Dell PowerEdge SC1420 Mode d'emploi

www.dell.com | support.dell.com

Dell™ PowerEdge™

SC1420 Systems

Information Update

信息更新

Mise à jour des informations

Aktuelle Informationen

アップデート情報

정보 업데이트

Actualización de información

www.dell.com | support.dell.com

Dell™ PowerEdge™

SC1420 Systems

Information Update

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how

to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see "Glossary" in your

User’s Guide

.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks

of Microsoft Corporation; Red Hat is a registered trademark of Red Hat, Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

October 2004 P/N J4706 Rev. A05

Contents 3

Contents

Installing Microsoft Windows Small Business Server 2003 . . . . . . . . . 5

Installing Red Hat Enterprise Linux ES (version 3)

. . . . . . . . . . . . . . 5

Memory Cooling Fan and Shroud

. . . . . . . . . . . . . . . . . . . . . . 5

Installing the Memory Cooling Fan and Shroud

. . . . . . . . . . . . . 6

System Error Messages

. . . . . . . . . . . . . . . . . . . . . . . . . . 7

System Setup Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Main Screen

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Assigning a System Password

. . . . . . . . . . . . . . . . . . . . . . . 14

Using Your System Password to Secure Your System

. . . . . . . . . . 15

Operating With an Admin Password Set

. . . . . . . . . . . . . . . . . . 15

Systems With Four Hard Drives or a Tape Backup Unit

. . . . . . . . . . . . 16

Installing SCSI Hard Drives

. . . . . . . . . . . . . . . . . . . . . . . . 16

Missing Memory in Systems With PCI Express ("Memory Hole")

. . . . . . . 17

4 Contents

Figures

Figure 1-1. Installing the Memory Cooling Fan and Shroud . . . 6

Figure 1-2. Main System Setup Program Screen

. . . . . . . . 8

Figure 1-3. Installing SCSI Hard Drives

. . . . . . . . . . . . 16

Tables

Table 1-1. System Messages . . . . . . . . . . . . . . . . . 7

Table 1-2. System Options

. . . . . . . . . . . . . . . . . . 9

Table 1-3. Drive Options

. . . . . . . . . . . . . . . . . . . 9

Table 1-4. Onboard Devices Options

. . . . . . . . . . . . 10

Table 1-5. Performance Options

. . . . . . . . . . . . . . 11

Table 1-6. Security Options

. . . . . . . . . . . . . . . . 11

Table 1-7. Power Management Options

. . . . . . . . . . . 12

Table 1-8. Maintenance Options

. . . . . . . . . . . . . . 13

Table 1-9. POST Behavior Options

. . . . . . . . . . . . . 13

Information Update 5

This document provides updated information for your system on the following topics:

• Installing Microsoft

®

Windows

®

Small Business Server 2003

• Installing Red Hat

®

Enterprise Linux ES (version 3)

• Memory cooling fan and shroud

• System error messages

• System setup options

• Execute Disable feature (System Setup options/Security options)

• Assigning a system password

• Operating with an admin password set

• Systems with four hard drives or a tape backup unit

• Installing SCSI hard drives

• Missing Memory in Systems With PCI Express ("Memory Hole")

Installing Microsoft Windows Small Business Server 2003

If you install Microsoft Windows Small Business Server 2003 on a Dell™ PowerEdge™

SC

1420, the

installation process may appear to cease with about thirteen minutes remaining during the time

when Windows reports that it is registering components. During this portion of the installation,

Windows installs additional security updates and patches, which may take significantly longer to

install than the reported expected time remaining. While these updates are installing, you should

take no action and allow the installation the necessary time to complete. Dell testing has shown the

delay to range from 5 to over 45 minutes, depending upon your hardware configuration. Microsoft

has documented this behavior in Knowledge Base article #839492.

Installing Red Hat Enterprise Linux ES (version 3)

Before installing Linux on your system, change the

SATA Operation

option under the

Drives

menu

in the System Setup program to

RAID Off

.

Memory Cooling Fan and Shroud

NOTICE: If you install more than 4 GB of memory, you must install the memory cooling fan and shroud

to prevent the memory from overheating. If you do not install the memory cooling fan and shroud, you will

receive an error message stating that you must install a fan or remove some memory.

6 Information Update

www.dell.com | support.dell.com

Installing the Memory Cooling Fan and Shroud

CAUTION: See your System Information Guide for complete information about safety precautions,

working inside the computer, and protecting against electrostatic discharge.

1

Turn off the system and attached peripherals, and disconnect the system from the electrical

outlet.

2

Open the system.

3

Align the memory cooling fan and shroud tabs with the holes on the back panel.

See Figure 1-1.

Figure 1-1. Installing the Memory Cooling Fan and Shroud

4

Insert the tabs and lower the memory cooling fan and shroud until it snaps into place.

5

Connect the memory cooling fan and shroud power cable to the system board. See Figure 1-1.

6

Close the system.

7

Reconnect the system to the electrical outlet, and turn on the system.

cooling fan

and shroud

shroud tabs (4)

power cable

Information Update 7

System Error Messages

Table 1-1 lists the system error messages that have been added to POST.

Table 1-1. System Messages

Message Causes Corrective Actions

Alert! Memory fan has

failed or is not present.

A memory fan is required

for the current memory

configuration. Please see

the documentation that

came with your computer

for more information.

Greater than 4 GB memory installed

without installing required memory

fan.

Install or replace the memory cooling fan

and shroud.

Alert! Operating in debug

mode. Please populate

memory in pairs for normal

operation.

Only one memory module with a

capacity greater than 256 MB is

installed in DIMM_1.

You will see this error message when

troubleshooting memory modules. After

you have completed the troubleshooting

procedures, populate the memory in

identical pairs. See "Troubleshooting

System Memory" and "Memory

Installation Guidelines" in your

Installation and Troubleshooting Guide.

Alert! Unable to

initialize fan controller.

Faulty system board. See "Getting Help" in your Installation

and Troubleshooting Guide.

Error! Memory configured

incorrectly. Please enter

Setup for Memory Info

details.

The memory modules are installed

incorrectly.

See "Memory Installation Guidelines"

in your Installation and Troubleshooting

Guide.

8 Information Update

www.dell.com | support.dell.com

System Setup Options

Main Screen

Figure 1-2 shows an example of the main screen.

Figure 1-2. Main System Setup Program Screen

Information Update 9

Table 1-2 through Table 1-9 list the options and descriptions for each group of information fields

that appear on the main System Setup program screen.

NOTE: The System Setup program defaults are listed under their respective options, where applicable.

Table 1-2. System Options

Option Description

System Info

Displays the

System

name,

BIOS Version

number,

BIOS Date

,

Service Tag,

Express Service Code

, and

Asset Tag

.

CPU Info

Displays the following information for the processor installed in the system:

Processor Type

,

Processor Clock Speed

,

Processor Bus Speed

,

Processor Cache

Size

,

Processor ID

number, whether the processor is

Hyper-Threading Capable

,

and if the processor has

64-bit Technology

.

Memory Info

Displays the amount of

Installed Memory

,

Memory Speed

,

Memory Channel

Mode

, and a description of the

Memory Technology

. This option also displays

a table that describes the memory size, whether the memory module is ECC

capable, single or dual rank, type, and organization.

Date/Time

Resets the system’s internal calendar and clock.

Boot Sequence

(Diskette drive default)

Determines the order in which the system searches for boot devices during

system startup. Available options can include the diskette drive, CD drive,

hard drives, and network.

Table 1-3. Drive Options

Option Description

Diskette Drive

(Internal default)

Enables and disables the diskette drives and sets read permission for the internal

diskette drive.

Off

disables all diskette drives.

USB

disables the internal diskette

drive and enables a USB drive if the USB controller is enabled and a USB drive is

connected.

Internal

enables the internal diskette drive.

Read Only

enables the

internal drive controller and allows the internal diskette drive read-only

permission.

NOTE: Diskette drives are optional and may not be part of your system.

Drive (0-5)

(On default)

Enables or disables a PATA or SATA device (such as hard-drive, CD drive,

or DVD drive).

Off

disables the interface so that the device cannot be used.

On

enables the interface so that the device can be used.

Displays the Controller type (PATA or SATA), Port number the drive is using,

Drive ID number, Capacity, and whether the drive is controlled by the BIOS.

NOTE: Drive 0 and drive 1 are reserved for SATA drives and drives 2–5 are

reserved for PATA or IDE drives.

10 Information Update

www.dell.com | support.dell.com

SATA Operation

(RAID On default)

Determines the integrated SATA controller’s operating mode.

RAID On

enables

RAID support.

RAID Off

disables RAID support.

NOTICE: When using a SCSI RAID add-in controller card, set the integrated

SATA controller’s operating mode to RAID Off.

SMART Reporting

(Off default)

Determines whether hard-drive errors for internal drives are reported during

system startup.

Off

does not report errors.

On

reports errors.

Table 1-4. Onboard Devices Options

Option Description

Integrated NIC

(On default)

Enables or disables the integrated NIC controller.

Off

disables the controller.

On

enables the controller.

NOTE:

PXE or RPL is required only if you are booting to an operating system on

another system; not if you are booting to an operating system on a hard drive in

this system.

USB

(On default)

Enables or disables the internal USB controller. Off disables the controller. On

enables the controller. No Boot enables the controller but disables the ability

to boot from a USB device.

LPT Port Mode

(PS/2 default)

Determines the mode of operation of the internal parallel port.

Off

disables the

port.

AT

configures the port for IBM AT compatibility.

PS/2

configures the port

for IBM PS/2 compatibility.

EPP

configures the port for the EPP bidirectional

protocol.

ECP

configures the port for the ECP bidirectional protocol.

If you set the LPT Port Mode to ECP, the LPT Port DMA option appears

in the option menu.

LPT Port Address

(378 default)

Determines the address that the built-in parallel port uses.

Serial Port (#1 or #2)

(Auto default)

Serial Port 1 options are COM1, COM3, Auto, and Off.

Serial Port 2 options are COM2, COM4, Auto, and Off.

When serial port 1 or 2 is set to Auto, the integrated port automatically maps

to the next available port. Serial port 1 attempts to use COM1 first and then

COM3. Serial port 2 attempts to use COM2 first and then COM4. If both

addresses are in use for a specific port, the port is disabled.

If you set the serial port to Auto and add an expansion card with a port

configured to the same designation, the system automatically remaps the

integrated port to the next available port designation that shares the same

IRQ setting.

PS/2 Mouse Port

(On default)

Enables or disables the integrated PS/2-compatible mouse controller.

Off disables the controller. On enables the controller.

Table 1-3. Drive Options (continued)

Option Description

Information Update 11

Table 1-5. Performance Options

Option Description

Hyper-Threading

(On default)

Determines whether the physical processor appears as one or two logical

processors. The performance of some applications improve with additional

logical processors installed. On enables hyper-threading. Off disables hyper-

threading.

HDD Acoustic Mode

(Performance default)

Allows you to optimize SATA or PATA drive performance and noise level based

on personal preferences. Bypass is used for older drives. Quiet slows drive

performance but reduces drive noise. Suggested adjusts performance to the

manufacturers preferred mode. Performance increases drive performance but

may increase drive noise.

Table 1-6. Security Options

Option Description

Admin Password

(Not Set default)

Displays the current status of your System Setup program’s password security

feature and allows you to verify and assign a new admin password.

NOTE: See "Using the Admin Password" in your User’s Guide for instructions

on assigning an admin password and using or changing an existing admin

password.

System Password

(Not Set default)

Displays the current status of your system's password security feature and

allows you to verify and assign a new system password.

NOTE: See "Using the System Password" in your User’s Guide for instructions

on assigning a system password and using or changing an existing system

password.

Password Changes

(Unlocked default)

Determines the interaction between the System password and the Setup

password. Locked prevents a user with a valid Setup password from being able

to modify the System password. Unlocked allows a user with a valid Setup

password to modify the system password.

Chassis Intrusion

(On-Silent default)

Enables or disables the chassis-intrusion detection feature. When set to On-

Silent, chassis intrusion is detected but no warning message is reported during

start-up. When set to On, this field displays DETECTED when the chassis

cover has been opened. Pressing any edit key acknowledges the intrusion and

arms the system to look for further security breaches. Off disables the chassis-

intrusion detection feature.

Intrusion Alert Pressing the <Enter> key acknowledges the intrusion and arms the system

to look for further security breaches.

12 Information Update

www.dell.com | support.dell.com

Execute Disable

(On default)

Execute Disable (XD) is a new security feature that helps prevent code

execution in certain memory areas when combined with a supported operating

system or application. Execute Disable can help to prevent a class of viruses

that use buffer overflow attacks.

Execute Disable has two settings, On and Off. On indicates that Execute

Disable Memory Protection Technology is on. Off indicates that Execute

Disable Memory Protection Technology is off.

Table 1-7. Power Management Options

Option Description

AC Recovery

(Last default)

Determines how the system responds when AC power is reapplied after a

power loss. Off commands the system to stay off when the power is reapplied.

You must press the front-panel power button before the system turns on.

On commands the system to turn on when the power is reapplied. Last

commands the system to return to the last power state the system was in just

before it was turned off.

Auto Power On

(Off default)

Determines when to use the Auto Power Time setting to turn on the system.

Off commands the system to not use the Auto Power Time feature. Everyday

turns on the system every day at the time set in Auto Power Time. Weekdays

turns on the system every day from Monday through Friday at the time set in

Auto Power Time.

Auto Power Time Determines the time that you want the system to turn on.

Low Power Mode

(Off default)

On conserves more power by removing power from most hardware features.

Off conserves less power and removes power from fewer hardware features.

Remote Wake Up

(Off default)

Determines how the system is turned on remotely from the Suspend,

Hibernate, or Off states. Off disables the NIC from waking up the system.

On enables the NIC to wake up the system. On w/ Boot to NIC enables

the NIC to wake up the system and boot from the network.

If you want the system to perform a Remote Wake Up, you must first set

Low Power Mode to Off.

Table 1-6. Security Options (continued)

Option Description

Information Update 13

Table 1-8. Maintenance Options

Option Description

Load Defaults Allows you to restore all System Setup options to their factory defaults.

Event Log Allows you to view the Event Log. Entries are marked R for Read and U

for Unread. Mark All Entries Read puts an R to the left of all the entries.

Clear Log clears the Event Log.

Table 1-9. POST Behavior Options

Option Description

Fast Boot

(On default)

When enabled, this feature reduces system startup time by bypassing some

compatibility steps. Off does not skip any steps during system startup.

On starts the system more quickly.

Numlock Key

(On default)

Determines the functionality of the numeric keys on the right side of your

keyboard. Off commands the right keypad keys to function as arrows.

On commands the right keypad keys to function as numbers.

POST Hotkeys

(Setup and Boot Menu

default)

Determines whether the sign-on screen displays a message stating the

keystroke sequence that is required to enter the Setup program or the

Quickboot feature. Setup & Boot Menu displays both messages

(F2=Setup and F12=Boot Menu). Setup displays the setup message only

(F2=Setup). Boot Menu displays the Quickboot message only

(F12=Boot Menu). None displays no message.

Keyboard Errors

(Report default)

When set to Report (enabled) and an error is detected during POST, the BIOS

will display the error message and prompt you to press <F1> to continue or

press <F2> to enter System Setup.

When set to Do Not Report (disabled) and an error is detected during POST,

the BIOS will display the error message and continue booting the system.

14 Information Update

www.dell.com | support.dell.com

Assigning a System Password

Before you assign a system password, enter the System Setup program and check the

System

Password

option.

When a system password is assigned, the setting shown for the

System Password

option is

Set

.

If the setting shown for the

Password Changes

is

Unlocked

, you can change the system password.

If the

Password Changes

option is

Locked

, you cannot change the system password. When the

system password feature is disabled by a jumper setting, the system password is

Disabled

,

and you cannot change or enter a new system password.

When a system password is not assigned and the password jumper on the system board is in

the enabled (default) position, the setting shown for the

System Password

option is

Not Set

and the

Password Changes

field is

Unlocked

. To assign a system password:

1

Verify that the

Password Changes

option is set to

Unlocked

.

2

Highlight the

System Password

option and press <Enter>.

3

Type your new system password.

You can use up to 32 characters in your password.

As you press each character key (or the spacebar for a blank space), a placeholder appears

in the field.

The password assignment is not case-sensitive. However, certain key combinations are not

valid. If you enter one of these combinations, the system beeps. To erase a character when

entering your password, press <Backspace> or the left-arrow key.

NOTE: To escape from the field without assigning a system password, press <Enter> to move

to another field, or press <Esc> at any time before completing step 5.

4

Press <Enter>.

5

To confirm your password, type it a second time and press <Enter>.

The setting shown for the

System Password

changes to

Set

.

6

Save and exit the System Setup program and begin using your system.

Information Update 15

Using Your System Password to Secure Your System

NOTE: If you have assigned an admin password (see "Using the Admin Password" in your User’s Guide),

the system accepts your admin password as an alternate system password.

When the

Password Changes

option is set to

Unlocked

, you have the option to leave the password

security enabled or to disable the password security.

To leave the password security enabled:

1

Turn on or reboot your system by pressing <Ctrl><Alt><Del>.

2

Type your password and press <Enter>.

When the

Password Changes

option is set to

Locked

whenever

you turn on your system or reboot

your system by pressing <Ctrl><Alt><Del>, type your password and press <Enter> at the

prompt.

After you type the correct system password and press <Enter>, your system operates as usual.

If an incorrect system password is entered, the system displays a message and prompts you to re-

enter your password. You have three attempts to enter the correct password. After the third

unsuccessful attempt, the system displays an error message showing the number of unsuccessful

attempts and that the system has halted and will shut down. This message can alert you to an

unauthorized person attempting to use your system.

Even after you shut down and restart the system, the error message continues to be displayed until

the correct password is entered.

NOTE: You can use the Password Changes option in conjunction with the System Password and Admin

Password options to further protect your system from unauthorized changes.

Operating With an Admin Password Set

If

Admin Password

is

Set

, you must enter the correct admin password before you can modify most

of the System Setup options. When you start the System Setup program, you must enter the

password from the

Unlock Setup

option.

If you do not enter the correct password in three attempts, the system lets you view, but not modify,

the System Setup screens—with the following exception: If

System Password

is not set to

Set

and is

not locked through the

Password Changes

option, you can assign a system password (however, you

cannot disable or change an existing system password).

NOTE: You can use the Password Changes option in conjunction with the Admin Password option

to protect the system password from unauthorized changes.

16 Information Update

www.dell.com | support.dell.com

Systems With Four Hard Drives or a Tape Backup Unit

NOTE: Call Dell for the processor fan and shroud specifications.

If your system contains a single processor and you upgrade to a configuration with four hard drives

or a tape backup unit, you must install the second processor fan and cooling shroud. See your

Installation and Troubleshooting Guide

for instructions about installing the processor fan and

cooling shroud.

Installing SCSI Hard Drives

When installing SCSI hard drives, you must connect the drives to a SCSI controller card.

See Figure 1-3. The installation illustration in your

Installation and Troubleshooting Guide

shows the drives being connected to the system board.

Figure 1-3. Installing SCSI Hard Drives

power cable

SCSI hard drive

interface cable

SCSI controller card

Information Update 17

Missing Memory in Systems With PCI Express

("Memory Hole")

A condition has been noted on system configurations containing PCI Express slots and RAM of

3.5 GB or greater. The operating system will show an amount of available RAM that is less than the

amount actually installed on the system. The difference of memory, commonly called a "memory

hole," is due to the requirements of the PCI Express subsystem and how memory is allocated by the

system. PCI Express requires RAM in amounts of 256 MB full blocks at a time. Therefore, a

minimum of 256 MB of memory is allotted by the system for PCI Express use, and the allocation

can go higher (in additional blocks of 256 MB) if the system contains additional adapters, either

peripheral or integrated, or if your system supports hot-plug PCI Express.

The memory hole is visible only at the operating system level. The System Setup program reports

the installed RAM correctly.

At this writing, one workaround is available, as reported in the Microsoft Knowledge Base article

#283037 available on Microsoft’s support website. The workaround applies only if your system has

4 GB or more of RAM and your operating system supports Physical Address Extensions (PAE).

NOTICE: You should exercise caution before enabling PAE in your operating system as a number of

problems can occur in certain system configurations. You should search both the Dell and Microsoft

Knowledge Bases for articles detailing these issues and take the appropriate measures to avoid them.

To enable PAE in Microsoft Windows 2000 and 2003, add a

/PAE

switch in the

boot.ini

file to the

line that corresponds to the Windows operating system. For other operating systems, refer to your

documentation or operating system support website for information on PAE support.

18 Information Update

www.dell.com | support.dell.com

La page charge ...

Dell PowerEdge SC1420 Mode d'emploi

Dell PowerEdge SC1420 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents