LG WM4000HBA Le manuel du propriétaire

Marque: LG

Modèle: WM4000HBA

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

OWNER'S MANUAL

WASHING MACHINE

Read this owner's manual thoroughly before operating the

appliance and keep it handy for reference at all times.

ENGLISH ESPAÑOL FRANÇAIS

WM4000H*A

MFL71728908

Rev.00_070920

www.lg.com

TABLE OF CONTENTS

3 IMPORTANT SAFETY

INSTRUCTIONS

3 READ ALL INSTRUCTIONS BEFORE USE

3 WARNING STATEMENTS

5 CAUTION STATEMENTS

7 PRODUCT OVERVIEW

7 Product Features

9 INSTALLATION

9 Before Installing

10 Choosing the Proper Location

11 Unpacking and Removing Shipping Material

12 Connecting the Water Inlet Hoses

13 Connecting the Drain Hose

14 Leveling the Washer

15 Final Installation Check

17 OPERATION

17 Before Use

18 Sorting Laundry

19 Loading the Washer

20 Adding Cleaning Products

22 Control Panel

24 Wash Cycles

28 Cycle Modifiers

28 Options and Extra Functions

31 SMART FUNCTIONS

31 Using LG ThinQ Application

33 Smart Diagnosis

Function

35 MAINTENANCE

35 Regular Cleaning

35 Periodic Maintenance

39 Care in Cold Climates

41 TROUBLESHOOTING

41 Before Calling for Service

49 LIMITED WARRANTY

49 USA

52 CANADA

3IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Safety Messages

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and

follow all safety messages.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,

and tell you what may happen if the instructions are not followed.

WARNING STATEMENTS

WARNING

• To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this

product, follow basic precautions, including the following:

Installation

• Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and

safety glasses.

• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has

missing or broken parts, including a damaged cord or plug.

• Before use, the appliance must be properly installed as described in this manual.

• To reduce the risk of severe injury or death, follow all installation instructions.

• Refer to the INSTALLATION INSTRUCTIONS for detailed grounding procedures. Installation instructions

are packed with the appliance for the installer’s reference. If the appliance is moved to a new location,

have it checked and reinstalled by qualified service personnel.

• Moving or installation of the appliance requires two or more people.

• Do not install the appliance in humid spaces.

• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed

to outdoor weather conditions.

• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or

aircraft.

• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.

There is a risk of suffocation.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages

will follow the safety alert symbol and either the word WARNING or CAUTION.

These words mean:

WARNING

You may be killed or seriously injured if you do not follow instructions.

CAUTION

You may be injured or cause damage to the product if you do not follow instructions.

4 IMPORTANT SAFETY INSTRUCTIONS

• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children

might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight

chambers.

• The appliance must be installed and electrically grounded by qualified service personnel in accordance

with local codes.

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.

• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.

• This appliance must be positioned near to an electrical power supply.

• Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance.

• The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a

standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock from this appliance.

• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

• Use new hoses when connecting the washer to the water supply. Do not reuse old hoses.

Operation

• Read all instructions before using the appliance and save these instructions.

• Use this appliance only for its intended purpose.

• If the product has been submerged in water, sitting in standing water, or waterlogged, do not come in

contact with the product and immediately contact an LG Electronics Customer Information Center for

instructions before resuming use.

• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug

it immediately, and contact an LG Electronics Customer Information Center.

• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used

for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for

such a period, before using the appliance, turn on all hot water faucets and let the water flow from each

for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not

smoke or use an open flame during this time.

• Do not reach into the washer if the tub or drum, agitator, or any interior parts are moving. Before

loading, unloading, or adding items, press Start/Pause and allow the tub or drum to coast to a complete

stop before reaching inside.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning the use of the appliance by a person responsible for their safety.

• Do not allow children or pets to play on, in or with the appliance. Close supervision is necessary when the

appliance is used near children or pets.

• Keep laundry products out of children’s reach. To prevent injury to persons, observe all warnings on

product labels.

• Repair or immediately replace all power cords that have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage along its length or at either end.

• Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight

out from the outlet.

• Do not use an extension cord or adapter with this appliance.

• Do not grasp the power cord or touch the appliance controls with wet hands.

• Do not modify or extend the power cord.

• If the electrical supply cord is damaged, it must only be replaced by the manufacturer or its service agent

or a similar qualified person in order to avoid a hazard.

• Do not put oily or greasy clothing, candles or flammable materials on top of the appliance.

• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags,

etc.), gasoline, chemicals and other flammable vapors and liquids.

5IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

• Do not mix chlorine bleach with ammonia or acids such as vinegar. Follow package directions when

using laundry products. Incorrect usage can produce poisonous gas, resulting in serious injury or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the

finish.

• Do not wash laundry that has been previously cleaned in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, vegetable or cooking oil, or other flammable or explosive substances, as they give

off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash

water. These substances give off vapors that could ignite or explode.

• In the event of a gas leak (propane gas, LP gas, etc.), do not operate this or any other appliance. Open a

window or door to ventilate the area immediately.

• Do not tamper with controls.

• Fix the drain hose securely in place to avoid flooding.

• Do not abuse, sit on, or stand on the door of the appliance.

• Always check the inside of the appliance for foreign objects.

• Do not allow water, bleach or other liquids to sit in the drum for extended periods. Doing so can corrode

the drum or cause mildew or odors.

Maintenance

• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by

qualified service personnel unless specifically recommended in this owner’s manual. Use only authorized

factory parts.

• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.

Turning the controls to the OFF position does not disconnect this appliance from the power supply.

• Remove any dust or foreign matter from the power plug pins.

• Do not disassemble or repair the appliance by yourself.

• Remove the door before the appliance is removed from service or discarded to avoid the danger of

children or small animals getting trapped inside.

• Make sure the dispenser drawer or lid is closed at all times when not being filled with laundry products.

Grounding Instructions

• Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check

with a qualified electrician or service personnel if you are in doubt whether the appliance is properly

grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper

outlet installed by a qualified electrician.

• The appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least resistance for electric current. The appliance is

equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes

and ordinances.

CAUTION STATEMENTS

CAUTION

• To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or

property when using this product, follow basic precautions, including the following:

6 IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Installation

• Install the product on a firm and level floor.

Operation

• Do not place objects on top of the appliance.

• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period

of time, such as during vacations.

• ALWAYS follow the fabric care instructions supplied by the garment manufacturer.

• Use fabric softeners or products to eliminate static only as recommended by the manufacturer.

• Do not combine laundry products for use in one load unless specified on the label.

• Do not touch draining water which may be hot.

• If the drain hose and the water inlet hose are frozen in winter, defrost them before using the appliance.

• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the

appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.

• Clothing or articles that are waterproof or water resistant must be washed in the Waterproof cycle only.

(Examples include water resistant clothing, mattress covers, outdoor clothes, plastic mats.) Using

another cycle may result in personal injury or damage to the washer, clothes, walls, floor, and

surrounding objects due to abnormal vibration.

7PRODUCT OVERVIEW

ENGLISH

PRODUCT OVERVIEW

Product Features

The images in this guide may be different from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

WARNING

• For your safety and for extended product life, use only authorized components. The manufacturer is not

responsible for product malfunction, property damage or bodily injury caused by the use of separately

purchased unauthorized components, parts, or non-LG products.

Front View

a Control Panel

b Detergent Dispenser Drawer

c Door

d Drain Pump Filter

e Drain Hose

f Drain Pump Filter Cover

g Leveling Feet

h Door Seal

i Drum

Rear View

a Water Inlets

b Shipping Bolts

c Power Cord

d Drain Hose

8 PRODUCT OVERVIEW

Accessories

Included Accessories

Non-skid Pads

b Hole Caps

c Wrench

d Tie Strap

e Elbow Bracket (for securing drain hose)

Required Accessories

Hot and Cold Water Hoses

Optional Accessories

Pedestal

b Pedestal Washer

c Stacking Kit

Product Specifications

Model WM4000H*A

Electrical

Requirements

120 VAC @ 60 Hz

Min. / Max. Water

Pressure

20 - 120 psi (138 - 827

kPa)

Dimensions (Width X

Height X Depth)

27'' X 30 1/4'' X 39'' (70

cm X 77 cm X 99 cm)

Maximum Depth with

Door Open

55'' (139.6 cm)

Net Weight 187.4 lb (85 kg)

Max. Spin Speed 1300 RPM

9INSTALLATION

ENGLISH

INSTALLATION

Before Installing

Installation Overview

Please read the following installation instructions first after purchasing this washer or transporting it to

another location.

a Choosing the Proper Location

b Unpacking and Removing Shipping Material

c Connecting the Inlet Hoses

d Connecting the Drain Hose

e Leveling the Washer

f Final Installation Check

WARNING

• Moving or installation of the appliance requires two or more people. Failure to follow these instructions

may result in injury.

• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed

to outdoor weather conditions. Failure to follow this warning can cause product or part failure, serious

injury, fire, electric shock, or death.

• Properly ground the washer to conform with all governing codes and ordinances. Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

• To ensure proper airflow, do not block the large opening on the bottom of the washer with carpeting or

other materials.

• Do not remove the ground prong from the power cord. Do not use an adapter or extension cord. Plug

into a grounded 3-prong outlet. Failure to follow this warning can cause serious injury, fire, electric

shock, or death.

abc

10 INSTALLATION

WARNING

• Certain internal parts are intentionally not grounded and may present a risk of electric shock only during

servicing. Service personnel- Do not contact the following parts while the appliance is energized: pump,

valve, motor, control board.

Tools Needed

a Pliers

b Flat-Blade Screwdriver

c Level

Choosing the Proper

Location

Check the following requirements for the install

location before installing the washer.

• Allow for sufficient space between the walls and

the washer for installation.

• Make sure that the floor is clean, dry and free of

dust, dirt, water and oil so the leveling feet

cannot slide easily. Leveling feet that can move

or slide on the floor can contribute to excess

vibration and noise.

• If the floor has too much flex, reinforce it to

make it more rigid. If the floor is not solid, it may

cause severe vibration and noise.

• If a drain pan must be used, take extra care to

follow the instructions provided with the drain

pan and make sure the leveling feet are adjusted

for firm and even contact with the pan. Use of

drain pans and failure to properly level the

washer may result in increased vibration and

noise during operation.

Power Outlet

• The power outlet must be within 60 inches (1.5

m) of either side of the washer.

• Position the washer so that the outlet and plug

are easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current electrical wiring codes and regulations.

• Use a time-delay fuse or circuit breaker.

• It is the personal responsibility and obligation of

the washer owner to have a proper outlet

installed by a qualified electrician.

Flooring

• To minimize noise and vibration, install the

washer on a level, solidly constructed floor

capable of supporting the washer without

flexing or bouncing.

• The washer must be installed on firm flooring to

minimize vibration during the spin cycle.

Concrete flooring is best, but a wood floor is

sufficient, provided it is built to FHA standards.

• The floor under the washer must not slope more

than 1 inch (2.5 cm) from front to back or side to

side.

• Installing on carpeting and soft tile surfaces is

not recommended.

• Never install the washer on a platform or weakly

supported structure.

Floor Installation

To ensure sufficient clearance for water inlet

hoses, drain hose and airflow, allow minimum

clearances of at least 1 inch (2.5 cm) at the sides

and 4 inches (10 cm) behind the washer. Be sure

to allow for wall, door, or floor moldings that may

increase the required clearances.

Dimensions and Clearances

A 24 3/4'' (62.6 cm)

B 55'' (139.6 cm)

C 30 1/4'' (77 cm)

D 4'' (10 cm)

E1'' (2.5 cm)

11INSTALLATION

ENGLISH

Stacking or Pedestal Installation

The washer can be stacked under a dryer or on top

of a pedestal or pedestal washer.

NOTE

• Refer to the instructions packaged with the

optional pedestal kit before stacking appliance

on pedestal.

• Do not use a drain pan with a pedestal or

pedestal washer installation as it can block the

drawer. Using a drain pan may result in

increased vibration and noise during operation.

Unpacking and Removing

Shipping Material

Remove all shipping materials from the washer for

proper operation and inspect it for shipping

damage.

CAUTION

• Failure to remove shipping materials can cause

excessive noise and vibration.

Unpacking Shipping Material

* This feature is only available on some models.

Lift the washer off the foam base.

• After removing the carton and shipping

material, lift the washer off the foam base.

• Make sure the plastic drum support

a* comes

off with the base and is not stuck to the bottom

of the washer.

• If you must lay the washer down to remove the

carton base

b, always protect the side of the

washer and lay it carefully on its side. Do not lay

the washer on its front or back.

Removing Shipping Material

1 Remove the bolt assemblies.

• Starting with the bottom two shipping bolts

c , use the included wrench to fully loosen

all 4 shipping bolts by turning them

counterclockwise.

• Remove the bolt assemblies (bolts and

retainers) by wiggling them slightly while

pulling them out.

2 Install the hole caps.

• Locate the hole caps d included in the

accessory pack or attached to the back of

F 27'' (70 cm)

G1/4'' (0.5 cm)

Dimensions and Clearances

A 30 1/4" (77 cm)

B 4'' (10 cm)

C1'' (0.5 cm)

D 27'' (70 cm)

E 77 1/2'' (196.8 cm)

F1/4'' (0.5 cm)

Dimensions and Clearances

ABCCD

12 INSTALLATION

the washer. Install the caps in the holes left

by the bolt assemblies.

CAUTION

• Once removed, save the bolt assemblies for

future use. To prevent damage to internal

components, do not transport the washer

without reinstalling the shipping bolts. Failure to

remove shipping bolts and retainers may cause

severe vibration and noise, which can lead to

permanent damage to the washer.

NOTE

• The power cord is secured to the back of the

washer with a shipping bolt to help prevent

operation with shipping bolts in place.

Connecting the Water Inlet

Hoses

To avoid the risk of costly water damage, purchase

and install new water inlet hoses when installing

the washer.

WARNING

• Do not overtighten the hoses or cross-thread the

hose fittings. Overtightening or cross-threading

can damage the valves or couplings, resulting in

leaking and property damage.

• Do not reuse old hoses. Use only new hoses

when installing the washer. Old hoses could leak

or burst causing flooding and property damage.

Contact an LG Customer Information Center for

assistance in buying hoses.

NOTE

• Periodically check the hoses for cracks, leaks,

and wear, and replace the hoses every five years.

• Do not stretch the water hoses intentionally, and

make sure that they are not pinched, crushed or

kinked by other objects.

• Water supply pressure must be between 20 psi

and 120 psi (138 - 827 kPa). If the water supply

pressure is more than 120 psi, a pressure

reducing valve must be installed.

• Your hot water heater should be set to deliver

water at 120–135 °F (48–57 °C) to allow the

washer to properly control wash temperatures.

• Do not store or install the washer in a location

subject to freezing temperatures. Damage to the

water inlet hoses and internal mechanisms of

the washer can result. If the washer was

exposed to freezing temperatures prior to

installation, allow it to stand at room

temperature for several hours before use and

check for leaks prior to operation.

• Do not use flood-preventing hoses with auto

shut off devices. The devices can be tripped

during fill and prevent the washer from filling

properly.

How to Connect the Water Inlet

Hoses

1 Check the fittings and seals. Inspect the

threaded fitting on each hose and make sure

there is a rubber seal a in place in both ends

of each hose to prevent leaking.

2 Connect the water supply hoses.

• Connect the water inlet hoses to the hot

and cold water faucets tightly by hand and

then tighten another 2/3 turn with pliers.

• Connect the blue hose to the cold water

faucet and the red hose to the hot water

faucet.

3 Flush out the inlet hoses.

• After the hoses are connected, turn on the

water faucets and flush out any foreign

substances such as dirt, sand, or sawdust.

13INSTALLATION

ENGLISH

• Let the water drain into a bucket, and check

the water temperature to make sure you’ve

connected the hoses to the correct faucets.

4 Attach the inlet hoses to the back of the

washer.

• Attach the hot water inlet hose to the hot

water inlet on the back of the washer.

Attach the cold water inlet hose to the cold

water inlet on the back of the washer.

• Tighten the fittings securely. Turn on both

faucets all the way and check for leaks at

both ends of the hoses.

Connecting the Drain Hose

Connect the drain hose to either a standpipe or

laundry tub.

WARNING

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in flooding and property

damage.

NOTE

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the drain hose is not stretched,

pinched, crushed, or kinked.

• Do not install the drain hose with the end lower

than 29.5 inches (75 cm) or higher than 96

inches (244 cm) above the bottom of the washer

or more than 60 inches (152 cm) away from the

washer.

• Never create an airtight seal between the hose

and the drain with tape or other means. If no air

gap is present, water can be siphoned out of the

drum resulting in poor wash/rinse performance

or clothing damage.

Using a Standpipe to Drain

1 Clip the end of the hose into the elbow

bracket.

• Connect the elbow bracket a within 4

inches (10 cm) of the end of the drain hose.

If the drain hose is extended more than 4

inches (10 cm) beyond the end of the elbow

bracket, mold or microorganisms could

spread to the inside of the washer.

2 Insert the end of the drain hose into the

standpipe.

3 Use the provided tie strap b to secure the

drain hose in place.

4 If the water valves and drain are built into the

wall, fasten the drain hose to one of the water

hoses with the provided tie strap

c (ribbed

side on inside).

4 "

(10 cm)

14 INSTALLATION

Using the Laundry Tub to Drain

1 Clip the end of the hose into the elbow

bracket.

• Connect the elbow bracket a within 4

inches (10 cm) of the end of the drain hose.

If the drain hose is extended more than 4

inches (10 cm) beyond the end of the elbow

bracket, mold or microorganisms could

spread to the inside of the washer.

2 Hang the end of the drain hose over the side

of the laundry tub.

3 Use the provided tie strap to secure the drain

hose in place.

Leveling the Washer

The drum of the washer spins at very high speeds.

To minimize vibration, noise, and unwanted

movement, the floor must be a solid, level surface.

CAUTION

• Using the washer without leveling it may cause

excess vibration and noise, leading to a washer

malfunction.

• Adjust the leveling feet only as far as necessary

to level the washer. Extending the leveling feet

more than necessary can cause the washer to

vibrate.

NOTE

• Before installing the washer, make sure that the

floor is clean, dry and free of dust, dirt, water

and oil so the washer feet cannot slide easily.

Feet that move or slide on the floor can

contribute to excessive vibration and noise.

How to Level the Washer

1 Position the washer in its final location.

• Take special care not to pinch, strain, or

crush the water and drain hoses. If you have

a carpenter’s level

a, you can use it to

check that the washer is level. The slope

beneath the washer should not exceed 1

inch, and all 4 leveling feet must rest firmly

on the floor.

29.5 - 96 "

(75 - 244 cm)

29.5 - 96 "

(75 - 244 cm)

4 "

(10 cm)

15INSTALLATION

ENGLISH

2 Adjust the leveling feet.

• Turn all 4 leveling feet in one direction to

raise the washer or the other direction to

lower it.

3 Check the level again.

• Push or rock the top edges of the washer

gently to make sure the washer does not

rock. If the washer rocks, readjust the

leveling feet.

4 Tighten the locknuts b

• Turn the locknuts counterclockwise and

tighten them when the washer is level.

Using Non-Skid Pads

If you install the washer on a slippery surface, it

may move because of excessive vibration.

Incorrect leveling may cause malfunction through

noise and vibration. If this occurs, install the non-

skid pads under the leveling feet and adjust the

level.

1 Clean the floor to attach the non-skid pads.

• Use a dry rag to remove and clean foreign

objects or moisture. If moisture remains,

the non-skid pads may slip.

2 Adjust the level after placing the washer in the

installation area.

3 Place the adhesive side c of the non-skid pad

on the floor.

• It is most effective to install the non-skid

pads under the front leveling feet. If it is

hard to place the pads under the front

leveling feet, place them under the back

leveling feet.

a This side up

b Remove backing

4 Recheck the washer’s levelness.

• Push or rock the top edges of the washer

gently to make sure the washer does not

rock. If the washer rocks, level the washer

again.

Final Installation Check

Connecting to the Power Supply

Plug the washer into a 120 VAC, 60 Hz grounded 3-

prong outlet.

WARNING

• Do not use a worn or damaged power cord or

power plug. Replace or repair it immediately.

Failure to do so may result in death, fire, electric

shock, or malfunction.

• Do not modify the power cord and plug provided

with the appliance. Do not damage it when

installing or moving the appliance. Doing so may

result in death, fire, electric shock, or

malfunction.

• Make sure that the appliance is grounded.

• Connect this appliance to a grounded outlet

conforming to the rating prior to use. Failure to

do so may result in fire, electric shock, or

malfunction.

• Do not damage or cut off the ground prong of

the power cord. Doing so may cause death, fire,

electric shock, or product malfunction.

• Improper connection of the equipment

grounding conductor can result in risk of electric

shock. Check with a qualified electrician or

service technician if you are in doubt as to

whether the appliance is properly grounded. If

the plug does not fit the outlet, have a proper

outlet installed by a qualified electrician.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

16 INSTALLATION

WARNING

• Do not use an adapter or extension cord. Doing

so may result in serious injury, fire, electric

shock, or death.

• For best performance, plug the appliance into its

own individual outlet. This helps prevent

overloading house wiring circuits which could

cause a fire hazard from overheated wires.

• If necessary, use a new, UL-listed 3-prong

(grounding) plug rated at no less than the

branch circuit. Do not use an extension cord

longer than 3 feet. Failure to follow these

warnings may result in serious injury, fire,

electric shock, or death.

Testing the Washer

Check if the washer is properly installed and run a

test cycle.

1 Load the washer with 6 thick bath towels

(approximately 6 pounds).

2 Press the Power button.

3 Press the Rinse+Spin button.

4 Press the Start/Pause button to start the

wash cycle.

5 Make sure that water is supplied, that the

washer does not rock or vibrate excessively,

and that it drains well during the spin cycle.

NOTE

• If water leaks during water supply, see

Connecting the Water Inlet Hoses to connect

them properly.

• If the washer rocks and vibrates excessively, see

Leveling the Washer to level it again.

• If the drain does not work, see Connecting the

Drain Hose to install the hose properly.

17OPERATION

ENGLISH

OPERATION

Before Use

WARNING

• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before

operating this appliance.

Operation Overview

1 Sort laundry and load the washer.

• Sort laundry by fabric type, soil level, color and load size as needed. Open the door and load items

into the washer.

• If using single-use detergent packs, place pack into the drum before loading the laundry.

2 Add cleaning products.

• Add the proper amount of HE (High-Efficiency) detergent to the detergent dispenser.

• If desired, add bleach or fabric softener to the appropriate areas of the dispenser drawer.

• Do not place liquid or powdered detergent packs in the dispenser.

3 Turn on the washer.

• Press the Power button to turn on the washer.

4 Select a cycle.

• Turn the cycle selector knob or press the cycle buttons repeatedly until the desired cycle is selected.

• The preset wash temperature, spin speed, soil level and option settings for the selected cycle are

shown.

•The Normal cycle must be selected in order to change its default settings.

• Pressing the Start/Pause button without selecting a cycle immediately starts the Normal cycle with

the default settings.

5 Adjust settings.

• Default settings for the selected cycle can be changed, if desired, using the cycle modifier and

option buttons.

• Not all modifiers and options are available on all cycles. A different chime sounds and the LED does

not light up if the selection is not allowed.

6 Begin cycle.

• Press the Start/Pause button to begin the cycle. The door locks, and the washer agitates briefly

without water to measure the weight of the load.

•If the Start/Pause button is not pressed within a certain time, the washer shuts off and all settings

are lost.

7 End of cycle.

• When the cycle is finished, a melody sounds. Immediately remove the clothing from the washer to

reduce wrinkling.

18 OPERATION

• Check around the door seal when removing the load for small items that may be caught in the seal.

NOTE

• The washer rotates the laundry in a way that allows it to use less water while still fully saturating the

clothing. It is normal to be unable to see water during the wash cycle.

• If the temperature or the water level inside the machine is too high, the door will not unlock when the

Start/Pause button is pressed, and the Add Item function will not be available (on applicable models).

To stop a cycle and drain the water completely, turn the power off, then on, and then select Rinse+Spin.

Sorting Laundry

CAUTION

• Clothing or articles that are waterproof or water-resistant must be washed in the Waterproof, Bedding,

Bulky/Large, or Jumbo Wash cycle only. (Examples include water resistant clothing, mattress covers,

outdoor clothes, and plastic mats.) Failure to do so may result in personal injury or damage to the

washer, clothes, walls, floor, and surrounding objects due to abnormal vibration.

• Remove the stuffing from pillows and cushions before washing the covers. Failure to do so can cause

excessive vibration, resulting in damage to the washer, clothes, nearby objects, walls, and floor.

Grouping Similar Items

For the best washing results, and to reduce the possibility of damage to clothing, sort clothing into loads

made up of similar items.

Mixing different fabric types and/or soil levels can result in poor wash performance, color transfer,

discoloration, fabric damage or linting. Fabrics should be sorted into groups as described below.

Colors

Sort articles by color. Wash dark clothes separately from light colors or whites. Mixing dark clothes with

light clothes can result in dye transfer or discoloration of the lighter clothes.

Soil Level

Wash heavily soiled clothing together. Washing lightly soiled clothing in the same load with heavily soiled

clothing could result in poor wash performance for the lightly soiled clothing.

Fabric Type

Delicate articles should not be mixed with heavy or sturdy fabric types. Washing heavy fabrics with

delicates can result in poor wash performance for the heavy fabrics and possible damage to the delicates.

Lint Type

Some fabrics attract and bind lint to them while others give off lint in the laundry process. Avoid mixing

these lint collectors and lint producers in the same load. Mixing these fabrics will result in pilling and

linting on the lint collectors. (For example, lint collector - knit sweater; lint producer - terry cloth towels.)

How to Sort Laundry

By Colors By Soil By Fabric By Lint

White Heavy Delicates Lint Producer

Lights Normal Easy Care Lint Collector

Darks Light Sturdy

19OPERATION

ENGLISH

Fabric Care Labels

Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option

selections to care for your clothing according to the manufacturer’s recommendations.

Loading the Washer

CAUTION

• Clothing or articles that are waterproof or water-

resistant must be washed in the Waterproof,

Bedding, Bulky/Large, or Jumbo Wash cycle

only. (Examples include water resistant clothing,

mattress covers, outdoor clothes, and plastic

mats.) Failure to do so may result in personal

injury or damage to the washer, clothes, walls,

floor, and surrounding objects due to abnormal

vibration.

General Tips

• Check and empty pockets. Paper clips, coins,

matches, etc.can damage clothing and the

washer.

• Close zippers and hooks, and tie drawstrings to

prevent snagging or tangling of clothes.

• Pretreat heavily stained areas for best results.

• Brush off heavy soil, dust, and hair from items

before washing. Excess dirt or sand can abrade

other fabrics and lead to poor wash

performance.

• For best performance, load clothes as shown.

- Do not press down on items while stacking

them in the drum.

- Load clothes loosely, and do not overfill the

drum. Clothes need room to circulate in order

to get clean.

• Combine large and small items in the drum.

Load large items first. Large items should not be

more than half of the total load.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer must close easily.

• The washer will not fill or operate with the door

open.

Category Label Directions

Washing

Hand wash

Machine wash, Normal cycle

Perm Press/Wrinkle Resistant setting (which has a cool down or cold

spray before the slower spin)

Gentle/Delicate setting (slow agitation and/or reduced wash time)

Do not wash

Do not wring

Water Temperature

Hot

Warm

Cold/Cool

Bleach Symbols

Any bleach (when needed)

Only non-chlorine bleach (when needed)

Do not bleach

20 OPERATION

Bulky Items

• Wash thick, bulky items individually. Heavy

blankets, comforters, bedspreads, or pet beds

can get tangled or cause an unbalanced load if

combined with other items.

Small Items

• Do not wash a single small item. Add enough

similar items to the load to prevent an out-of-

balance load.

• Wash small, light items in a mesh bag. Small

items can get caught in the impeller at the

bottom of the drum, and brassiere hooks can

snag on other clothing or the drum.

Adding Cleaning Products

About Detergent Use

This washer is designed for use with only HE (High-

Efficiency) detergents.

• HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of

the washer clean. Using detergent that is not HE

may cause oversudsing and unsatisfactory

performance which could result in error codes,

cycle failure, and washer damage.

• Detergents designated as HE-compatible may

not provide optimal results.

• For proper wash performance, always measure

detergent using the measuring device provided

by the detergent manufacturer. For an average

load, use less than half of the recommended

maximum. Use less detergent for soft water,

light soil, or smaller loads.

• Use extra care when measuring 2X and 3X

concentrated detergents because even a small

amount of extra detergent can lead to problems.

• Never use more than the maximum amount of

detergent recommended by the manufacturer.

Using too much detergent can lead to

oversudsing, poor rinsing, detergent buildup in

clothing, and residue buildup that can contribute

to odors in the washer.

• Do not use more than one single-use detergent

pack in the washer. Using too much detergent

may cause oversudsing and unsatisfactory

performance. Reduce detergent amount or add

an extra rinse if detergent residue is left on

fabrics. To add an extra rinse, select the Extra

Rinse option.

a Maximum fill line

b Average load fill line

c Liquid detergent

d Powdered detergent

Single-Use Detergent Packs

Place liquid or powdered detergent packs in the

drum before loading laundry. Do not place

detergent packs in the dispenser.

Using the Dispenser

To add cleaning products to the automatic dispenser:

1 Open the dispenser drawer.

2 Load the laundry products into the

appropriate compartments.

• Follow the manufacturer’s recommendations

when adding cleaning products.

a Pre-wash detergent compartment (on

some models)

b Liquid detergent cup

c Main wash detergent compartment

d Liquid fabric softener compartment

e Liquid chlorine bleach compartment

La page charge ...

LG WM4000HBA Le manuel du propriétaire

Marque: LG

Modèle: WM4000HBA

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG WM4000HBA Owner's manual
español: LG WM4000HBA El manual del propietario

Documents connexes

LG WM3450CW Le manuel du propriétaire