” and the temperature will be displayed while
the Keep Warm™ option is active or CANCEL is pressed for
the selected oven.
5. Place food in the oven and close the door.
6. Press CANCEL for the selected oven when finished.
7. Remove food from the oven.
To Cancel Keep Warm™ option:
Press CANCEL for the oven that is in use. Remove food from
oven.
Favorite
The Favorite feature allows you to save the time and temperature
settings from any active cook function.
To Save a Cooking Function as a Favorite:
1. Press FAVORITE. “press 1 to RETRIEVE, 2 to SAVE last
cooking cycle” will appear in the upper text area.
2. Press “2” to save the last performed cooking function. A
confirmation message (“SAVED”) will appear.
To Recall and Start a Favorite:
1. Press FAVORITE. “press 1 to RETRIEVE, 2 to SAVE last
cooking cycle” will appear in the upper text area.
2. Press “1.” The last saved function will appear onscreen. If no
functions have been ever saved, “no favourite saved” will
appear, and an error sound will play.
3. The set temperature can be changed by using the number
keypad to enter the desired value, then pressing START. The
Cook Time (if available) can be changed by pressing COOK
TIME, then using the number keypad to enter desired time,
then pressing START. The temperature and time can be
changed after the function has started.
4. Place food in the oven when required.
5. Press CANCEL for the oven that is being used when finished.
6. Remove food from the oven.
Cook & Hold
Cook & Hold allows the oven to be set to cook for a set length of
time, followed by a 1-hour Keep Warm cycle.
Delay Cook & Hold allows the oven to be set to start cooking
after a length of time you set, cook for a set length of time,
followed by a 1-hour Keep Warm cycle.
Delay start should not be used for food such as breads and
cakes because they may not bake properly. Do not use delayed
baking if oven is already hot.
NOTE: During the Cook & Hold function, the Delay Start and
Cook Time are applied to the baking itself and not for the
“Holding Warm” phase.
1. Press BAKE for the desired oven.
“BAKE” will scroll in the text area, and 350°F (177°C) will be
displayed.
“Set temp or Press START” will scroll in the text area.
2. Use the number keypad to enter the desired temperature.
NOTE: The temperature may be changed at any time by
using the number keypad to enter the desired temperature
and then pressing START. Changing the temperature once
food is placed in the oven could affect the performance.
3. Press COOK & HOLD. Use the number keypad to enter the
desired cook time. “Press START” will scroll in the text area.
NOTE: The Set Cooking Time can be changed at any time
during the cooking cycle by pressing COOK TIME. Once the
cook time countdown is complete, “Cooking complete -
Holding warm” will scroll in the text area until the door is
opened, Cancel is pressed, or 1 hour has passed.
4. (Optional) If a Delay Start is desired, press DELAY START. Use
the number keypad to enter the desired time for delay. “Press
START” will scroll in the text area. You will be prompted to
enter a Set Cooking Time. The Set Cooking Time is
mandatory when using setting a Delay Start.
5. Press START. The oven will preheat, and a beep will sound
when the preheat is done.
6. Place the food in the oven and close the oven door when
preheat is complete.
7. At the end of the time set, the oven will keep warm
automatically, the end of cycle tone will sound and “Cooking
Complete - Holding Warm” will appear in the text area.
8. Press CANCEL to complete the cycle.
9. Remove food from the oven.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
12
OVEN CARE
Self-Cleaning Cycle
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well-ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see
“Oven Vent” or “Oven Vents” section.
Do not clean, rub, damage or move the oven door gasket. The
door gasket is essential for a good seal.
Prepare Oven:
■ Remove the broiler pan, grid, cookware and bakeware and,
on some models, the temperature probe from the oven.
■ Remove oven racks to keep them shiny and easy to slide.
See “General Cleaning” section for more information.
■ Remove any foil from the oven because it may burn or melt,
damaging the oven.
■ Hand clean inside door edge and the 1½" (3.8 cm) area
around the inside oven cavity frame, being certain not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc., enter slots on door frame. Use a damp cloth to clean this
area.
■ Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour clean cycle; however, the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp
cloth to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
On some models, the surface elements will not work during the
Self-Cleaning cycle.
When “LOCK” shows in the display, the door cannot be opened.
To avoid damage to the door, do not force the door open when
“LOCK” is displayed.
If an oven door is left open, “Door Open Clean Canceled” will
appear in the display and a signal will beep. Close the oven door
and press CLEAN MODES.
NOTE: Only one oven can use the Self-Clean cycle at a time, and
24 hours must pass before the next Self-Clean can begin.
To Self-Clean:
1. Close the oven door.
2. Press SELF CLEAN.
“REMOVE RACKS” will scroll in the selected oven text area.
3. For Double Ovens Only: “PRESS 1 FOR UPPER OVEN” will
appear in the upper oven text area. “PRESS 2 FOR LOWER
OVEN” will appear in the lower oven text area. Press the “1”
or “2” number keypads to select the desired oven.
4. “Select Level” and “Press 1. Level 1 (Quick) 2. Level 2, 3.
Level 3, 4. Level 4 (reg), 5. Level 5, 6. Level 6 (Maxi)” will scroll
on the display text area.
5. Use the number keypad to select the clean level.
6. Press START.
After the door is locked, “SELF CLEAN” will scroll in the
selected text area until the clean cycle is finished.
When the self-clean cycle ends:
“CLN COMPLETE will scroll in the selected oven text area.
“OVEN COOLING” will scroll in the display until the oven
temperature falls below 500°F (260°C).
“UNLOCKING” will be displayed until the oven door unlocks and
the lock icon turns off.
To Delay Start Self-Clean:
1. Press Delay Start.
2. For Double Ovens Only: “PRESS 1 FOR UPPER OVEN” will
appear in the upper text area, and “PRESS 2 FOR LOWER
OVEN” will appear in the lower text area. Press the “1” or “2”
number keypads to select the desired oven.
3. “--:--” will be displayed, and “Set time to delay. Then Press
START” will scroll from right to left in the selected oven text
area. Use the number keypad to enter the desired time to
delay.
4. Press START. “Select cooking/cleaning mode” will scroll in
the selected oven text area.
5. Press SELF CLEAN. “REMOVE RACKS” will scroll in the
selected oven text area for 5 seconds, followed by “SELECT
OPTION.”
6. “Select Level” and “Press 1. Level 1 (Quick) 2. Level 2, 3.
Level 3, 4. Level 4 (reg), 5. Level 5, 6. Level 6 (Maxi)” will scroll
in the display text area.
7. Use the number keypad to select the clean level.
8. Press START. The cleaning cycle will begin when the delay
time is reached.
When the self-clean cycle ends:
“CLN COMPLETE will scroll in the selected oven text area.
“OVEN COOLING” will scroll in the display until the oven
temperature falls below 500°F (260°C).
“UNLOCKING” will be displayed until the oven door unlocks and
the lock icon turns off.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
13
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven is cool. Always follow label instructions on cleaning
products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
STAINLESS STEEL (on some models)
To avoid damage to stainless steel surfaces, do not use soap-
filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-
wool pads, gritty washcloths or abrasive paper towels.
Cleaning Method:
Rub in direction of grain to avoid damage.
■ Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
■ Vinegar for hard water spots.
OVEN DOOR EXTERIOR
Cleaning Method:
■ Glass cleaner and a soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN DOOR INTERIOR
Cleaning Method:
■ Self-Clean cycle:
For optimal door cleaning result, wipe away any deposits with
a damp sponge before running cycle.
CONTROL PANEL
Activate the Button Lock to avoid touch screen activation during
cleaning. See “Button Lock” section.
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
■ Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
■ Self-Clean cycle: See “Self-Cleaning Cycle” section first.
OVEN RACKS
Cleaning Method:
■ Self-Clean cycle:
See “Self-Cleaning Cycle” section first. Remove racks, or
they will discolor and become difficult to slide. If this
happens, a light coating of vegetable oil applied to the rack
guides will help them slide.
■ Steel-wool pad
Oven Light
The ovens light is a standard 25-watt appliance bulb.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Reconnect power.
Oven Door
IMPORTANT:
To avoid oven door glass breakage:
■ Do not close the oven door if the racks are not fully inserted
into the oven cavity or when bakeware extends past the front
edge of an oven rack.
■ Do not set objects on the glass surface of the oven door.
■ Do not hit glass surfaces with bakeware or other objects.
■ Do not wipe down glass surfaces until the oven has
completely cooled.
For normal oven use, it is not suggested to remove the oven door.
However, if removal is necessary, make sure the oven is off and
cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door all the way.
2. Flip up the hinge latch on each side.
3. Close the oven door as far as it will shut.
4. Lift the oven door while holding both sides.
Continue to push the oven door closed and pull it away from
the oven door frame.
14
To Replace:
1. Insert both hanger arms into the door. 2. Open the oven door.
You should hear a “click” as the door is set into place.
3. Move the hinge levers back to the locked position. Check
that the door is free to open and close. If it is not, repeat the
removal and installation procedures.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Nothing will operate
■ Has a household fuse blown, or has a circuit breaker
tripped?
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Oven will not operate
■ Is the electronic oven control set correctly?
See “Electronic Oven Controls” section.
■ On some models, is the oven control lockout set?
See “Control Lockout” section.
Oven temperature too high or too low
■ Does the oven temperature calibration need adjustment?
See “Oven Temperature Control” section.
■ On some models, does the cooling fan run during BAKE,
BROIL or CLEAN?
It is normal for the fan to automatically run when the oven is
in use. This helps cool the electronic control.
Oven indicator lights flash
■ Do the oven indicator lights flash?
See the “Display” and/or the “Oven Lights” section. If the
indicator light(s) keeps flashing, call for service. See
“Assistance or Service” section.
Display shows messages
■ Is the display showing a flashing time?
There has been a power failure. Clear the display. See
“Display(s)” section. On some models, reset the clock, if
needed. See “Clock” section.
■ Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or
CANCEL/OFF to clear the display. See “Display(s)” section. If
it reappears, call for service. See “Assistance or Service”
section.
Self-Cleaning cycle will not operate
■ Is the oven door open?
Close the oven door all the way.
■ Has the function been entered?
See “Self-Cleaning Cycle” section.
■ On some models, has a delay start Self-Clean cycle been
set?
See “Self-Cleaning Cycle” section.
Oven cooking results not what expected
■ Is the proper temperature set?
Double-check the recipe in a reliable cookbook.
■ Is the proper oven temperature calibration set?
See “Oven Temperature Control” section.
■ Was the oven preheated?
See “Baking” section.
■ Is the proper bakeware being used?
See “Bakeware” section.
■ Are the racks positioned properly?
See “Positioning Racks and Bakeware” section.
■ Is there proper air circulation around bakeware?
See “Positioning Racks and Bakeware” section.
■ Is the batter evenly distributed in the pan?
Check that batter is level in the pan.
■ Is the proper length of time being used?
Adjust cooking time.
■ Has the oven door been opened while cooking?
Oven peeking releases oven heat and can result in longer
cooking times.
■ Are baked items too brown on the bottom?
Move rack to higher position in the oven.
■ Are pie crust edges browning early?
Use aluminum foil to cover the edge of the crust and/or
reduce baking temperature.
15
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only factory specified
parts. Factory specified parts will fit
right and work right because they are made with the same
precision used to build every new MAYTAG
®
appliance.
To locate factory specified parts in your area, call the following
customer assistance telephone number or your nearest
designated service center.
In the U.S.A.
Call Maytag Customer eXperience Center toll free:
1-800-688-9900, or visit our website at www.maytag.com
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Installation information.
■ Use and maintenance procedures.
■ Accessory and repair parts sales.
■ Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■ Referrals to local dealers, repair parts distributors and service
companies. Maytag
®
appliances designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
To locate the Maytag
®
appliances designated service
company in your area, you can also look in your telephone
directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Maytag
®
appliances with any questions or concerns at:
Maytag Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the Whirlpool Canada LP Customer eXperience Centre toll
free 1-800-807-6777 or visit our website at www.maytag.ca.
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Use and maintenance procedures.
■ Accessory and repair parts sales.
■ Referrals to local dealers, repair parts distributors and service
companies. Maytag
®
appliances designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada
LP with any questions or concerns at:
Whirlpool Canada LP
Customer eXperience Centre
200 - 6750 Century Ave
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
MAYTAG
®
BUILT-IN ELECTRIC OVEN WARRANTY
FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)
For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions
attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada, LP (hereafter “Maytag”) will pay
for factory specified replacement parts and repair labor to correct defects in materials or workmanship that existed when this major
appliance was purchased.
SECOND THROUGH TENTH YEAR LIMITED WARRANTY (CERTAIN COMPONENT PARTS ONLY - LABOR NOT INCLUDED)
In the second through tenth years from the date of original purchase, when this major appliance is installed, operated and maintained
according to instructions attached to or furnished with the product, Maytag will pay for factory specified parts for the following
components to correct non-cosmetic defects in materials or workmanship in this part that prevent function of the oven and that existed
when this major appliance was purchased. This is a limited 10-year warranty on the below named parts only and does not include labor.
■ Electric bake, broil and convection elements (excludes convection fan and motor assembly)
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THE LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
Service must be provided by a Maytag designated service company. This limited warranty is valid in the United States or Canada and
applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date
of the original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.
ITEMS EXCLUDED FROM WARRANTY
This limited warranty does not cover:
1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or
repair house fuses, or to correct house wiring or plumbing.
2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty
coverage.
16
3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is
contrary to published user or operator instructions and/or installation instructions.
4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in
accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Maytag.
5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage
results from defects in materials or workmanship and is reported to Maytag within 30 days from the date of purchase.
6. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be
repaired in the home and only in-home service is covered by this warranty.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
8. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an
authorized Maytag servicer is not available.
9. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance
with published installation instructions.
10. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty
is void if the factory applied serial number has been altered or removed from your major appliance.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not
allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the
representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with
this major appliance, you should ask Maytag or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
MAYTAG SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the
exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives
you specific legal rights, and you also may have other rights that vary from state to state or province to province.
If outside the 50 United States and Canada, contact your authorized Maytag dealer to determine if another warranty applies.
If you think you need repair service, first see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the
problem after checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling
Maytag. In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777. 1/12
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your major appliance
to better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label located on the product.
Dealer name____________________________________________________
Address ________________________________________________________
Phone number__________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
17
SÉCURITÉ DU FOUR
Risque possible de décès ou de blessure grave si vous ne
suivez pas immédiatement les instructions.
Risque possible de décès ou de blessure grave si vous
ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et
ce qui peut se produire en cas de non-respect des instructions.
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de
toujours lire tous les messages de sécurité et de vous y conformer.
AVERTISSEMENT
DANGER
Voici le symbole d’alerte de sécurité.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous
et à d’autres.
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
CONSERVEZ CES INSTRUCTIONS
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
AVERTISSEMENT :
Pour réduire le risque d’incendie, de
choc électrique, de blessures corporelles ou de dommages
lors de l’utilisation du four, il convient d’observer certaines
précautions élémentaires dont les suivantes :
■
Installation appropriée – S’assurer que le four est
convenablement installé et relié à la terre par un technicien
qualifié.
■
Ne jamais utiliser le four pour chauffer ou réchauffer
une pièce.
■
Ne pas laisser les enfants seuls – Les enfants ne doivent
pas être laissés seuls ou sans surveillance dans la pièce
où le four est en service. Ne jamais laisser les enfants
s’asseoir ou se tenir sur une partie quelconque du four.
■
Porter des vêtements appropriés – Les vêtements amples
ou détachés ne doivent jamais être portés pendant
l’utilisation du four.
■
Entretien par l’utilisateur – Ne pas réparer ni remplacer
toute pièce du four si ce n’est pas spécifiquement
recommandé dans le manuel. Toute autre opération
d’entretien ou de réparation doit être confiée à un
technicien qualifié.
■
Ne pas utiliser d’eau pour éteindre un feu de graisse –
Étouffer le feu ou les flammes ou utiliser des extincteurs
polyvalents à produits chimiques secs ou un extincteur à
mousse.
■
Utiliser seulement des mitaines sèches de four – Des
mitaines de four mouillées ou humides sur des surfaces
chaudes peuvent provoquer des brûlures provenant de la
vapeur. Ne pas laisser les mitaines de four toucher les
éléments chauffants. Ne pas utiliser une serviette ou un
tissu épais.
■
Exercer une grande prudence lors de l’ouverture de la
porte. Laisser l’air chaud ou la vapeur s’échapper avant
d’enlever ou de remplacer un plat.
■
Ne pas faire chauffer des contenants fermés –
L’accumulation de pression peut causer une explosion du
contenant et des blessures.
■
Ne jamais obstruer les ouvertures des évents.
■
Placement des grilles du four – Toujours placer les grilles
du four à l’endroit désiré, lorsque le four est froid. Si la
grille doit être déplacée lorsque le four est chaud, ne pas
laisser des mitaines de four toucher l’élément chauffant
dans le four.
■
Remisage dans le four – Des matériaux inflammables ne
doivent pas être remisés dans un four.
■
NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU
LES SURFACES INTÉRIEURES DU FOUR – les éléments
chauffants peuvent être chauds même s’ils ont une teinte
foncée. Les surfaces intérieures de four deviennent assez
chaudes pour causer des brûlures. Pendant et après
l’utilisation, ne pas toucher ou laisser des vêtements ou
autres matériaux inflammables venir en contact avec les
éléments chauds ou les surfaces intérieures chaudes du
four avant qu’ils aient eu assez de temps pour refroidir.
D’autres surfaces du four peuvent devenir assez chaudes
pour causer des brûlures. Ces surfaces comprennent les
ouvertures de l’évent du four et la surface près de ces
ouvertures, les portes du four et les hublots des portes
du four.
Fours autonettoyants :
■
Ne pas nettoyer le joint de la porte – Le joint de la porte est
essentiel pour l’étanchéité. Veiller à ne pas frotter,
endommager ou déplacer le joint.
■
Ne pas utiliser les produits commerciaux de nettoyage de
four – On ne doit pas utiliser un produit commercial de
nettoyage de four ou un enduit de protection des surfaces
internes du four quel qu’en soit le type, sur les surfaces du
four ou les surfaces voisines.
■
Nettoyer uniquement les pièces indiquées dans le manuel.
■
Avant d’exécuter le programme d’autonettoyage du four,
enlever la lèchefrite et sa grille et les autres ustensiles.
18
PIÈCES ET CARACTÉRISTIQUES
Ce manuel couvre différents modèles. Le four que vous avez acheté peut comporter tous les articles énumérés ou seulement certains
d'entre eux. L’emplacement et l’apparence des caractéristiques illustrées peuvent ne pas correspondre à ceux de votre modèle.
A. Commande électronique du four
B. Évent du four
C. Plaque signalétique
(située sur l'évent central sous le
tableau de commande)
D. Élément de cuisson au gril
E. Joint d'étanchéité
F. Éve nt du bas
G. Four inférieur (sur les modèles à double four)
H. Élément de cuisson au four non visible
I. Lampes du four (côté gauche non visible)
J. Loquet de verrouillage de la porte du four et
commutateur d'éclairage du four
Pièces et caractéristiques non
illustrées
Grilles du four
Avertissements de la proposition 65 de l'État de Californie :
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
A
B
C
D
E
F
G
H
I
J
19
COMMANDES ÉLECTRONIQUES DU FOUR
Ce manuel couvre différents modèles. Le four que vous avez acheté peut comporter tous les articles énumérés ou seulement certains
d'entre eux. Les emplacements et aspects des articles illustrés ci-dessous peuvent ne pas correspondre à ceux de votre modèle.
