Safety

Instructions

EasyCoder® PD41

Printer

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Ave. W.

Everett, WA 98203

U.S.A.

change without prior notice and do not represent a commitment on the

part of Intermec Technologies Corporation.

© 2005 by Intermec Technologies Corporation. All rights reserved.

e word Intermec, EasyCoder, and the Intermec logo are either

trademarks or registered trademarks of Intermec Technologies

Corporation.

roughout this manual, trademarked names may be used. Rather than

put a trademark (™ or ®) symbol in every occurrence of a trademarked

name, we state that we are using the names only in an editorial fashion,

and to the benefit of the trademark owner, with no intention of infringe-

is equipment generates, uses, and can radiate radio frequency energy

and if not installed and used in accordance with the instructions manual,

may cause interference to radio communications. It has been tested and

found to comply with the limits for a Class A computing device pursu-

ant to Subpart J of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference when operated in a com-

mercial environment. Operation of this equipment in a residential area

is likely to cause interference in which case the user at his own expense

will be required to take whatever measures may be required to correct the

interference.

Ministère des Communications du Canada

CONFORMITE DE REGLEMENTS (DOC-A)

Le présent appareil numérique n’émet pas de bruits radio-électriques

dépassant les limites applicables aux appareils numériques de classe A

prescrites dans le règlement sur brouillage radioélectrique édicté par le

Ministère des Communications du Canada.

EU Standard EN 55022 (The European Union)

WARNING

is is a Class A ITE product. In a domestic environment this product

may cause radio interference in which case the user may be required to

Safety Warnings

• Read and review the warnings in this manual carefully before

• Place the printer on an even surface which can support its weight of

• Do not spray the printer with water. If you are using a hose to clean

• Carefully read the warning text on the envelope before using a

Product Identification

e machine labels are attached to the printer’s rear plate and contain