Sony CSS-HD2 Le manuel du propriétaire

Cyber-shot Station

CSS-HD2

Operating Instructions

GB

FR

Mode d’emploi

ES

CT

CS

KR

Manual de instrucciones

使用説明書

▖⮓☎Ὧ☆

使用说明书

Cyber-shot Station

Cyber-shot 多功能底座

2-GB

English

Before operating the product, please read this manual thoroughly and retain it for future reference.

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or

moisture.

This symbol is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

3-GB

IMPORTANT SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and

keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the

appliance, or the one described in the operating instructions and adhere to them.

Use

Power Sources

This set should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of electrical power supplied to your home, consult your dealer or local power company. For

those sets designed to operate from battery power, or other sources, refer to the operating instructions.

Polarization

This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to

have a suitable outlet installed.

Do not defeat the safety purpose of the polarized plug by forcing it in.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can

result in fire or electric shock.

Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol

cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Installation

Water and Moisture

Do not use power-line operated sets near water − for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool, etc.

Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them,

paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious

injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table

recommended by the manufacturer.

Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of

the set, and to protect it from overheating, these slots and openings must never be blocked or covered.

Never cover the slots and openings with a cloth or other materials.

Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface.

Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is

provided.

Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.

–

4-GB

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the set due to lightning and power-line surges.

Service

Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

When the power cord or plug is damaged or frayed.

If liquid has been spilled or objects have fallen into the set.

If the set has been exposed to rain or water.

If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

If the set does not operate normally when following the operating instructions. Adjust only those controls

that are specified in the operating instructions. Improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the set to normal operation.

When the set exhibits a distinct change in performance − this indicates a need for service.

Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous

voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by

the manufacturer that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check

Upon completion of any service or repairs to the set, as the service technician to perform routine safety

checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

For Customers in the U.S.A.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your

authority to operate this equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

–

5-GB

Notice on the supplied AC Adaptor for customers in the United

Kingdom

A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and

approved by ASTA or BSI to BS1362, (i.e., marked with or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you

change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact

your nearest Sony service station.

For Customers in Europe

This product has been tested and found compliant with the limits sets out in the EMC Directive for using

connection cables shorter than 3 meters (9.8 feet).

Attention

The electromagnetic field at the specific frequencies may influence the picture and sound of this unit.

Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan.

The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse

61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in

separate service or guarantee documents.

Disposal of Old Electrical & Electronic Equipment (Applicable in

the European Union and other European countries with separate

collection systems)

This symbol on the product or on its packaging indicates that this product shall

not be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By

ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more detailed information

about recycling of this product, please contact your local Civic Office, your

household waste disposal service or the shop where you purchased the product.

6-GB

Disposal of waste batteries (applicable in the European Union and

other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with

this product shall not be treated as household waste.

By ensuring these batteries are disposed of correctly, you will help prevent potentially

negative consequences for the environment and human health which could otherwise be

caused by inappropriate waste handling of the battery. The recycling of the materials will

help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a

permanent connection with an incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will be treated properly, hand over

the product at end-of-life to the applicable collection point for the recycling of electrical

and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the

product safely.

Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact

your local Civic Office, your household waste disposal service or the shop where you

purchased the product.

7-GB

Table of contents

Notes on using the Cyber-shot Station ............................................................................................8

Features ................................................................................................................................................ 9

Trademarks ..........................................................................................................................................9

Identifying the parts .........................................................................................................................10

Set up ..................................................................................................................................................12

Placing the camera on the Cyber-shot Station ............................................................................14

Removing the camera from the Cyber-shot Station ...................................................................14

Charging the battery pack ..............................................................................................................14

Viewing images on a TV screen ....................................................................................................15

Remote Commander functions ......................................................................................................16

Care and maintenance .....................................................................................................................17

Changing the battery of the Remote Commander .......................................................................17

Troubleshooting ................................................................................................................................18

Specifications ....................................................................................................................................19

8-GB

Notes on using the Cyber-shot Station

Refer to the operating instructions for your camera as well as this manual.

The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.

The CSS-HD2 can be used with the DSC-T300/T75/T70/T2/W300/W170/W150/W130/W125/W120/W115/

W110 digital still cameras. Not all of the above models are available in all countries and regions.

About the station plates

The Cyber-shot Station is supplied with 5 station plates that are

compatible with various digital cameras (hereinafter referred to as the

“camera”). See page 12 for further details.

Be sure to set the correct station plate that is compatible with your camera

before using. If you set the wrong station plate, the I/O unit could be

damaged.

The illustration in this manual shows the combination of DSC-T300 and

station plate for DSC-T300.



Precautions on use and storage locations:

Do not use or keep the Cyber-shot Station in locations subject to the following conditions. Otherwise, the

Cyber-shot Station could malfunction.

Locations subject to extreme high temperature

Temperatures in a hot sun or closed automobiles during summer may be extremely high, causing

deformation or malfunction of the Cyber-shot Station.

Locations under direct sunlight or near heaters

This may cause deformation or a malfunction of the Cyber-shot Station.

Locations subject to vibration

Locations subject to strong magnetism

Locations subject to dust particles in a sandy place or the beach

Precautions on use:

Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long

as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately

shut off the power by disconnecting the plug from the wall outlet (wall socket).

Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product,

unplug the AC Adaptor to cut off the power source.

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet,

even if the set itself has been turned off.

Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images

may not be played back properly.

Avoid other metallic objects from coming in contact with the connecting parts of the Cyber-shot Station

and the power cord. It may cause a short circuit.

Precautions on recorded data:

Please note that Sony will not be liable for recorded data such as images and audio data if you cannot record

or play back due to a malfunction of the camera, recording media, or the Cyber-shot Station.



9-GB

Features

When you place a camera on the Cyber-shot Station, you can use the Cyber-shot Station in the following way.

You can view the images of the camera in high definition by connecting the Cyber-shot Station to a high

definition TV. Images can be viewed in standard definition on a normal TV.

You can easily view images on a TV screen with the wireless Remote Commander.

Using the Remote Commander, you can operate the followings:

Viewing images

Slide Show

Playback zoom

Display the images in index display and switch the way to display images to “Folder,” “Date View,” or

“Favorites” (except for DSC-T75/T70/T2/W130/W125/W120/W115/W110).

Display the images in index display and search for the image by “All people,” “Children,” “Smiles,” or

“Infants” (except for DSC-T75/T70/T2/W130/W125/W120/W115/W110).

The Cyber-shot Station can charge the battery pack inside the camera faster than the battery charger

supplied with the camera when you simply place the camera on it.

Trademarks

and “Cyber-shot Station” are trademarks of Sony Corporation.

In addition, system and product names used in this manual are, in general, trademarks or registered

trademarks of their respective developers or manufacturers. However, the



or



marks are not used in all

cases in this manual.



–



10-GB

Identifying the parts

Cyber-shot Station

I/O unit

Protection cover

Detach this cover

before use.

Positioning marker

POWER lamp

CHARGE lamp

Camera front guide

Remote sensor

HD OUTPUT lamp

DC IN jack

AV OUT jack

Station plate

Camera side guide

Positioning marker B

Positioning marker A

The Cyber-shot Station is supplied with 5 station plates. Be sure to attach the correct station plate before

use.

See page 12 for further details.



11-GB

Remote Commander

The functions of the Remote Commander differ depending on the camera you use.

When using DSC-T75/T70/T2, the Remote Commander of the Cyber-shot Station functions the same as the

Remote Commander of CSS-HD1, except for the functions of the (Slide Show) button and the control

buttons.

Also, some buttons do not function at all. For further information on the functions of the control buttons,

refer to the operating instructions supplied with the camera.

Control buttons

(//// )

VIEW MODE button

*1

FACE button

*1

W ZOOM button

*2

(Slide Show) button

MENU button

HD/SD button

*2

V UP button/

V DOWN button

*2

POWER button (CAMERA)

Playback Zoom ( ) button

Playback Zoom ( )/

Index( ) button

HOME button

*2

*1 These functions are not supported for DSC-T75/T70/T2/W130/W125/W120/W115/W110.

*2 These functions are not supported for DSC-T75/T70/T2.

12-GB

Using a right-sliding station plate (such as

HD2-A)

Using a left-sliding station plate (such as

HD2-B)

 Hold the Cyber-shot Station with one hand.

Hold the camera side guide of the station

plate with the other hand and slide the station

plate until it is pushed in all the way.

See the table in step 1 for the sliding direction.

Sliding to the right

Sliding to the left



Set up

Preparing the Cyber-shot Station

1 Select a station plate.

The station plates have a front side and bottom

side.

Front side

Sony logo

Bottom side

Plate name

Select the station plate corresponding with your

camera.

Model name Plate name Sliding

direction

DSC-T300 HD2-A Right

DSC-W110

HD2-B Left

DSC-W115

DSC-W120

DSC-W125

DSC-W130

DSC-W150

HD2-C Left

DSC-W170

DSC-W300 HD2-D Left

DSC-T2

HD2-E RightDSC-T70

DSC-T75

2 Attach the station plate.



Hold the station plate on the front side (the

side with the Sony logo) facing you, and place

it on the I/O unit of the Cyber-shot Station

as if you place it over the protection cover

attached on the I/O unit.

13-GB

 The station plate will sink in when it is slid all

the way to the correct position. You will hear

a click when the plate is attached properly.

If the station plate does not sink in properly,

evenly push down on its left/right sides.

The positioning marker A on the station plate

and positioning marker on the Cyber-shot

Station will be aligned.

 Detach the protection cover of the I/O unit.

Before you place a camera on the Cyber-shot

Station, be sure to detach the protection cover.

Detaching the station plate

Hold the Cyber-shot Station with one hand. Hold

the camera side guide of the station plate with the

other hand and pull the station plate upward.

3 Connect the supplied AC Adaptor to the DC

IN jack of the Cyber-shot Station.

The POWER lamp of the Cyber-shot Station

lights up.



Cyber-shot Station

DC plug

AC Adaptor

To a wall

outlet

(wall socket)

AC Power cord

(mains lead)

To use your Cyber-shot Station abroad

– Power sources

You can use the Cyber-shot Station and the AC

Adaptor (supplied) in any country or region where

the power supply is within 100 V to 240 V AC

50/60 Hz.

Use a commercially available AC plug adaptor,

if necessary, depending on the design of the wall

outlet (wall socket).

AC plug adaptor

(not supplied)

Do not use an electronic transformer (travel

converter), as this may cause a malfunction.

Preparing the Remote Commander

Notes on the Remote Commander

The Remote Commander is powered by a button

type lithium battery (CR2025) installed at the

factory. An insulation sheet is inserted to avoid

the battery exhaustion. Remove the insulation

sheet before using the Remote Commander for

the first time.

Insulation sheet

Point the remote sensor of the Cyber-shot Station

away from strong light sources such as direct

sunlight or overhead lightings. Otherwise, the

Remote Commander may not function properly.



14-GB

The Remote Commander range is less than

five meters (for indoor use). Point the Remote

Commander at the remote sensor of the Cyber-

shot Station. Try adjusting the angle of the

Remote Commander if you cannot operate the

Cyber-shot Station.

Placing the camera on the

Cyber-shot Station

Remove the Adaptor ring, the Conversion lens,

etc. from the camera.

Attach the camera as shown below.

Be sure to turn off the camera before placing it on

the Cyber-shot Station.

When attaching the camera, make sure to insert

the camera straight down.

Tips

Make sure that the camera is securely attached to

the Cyber-shot Station.







Removing the camera from

the Cyber-shot Station

Hold the Cyber-shot Station down when you

remove the camera from the Cyber-shot Station.

Notes

When removing the camera, make sure to lift the

camera straight up. It may damage the camera or

the Cyber-shot Station when some extra force is

added to the front or the sides.

Charging the battery pack

Place the camera with the battery pack

inserted on the Cyber-shot Station.

Charging starts automatically. The CHARGE lamp

of the Cyber-shot Station lights up.

When the camera is turned on, the Cyber-shot

Station cannot charge the battery pack.

When the charging reaches to Normal charge*,

the CHARGE lamp goes off.

Recording and playback time with Normal

charge

is

approximately

90% of Full

charge.

For the time of the full charge for a completely

discharged battery at the temperature of 25 °C

(77 °F), see the table below.

DSC-T300/T75/T70/T2 Approx.

160 minutes

DSC-

W300/W170/W150//W130/

W125/W120/W115/W110

Approx.

230 minutes

It may take longer to charge, depending on the

charging condition and environment.







*



–

15-GB

Viewing images on TVs other than high-

definition TV

Connect the A/V OUT jack of the Cyber-shot

Station and the audio/video input jacks of the

TV.

A/V connecting cable

Red

White

Yellow

Audio

Video

Turn off the TV before connecting the Cyber-

shot Station and TV with the Component

A/V Cable.

The signal format to be output from the A/V

OUT jack depends on the camera setting.

To view the 1080i format images, you need a

TV compatible with 1080i format.

The audio to be output from the Cyber-shot

Station via the A/V OUT jack is monaural.

The Cyber-shot Station is not compatible with

the S-VIDEO connecting cable.

2 Turn on the power by pressing the

(playback) button of the camera or the

POWER button on the Remote Commander.

Tips

The buttons on the camera or the Remote

Commander may not function immediately

after the camera is attached to the Cyber-

shot Station. This occurs when the camera is

booting up and is not a malfunction. Wait for

about 10 seconds.

3 Turn on the TV and set the input switch to

the input connected in step 1.

4 Press / on the Control buttons of the

Remote Commander to select the image.

You can also select the image by pressing /

on the Control buttons of the camera.

The Cyber-shot Station is compatible with both

NTSC and PAL TV systems. For further details,

see the operating instructions supplied with the

camera.







Notes

After attaching the camera to the Cyber-shot

Station, the CHARGE lamp may blink slowly for

3 to 10 seconds. This indicates communication

between the camera and the Cyber-shot Station,

and it is not a malfunction.

If CHARGE lamp does not light or blinks for

more than 10 seconds, refer to “Troubleshooting”.

Charging temperature

The temperature range for charging is 0 °C to

40 °C (32 °F to 104 °F). However, to provide

maximum battery efficiency, the recommended

temperature range when charging is 10 °C to

30 °C (50 °F to 86 °F).

On battery life

The battery life is limited. Battery capacity

decreases little by little as you use it more and

more, and as time passes. If the battery operating

time seems shortened considerably, a probable

cause is that the battery pack has reached the end

of its life. Buy a new battery pack.

The battery life varies according to how it

is stored and the operating conditions and

environment in which each battery pack is used.

Viewing images on a TV

screen

You can playback images by connecting the Cyber-

shot Station to the TV with the A/V connecting

cable (supplied) or the Component A/V Cable

(supplied).

Refer to the operating instructions supplied with

the TV for connection.

1 Viewing images on a high-definition TV

Connect the A/V OUT jack of the Cyber-shot

Station and the Component AV jacks of the TV.

Component A/V Cable

Red

White

Audio

Green

Blue

Red

Y

Pb/Cb

Pr/Cr





16-GB

Remote Commander

functions

The functions of the Remote Commander differ

depending on the camera you use.

For further information, refer to the operating

instructions supplied with the camera.

Slide show

You can play back a series of still images recorded

with your camera by only pressing the (Slide

Show) button on the Remote Commander.

1 Turn on the power of the camera by

pressing the

(playback) button of

the camera or the POWER button on the

Remote Commander.

2 Press the (Slide Show) button on the

Remote Commander.

The Slide Show settings screen appears.

The Slide Show settings screen may not be

displayed on some models even if you press

the (Slide Show) button. The Slide Show

will start in the preset conditions. For further

details about the setting method, refer to

the operating instructions supplied with the

camera.

3 Use the control buttons on the Remote

Commander to change the settings of the

Slide Show.

4 Use the control buttons on the Remote

Commander to select [OK] and press the

center

button or press the (Slide

Show) button on the Remote Commander.



To cancel Slide Show

Press the (Slide Show) button on the Remote

Commander again.

For further information, refer to the operating

instructions supplied with the camera.

Switching the view mode

You can change the index display by pressing the

VIEW MODE button on the Remote Commander.

Except for DSC-T75/T70/T2/W130/W125/W120/

W115/W110.

1 Turn on the power of the camera by

pressing the

(playback) button of

the camera or the POWER button on the

Remote Commander.

2 Press the VIEW MODE button on the

Remote Commander.

The view mode screen appears.

3 Use the control buttons on the Remote

Commander to select the desired view

mode and press the center

button.

The images are displayed in index mode using

the view mode you just selected.

When you press the V UP button and V DOWN

button on the Remote Commander, you can

perform the following functions in each view

mode.

Date View mode:

Display the previous date and next date.

Folder mode:

Display the previous folder and next folder.

Favorites mode:

Display the previous page and next page.

Filter by Faces

You can search the images recorded with various

faces by pressing the FACE button on the Remote

Commander.

Except for DSC-T75/T70/T2/W130/W125/W120/

W115/W110.

1 Turn on the power of the camera by

pressing the

(playback) button of

the camera or the POWER button on the

Remote Commander.

2 Press the FACE button on the Remote

Commander.

The Search images menu appears.



–



17-GB

3 Use the control buttons on the Remote

Commander to select the search condition

and press the center

button.

The images are displayed in index mode in

accordance with the search condition.

For further information, refer to the operating

instructions supplied with the camera.

Switching between HD and SD

You can switch the TV display between high-

definition video (HD) and other than high-

definition video (SD) by pressing the HD/SD button

on the Remote Commander.

Except for DSC-T75/T70/T2.

1 Turn on the power of the camera by

pressing the

(playback) button of

the camera or the POWER button on the

Remote Commander.

2 Press the HD/SD button on the Remote

Commander.

Every time you press the HD/SD button, the

setting will change alternately between HD and

SD.

The HD-OUTPUT lamp (blue) of the Cyber-shot

Station lights up while the HD video is viewed

on a TV.

For further information, refer to the operating

instructions supplied with the camera.

Wide Zoom Display

You can display a still image with an angle of view of

4:3 or 3:2 to those of 16:9 by pressing the W ZOOM

button on the Remote Commander, which is the

same as the wide zoom function of the camera.

For DSC-T75/T70, the Wide Zoom functions

when you press the



button on the Remote

Commander.

Except for DSC-T2.

1 Turn on the power of the camera by

pressing the

(playback) button of

the camera or the POWER button on the

Remote Commander.

2 Press the W ZOOM button on the Remote

Commander.

Every time you press the W ZOOM button, the

setting will change alternately between Wide

Zoom and Normal modes.

The Wide Zoom mode is canceled when you turn

off the camera or the shooting mode is switched.

Some functions of the Remote Commander will

be unavailable when you are using the Wide

Zoom function.



For further information, refer to the operating

instructions supplied with the camera.

Care and maintenance

Clean the Cyber-shot Station with a soft cloth

slightly moistened with water or tepid water, and

wipe the surface with a dry cloth. Do not use any

type of solvent such as thinner, alcohol or benzine

as this may damage the surface.

Changing the battery of the

Remote Commander

WARNING

Battery may explode if mistreated. Do not recharge,

disassemble, or dispose of in fire.

When the lithium battery becomes weak, the

operating distance of the Remote Commander

may shorten, or the Remote Commander may

not function properly. In this case, replace the

battery with a Sony CR2025 lithium battery. Use

of another battery may present a risk of fire or

explosion.

For the State of California, USA only

Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains

perchlorate.

CAUTION

Replace the battery with the specified type only.

Otherwise, fire or injury may result.

Replacing the button type lithium

battery

Do not use any batteries other than CR2025.

 Pull out the battery holder while pushing the

tab on the holder.

 Put a new battery into the holder with its +

side facing upward.

 Insert the holder into the Remote

Commander until it clicks.

tab



*

18-GB

Troubleshooting

If any problems occur with your products, refer to the following solutions.

If the problem persists, contact your Sony dealer.

Symptom Cause/Solution

Unable to charge the battery pack or the

CHARGE lamp fails to light.

The camera is turned on.

Turn the camera off.

The AC Adaptor is disconnected.

Connect the AC Adaptor properly.

The camera is not placed on the Cyber-shot Station correctly.

Place the camera correctly.

The battery pack is not installed correctly.

Install the battery pack correctly.

The battery pack is completely charged.

The battery pack installed into the camera is inapplicable.

Install the battery pack compatible with your camera.





















The CHARGE lamp blinks fast, or blinks

for more than 10 seconds.

The battery pack installed into the camera is inapplicable.

Install the battery pack compatible with your camera.

The connection is not correct. The camera is not placed

correctly on the Cyber-shot Station.

Remove the camera from the Cyber-shot Station and

reconnect the AC Adaptor. After the CHARGE lamp goes

off, place the camera on the Cyber-shot Station.









Unable to turn on the camera, or

it suddenly gets turned off.

The camera is not placed on the Cyber-shot Station correctly.

Place the camera correctly.

The AC Adaptor is disconnected.

Connect the AC Adaptor properly.









The images cannot be played back on

a TV.

The HD output setting is incorrect.

Refer to the operating instructions supplied with the

camera, and set the HD output setting correctly.

The Component A/V Cable or A/V connecting cable from the

Cyber-shot Station is not connected properly to the TV.

Connect the cable properly or correct the setting.









Buttons on the Remote Commander

do not work, and no operations can be

performed.

The camera is not placed correctly on the Cyber-shot Station.

Place the camera correctly.

The AC Adaptor is disconnected.

Connect the AC Adaptor properly.

The battery in the Remote Commander is dead.

Replace the battery with a new one.













Unable to attach the camera on the

Cyber-shot Station or the camera is

unstable.

The station plate is not attached properly.

Confirm that the station plate is compatible with your

camera and attach it properly.





19-GB

Specifications

Cyber-shot Station

Input/Output connectors

A/V OUT jack:

Component, Video/audio output

connector

DC IN jack

I/O unit

General

Dimensions (Approx.):

124 × 48 × 78 mm

(5 × 1 15/16 × 3 1/8 in.)

(w/h/d)

Mass (Approx.): 110 g (3.9 oz.)

(including a station plate)

Operating temperature:

0 °C to 40 °C

(32 °F to 104 °F)

Storage temperature:

–20 °C to +60 °C

(–4 °F to +140 °F)

AC Adaptor

Input rating: 100 V to 240 V, AC 50/60 Hz,

11 W

Output rating: 4.2 V DC

See the label on the AC Adaptor

for other specifications.

Dimensions (Approx.):

48 × 29 × 81 mm

(1 15/16 × 1 3/16 × 3 1/4 inches)

(w/h/d, excluding projecting

parts)

Mass (Approx.): 130 g (5 oz)

(excluding AC Power cord)

Operating temperature:

0 °C to 40 °C

(32 °F to 104 °F)

Storage temperature:

–20 °C to +60 °C

(–4 °F to +140 °F)



Included items

Cyber-shot Station (CSS-HD2) (1)

Wireless Remote Commander (RMT-CSS6)

(A button type lithium battery installed) (1)

Station plate (5)

A/V connecting cable (1)

Component A/V Cable (1)

AC Adaptor (AC-LS5) (1)

AC Power cord (mains lead) (1)

Protection cover (1)

Set of printed documentation

Design and specifications are subject to change

without notice.



2-FR

Français

Avant d’utiliser cet appareil, lisez attentivement ce mode d’emploi et conservez-le pour toute référence

ultérieure.

AVERTISSEMENT

Afin de réduire les risques d’incendie ou de décharge électrique,

n’exposez pas cet appareil à la pluie ou à l’humidité.

Note pour les clients européens

Cet appareil a été testé et jugé conforme aux limites établies par la directive EMC visant l’utilisation de câbles

de connexion de moins de 3 mètres.

Attention

Le champ électromagnétique à des fréquences particulières peut avoir une incidence sur l’image et le son de

cet appareil.

Avis aux consommateurs des pays appliquant les Directives UE

Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japon. Le

représentant agréé pour la compatibilité électromagnétique et la sécurité du produit est Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question relative à la garantie ou aux

réparations, reportezvous à ladresse que vous trouverez dans les documents ci-joints, relatifs à la garantie et

aux réparations.

Traitement des appareils électriques et électroniques en fin de vie

(Applicable dans les pays de l’Union Européenne et aux autres pays

européens disposant de systèmes de collecte sélective)

Ce symbole, apposé sur le produit ou sur son emballage, indique que ce produit

ne doit pas être traité avec les déchets ménagers. Il doit être remis à un point de

collecte approprié pour le recyclage des équipements électriques et électroniques. En

s'assurant que ce produit est bien mis au rebut de manière appropriée, vous aiderez

à prévenir lesconséquences négatives potentielles pour l'environnement et la santé

humaine. Le recyclage des matériaux aidera à préserver les ressources naturelles. Pour

toute information supplémentaire au sujet du recyclage de ce produit, vous pouvez

contacter votre municipalité, votre déchetterie ou le magasin où vous avez acheté le

produit.

La page charge ...

Sony CSS-HD2 Le manuel du propriétaire

Sony CSS-HD2 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents