Sony CSS-HD2 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Cyber-shot Station
CSS-HD2
Operating Instructions
GB
FR
Mode d’emploi
ES
CT
CS
KR
Manual de instrucciones
使用説明書
▖⮓☎Ὧ☆
使用说明书
Cyber-shot Station
Cyber-shot 多功能底座
2-GB
English 
Before operating the product, please read this manual thoroughly and retain it for future reference.
WARNING 
To reduce fire or shock hazard, do not expose the unit to rain or 
moisture.
This symbol is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
3-GB
IMPORTANT SAFEGUARDS
For your protection, please read these safety instructions completely before operating the appliance, and
keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the
appliance, or the one described in the operating instructions and adhere to them.
Use
Power Sources
This set should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of electrical power supplied to your home, consult your dealer or local power company. For
those sets designed to operate from battery power, or other sources, refer to the operating instructions.
Polarization
This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
have a suitable outlet installed.
Do not defeat the safety purpose of the polarized plug by forcing it in.
Overloading
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can
result in fire or electric shock.
Object and Liquid Entry
Never push objects of any kind into the set through openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.
Attachments
Do not use attachments not recommended by the manufacturer, as they may cause hazards.
Cleaning
Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol
cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.
Installation
Water and Moisture
Do not use power-line operated sets near water − for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
Power-Cord Protection
Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.
Accessories
Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious
injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table
recommended by the manufacturer.
Ventilation
The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of
the set, and to protect it from overheating, these slots and openings must never be blocked or covered.
Never cover the slots and openings with a cloth or other materials.
Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface.
Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is
provided.
Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.
4-GB
Lightning
For added protection for this set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the set due to lightning and power-line surges.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
When the power cord or plug is damaged or frayed.
If liquid has been spilled or objects have fallen into the set.
If the set has been exposed to rain or water.
If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.
If the set does not operate normally when following the operating instructions. Adjust only those controls
that are specified in the operating instructions. Improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the set to normal operation.
When the set exhibits a distinct change in performance − this indicates a need for service.
Servicing
Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards.
Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check
Upon completion of any service or repairs to the set, as the service technician to perform routine safety
checks (as specified by the manufacturer) to determine that the set is in safe operating condition.
For Customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your
authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
5-GB
Notice on the supplied AC Adaptor for customers in the United  
Kingdom
A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and
approved by ASTA or BSI to BS1362, (i.e., marked with or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you
change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact
your nearest Sony service station.
 For Customers in Europe
This product has been tested and found compliant with the limits sets out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic field at the specific frequencies may influence the picture and sound of this unit.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in
separate service or guarantee documents.
Disposal of Old Electrical & Electronic Equipment (Applicable in 
the European Union and other European countries with separate 
collection systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed information
about recycling of this product, please contact your local Civic Office, your
household waste disposal service or the shop where you purchased the product.
6-GB
Disposal of waste batteries (applicable in the European Union and 
other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with
this product shall not be treated as household waste.
By ensuring these batteries are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human health which could otherwise be
caused by inappropriate waste handling of the battery. The recycling of the materials will
help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will be treated properly, hand over
the product at end-of-life to the applicable collection point for the recycling of electrical
and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the
product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact
your local Civic Office, your household waste disposal service or the shop where you
purchased the product.
7-GB
Table of contents
Notes on using the Cyber-shot Station ............................................................................................8
Features ................................................................................................................................................ 9
Trademarks ..........................................................................................................................................9
Identifying the parts .........................................................................................................................10
Set up ..................................................................................................................................................12
Placing the camera on the Cyber-shot Station ............................................................................14
Removing the camera from the Cyber-shot Station ...................................................................14
Charging the battery pack ..............................................................................................................14
Viewing images on a TV screen ....................................................................................................15
Remote Commander functions ......................................................................................................16
Care and maintenance .....................................................................................................................17
Changing the battery of the Remote Commander .......................................................................17
Troubleshooting ................................................................................................................................18
Specifications ....................................................................................................................................19
8-GB
Notes on using the Cyber-shot Station
Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
The CSS-HD2 can be used with the DSC-T300/T75/T70/T2/W300/W170/W150/W130/W125/W120/W115/
W110 digital still cameras. Not all of the above models are available in all countries and regions.
