Honeywell CL201AE Portable Evaporative Air Cooler Manuel utilisateur

Marque: Honeywell

Modèle: CL201AE Portable Evaporative Air Cooler

Catégorie: Humidificateurs

Taper: Manuel utilisateur

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

Refroidisseur d'air par évaporation portatif

Mode d'emploi

Lire ces instructions avant l'utilisation et les conserver

Enfriador de Aire Evaporativo Portátil

Manual de Instrucciones

Lea y guarde estas instrucciones antes de usar la unidad

Model / Modèle / Modelo:

CL201AE/ CL201AEWW

Customer Support:

Assistance Au Client:

Servicio de atencion a clientes:

Web: www.jmatek.com

Call us toll-free: 1-800-474-2147

USA: [email protected]

CANADA^: [email protected]

^ Canada Customer Support service available for models sold in Canada only.

^ Le Service Client Canadien est disponible uniquement pour les modèles vendus sur le territoire Canadien.

^ Servicio de Atención A Clientes en Canadá disponible solo para modelos vendidos en Canadá.

THANK YOU

SAFETY RULES

Congratulations on your purchase of this Honeywell Evaporative Air Cooler.

The Safety & Maintenance Guide and the separate User Manual are intended to provide you with

important information needed to set up, operate, maintain and troubleshoot this product.

The Air Cooler Guide and User Manual are intended to provide important information needed to

set up, operate, maintain and troubleshoot your Air Cooler. Failure to follow these instructions may

damage and/or impair its operation, create hazards, and void the warranty. In case there is any

inconsistency or conﬂict between the English version and any other language version of the content

of this material, the English version shall prevail.

WARNING—READ AND SAVE THE AIR COOLER GUIDE AND USER MANUAL

READ AND SAVE THESE INSTRUCTIONS:

When using electrical appliances, basic safety precautions should always be followed:

This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

DO NOT operate with a damaged cord or plug. If the supply cord is damaged, it must be replaced

with a supply cord which is as per manufacturers speciﬁcations, by the authorized service centre

or its service agent or a similarly qualiﬁed person in order to avoid a hazard.

Before operating the product, remove the packaging and check that product is in good condition.

DO NOT allow children to play with this appliance, packaging or plastic bags.

Check the household voltage to ensure it matches the appliance’s rating speciﬁcations.

DO NOT use an extension cord with this unit.

DO NOT run power cord under carpeting, or cover it with rugs or runners. Keep the cord away from

areas where it may be tripped over.

Always ensure the water tank is ﬁlled with water above the "min." level mark, when operating the

air cooler in evaporative COOLING mode.

Always unplug the Air Cooler before reﬁlling the water tank, cleaning, servicing or relocating the

unit.

•

SAFETY RULES (CONTINUED)

Never pull the cord. Remove it from the electrical outlet/ socket by grasping and pulling on the

plug-end of the cord.

This appliance has been manufactured for use in domestic environments and must not be used

for other purposes.

DO NOT use in areas where gasoline, paint or other ﬂammable goods and objects are stored.

DO NOT operate the unit on COOL setting with an empty tank as this may result in damage to the

water pump.

DO NOT attempt to repair or adjust any electrical or mechanical functions of the Air Cooler, as

this may void the warranty.

DO NOT cover the cooler’s air inlet or outlet, as this may damage the motor.

DO NOT insert or allow objects to enter any ventilation or exhaust opening, as this may damage

the unit and may cause electrical shock or ﬁre.

DO NOT operate with the Honeycomb Cooling Media removed, as this will overload and damage

the motor.

DO NOT leave the operating appliance unattended for an extended period of time.

DO NOT operate this unit if it is damaged or malfunctions. Refer to the Troubleshooting section.

If problem still exists contact the Customer Support Center.

Always place the unit on a dry level ﬂoor.

DO NOT use in bathrooms or near water. DO NOT keep the product where it may fall into water or

a water container.

Store in a dry area when not in use.

Always grip the side handles to move the Air Cooler.

WARNING: To reduce the risk of ﬁre or electric shock, do not use this appliance with any solid

state speed control device.

•

USER TIPS

Honeywell Evaporative Air Coolers are built to maximize energy efficiency and keep energy costs

low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped

from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the

Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air. A

fan propels the cooled air out into the room. This no-compressor system cools naturally, efﬁciently

and inexpensively.

The recommended maximum relative humidity level is 60% or less, which allows a noticeable

temperature decrease. The temperature will be lower in drier climates because higher evaporation

occurs when the humidity is low.

What is Evaporative Cooling?

Evaporative Air Cooling Mechanism

Honeycomb Cooling Media

Warm Air Cool Air

Pump Water

NOTE

When the product is used for the ﬁrst time the Honeycomb Cooling Media will have an odor which

will dissipate in a few hours or so of initial use.

COOLER LOCATION

Indoors

Place the cooler in front of an open door or window. Ensure that there is adequate cross-ventilation

in the room by leaving a door or window open opposite the cooler.

The Evaporative Air Cooler should not be used in enclosed spaces. It must be kept level and there

must be water in the water tank. Doors and windows should be opened to allow free air flow. The

Evaporative Air Cooler works best when placed near an open window, so that outside air is drawn into

the Evaporative Air Cooler, circulates in the room, then exits via the door. The maximum cooling effect

is felt when a person is near the ﬂow of air coming out of the Evaporative Air Cooler. The Evaporative

Air Cooler produces moisture and can be used to humidify dry air. To be used for humidiﬁcation the

windows and doors should be closed.

To maximize efﬁciency, position the Air Cooler according to the following guidelines:

IMPORTANT: The evaporative air cooler is not an air conditioner as it does not use a compressor or

refrigerant gas. It should not be expected to cool as efﬁciently as a refrigerated air conditioner.

IMPORTANT: Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not

recommended to be placed outdoors during heavy rain or snow.

Outdoors (for outdoor models only)

Use only on GFCI Protected outlets/ sockets (for USA only). Press the TEST button (then RESET

button) every month to ensure proper operation.

Power cords must be secured to avoid tripping.

The wiring and connections must be protected from water. The electrical plug and Air Cooler

connections must be dry at all times. When used outdoors, insert the air cooler electrical plug

into an IP44 compliant outdoor electrical outlet.

Set the unit on a solid ﬂat surface.

•

STORAGE AND MAINTENANCE GUIDELINES

Read the detailed CLEANING & DRAINING THE WATER TANK instructions for your Air Cooler, located

in the separate User Manual. Below is a general guideline for maintenance and storage of your Air

Cooler.

WARNING: Always switch OFF the Air Cooler and unplug it from the electrical source before

cleaning or maintenance.

Cleaning

At least once a week, drain the water tank completely and reﬁll with fresh water. Doing this will greatly

reduce mineral deposits and help to extend the life of the Honeycomb Cooling Media.

End of Season Storage

If the Air Cooler will not be used for a long time:

Make sure all parts are dry by running the Fan Only mode for about 1 to 2 hours before storing

(time depends on ambient humidity conditions).

Switch OFF the Air Cooler and unplug from the power supply.

Empty/drain all the water from the tank. Note: If the unit is connected to a continuous water

supply, you must switch off the water supply and remove the drain tube before draining the

water tank. This function is only available on some Honeywell Air Cooler models. Check the User

Manual to see if your unit has the Continuous Water Supply Function.

Clean the water tank with a damp cloth to wipe away any dust or mineral deposits.

Remove the Honeycomb Cooling Media and Carbon Dust Filter* from the Air Cooler and rinse

under fresh water to remove dust and dirt.

Replace the Honeycomb Cooling Media and Carbon Dust Filter* after they are clean and dry.

To protect the unit from dust, moisture and scratches, cover with a clean cloth, tarp or plastic bag

before storing.

Coil the power cord and store it away from the ﬂoor to protect it.

Store this unit at room temperature in a dry location, away from direct sunlight and/or very hot,

cold or damp environments.

•

Carbon Dust Filter is available in speciﬁc models of Honeywell Air Coolers only.

Check the Parts Description in the User Manual for your model to see if it includes a Carbon

Dust Filter.

TROUBLESHOOTING GUIDE

Customer Service Center Contact: See last page of User Manual.

PROBLEM POSSIBLE CAUSE SOLUTION

No discharge of

air.

Cord is not plugged in. Make sure power cord is plugged in and the switch is

ON.

Power is not ON.

Turn the unit ON by pressing the power button on the

control panel / remote control or turn the SPEED

knob.

Not Cooling /

Unit is making

noise.

Pump is not turned ON. Turn on COOL function from remote or control panel.

Low or no water in tank,

when COOL is selected. Reﬁll water tank.

Damaged Pump or

Calcium deposits on

blower.

Contact Customer Service Center.

Excessive

humidity in the

room.

In cooling mode, the Air

Cooler produces moisture

as a result of evaporative

cooling. This is normal.

The Air Cooler cools best in dry climates. If the

ambient humidity level is high (approx. 60% or

above), refrain from using the Air Cooler until ambient

humidity is reduced.

Make sure the window/doors are open and there

is adequate cross-ventilation in the room so that

the moisturized air can circulate better. Do not use

the evaporative cooling function on days with high

ambient humidity.

Odors.

When the Cooler is new.

When the unit is used for the ﬁrst time, the

Honeycomb Cooling Media will have an odor, which

will dissipate within a few hours of initial use.

Algae or mold due to

moist parts. In very damp

conditions, algae may

form.

Check the Honeycomb Cooling Media. If you see

mold spots on the media or suspect an algae issue,

remove and replace the Honeycomb Cooling Media.

Contact the Customer Service Center for more

information.

TROUBLESHOOTING GUIDE (CONTINUED)

PROBLEM POSSIBLE CAUSE SOLUTION

Remote control

does not work.

Remote control batteries

are old & used or inserted

incorrectly in the battery

compartment.

Replace with new batteries. Follow the polarity guide

inside the battery compartment.

Damaged remote control. If replacing new batteries in the correct position does

not work, contact the Customer Service Center.

The unit does

not

respond.

Damaged Control Panel

on unit.

Try to activate the unit with the Remote Control. If the

unit responds, then the Control Panel on the unit may

be experiencing problems - contact the Customer

Service Center.

If neither the Remote Control or the Control Panel is

working, contact the Customer Service Center.

The outdoor Air

Cooler is wet

from rain.

The Air Cooler was placed

outdoors (this is only

allowed for outdoor Air

Cooler models) and

soaked by heavy rain.

A small amount of rain on the unit is not a problem as

long as the electrical plug and outlet are dry. If they

are wet, DO NOT touch the unit or electrical plug/

outlet. Switch off the master power for the outlet

before unplugging the unit from the electrical outlet.

Make sure all outlets and plugs are dry before use.

The Air Cooler is designed to IPX4 product standards

and not recommended to be placed outdoors

during heavy rain conditions. Do not operate the Air

Cooler when wet. Wait for the Air Cooler to dry before

plugging in and turning on the unit again.

The batteries contain materials, which are hazardous to the environment; they must be removed

from the appliance before it is scraped and that they are disposed of safely.

Correct Disposal of this product.

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the

environment or human health from uncontrolled waste disposal. recycle it

responsibly to promote the sustainable reuse of material resources. To return

your used device, please use the return and collection systems or contact

the retailer where the product was purchased. They can take this product for

environmental safe recycling.

1) Control Panel 6) Ice Compartment Lid with

Water Regulator Knob

2) Handle 7) Water Level Indicator

3) Louvers 8) Remote Control

4) Power Cord & Plug 9) Water Fill Door

5) Casters 10) Drain Plug

PARTS DESCRIPTION

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

USE & OPERATION

CONTROL PANEL

COOL

SWING POWER

SPEED

HIGH E

LOW

TIMER

1HR

2HR 4HR

8HR

MODE

NATURAL

NORMAL

SLEEP

FUNCTION BUTTONS

POWER

Press the POWER button to turn the unit on. The cooler will start automatically at medium speed.

After a few seconds the speed will switch to low. To turn the unit off, press the button again.

MODE

Press the MODE button to select your desired wind type: NORMAL - NATURAL - SLEEP.

NORMAL :You can select either High, Medium or Low fan speeds.

NATURAL The fan speed alternates between High, Medium, Low and Off to mimic a natural breeze.

SLEEP This mode is for comfort during the night. When the SLEEP mode is selected, the airﬂow

will randomly vary between High, Medium and Low.

SPEED

Press the SPEED button repeatedly to change the speed between High - Med - Low.

TIMER

Press the TIMER button until the desired time duration setting is selected. When the set time has

passed, the unit will automatically turn off (unit remains in Standby mode until power cord is

unplugged from electrical socket). The TIMER function allows you to program the unit for up to 8

hours of use.

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

In cooling mode, Honeywell Air Coolers provide cool, moist air through

the evaporation of water. There is a manual Water Regulator knob located

in the ice compartment of the unit. This allows you to adjust the amount

of water pumped over the Honeycomb Cooling Media, thus helping to

control cooling and humidiﬁcation levels.

When the Water Regulator is set to MIN, the water pump distributes a

minimal amount of water to the Honeycomb Cooling Media. This results in

less water evaporation and reduces the cooling effect.

When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water

to the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling

performance.

SWING

Press the SWING button until the SWING indicator light is illuminated on

the control panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical

air ﬂow.

ROOM COOLING AND HUMIDIFYING

COOL

Press the COOL button until the COOL indicator light is illuminated on the control panel. This

activates evaporative cooling. The water pump will operate and you will feel the cooler air after the

Honeycomb Cooling Media is completely wet. When the COOL indicator light is switched OFF, the

unit can still function in a fan only mode (without evaporative cooling).

Water Regulator

MAX

MIN

Louver

Movement

USE & OPERATION (CONTINUED)

REMOTE CONTROL

Make sure to position the air cooler correctly before you set up and start using the product.

Please refer to the COOLER LOCATION (IMPORTANT TO READ) section of the separate Safety &

Maintenance Guide.

COOLER LOCATION

NOTE:

TIMER

SPEED

COOL

MODE SWING

ON/OFF

•

The remote control requires AAA (2 x 1.5V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert the batteries inside.

Care must be taken to insert the batteries according to the correct polarity (+ / –) markings

shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

POWER :

ON / OFF

Controls cooling or fan option

Controls the motion of the louvers

Controls the Timer function for automatic off

Switch between Normal, Natural & Sleep

Low / Medium / High

COOL

SWING

MODE

SPEED

TIMER

USE & OPERATION (CONTINUED)

CAUTION:

Unplug the unit from the electrical power outlet before emptying or

reﬁlling the water tank.

Open the Water Fill Door located on the side of the unit.

The Water Level Indicator is located at the front of the unit. Refill the

water tank when water level is low. Do not fill water above the "Max."

water level mark to avoid water droplets collecting on the louvers. Check

the water level in the tank before running the COOL function. Make

sure that the water in the tank is above the minimum water level mark.

Running the unit in COOL mode with inadequate water may cause

pump failure.

Note: If ice is available, you may add ice in the top ice compartment to

enhance the cooling performance.

Note: The water capacity refers to the total volume of water that can be

contained within the air cooler water tank and water distribution system.

The water capacity in the tank at the “Max.” indicator level may be lower

than the actual water capacity of the air cooler.

WARNING: Do not fill water tank with dirty water or salt water. This can

damage the unit and Honeycomb media.

FILLING WITH WATER

Ice Compartment

Water

Fill Door

USE & OPERATION (CONTINUED)

LOW WATER ALARM

CLEANING & DRAINING THE WATER TANK

If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE

GUIDELINES located in the separate Safety & Maintenance Guide.

