Sony CDX-CA900 Manuel utilisateur

Operating Instructions

Mode d’emploi

Manual de instrucciones

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record these numbers in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. CDX-CA900X Serial No.

CDX-CA900X

For installation and connections, see the supplied installation/connections manual.

En ce qui concerne l’installation et les connexions, consulter le manuel

d’installation/raccordement fourni.

Para obtener información sobre la instalación y las conexiones, consulte el manual de

instalación/conexiones suministrado.

3-241-106-11 (1)

US

FR

ES

FM

/

AM

Compact Disc

Player

2

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy its various features

even more with:

• Optional CD/MD units (both changers and

players)*

1

.

• CD TEXT information (displayed when a CD

TEXT disc*

2

is played).

• Supplied controller accessories

Card remote commander RM-X112

Rotary commander RM-X6S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

The use of optical instruments with this product

will increase eye hazard.

CAUTION

THIS DEVICE COMPLIES WITH PART 15

OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO

CONDITIONS;

(1) THIS DEVICE MAY NOT CAUSE

HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

The “XM Ready” logo indicates that this product

will control a Sony XM tuner module (sold

separately).

Please see your nearest authorized Sony dealer

for details on the XM tuner module.

For instructions on XM tuner operation, please

refer to the XM tuner module’s included

instruction manual.

3

Table of Contents

Location of controls. . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes on discs . . . . . . . . . . . . . . . . . . . . . . . . 6

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7

Detaching the front panel . . . . . . . . . . . . . . . 8

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 9

CD Player

CD/MD Unit (optional)

Playing a disc. . . . . . . . . . . . . . . . . . . . . . . . . 9

Display items. . . . . . . . . . . . . . . . . . . . . . . . 10

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 11

Playing tracks in random order

— Shuffle Play . . . . . . . . . . . . . . . . . . . . 11

Labeling a CD

— Disc Memo*. . . . . . . . . . . . . . . . . . . . 12

Locating a disc by name

— List-up* . . . . . . . . . . . . . . . . . . . . . . . 13

* Functions available with optional CD/MD unit

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . 13

Receiving the stored stations. . . . . . . . . . . . 14

Storing only the desired stations . . . . . . . . . 14

Storing station names

— Station Memo. . . . . . . . . . . . . . . . . . . 15

Tuning in a station through a list

— List-up . . . . . . . . . . . . . . . . . . . . . . . . 15

Other Functions

Using the rotary commander. . . . . . . . . . . . 16

Adjusting the sound characteristics . . . . . . 17

Quickly attenuating the sound . . . . . . . . . . 17

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the equalizer (EQ7). . . . . . . . . . . . . 18

Setting the Dynamic Soundstage Organizer

(DSO). . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting the front and rear volume. . . . . . 20

Adjusting the volume of the

subwoofer(s). . . . . . . . . . . . . . . . . . . . . . 20

Selecting the spectrum analyzer (SA). . . . . 21

Connecting auxiliary audio equipment. . . . 21

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22

Removing the unit. . . . . . . . . . . . . . . . . . . . 24

Specifications . . . . . . . . . . . . . . . . . . . . . . . 25

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 26

Error displays/Messages. . . . . . . . . . . . . . . 27

4

Location of controls

Refer to the pages listed for details.

a SCRL button 10

b DSPL (display mode change) button

c Number buttons

(1) REP

(2) SHUF

To store stations/receive stored stations.

d DSO button 19

e MENU button

To display the menus.

f SOURCE (Power on/Radio/CD/MD*

1

/

AUX*

2

) button

To select the source.

g SEEK (</,) buttons

To skip tracks, fast-forward, reverse a track,

tune in stations automatically, find a station

manually, and select a setting.

h SOUND button 17, 20

i OFF (Stop/Power off) button 8, 9, 21

j VOL buttons (+/–)

To turn up or down the volume.

k MODE button

To change the operation.

l EQ7 button 18

m LIST button 13, 15

n DISC (M/m) buttons

To receive preset stations, change the disc*

3

,

skip albums*

4

, and select a menu.

o ENTER button

To enter a setting.

p ATT button 17

*1 When an optional MD unit is connected.

*2 Available only when an optional Sony portable

device connected to BUS AUDIO IN of the unit. You

cannot connect any optional CD/MD units at the

same time.

*3 When an optional CD/MD unit is connected.

*4 Available only when optional CD unit with the MP3

file control function is connected, and MP3 file is

played.

Card remote commander RM-X112

Tip

See “Replacing the lithium battery” on page 22 for details

on how to replace the batteries.

DISC

–

SOURCE

DISC

+

SEEK

+

SEEK

–

(SEEK)

(<):to select

leftwards/

.

(SEEK)

(,):to select

rightwards/

>

(DISC)

(M): to select upwards

In menu mode, the currently selectable button(s) of

these 4 are indicated with a “ v” in the display.

(DISC)

(m): to select downwards

DISC

–

ATTOFF

SCRL

DSPL

1

4

MODE

2

5

3

6

SOURCE

DISC

+

SEEK

+

SEEK

–

SOUND

ENTER

MENU

LIST

VOL

+

–

REP SHUF

EQ7DSO

5

a SOURCE button

b Receptor for the card remote

commander and rotary commander

c Z (eject) button (located on the front side

of the unit, behind the front panel) 9

d Display window

e OPEN button 8, 9

f RESET button (located on the front side of

the unit, behind the front panel) 7

g VOL (+/–) buttons

h OFF button*

* Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

(OFF) for 2 seconds to turn off the clock

display.

Otherwise, the clock display does not turn off

and this causes battery drain.

Note

If the unit is turned off by pressing (OFF) for 2

seconds, the unit cannot be operated with the

card remote commander or the rotary

commander unless (SOURCE) on the unit is

pressed or a disc is inserted to activate the unit.

Main unit

CDX-CA900X

OFF

VOL

SOURCE

6

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antennas will extend automatically

while the unit is operating.

• While driving, do not use the CUSTOM FILE

feature or any other functions which may divert

your attention from the road.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep the disc clean, do not touch the surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

Do not subject the discs to heat/high

temperature. Avoid leaving them in parked cars

or on dashboards/rear trays.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

– Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing a

disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm (3 in.) CDs.

7

• Before playing, clean the discs with a

commercially available cleaning cloth. Wipe

each disc from the center out. Do not use

solvents such as benzine, thinner, commercially

available cleaners, or antistatic spray intended

for analog discs.

Notes on CD-R/CD-RW discs

• You can play CD-Rs (recordable CDs)/CD-

RWs (rewritable CDs) designed for audio use

on this unit.

Look for these marks to distinguish CD-Rs/

CD-RWs for audio use.

These marks denote that a disc is not for audio

use.

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized*.

* A process necessary for a recorded CD-R/CD-RW

disc to be played on the audio CD player.

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ball-point

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

RESET button

8

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

CD/MD playback or radio reception stops

(the key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

2 Press (OPEN), then slide the front

panel to the right, and gently pull out

the left end of the front panel.

Notes

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• Do not drop or put excessive pressure on the front

panel and its display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel with you, use the

supplied front panel case.

Attaching the front panel

Place hole A of the front panel onto the spindle

B on the unit, then lightly push the left side in.

Press (SOURCE) on the unit (or insert a CD) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

1

2

A

B

x

9

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press M or m

repeatedly until “Clock” appears.

1 Press (ENTER).

The hour indication flashes.

2 Press M or m to set the hour.

3 Press ,.

The minute indication flashes.

4 Press M or m to set the minute.

2 Press (MENU) twice.

The clock starts. After the clock setting is

completed, the display returns to normal play

mode.

Tip

When D.Info mode is set to on, the time is always

displayed (page 17).

CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit, you

can also control external CD (MP3 playable CD)/

MD units. If you connect optional MP3 playable

CD units (eg., MP3 CD changer), you can play

MP3 files; compressed audio files (tracks) with

quality of sound.

Note

If you connect an optional CD (MP3 playable CD) unit

with the CD TEXT function, the CD TEXT information

will appear in the display when you play a CD TEXT

disc.

Playing a disc

(With this unit)

1 Press (OPEN) and insert the disc

(labeled side up).

2 Close the front panel.

Playback starts automatically.

If a disc is already inserted, press (SOURCE)

repeatedly until “CD” appears to start playback.

To Press

Stop playback (OFF)

Eject the disc (OPEN) then Z

Skip tracks

– Automatic

Music Sensor

(SEEK) (./>)

[once for each track]

Fast-forward/

reverse

– Manual Search

(SEEK) (m/M)

[hold to desired point]

continue to next page t

10

Notes

• While the first/last track on the disc is playing, if

< or , is pressed, playback skips to the last/first

track of the disc.

• When the last track on the disc is over, playback

restarts from the first track of the disc.

• With an optional unit connected, playback of the

same source will continue on to the optional CD/MD

unit.

(With optional unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*

1

).”

2 Press (MODE) repeatedly until the

desired unit appears.

Playback starts.

*1 MS: MG Memory Stick System-up Player MGS-X1

*2 Available only when an MP3 file is played.

Albums are folders of a CD containing MP3 files.

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” If “MS” appears in the source

display, MGS-X1 starts to play. If “MD” appears in

the source display, press (MODE) to select “MS,” to

start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

Notes when connecting MP3 playable CD unit(s)

• If a disc with no MP3 files (tracks) is inserted, “NO

Music” appears in the display and playback of the

next disc starts.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before playback begins. During this time, “Read” is

displayed. Please wait for play to start automatically

when the reading is complete.

Display items

When the disc/album/track changes, any

prerecorded title*

1

of the new disc/album/track is

automatically displayed (if the Auto Scroll

function is set to “on,” names exceeding 12

characters will be scrolled (page 17)).

*1 When pressing (DSPL), “NO Disc Name”, “NO

Album Name”, or “NO Track Name” indicates that

there is no disc name, album name, or track name

and “NO ID3 Tag” indicates that there is no ID3 tag.

*2 Available only when optional MD unit with the

MDLP function is connected, and an MDLP disc is

played.

*3 Available only when an MP3 file is played.

*4 If the disc has been labeled by this unit using the

CUSTOM FILE function, Disc Memo is displayed

preferentially.

*5 Only for CD TEXT discs with the artist name.

Notes

• Some characters cannot be displayed. Characters

and signs which cannot be displayed appear as “ *.”

• For some CD TEXT discs or ID3 tags with very

many characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc or an album.

Tip

When A.Scroll (Auto Scroll) is set to off and the disc/

album/track name is changed, the disc/album/track

name or ID3 tag does not scroll.

To Press

Skip discs

–Disc selection

(DISC) (+) or (DISC) (–)

[once for each disc]

Skip albums*

2

–Albums selection

(DISC) (+) or (DISC) (–)

[hold to desired point]

To Press

Switch display

item

(DSPL)

Scroll display item (SCRL)

Clock

Track number

Disc/Album*

3

number

Source

MDLP display*

2

LP2: LP2 playback

LP4: LP4 playback

Elapsed

playing time

Displayable items

• Disc name*

1

*

4

/Artist name*

5

• Track name*

1

• Album name*

1

*

3

•ID3 tag*

1

*

3

11

Playing tracks repeatedly

— Repeat Play

The disc in the main unit will repeat a track, the

entire album, or the entire disc when it reaches

the end. For repeat play, you can select:

•REP

····Track — to repeat a track.

•REP

····Album*

1

— to repeat an album.

•REP

·····Disc*

2

— to repeat a disc.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD/MD

units are connected.

During playback, press (1) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select

“REP

······off.”

Playing tracks in random

order

— Shuffle Play

You can select:

• SHUF

···Album*

1

— to play the MP3 files on

an album in the current optional CD unit with

the MP3 file control function in random order.

• SHUF

····Disc — to play the tracks on the

current disc in random order.

• SHUF

·Changer*

2

— to play the tracks in the

current optional CD (MD) unit in random

order.

• SHUF

·····All*

3

— to play all the tracks in all

the connected CD (MD) units (including this

unit) in random order.

*1 Available only when an MP3 file is played.

*2 Available only when one or more optional CD (MD)

units are connected.

*3 Available only when one or more optional CD units,

or two or more optional MD units are connected.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select

“SHUF

·····off.”

Note

“SHUF·····All” will not shuffle tracks between CD units

and MD units.

12

Labeling a CD

— Disc Memo (For a CD unit with the

CUSTOM FILE function)

You can label each disc with a custom name

(Disc Memo). You can enter up to 8 characters

for a disc. If you label a CD, you can locate the

disc by name (page 13).

1 Start playing the disc you want to label

in a CD unit with the CUSTOM FILE

function.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

The unit will repeat the disc during the

labeling procedure.

4 Enter the characters.

1 Press M or m repeatedly to select

the desired character.

A y B y C ... y 0 y 1 y 2 ...

y + y – y

*

... y *

1

y A

*1 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 Press (MENU) twice.

The unit returns to normal CD play mode.

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps 2

and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with a

CD unit that has the function. The Disc Memo will be

stored in the memory of the CD unit with the

CUSTOM FILE function.

Note

REP····Track/shuffle play is suspended until the Name

Edit is complete.

Viewing the Disc Memo

As a display item, the Disc Memo always takes

priority over any original CD TEXT information.

Tip

To find out about other items that can be displayed,

see page 10.

Erasing the Disc Memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the

CD unit storing the Disc Memo.

3 Press (MENU), then press M or m

repeatedly until “Name Delete”

appears.

4 Press (ENTER).

The stored names will appear.

5 Press M or m repeatedly to select the

disc name you want to erase.

The stored names will appear.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• When the Disc Memo for a CD TEXT disc is erased,

the original CD TEXT information is displayed.

• If you cannot find the Disc Memo you want to erase,

try selecting a different CD unit in step 2.

• If you have already erased all of the Disc Memo, the

unit returns to normal CD play mode in step 4.

To Press

View (DSPL) during CD/CD

TEXT disc playback

13

Locating a disc by name

— List-up (For a CD unit with the CD TEXT/

CUSTOM FILE function, or an MD unit)

You can use this function for discs that have been

assigned custom names*

1

or for CD TEXT

discs*

2

.

*1 Locating a disc by its custom name: when you

assign a name for a CD (page 12) or an MD.

*2 Locating discs by the CD TEXT information: when

you play a CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (LIST).

The name assigned to the current disc appears

in the display.

2 Press M or m repeatedly until you find

the desired disc.

3 Press (ENTER) to play the disc.

Note

Some letters cannot be displayed (exception: Disc

Memo).

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, AM1, and AM2).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

“TUNER.”

2 Press (MODE) repeatedly to select the

band.

3 Press (MENU), then press M or m

repeatedly until “BTM” appears.

4 Press (ENTER).

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

14

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

“TUNER.”

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

Tip

Press

M or m to receive the stations in the order they

are stored in the memory (Preset Search function).

If preset tuning does not work

Press < or , to search for the

station (automatic tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Tips

• If automatic tuning stops too frequently, turn on the

Local Seek to limit seek to stations with stronger

signals (see “Changing the sound and display

settings” on page 17).

• If you know the frequency of the station you want to

listen to, press and hold

< or , to locate the

approximate frequency, then press

< or ,

repeatedly to fine adjust to the desired frequency

(manual tuning).

If FM stereo reception is poor

Select monaural reception mode

(see “Changing the sound and display

settings” on page 17).

The sound improves, but becomes monaural

(“ST” disappears).

Note

If interference occurs, this unit will automatically

narrow the reception frequency to eliminate noise (IF

Auto function). In such cases, some FM stereo

broadcasts may become monaural while in the stereo

reception mode.

Tips

• To always hear FM stereo broadcasts in stereo, you

can change the IF Auto setting and widen the

frequency signal reception (see “Changing the

sound and display settings” on page 17). Note that

some interference may occur in this setting.

• If FM broadcasts are difficult to hear, set DSO to off

(page 19).

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

“TUNER.”

2 Press (MODE) repeatedly to select the

band.

3 Press < or , to tune in the station

that you want to store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears in the source display.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

15

Storing station names

— Station Memo

You can assign a name to each radio station and

store it in memory. The name of the station

currently tuned in appears in the display. You can

assign a name using up to 8 characters for a

station.

Storing the station names

1 Tune in a station whose name you

want to store.

2 Press (MENU), then press M or m

repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1 Press M or m repeatedly to select

the desired character.

A y B y C ... y 0 y 1 y 2 ...

y + y – y

*

... y *

1

y A

*1 (blank space)

2 Press , after locating the desired

character.

If you press <, you can move back to the

left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Tips

• Simply overwrite or enter “ ” to correct or erase a

name.

• There is another way to start storing station names:

Press (LIST) for 2 seconds instead of performing

steps 2 and 3. You can also complete the operation

by pressing (LIST) for 2 seconds instead of step 5.

Erasing the station name

1 During radio reception, press (MENU),

then press M or m repeatedly until

“Name Delete” appears.

2 Press (ENTER).

3 Press M or m repeatedly to select the

station whose name you want to

erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other

names.

5 Press (MENU) twice.

The unit returns to normal radio reception

mode.

Note

If you have already erased all of the station names, the

unit returns to normal radio reception mode in step 2.

Tuning in a station through a

list

— List-up

1 During radio reception, press (LIST)

momentarily.

The frequency or the name assigned to the

current station appears in the display.

2 Press M or m repeatedly until you find

the desired station.

If no name is assigned to the selected station,

the frequency appears in the display.

3 Press (ENTER) to tune in the desired

station.

16

Other Functions

You can also control the unit (and optional CD/

MD units) with a rotary commander.

Using the rotary commander

First, put a supplied lithium battery CR2032 in

the rotary commander.

See “Replacing the lithium battery” on page 22

and “Notes on lithium battery” on page 23, for

details about how to install the lithium battery.

a ATT button

Attenuate sound.

b OFF button*

1

Stop playback or radio reception.

c A VOL (volume) control

Rotate to adjust the volume.

B SOURCE control

Press to change the source.

(Radio/CD/MD*

2

/AUX*

3

)

C ./> control

Press to:

– tune in stations automatically.

– skip tracks on the disc.*

2

Press and hold to:

– find a station manually.

– fast-forward/reverse a track.

D DISC +/– control

Press to:

– receive preset stations.

– change the disc.*

2

Press and hold to:

– change the album.*

4

d MODE button

Change operation (Radio band/CD unit/

MD*

2

unit)

e Infrared emitter

The rotary commander emits infrared rays in

the direction of the dial setting.

f Infrared rays dial

Rotate the dial to change the direction of

infrared rays.

*1 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for

2 seconds to turn off the clock indication after

tuning off the ignition.

*2 Only if the corresponding optional equipment is

connected.

*3 Avilable only when an optional Sony portable

device connected to BUS AUDIO IN of the unit. You

cannot connect any optional CD/MD units at the

same time.

*4 Available only when optional CD unit with the MP3

file control function is connected, and an MP3 file is

played.

DISC

PUSH

SOURCE

+

-

mM

.>

1

AB

D

C

2

6

5

4

3

A

D

B

C

17

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, fader,

and subwoofer volume.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

Each time you press (SOUND), the item

changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)

2 Adjust the selected item by pressing

< or ,.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT).

“ATT·······on” appears in the display

momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

Changing the sound and

display settings

— Menu

The following items can be set:

(Set Up)

• Clock (page 9)

• Beep — to turn the beeps on or off.

• AUX-A (page 21) — to turn the AUX source

display on or off.

(Display)

• D.Info (Dual Information) — to display the

clock and the play mode at the same time (on).

• SA (Spectrum Analyzer) (page 21) — to

change the display pattern of the sound signal

level.

• Dimmer — to change the brightness of the

display.

– Select “Auto” to dim the display only when

you turn the lights on.

– Select “on” to dim the display.

– Select “off” to deactivate the Dimmer.

• Contrast — to adjust the contrast if the

indications on the display are not recognizable

because of the unit’s installation position.

• A.Scroll (Auto Scroll)

– Select “on” to scroll all automatically

displayed names exceeding 12 characters.

– When Auto scroll is set to off and the disc/

album/track is changed, the disc/album/track

name or ID3 tag does not scroll.

•Demo

– Select “on” to activate the Demo display.

The Demo display will appear about 10

seconds after the unit is turned off.

(Play Mode)

• Local on/off (Local seek mode) (page 14)

– Select “on” to only tune into stations with

stronger signals.

• Mono on/off (Monaural mode) (page 14)

– Select “on” to hear FM stereo broadcasts in

monaural. Select “off” to return to normal

mode.

• IF Auto/Wide (page 14)

continue to next page t

18

(Sound)

• EQ7 Tune (page 19) — to adjust the equalizer

curve.

• HPF (High pass filter) (page 20)

• LPF (Low pass filter) (page 20)

• Loudness — to enjoy bass and treble even at

low volumes. The bass and treble will be

reinforced.

• AUX Level (page 21) — to adjust the volume

level of connected auxiliary equipment.

1 Press (MENU).

To set A.Scroll, press (MENU) during CD/

MD playback.

2 Press M or m repeatedly until the

desired item appears.

3 Press < or , to select the desired

setting (Example: “on” or “off”).

4 Press (MENU).

After the mode setting is completed, the

display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories by pressing

M or m for 2 seconds.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music

types (Vocal, Club, Jazz, New Age, Rock,

Custom, Xplod, and off (equalizer off)).

You can store and adjust the equalizer settings

for frequency and level.

You can store the EQ7 setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a desired

source.

2 Press (EQ7) repeatedly until the

desired equalizer curve appears.

Each time you press (EQ7), the item

changes.

To cancel the equalizing effect, select “off.”

After 3 seconds, the display returns to the

normal playback mode.

19

Adjusting the equalizer curve

1 Press (MENU).

2 Press M or m repeatedly until “EQ7

Tune” appears, then press (ENTER).

3 Press < or , to select the desired

equalizer curve, then press (ENTER).

Each time you press < or ,, the item

changes.

4 Select the desired frequency and level.

1 Press < or , to select the desired

frequency.

Each time you press < or ,, the

frequency changes.

62Hz y 157Hz y 396Hz y 1.0kHz

y 2.5kHz y 6.3kHz y 16kHz

2 Press M or m to adjust the desired

volume level.

The volume level is adjustable in 1 dB

steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,

press (ENTER) for 2 seconds.

5 Press (MENU) twice.

After the effect setting is complete, the

display returns to normal playback mode.

Setting the Dynamic

Soundstage Organizer (DSO)

If your speakers are installed into the lower part

of the doors, the sound will come from below

and may not be clear.

The DSO (Dynamic Soundstage Organizer)

function creates a more ambient sound as if there

were speakers above the dashboard (virtual

speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*1 DSO 1

*2 DSO 2

*3 DSO 3

*4 DSO OFF

1 Press (SOURCE) to select a desired

source.

2 Press (DSO) repeatedly until the

desired DSO setting appears.

Each time you press (DSO), the DSO setting

changes “DSO········1-3”, and “off.”

To cancel the DSO function, select

“DSO······off.” After 3 seconds, the display

returns to the normal playback mode.

Notes

• Depending on the type of car interior or type of

music, DSO may not have a desirable affect.

• If FM broadcasts are difficult to hear, set DSO to off.

*1

*4

*3

*2

*3

*2

*4

20

Adjusting the front and rear

volume

1 Press (SOURCE) to select a desired

source.

2 Press (SOUND) repeatedly until “FAD”

appears.

3 Press < or , repeatedly to adjust

the volume of front/rear speakers.

After 3 seconds, the display returns to the

normal playback mode.

Adjusting the cut-off frequency for the

front/rear speakers

To match the characteristics of the installed

speaker system, you can select the cut-off

frequency of the speakers.

1 During playback or radio reception,

press (MENU).

2 Press M or m repeatedly until “HPF”

appears.

3 Press < or , to select the cut-off

frequency.

Each time you press < or ,, the frequency

changes as follows:

off (default setting) y 78Hz y 125Hz

4 Press (MENU).

After the frequency setting is complete, the

display returns to normal playback mode.

Adjusting the volume of the

subwoofer(s)

1 Press (SOURCE) to select a desired

source.

2 Press (SOUND) repeatedly until “SUB”

appears.

3 < or , repeatedly to adjust the

volume.

After 3 seconds, the display returns to the

normal playback mode.

Tip

The volume level is adjustable from –10 dB to +10 dB.

(Below –10 dB, “–∞ dB” is displayed.)

Adjusting the cut-off frequency for the

subwoofer(s)

To match the characteristics of the connected

subwoofer(s), you can cut out the unwanted high

and middle frequency signals entering the

subwoofer(s). By setting the cut-off frequency

(see the diagram below), the subwoofer(s) will

output only low frequency signals so you can get

a clearer sound image.

1 During playback or radio reception,

press (MENU).

2 Press M or m repeatedly until “LPF”

appears.

Cut-off frequency

Frequency (Hz)

Level

off

Cut-off frequency

Frequency (Hz)

Level

off

La page charge ...

Sony CDX-CA900 Manuel utilisateur

Ce manuel convient également à

Sony CDX-CA900 Manuel utilisateur

dans d''autres langues

Documents connexes