Les commandes du four sont accessibles à partir de son tableau de commande.
Tableau de commande du four simple
Tableau de commande du four double
Affichage
Lors de la mise sous tension initiale du four ou si une panne de
courant se produit, “12:00” apparaît sur l’affichage. Voir
“Horloge” dans la section “Réglages” pour régler l'heure.
Lorsque le four n’est pas en marche, l’afficheur indique l’heure.
Annulation
Les touches Cancel (annulation) arrêtent toutes les fonctions à
l’exception de la minuterie, du verrouillage des commandes.
Lampes du four
Alors que les portes des fours sont fermées, appuyer sur OVEN
LIGHT (lampe du four) pour allumer ou éteindre les lampes. Les
deux lampes du four s'allument à l'ouverture de l'une des portes.
Les lampes de fours ne s’allument pas durant le programme
d’autonettoyage.
Minuterie de cuisine
La minuterie de cuisine peut être réglée en heures ou en minutes
jusqu’à concurrence de 9 heures et 59 minutes, et procède à un
compte à rebours de la durée réglée. La minuterie de cuisine ne
met pas en marche le four et ne l'éteint pas.
Réglage :
1. Appuyer sur KITCHEN TIMER (minuterie de cuisine).
“Régler minuterie” défile dans la zone d'affichage texte et
l'horloge affiche “--:--”.
2. Utiliser le clavier numérique pour entrer la minuterie
souhaitée.
“Appuy. sur MINUT.” défile dans la zone d'affichage texte.
A. Commandes du four
B. Affichage électronique
C. Clavier numérique
D. Durée de cuisson
E. Mise en marche différée
F. Cuisson et maintien au chaud
G. Autonettoyage
H. Verrouillage des commandes
(maintenir 3 sec.)
I. Réglages
J. Minuterie de cuisine
K. Lampe du four
L. Horloge
M. Annulation
N. Mise en marche
A. Commandes du four supérieur
B. Affichage électronique
C. Clavier numérique
D. Durée de cuisson
E. Mise en marche différée
F. Cuisson et maintien au chaud
G. Autonettoyage
H. Verrouillage des commandes
(maintenir 3 sec.)
I. Réglages
J. Minuterie de cuisine
K. Lampe du four
L. Horloge
M. Annulation four inférieur
N. Mise en marche
O. Annulation four supérieur
P. Commandes du four inférieur
A
B
C
N
M
L
K
J I
H
D
E
F G
B
C D
E
F
G
J
I
H
L
K
M
N
O
A
P
20
3. Appuyer sur KITCHEN TIMER (minuterie de cuisine) pour
démarrer la minuterie. Le compte à rebours commence.
“MINUT. dém” défile dans la zone d'affichage texte.
La dernière minute du compte à rebours de la minuterie
s’affiche en secondes.
Lorsque la durée réglée est écoulée, un long bip sonore
retentit et “MINUTERIE fin” s’affiche.
4. Appuyer sur KITCHEN TIMER (minuterie de cuisine) pour
effacer l’affichage.
REMARQUE : Un bip sonore de rappel retentit jusqu'à ce
qu'on annule la minuterie.
Annulation :
Appuyer sur KITCHEN TIMER (minuterie de cuisine).
Réglages
Fahrenheit et Celsius
La température est préréglée à l'usine pour un affichage en
degrés Fahrenheit, mais on peut le permuter en degrés Celsius.
1. Appuyer une fois sur SETTINGS (réglages).
“UNITÉS TEMP” apparaît dans la zone de texte.
“FAHRENHEIT. Appuyer sur 1 pour Celsius” défile dans la
zone de texte.
2. Appuyer sur la touche numérique “1” pour modifier le réglage
d'unité de température.
3. “CELSIUS Sélectionné” défile dans la zone de texte. Les
unités de température ont été modifiées.
4. Appuyer sur SETTINGS (réglages) puis suivre les instructions
à l'écran pour revenir aux degrés Fahrenheit.
Signaux sonores
Les signaux sonores indiquent ce qui suit :
Fonctions basiques
Un seul signal sonore
■ Appui sur une touche valide
■ Fonction entrée
■ Four préchauffé
Trois signaux sonores
■ Appui sur une touche non valide
Quatre signaux sonores
■ Fin de programme
■ Fin de minuterie de cuisine
Ajustement de son - Marche ou arrêt
Le son du four est préréglé à l'usine sur Marche mais peut être
modifié et réglé à Arrêt.
1. Appuyer deux fois sur SETTINGS (réglages). “SON” apparaît
dans la zone de texte, et “ON. Appuyer sur 1 pour OFF” défile
dans la zone de texte.
2. Appuyer sur la touche numérique “1” pour désactiver le son.
3. “OFF Sélectionné” défile dans la zone de texte. Le son est
désormais désactivé.
4. Appuyer deux fois sur SETTINGS (réglages) puis suivre les
instructions à l'écran pour ramener le réglage de son à On
(marche).
Ajuster le volume sonore
Le volume sonore du four est préréglé à l'usine sur Élevé mais
peut être modifié et réglé à Bas.
1. Appuyer trois fois sur SETTINGS (réglages). “VOLUME SON”
apparaît dans la zone de texte et “ÉLEVÉ. Appuyez sur 1 pour
Bas” défile dans la zone de texte.
2. Appuyer sur la touche numérique “1” pour régler le son au
niveau faible.
3. “Bas Sélectionné” défile dans la zone de texte. Le volume
sonore est désormais modifié.
4. Appuyer trois fois sur SETTINGS (réglages) puis suivre les
instructions à l'écran pour ramener le réglage de son à Élevé.
Réglage du signal de fin - Marche ou arrêt
Le signal de fin est préréglé à l'usine sur Marche mais peut être
modifié et réglé à Arrêt.
1. Appuyer quatre fois sur SETTINGS (réglages). “SIGNAL FIN”
apparaît dans la zone de texte, et “ON. Appuyer sur 1 pour
OFF” défile dans la zone de texte.
2. Appuyer sur la touche numérique “1” pour désactiver le
signal de fin.
3. “OFF Sélectionné” défile dans la zone de texte. Le signal de
fin est désormais désactivé.
4. Appuyer quatre fois sur SETTINGS (réglages) puis suivre les
instructions à l'écran pour ramener le réglage de son à On
(marche).
Réglage du son de pression sur les touches - Marche ou
arrêt
Le son de pression sur les touches est préréglé à l'usine sur
Marche mais peut être modifié et réglé à Arrêt.
1. Appuyer cinq fois sur SETTINGS (réglages). “TOUCHES
SON” apparaît dans la zone de texte, et “ON. Appuyer sur 1
pour OFF” défile dans la zone de texte.
2. Appuyer sur la touche numérique “1” pour désactiver le son
de pression sur une touche.
3. “OFF Sélectionné” défile dans la zone de texte. Le signal de
pression sur les touches est désormais désactivé.
4. Appuyer cinq fois sur SETTINGS (réglages) puis suivre les
instructions à l'écran pour ramener le réglage de son de
pression sur une touche à On (marche).
Réglage du signal de rappel - Marche ou arrêt
Le signal de rappel est préréglé à l'usine sur Marche mais peut
être modifié et réglé à Arrêt.
1. Appuyer six fois sur SETTINGS (réglages). “SIGNAL
RAPPEL” apparaît dans la zone de texte, et “ON. Appuyer sur
1 pour OFF” défile dans la zone de texte.
2. Appuyer sur la touche numérique “1” pour désactiver le son
de rappel.
3. “OFF Sélectionné” défile dans la zone de texte. Le signal de
rappel est désormais désactivé.
4. Appuyer six fois sur SETTINGS (réglages) puis suivre les
instructions à l'écran pour ramener le réglage de son de
rappel à On (marche).
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Maytag MEW7627AW Manuel utilisateur
- Catégorie
- Fours
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Maytag MEW7627AW User manual