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the

minimum level, you will hear a beeping sound and the indicator light will ﬂash continuously. The unit

will automatically pause evaporative cooling.

Reﬁll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug

from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and

switch ON again.

To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the

unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low Water

Alarm will sound again if the COOL function is activated while the water tank is still empty.

Move the unit to a location where the water can be drained. Remove the cap from the Drain plug

located at the bottom of the unit. Allow the tank to empty.

Reﬁll the water tank with clean water, up to the maximum level and drain it completely.

Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

When the product is not in use, store the unit in a dry place out of direct sunlight.

•

USE & OPERATION (CONTINUED)

CLEANING THE CARBON DUST FILTER AND HONEYCOMB COOLING MEDIA

The appliance is supplied with a Carbon Dust Filter and Honeycomb Cooling Media.

The Carbon Dust Filter and Honeycomb Cooling Media are located inside the Rear Grill. (See Figure 1)

and see below for instructions on how to remove them from the unit for cleaning.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and

reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb media depends on local air and water conditions.

In areas where the mineral content of water is high, mineral deposits may build up on the

Honeycomb Cooling Media and restrict air ﬂow. Draining the water tank and reﬁlling with fresh

water at least once a week will help reduce mineral deposits. If mineral deposits remain on the

Honeycomb Cooling Media, the media should be removed and washed under fresh water. The

media should be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool

function 15 minutes before turning the unit off.

•

Carefully push down and pull out the rear grill from

the cooler.

Pull out the Carbon Dust Filter and clean with water

as needed.

Remove all the screws from the Rear Frame and

carefully pull it off the air cooler.

To release the Honeycomb Media, remove the

screws securing the Honeycomb on the Rear Frame

and slide the Honeycomb out of the frame.

Replace or clean media with water and a damp

cloth as needed.

Removing the Carbon Dust Filter / Honeycomb Cooling Media:

WARNING: DO NOT operate the Air Cooler when

the Rear Grill or Rear Frame is removed from the Air

Cooler, or if there is a loose-fitting Rear Grill or Rear

Frame. Doing so can cause serious injury or dangerous

electrical shock.

Honeycomb

Cooling Media

Carbon Dust

Filter

Screws

Rear Grill

Figure 1:

Rear Frame

MERCI

RÈGLES DE SÉCURITÉ

Nous vous félicitons d’avoir acheté ce refroidisseur d’air par évaporation de Honeywell.

Le Guide de sécurité et d’entretien et le Manuel de l’utilisateur ont tous deux pour but de vous

communiquer des renseignements importants pour l’installation, l’utilisation, l’entretien et le

dépannage de cet appareil.

Le Guide et le Manuel de l’utilisateur du refroidisseur d’air sont destinés à fournir des renseignements

importants pour l’installation, l’utilisation, l’entretien et le dépannage de votre refroidisseur d’air.

Ne pas suivre ces consignes pourrait endommager l’appareil et/ou perturber son fonctionnement,

provoquer des risques et annuler la garantie. En cas d'incoherence ou de conflit entre la version

anglaise et tout autre version linguistique du contenu de ce materiel, la version anglaise prévaudra.

AVERTISSEMENT - LIRE ET CONSERVER LE GUIDE ET LE MANUEL DE L’UTILISATEUR DU

REFROIDISSEUR D’AIR

LIRE ET CONSERVER CES CONSIGNES:

En utilisant des appareils électriques, les mesures de sécurité élémentaires suivantes doivent toujours

être prises:

Cet appareil peut être utilisé par des enfants âgés de 8 ans et plus, ainsi que des personnes ayants

des capacités réduites au niveau physique, sensoriel ou mental, ou un manque d’expérience et de

connaissances si ils ont été supervisés ou instruits à propos de l’utilisation de l’appareil de manière sûre

et s’ils ont compris les risques encourus. Les enfants de devront pas jouer avec l’appareil. Le nettoyage

ou la maintenance ne devra pas être effectuée par des enfants, sauf si ces derniers sont âgés de plus de

8 ans et s’ils sont supervisés.

NE PAS utiliser avec une prise ou un cordon endommagés. Si le cordon d'alimentation est endommagé,

il doit être remplacé par un cordon d'alimentation conforme aux spéciﬁcations du fabricant, par le centre

de service agréé, son intermédiaire de service ou une personne qualiﬁée aﬁn d'éviter tout danger.

Avant d’utiliser l’appareil, il convient de le déballer et de s’assurer qu’il est en bon état.

NE PAS permettre aux enfants de jouer avec cet appareil, son emballage ou les sacs en plastique.

Vériﬁez la tension résidentielle aﬁn de s’assurer qu’elle convient aux spéciﬁcations de l’appareil.

NE PAS utiliser une rallonge électrique avec cet appareil.

NE PAS faire passer le cordon électrique sous la moquette ou le recouvrir avec un tapis ou un chemin de

couloir. Garder le cordon à l’écart des endroits où ils risquent de causer une chute.

S’assurer à tout moment que l’eau dans le réservoir dépasse la marque du niveau "min.", lorsque le

refroidisseur d’air fonctionne en mode REFROIDISSEMENT par évaporation.

Toujours débrancher le refroidisseur d’air avant d’en remplir le réservoir d’eau, de le nettoyer, d’en faire

l’entretien ou de le déplacer.

•

RÈGLES DE SÉCURITÉ (SUITE)

Ne jamais tirer sur le cordon. Pour débrancher l’appareil, il convient de saisir la ﬁche et de la retirer

hors de la prise électrique.

Cet appareil a été fabriqué pour être utilisé en milieu domestique et ne doit pas être utilisé

à d’autres ﬁns.

NE PAS utiliser dans des endroits où de l’essence, de la peinture ou d’autres produits ou objets

inﬂammables sont rangés.

NE PAS faire fonctionner l’appareil en mode COOL (refroidissement) avec un réservoir vide au

risque d’endommager la pompe à eau.

NE PAS tenter de réparer ou de régler les fonctions électriques ou mécaniques du refroidisseur

d’air, car cela risque d’annuler la garantie.

NE PAS couvrir l’entrée ou la sortie d’air du refroidisseur, car cela risque d’endommager le moteur.

NE PAS insérer ou laisser un objet pénétrer dans une quelconque ouverture de ventilation ou d’

évacuation, car cela risque d’endommager l’appareil et de causer une décharge électrique ou

un incendie.

NE PAS faire fonctionner l’appareil sans le système de refroidissement en nid d’abeilles, car cela

surchargera et endommagera le moteur.

NE PAS laisser l’appareil en marche sans surveillance durant une longue période.

NE PAS continuer de faire fonctionner l’appareil s’il est endommagé ou défectueux. Voir la

section Dépannage. Si le problème persiste, contacter le centre de soutien à la clientèle.

Placer systématiquement l’appareil sur une surface plane et sèche.

NE PAS utiliser dans les salles de bains ou à proximité de l’eau. NE PAS placer l’appareil dans un

endroit où il risque de tomber dans l’eau ou dans un contenant d’eau.

Lorsqu’il n’est pas utilisé, le ranger dans un endroit sec.

Toujours déplacer le refroidisseur d’air au moyen de ses poignées latérales.

AVERTISSEMENT: Afin de réduire les risques d’incendie ou de décharges électriques, ne pas

utiliser cet appareil avec toute commande de vitesse à semi-conducteur.

•

CONSEILS D’UTILISATION

Les refroidisseurs d’air par évaporation portatifs de Honeywell sont conçus afin de maximiser

l’efficacité énergétique à faibles coûts. L’air chaud est aspiré dans le refroidisseur et entre dans

le système de refroidissement en nid d’abeilles. L’eau pompée du réservoir se déverse sur le système

de refroidissement en nid d’abeilles. Lorsque l’air chaud circule dans le système de refroidissement

en nid d’abeilles, l’eau absorbe la chaleur, refroidissant et humidifiant naturellement l’air.

Un ventilateur projette l’air refroidi dans la pièce. Ce système sans compresseur rafraîchit d’une

façon naturelle, efﬁcace et peu coûteuse.

Le taux d’humidité relative maximal recommandé est de 60% ou moins, ce qui permet une diminution

perceptible de la température. La température sera plus faible en climat sec, car une plus grande

évaporation se produit lorsque l’humidité est faible.

Qu’est-ce que le refroidissement par évaporation?

Mécanisme de refroidissement d’air par évaporation

REMARQUE

Lorsque l’appareil sera utilisé pour la première fois, une odeur se dégagera du système de

refroidissement en nid d’abeilles, puis se dissipera dans les quelques heures suivant l’utilisation

initiale.

Raccord d’alimentation

continue en eau

Air chaud Air froid

Pump Eau

POSITION DU REFROIDISSEUR D’AIR

À l’intérieur

Placer le refroidisseur d’air devant une porte ou une fenêtre ouverte. S’assurer d’une ventilation

transversale adéquate dans la pièce en laissant une porte ou une fenêtre ouverte à l’opposé du

refroidisseur d’air.

Le refroidisseur d’air par évaporation ne doit pas être utilisé dans des espaces clos. Il doit être de

niveau et son réservoir doit contenir de l’eau en tout temps. Les portes et fenêtres doivent être

ouvertes pour permettre la circulation d’air. L’efficacité du refroidisseur d’air par évaporation est

optimale lorsqu’il est placé près d’une fenêtre ouverte de manière à ce que l’air extérieur y soit

aspiré, puis circule dans la pièce et en sorte par la porte. Pour ressentir l’effet de refroidissement

maximal, il convient de demeurer à proximité de l’air sortant du refroidisseur d’air par évaporation. Le

refroidisseur d’air par évaporation produit de l’humidité et peut être utilisé pour humidiﬁer l’air sec. S’il

est utilisé pour l’humidiﬁcation, les fenêtres et portes doivent être fermées.

Afin d’en maximiser l’efficacité, positionnez le refroidisseur d’air conformémentaux directives

suivantes:

IMPORTANTE: Le refroidisseur d’air par évaporation n’est pas un climatiseur, car il ne fonctionne pas

au moyen d’un compresseur ni de gaz frigorigène. Il ne faut pas s’attendre à ce qu’il rafraîchisse autant

qu’un climatiseur réfrigérant.

IMPORTANTE: Les modèles de refroidisseur d’air par évaporation de Honeywell sont conformes à la

norme IPX4, et il n’est pas recommandé de les laisser à l’extérieur en cas de fortes pluies ou de neige.

À l’extérieur (uniquement pour les modèles d’extérieur)

Utiliser uniquement avec des prises protégées par des disjoncteurs de fuite de terre.Appuyez sur le

bouton TEST, puis sur le bouton RESET une fois par mois pour assurer un bon fonctionnement.

Pour éviter qu’ils provoquent une chute, les cordons d’alimentation doivent être disposés de

manière sécuritaire.

Les ﬁls et les connexions doivent être protégés de l’eau. La prise électrique et les connexions du

refroidisseur d’air doivent être sèches tout le temps. Lorsqu'il est utilisé à l'extérieur, branchez la

ﬁche électrique dans une prise extérieur conforme à la norme IP44.

Placer l’appareil sur une surface plane et solide.

•

La page charge ...

Honeywell CL201AE Portable Evaporative Air Cooler Manuel utilisateur

Marque: Honeywell

Modèle: CL201AE Portable Evaporative Air Cooler

Catégorie: Humidificateurs

Taper: Manuel utilisateur

Télécharger le PDF

rapport

Honeywell CL201AE Portable Evaporative Air Cooler Manuel utilisateur

Honeywell CL201AE Portable Evaporative Air Cooler Manuel utilisateur

dans d''autres langues