About the station plates
The Cyber-shot Station is supplied with 5 station plates that are
compatible with various digital cameras (hereinafter referred to as the
camera”). See page 12 for further details.
Be sure to set the correct station plate that is compatible with your camera
before using. If you set the wrong station plate, the I/O unit could be
damaged.
The illustration in this manual shows the combination of DSC-T300 and
station plate for DSC-T300.
Precautions on use and storage locations:
Do not use or keep the Cyber-shot Station in locations subject to the following conditions. Otherwise, the
Cyber-shot Station could malfunction.
Locations subject to extreme high temperature
Temperatures in a hot sun or closed automobiles during summer may be extremely high, causing
deformation or malfunction of the Cyber-shot Station.
Locations under direct sunlight or near heaters
This may cause deformation or a malfunction of the Cyber-shot Station.
Locations subject to vibration
Locations subject to strong magnetism
Locations subject to dust particles in a sandy place or the beach
Precautions on use: 
Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long
as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately
shut off the power by disconnecting the plug from the wall outlet (wall socket).
Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product,
unplug the AC Adaptor to cut off the power source.
The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet,
even if the set itself has been turned off.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images
may not be played back properly.
Avoid other metallic objects from coming in contact with the connecting parts of the Cyber-shot Station
and the power cord. It may cause a short circuit.
Precautions on recorded data:
Please note that Sony will not be liable for recorded data such as images and audio data if you cannot record
or play back due to a malfunction of the camera, recording media, or the Cyber-shot Station.
9-GB
Features
When you place a camera on the Cyber-shot Station, you can use the Cyber-shot Station in the following way.
You can view the images of the camera in high definition by connecting the Cyber-shot Station to a high
definition TV. Images can be viewed in standard definition on a normal TV.
You can easily view images on a TV screen with the wireless Remote Commander.
Using the Remote Commander, you can operate the followings:
Viewing images
Slide Show
Playback zoom
Display the images in index display and switch the way to display images to “Folder,” “Date View,” or
“Favorites” (except for DSC-T75/T70/T2/W130/W125/W120/W115/W110).
Display the images in index display and search for the image by “All people,” “Children,” “Smiles,” or
“Infants” (except for DSC-T75/T70/T2/W130/W125/W120/W115/W110).
The Cyber-shot Station can charge the battery pack inside the camera faster than the battery charger
supplied with the camera when you simply place the camera on it.
Trademarks
and “Cyber-shot Station” are trademarks of Sony Corporation.
In addition, system and product names used in this manual are, in general, trademarks or registered
trademarks of their respective developers or manufacturers. However, the
or
marks are not used in all
cases in this manual.
10-GB
Identifying the parts
Cyber-shot Station
I/O unit
Protection cover
Detach this cover
before use.
Positioning marker
POWER lamp
CHARGE lamp
Camera front guide
Remote sensor
HD OUTPUT lamp
DC IN jack
AV OUT jack
Station plate
Camera side guide
Positioning marker B
Positioning marker A
The Cyber-shot Station is supplied with 5 station plates. Be sure to attach the correct station plate before
use.
See page 12 for further details.
11-GB
Remote Commander
The functions of the Remote Commander differ depending on the camera you use.
When using DSC-T75/T70/T2, the Remote Commander of the Cyber-shot Station functions the same as the
Remote Commander of CSS-HD1, except for the functions of the (Slide Show) button and the control
buttons.
Also, some buttons do not function at all. For further information on the functions of the control buttons,
refer to the operating instructions supplied with the camera.
Control buttons 
(//// )
VIEW MODE button 
*1
FACE button 
*1
W ZOOM button 
*2
 (Slide Show) button
MENU button
HD/SD button
*2
V UP button/
V DOWN button 
*2
POWER button (CAMERA)
Playback Zoom ( ) button
Playback Zoom ( )/  
Index( ) button
HOME button 
*2
*1 These functions are not supported for DSC-T75/T70/T2/W130/W125/W120/W115/W110.
*2 These functions are not supported for DSC-T75/T70/T2.
12-GB
Using a right-sliding station plate (such as 
HD2-A)
Using a left-sliding station plate (such as 
HD2-B)
Hold the Cyber-shot Station with one hand.
