TP-LINK AC1300 High Gain Wireless Dual Band USB Adapter Mode d'emploi
- Taper
- Mode d'emploi
REV1.0.0 1910013290
User Guide
AC1300 High Gain Wireless Dual Band USB Adapter
Archer T4U
Contents
Chapter 1. About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Chapter 2. Get to Know About Your Adapter . . . . . . . . . . . . . . . . . . . . . .2
1. 1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1. 2. LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Chapter 3. Connect to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Chapter 4. Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3. 1. Install Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. 2. Join a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. 3. Uninstall Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 5. Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. 1. Install Driver and Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4. 2. Join a Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4. 3. Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4. 4. Uninstall Driver and Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Chapter 6. Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Chapter 7. Appendix: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 19
1
About This Guide
This guide is a complement to Quick Installation Guide. The Quick Installation
Guide instructs you on quick installation, and this guide provides the product
overview and detailed instructions for each steps.
When using this guide, please notice that features available of the adapter may
vary by model and software version. All images, steps, and descriptions in this
guide are only examples and may not reflect your actual experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Teal Contents to be emphasized and texts on the web page are in teal, including
the menus, items, buttons, etc.
Note: Ignoring this type of note might result in a malfunction or damage to the
device.
Tips: Indicates important information that helps you make better use of your
device.
*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11
specifications. Actual wireless data throughput and wireless coverage are not guaranteed and
will vary as a result of 1) environmental factors, including building materials, physical objects,
and obstacles, 2) network conditions, including local interference, volume and density of traffic,
product location, network complexity, and network overhead, and 3) AP limitations, including
rated performance, location, connection quality, and AP condition.
*To ensure compatibility, you may need to update the adapter’s drivers after an OS update.
You can find our latest drivers in the download center at https://www.tp-link.com/en/download-
center
More Info
• The latest software and utility can be found at Download Center at
https://www.tp-link.com/support.
• The Quick Installation Guide (QIG) can be found where you find this guide or
inside the package of the product.
• Specifications can be found on the product page at https://www.tp-link.com.
• A community is provided for you to discuss our products at
https://community.tp-link.com.
• Our Technical Support contact information can be found at the Contact
Technical Support page at https://www.tp-link.com/support.
3
Chapter 1 Get to Know about Your Adapter
1. 1. Product Overview
TP-Link Wireless USB Adapter connects your computer to a Wi-Fi network for
lag-free video streaming, online gaming, secure internet surfing and internet
calls.
• Compatible with 802.11a/b/g/n products
• Maximum speed of 867Mbps at 5GHz or 400Mbps at 2.4GHz network
• With super speed USB 3.0 port, the adapter experiences blazing speed data
transfers up to 10x faster than USB 2.0
• Supports ad-hoc and infrastructure mode
• Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK/WPA3
• Supports Windows, Mac and Linux
1. 2. LED Status
You can check the adapter’s working status by following the LED Explanation
table.
Status Indication
Off The driver has not been installed.
The adapter’s radio has been disabled.
Flashing Slowly The driver has been installed but no data is being transmitted or received.
Flashing Quickly Data is being transmitted or received.
Tips:
If the LED is off, try these troubleshooting tips:
Chapter 2
Connect to a Computer
This chapter introduces how to connect the adapter to your computer.
Chapter 3
Windows
This chapter introduces how to install your adapter’s driver, use your adapter
to join a wireless network, and uninstall your adapter in a Windows system.
The adapter is equipped with a Setup Wizard, which can guide you through the
installation process.
This chapter includes the following sections:
• 第 8 第第第“3. 1. Install Driver”
• Join a Wireless Network
• 第 9 第第第“3. 3. Uninstall Driver”
8
Chapter 3 Windows
3. 1. Install Driver
1. Insert the resource CD into your CD drive and run the Autorun.exe from the
pop-up Autoplay window.
Note:
1. You can also download the driver from the product’s Support page at www.tp-link.com.
2. In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually.
2. Select Archer T4U and follow the instructions to complete the installation.
Note:
If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.
3. When the following screen appears, the driver has been installed successfully.
9
Chapter 3 Windows
3. 2. Join a Wireless Network
You can join a wireless network via Windows built-in wireless utility. Follow the
instructions below to use your computer system’s built-in wireless utility:
1. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you
want to join, and click Connect. Enter the network password when prompted.
2. When the network icon changes to or , it indicates a successful network
connection.
3. 3. Uninstall Driver
The software uninstallation steps vary a bit from different systems. Please follow
the appropriate instructions for your Windows operating system: Windows
8/8.1/10/11, Windows 7.
• Windows 8/8.1/10/11
Go to Start menu to find the TP-Link application. Click
Uninstall TP-Link
Archer
T4U Driver
, then follow the on-screen instructions to complete the uninstallation.
• Windows 7
Go to Start > All Programs > TP-Link > Uninstall TP-Link
Archer T4U Driver
. Follow
the on-screen instructions to complete the uninstallation.
Chapter 4
Mac OS X
This chapter introduces how to install your adapter’s driver and utility, use your
adapter to join a wireless network, manage your adapter and uninstall your
adapter in Mac OS X.
This chapter includes the following sections:
• Install Driver and Utility
• Join a Wireless Network
• Management
• Uninstall Driver and Utility
11
Chapter 4 Mac OS X
4. 1. Install Driver and Utility
We take the steps in Mac OS X 10.10 as an example - the steps may vary slightly
for other versions of Mac OS.
Note:
Mac OS X is supported only for version 3.20 and earlier versions of this adapter.
1. Download the driver and utility from this product’s Support page from TP-
Link’s official website www.tp-link.com.
Note:
The CD is included in the package. If your computer has a CD drive, you can also run the included CD to
install the driver and utility.
2. Double click to unzip the downloaded folder and run the Install.pkg.
3. The Install TP-Link Wireless USB Adapter Utility and Driver Wizard window will
appear. Click Continue and follow the instructions to complete the installation.
12
Chapter 4 Mac OS X
4. When the following screen appears, the driver and utility have been installed
successfully. Click Restart to finish the installation.
5. After restarting the computer, the TP-Link Utility icon will appear on the
menu bar in the upper-right corner of the screen. To use the utility to join a Wi-
Fi network with your adapter, refer to Join a Wireless Network.
Note:
If the TP-Link Utility icon does not appear on the menu bar, make sure the USB wireless network
adapter is connected properly and its LED is on.
13
Chapter 4 Mac OS X
4. 2. Join a Wireless Network
Option 1
Click the TP-Link Utility icon on the menu bar, and choose a Wi-Fi network
from the list. Enter the password when prompted.
When you are connected to the internet, the network icon will change to .
Option 2
1. Click the TP-Link Utility icon on the menu bar, and then click Open
Wireless Utility at the bottom of the network list.
2. Select the network you want to join from the list and enter the password when
prompted. Click Join.
14
Chapter 4 Mac OS X
Note:
If your Wi-Fi network is not displayed in the list, you can try to join it by WPS or by clicking Join Other on the
above screen, and then follow the on-screen instructions to join the network.
4. 3. Management
TP-Link Utility provides you with an easy way to manage various connection
settings of your Wi-Fi network.
1. Click the TP-Link Utility icon on the menu bar, and then click Open
Wireless Utility at the bottom of the network list.
2. TP-Link Utility will pop up. Click the Profiles button to open the Profiles screen.
15
Chapter 4 Mac OS X
3. The Profiles screen lets you manage different Wi-Fi connection settings as
profiles so that you can connect to your network easily.
Preferred Networks displays the networks that you once connected to. The
networks’ status and information are displayed on the table.
• To join a Wi-Fi network
If you want to join a Wi-Fi network that is listed on the profile screen, select the
profile and click Apply in the bottom right corner.
• To manage an existing profile
If you want to change the wireless settings of an existing profile, select it and
then you can edit its Security and Password. If you want to delete a profile, select
it and click Remove.
4. 4. Uninstall Driver and Utility
1. Double click Uninstall.command in the downloaded folder.
16
Chapter 4 Mac OS X
2. Enter the password of you computer and when the “Uninstall Complete”
message appears, the uninstallation is complete.
Chapter 5
Linux
This chapter introduces how to install your adapter’s driver in a Linux system.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
TP-LINK AC1300 High Gain Wireless Dual Band USB Adapter Mode d'emploi
- Taper
- Mode d'emploi
dans d''autres langues
Documents connexes
-
TP-LINK tp-link AC1300 Dual Antennas High Gain Wireless USB Adapter Mode d'emploi
-
-
TP-LINK Archer T4U Plus Mode d'emploi
-
-
-
-
TP-LINK Archer T2U Nano Manuel utilisateur
-
TP-LINK Clé WiFi Puissante AC 1300 Mbps Manuel utilisateur
-
-
