Intermec EasyCoder PF8 Manuel utilisateur
- Taper
- Manuel utilisateur
PF8d/PF8t Printer Compliance Insert
For Users in the United States and Canada
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation.
L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec
Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu’a l’usager d’utiliser l’équipement.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
Canadian Digital Apparatus Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
For Users Outside of the United States or Canada
CE Marking: Refer to the Declaration of Conformity for a list of the EU Directives and Standards that this product complies with.
对于美国或加拿大以外的用户
Note: This equipment may be used on an IT power system.
Caution: This marking indicates that the user should read all included documentation before use.
Caution: For power supply, use Intermec Model 1-092363-00. No user-serviceable parts.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Attention: Pour la source d’alimentation, utilisez Intermec modèle 1-092363-00. Il ne contient aucune pièce réparable par
l’utilisateur.
Note: Place this supplement in your manual.
Caution: This marking indicates that the user should read all included documentation before use.
Caution: For power supply use Intermec Model 1-092363-00. No user-serviceable parts.
警告 : 该标志表明，用户应在使用前通读所有随附的文档。
警告：为提供电源，可使用 Intermec
1-092363-00 型号的产品。没有可供用户维修的零部件。
S&E
XXXXXX
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
CE-Kennzeichnung: Die Konformitätserklärung enthält eine Liste der EU-Richtlinien und Normen, denen das Produkt entspricht.
미국 및 캐나다 이외의 거주자의 경우
Para usuários fora do Canadá ou dos Estados Unidos
Marcas CE: Consulte na Declaração de Conformidade a lista de Diretivas e Normas da União Européia com as quais este produto está em
conformidade.
Для пользователей вне Соединенных Штатов или Канады
Para usuarios fuera de Canada o de los Estados Unidos
Marcas de la CE: Remítase a la Declaración de Conformidad para ver una lista de las Directrices y Estándares de la UE con los cuales cumple
este producto.
PF8d/PF8t Printer Compliance Insert
*933-103-002*
P/N 933-103-002
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.
Vorsicht: Als Netzteil Intermec Modell 1-092363-00 verwenden. Enthält keine Teile, die vom Benutzer gewartet werden
können.
주의 : 이 표시는 제품 사용 전에 모든 설명서 내용을 읽어야 한다는 것을 나타냅니다 .
주의 : 전력 공급 시 , 인터멕 1-092363-00 모델 사용 . 사용자 조작 사용 부품 아님 .
기종별 사용자안내문
A급 기기
( 업무용 )
이 기기는 업무용으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이 점을 주의하시기 바라며
만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기 바랍니다 .
Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso.
Cuidado: Use o modelo 1-092363-00 da Intermec para a fonte de alimentação. Este equipamento não contém peças que
possam ser reparadas pelo usuário.
Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию,
прежде чем начинать работу.
Осторожно: Для питания используйте модель Intermec
1-092363-00. Детали, обслуживаемые пользователем,
отсутствуют.
Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.
Precaución: Para la fuente de alimentación, use el Modelo 1-092363-00 de Intermec. No hay piezas a las cuales pueda dar
servicio el usuario.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2007 Intermec Technologies
Corporation. All rights reserved.
-
1
-
2
Intermec EasyCoder PF8 Manuel utilisateur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Intermec EasyCoder PF8 User manual
- Deutsch: Intermec EasyCoder PF8 Benutzerhandbuch
Documents connexes
-
Intermec AD10 Supplementary Manual
-
-
-
Intermec PB50 Supplementary Manual
-
-
-
-
-
-