Hold the camera side guide of the station
plate with the other hand and slide the station
plate until it is pushed in all the way.
See the table in step 1 for the sliding direction.
Sliding to the right
Sliding to the left
Set up
Preparing the Cyber-shot Station
1  Select a station plate.
The station plates have a front side and bottom
side.
Front side
Sony logo
Bottom side
Plate name
Select the station plate corresponding with your
camera.
Model name Plate name Sliding 
direction
DSC-T300 HD2-A Right
DSC-W110
HD2-B Left
DSC-W115
DSC-W120
DSC-W125
DSC-W130
DSC-W150
HD2-C Left
DSC-W170
DSC-W300 HD2-D Left
DSC-T2
HD2-E RightDSC-T70
DSC-T75
2 Attach the station plate.
Hold the station plate on the front side (the
side with the Sony logo) facing you, and place
it on the I/O unit of the Cyber-shot Station
as if you place it over the protection cover
attached on the I/O unit.
13-GB
The station plate will sink in when it is slid all
the way to the correct position. You will hear
a click when the plate is attached properly.
If the station plate does not sink in properly,
evenly push down on its left/right sides.
The positioning marker A on the station plate
and positioning marker on the Cyber-shot
Station will be aligned.
Detach the protection cover of the I/O unit.
Before you place a camera on the Cyber-shot
Station, be sure to detach the protection cover.
Detaching the station plate
Hold the Cyber-shot Station with one hand. Hold
the camera side guide of the station plate with the
other hand and pull the station plate upward.
3  Connect the supplied AC Adaptor to the DC 
IN jack of the Cyber-shot Station.
The POWER lamp of the Cyber-shot Station
lights up.
Cyber-shot Station
DC plug
AC Adaptor
To a wall 
outlet 
(wall socket)
AC Power cord 
(mains lead)
To use your Cyber-shot Station abroad 
– Power sources
You can use the Cyber-shot Station and the AC
Adaptor (supplied) in any country or region where
the power supply is within 100 V to 240 V AC
50/60 Hz.
Use a commercially available AC plug adaptor,
if necessary, depending on the design of the wall
outlet (wall socket).
AC plug adaptor
(not supplied)
Do not use an electronic transformer (travel 
converter), as this may cause a malfunction.
Preparing the Remote Commander
Notes on the Remote Commander
The Remote Commander is powered by a button
type lithium battery (CR2025) installed at the
factory. An insulation sheet is inserted to avoid
the battery exhaustion. Remove the insulation
sheet before using the Remote Commander for
the first time.
Insulation sheet
Point the remote sensor of the Cyber-shot Station
away from strong light sources such as direct
sunlight or overhead lightings. Otherwise, the
Remote Commander may not function properly.
14-GB
The Remote Commander range is less than
five meters (for indoor use). Point the Remote
Commander at the remote sensor of the Cyber-
shot Station. Try adjusting the angle of the
Remote Commander if you cannot operate the
Cyber-shot Station.
Placing the camera on the 
Cyber-shot Station 
Remove the Adaptor ring, the Conversion lens, 
etc. from the camera.
Attach the camera as shown below.
Be sure to turn off the camera before placing it on
the Cyber-shot Station.
When attaching the camera, make sure to insert
the camera straight down.
Tips
Make sure that the camera is securely attached to
the Cyber-shot Station.
Removing the camera from 
the Cyber-shot Station 
Hold the Cyber-shot Station down when you
remove the camera from the Cyber-shot Station.
Notes
When removing the camera, make sure to lift the
camera straight up. It may damage the camera or
the Cyber-shot Station when some extra force is
added to the front or the sides.
Charging the battery pack 
Place the camera with the battery pack 
inserted on the Cyber-shot Station.
Charging starts automatically. The CHARGE lamp
of the Cyber-shot Station lights up.
When the camera is turned on, the Cyber-shot
Station cannot charge the battery pack.
When the charging reaches to Normal charge*,
the CHARGE lamp goes off.
Recording and playback time with Normal
charge
is
approximately
90% of Full
charge.
For the time of the full charge for a completely
discharged battery at the temperature of 25 °C
(77 °F), see the table below.
DSC-T300/T75/T70/T2 Approx.
160 minutes
DSC-
W300/W170/W150//W130/
W125/W120/W115/W110
Approx.
230 minutes
It may take longer to charge, depending on the
charging condition and environment.
*
15-GB
Viewing images on TVs other than high-
definition TV
Connect the A/V OUT jack of the Cyber-shot
Station and the audio/video input jacks of the
TV.
A/V connecting cable
Red
White
Yellow
Audio
Video
Turn off the TV before connecting the Cyber-
shot Station and TV with the Component
A/V Cable.
The signal format to be output from the A/V
OUT jack depends on the camera setting.
To view the 1080i format images, you need a
TV compatible with 1080i format.
The audio to be output from the Cyber-shot
Station via the A/V OUT jack is monaural.
The Cyber-shot Station is not compatible with
the S-VIDEO connecting cable.
2 Turn on the power by pressing the 
(playback) button of the camera or the 
POWER button on the Remote Commander.
Tips
The buttons on the camera or the Remote
Commander may not function immediately
after the camera is attached to the Cyber-
shot Station. This occurs when the camera is
booting up and is not a malfunction. Wait for
about 10 seconds.
3 Turn on the TV and set the input switch to 
the input connected in step 1.
4 Press / on the Control buttons of the 
Remote Commander to select the image.
You can also select the image by pressing /
on the Control buttons of the camera.
The Cyber-shot Station is compatible with both
NTSC and PAL TV systems. For further details,
see the operating instructions supplied with the
camera.
Notes
After attaching the camera to the Cyber-shot
Station, the CHARGE lamp may blink slowly for
3 to 10 seconds. This indicates communication
between the camera and the Cyber-shot Station,
and it is not a malfunction.
If CHARGE lamp does not light or blinks for
more than 10 seconds, refer to “Troubleshooting.
Charging temperature
The temperature range for charging is 0 °C to
40 °C (32 °F to 104 °F). However, to provide
maximum battery efficiency, the recommended
temperature range when charging is 10 °C to
30 °C (50 °F to 86 °F).
On battery life
The battery life is limited. Battery capacity
decreases little by little as you use it more and
more, and as time passes. If the battery operating
time seems shortened considerably, a probable
cause is that the battery pack has reached the end
of its life. Buy a new battery pack.
The battery life varies according to how it
is stored and the operating conditions and
environment in which each battery pack is used.
Viewing images on a TV 
screen 
You can playback images by connecting the Cyber-
shot Station to the TV with the A/V connecting
cable (supplied) or the Component A/V Cable
(supplied).
Refer to the operating instructions supplied with
the TV for connection.
1 Viewing images on a high-definition TV
Connect the A/V OUT jack of the Cyber-shot
Station and the Component AV jacks of the TV.
Component A/V Cable
Red
White
Audio
Green
Blue
Red
Y
Pb/Cb
Pr/Cr
16-GB
Remote Commander 
functions
The functions of the Remote Commander differ
depending on the camera you use.
For further information, refer to the operating
instructions supplied with the camera.
Slide show
You can play back a series of still images recorded
with your camera by only pressing the (Slide
Show) button on the Remote Commander.
1 Turn on the power of the camera by 
pressing the 
 (playback) button of 
the camera or the POWER button on the 
Remote Commander.
2 Press the   (Slide Show) button on the 
Remote Commander.
The Slide Show settings screen appears.
The Slide Show settings screen may not be
displayed on some models even if you press
the (Slide Show) button. The Slide Show
will start in the preset conditions. For further
details about the setting method, refer to
the operating instructions supplied with the
camera.
3 Use the control buttons on the Remote 
Commander to change the settings of the 
Slide Show.
4 Use the control buttons on the Remote 
Commander to select [OK] and press the 
center 
 button or press the   (Slide 
Show) button on the Remote Commander.
To cancel Slide Show
Press the (Slide Show) button on the Remote
Commander again.
For further information, refer to the operating
instructions supplied with the camera.
Switching the view mode
You can change the index display by pressing the
VIEW MODE button on the Remote Commander.
Except for DSC-T75/T70/T2/W130/W125/W120/
W115/W110.
1 Turn on the power of the camera by 
pressing the 
 (playback) button of 
the camera or the POWER button on the 
Remote Commander.
2 Press the VIEW MODE button on the 
Remote Commander.
The view mode screen appears.
3 Use the control buttons on the Remote 
Commander to select the desired view 
mode and press the center 
 button.
The images are displayed in index mode using
the view mode you just selected.
When you press the V UP button and V DOWN
button on the Remote Commander, you can
perform the following functions in each view
mode.
Date View mode:
Display the previous date and next date.
Folder mode:
Display the previous folder and next folder.
Favorites mode:
Display the previous page and next page.
Filter by Faces
You can search the images recorded with various
faces by pressing the FACE button on the Remote
Commander.
Except for DSC-T75/T70/T2/W130/W125/W120/
W115/W110.
1 Turn on the power of the camera by 
pressing the 
 (playback) button of 
the camera or the POWER button on the 
Remote Commander.
2 Press the FACE button on the Remote 
Commander.
The Search images menu appears.
17-GB
3 Use the control buttons on the Remote 
Commander to select the search condition 
and press the center 
 button.
The images are displayed in index mode in
accordance with the search condition.
For further information, refer to the operating
instructions supplied with the camera.
Switching between HD and SD
You can switch the TV display between high-
definition video (HD) and other than high-
definition video (SD) by pressing the HD/SD button
on the Remote Commander.
Except for DSC-T75/T70/T2.
1 Turn on the power of the camera by 
pressing the 
 (playback) button of 
the camera or the POWER button on the 
Remote Commander.
2 Press the HD/SD button on the Remote 
Commander.
Every time you press the HD/SD button, the
setting will change alternately between HD and
SD.
The HD-OUTPUT lamp (blue) of the Cyber-shot
Station lights up while the HD video is viewed
on a TV.
For further information, refer to the operating
instructions supplied with the camera.
Wide Zoom Display
You can display a still image with an angle of view of
4:3 or 3:2 to those of 16:9 by pressing the W ZOOM
button on the Remote Commander, which is the
same as the wide zoom function of the camera.
For DSC-T75/T70, the Wide Zoom functions
when you press the
button on the Remote
Commander.
Except for DSC-T2.
1 Turn on the power of the camera by 
pressing the 
 (playback) button of 
the camera or the POWER button on the 
Remote Commander.
2 Press the W ZOOM button on the Remote 
Commander.
Every time you press the W ZOOM button, the
setting will change alternately between Wide
Zoom and Normal modes.
The Wide Zoom mode is canceled when you turn
off the camera or the shooting mode is switched.
Some functions of the Remote Commander will
be unavailable when you are using the Wide
Zoom function.
For further information, refer to the operating
instructions supplied with the camera.
Care and maintenance
Clean the Cyber-shot Station with a soft cloth
slightly moistened with water or tepid water, and
wipe the surface with a dry cloth. Do not use any
type of solvent such as thinner, alcohol or benzine
as this may damage the surface.
Changing the battery of the 
Remote Commander
WARNING 
Battery may explode if mistreated. Do not recharge,
disassemble, or dispose of in fire.
When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery. Use
of another battery may present a risk of fire or
explosion.
For the State of California, USA only
Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
CAUTION
Replace the battery with the specified type only.
Otherwise, fire or injury may result.
Replacing the button type lithium 
battery
Do not use any batteries other than CR2025.
Pull out the battery holder while pushing the
tab on the holder.
Put a new battery into the holder with its +
side facing upward.
Insert the holder into the Remote
Commander until it clicks.
tab
*
18-GB
Troubleshooting
If any problems occur with your products, refer to the following solutions.
If the problem persists, contact your Sony dealer.
Symptom  Cause/Solution
Unable to charge the battery pack or the
CHARGE lamp fails to light.
The camera is turned on.
Turn the camera off.
The AC Adaptor is disconnected.
Connect the AC Adaptor properly.
The camera is not placed on the Cyber-shot Station correctly.
Place the camera correctly.
The battery pack is not installed correctly.
Install the battery pack correctly.
The battery pack is completely charged.
The battery pack installed into the camera is inapplicable.
Install the battery pack compatible with your camera.
The CHARGE lamp blinks fast, or blinks
for more than 10 seconds.
The battery pack installed into the camera is inapplicable.
Install the battery pack compatible with your camera.
The connection is not correct. The camera is not placed
correctly on the Cyber-shot Station.
Remove the camera from the Cyber-shot Station and
reconnect the AC Adaptor. After the CHARGE lamp goes
off, place the camera on the Cyber-shot Station.
Unable to turn on the camera, or
it suddenly gets turned off.
The camera is not placed on the Cyber-shot Station correctly.
Place the camera correctly.
The AC Adaptor is disconnected.
Connect the AC Adaptor properly.
The images cannot be played back on
a TV.
The HD output setting is incorrect.
Refer to the operating instructions supplied with the
camera, and set the HD output setting correctly.
The Component A/V Cable or A/V connecting cable from the
Cyber-shot Station is not connected properly to the TV.
Connect the cable properly or correct the setting.
Buttons on the Remote Commander
do not work, and no operations can be
performed.
The camera is not placed correctly on the Cyber-shot Station.
Place the camera correctly.
The AC Adaptor is disconnected.
Connect the AC Adaptor properly.
The battery in the Remote Commander is dead.
Replace the battery with a new one.
Unable to attach the camera on the
Cyber-shot Station or the camera is
unstable.
The station plate is not attached properly.
Confirm that the station plate is compatible with your
camera and attach it properly.
19-GB
Specifications
Cyber-shot Station
Input/Output connectors
A/V OUT jack:
Component, Video/audio output
connector
DC IN jack
I/O unit
General
Dimensions (Approx.):
124 × 48 × 78 mm
(5 × 1 15/16 × 3 1/8 in.)
(w/h/d)
Mass (Approx.): 110 g (3.9 oz.)
(including a station plate)
Operating temperature:
0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature:
–20 °C to +60 °C
(–4 °F to +140 °F)
AC Adaptor
Input rating: 100 V to 240 V, AC 50/60 Hz,
11 W
Output rating: 4.2 V DC
See the label on the AC Adaptor
for other specifications.
Dimensions (Approx.):
48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 inches)
(w/h/d, excluding projecting
parts)
Mass (Approx.): 130 g (5 oz)
(excluding AC Power cord)
Operating temperature:
0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature:
–20 °C to +60 °C
(–4 °F to +140 °F)
Included items
Cyber-shot Station (CSS-HD2) (1)
Wireless Remote Commander (RMT-CSS6) 
(A button type lithium battery installed) (1)
Station plate (5)
A/V connecting cable (1)
Component A/V Cable (1)
AC Adaptor (AC-LS5) (1)
AC Power cord (mains lead) (1)
Protection cover (1)
Set of printed documentation
Design and specifications are subject to change
without notice.
2-FR
Français
Avant d’utiliser cet appareil, lisez attentivement ce mode d’emploi et conservez-le pour toute référence
ultérieure.
AVERTISSEMENT
Afin de réduire les risques d’incendie ou de décharge électrique,
nexposez pas cet appareil à la pluie ou à l’humidité.
Note pour les clients européens
Cet appareil a été testé et jugé conforme aux limites établies par la directive EMC visant l’utilisation de câbles
de connexion de moins de 3 mètres.
Attention
Le champ électromagnétique à des fréquences particulières peut avoir une incidence sur l’image et le son de
cet appareil.
Avis aux consommateurs des pays appliquant les Directives UE
Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japon. Le
représentant agréé pour la compatibilité électromagnétique et la sécurité du produit est Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question relative à la garantie ou aux
réparations, reportezvous à ladresse que vous trouverez dans les documents ci-joints, relatifs à la garantie et
aux réparations.
Traitement des appareils électriques et électroniques en fin de vie
(Applicable dans les pays de l’Union Européenne et aux autres pays
européens disposant de systèmes de collecte sélective)
Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit
ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de
collecte approprié pour le recyclage des équipements électriques et électroniques. En
s'assurant que ce produit est bien mis au rebut de manière appropriée, vous aiderez
à prévenir lesconquences négatives potentielles pour l'environnement et la san
humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour
toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez
contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le
produit.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Sony CSS-HD2 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues