Bosch HES3053U/10 Le manuel du propriétaire

Table of Contents

About This Manual ....... 1

How This Manual is Organized .......... 1

Safety .................. 2

important Safety instructions ........... 2

Getting Started .......... 5

Parts ............................... 5

Accessories ......................... 6

Control ............................. 7

Before Using the Oven for the First Time . 8

Getting the Most Out of Your

Appliance ............... 9

General Tips ......................... 9

Preheating the Oven ................... 9

Adjusting the Oven Temperature .......... 9

Rack Positions ....................... 10

Operation .............. 11

About the Appliance ................... 11

Operating the Oven .................. 11

Bake ............................... 11

Broil ................................ 13

Convection .......................... 13

Operating the Cooktop ................ 14

Using Proper Cookware ................ 15

About the Ceramic Glass Cooktop ....... 15

Types of Cooktop Elements ............. 15

Suggested Radiant Element Settings ...... 16

Single Radiant Surface Elements ......... 16

Dual Radiant Surface Elements .......... 17

Keep Warm .......................... 17

Settings ............................ 18

Setting the Clock ..................... 18

Temperature Conversion ............... 19

Setting a Silent Control Panel ............ 19

Setting Oven Lockout .................. 19

Setting the Minute Timer ................ 19

Cleaning and Maintenance 21

Cleaning ........................... 21

Self-Clean .......................... 21

Avoid These Cleaners ................. 22

Cleaning Guide ...................... 22

Cooktop Cleaning and Maintenance ....... 23

Maintenance ........................ 24

Replacing an Oven Light ............... 24

Removing the Oven Door .............. 25

Service ................ 27

Before Calling Service ................ 27

Troubleshooting Chart ................. 27

Data Plate .......................... 29

How to Obtain Service or Parts .......... 29

STATEMENT OF LIMITED PRODUCT

WARRANTY ........................ 30

BSH Home Appliances Corporation

1901 Main Street, Suite 600

Irvine, CA 92614

Questions?

1-800-944-2904

www.boschappliances.com

We look forward to hearing from you!

About This ual

How This Manual is Organized

You can get the most out of your new oven by reading this

manual from beginning to end. This way, you will

systematically get to know your appliance and become

familiar with its operation and features.

The manual consists of the following sections:

• The "Safety' section provides information on how to

safely operate your oven.

• "Getting Started' introduces you to the oven

components and features.

• The "Operation" section offers you step-by-step

instructions on how to operate your oven.

• In "Getting the Most Out of YourAppliance" you can

find a list of many common foods with the appropriate

oven mode, temperature, rack position and bake time.

This section also provides you with several bakeware

and preparation tips.

• "Cleaning and Maintenance" provides you with

information on how to clean and care for the various

oven parts.

• The "Service" section includes your warranty and do-it-

yourself troubleshooting tips.

• Pay special attention to the important safety

instructions in the "Safety' section.

English 1

Safety

important Safety instructions

READ AND SAVE TH ESE INSTRUCTIONS

WARNING:

When properly used and cared for, your new

appliance has been designed to be safe and

reliable. Read all instructions carefully before

use. These precautions will reduce the risk of

burns, electric shock, fire and injury to

persons. When using kitchen appliances,

basic safety precautions must be followed,

including those in the following pages.

Proper Installation and Maintenance

Have the installer show you the location of the circuit

breaker or fuse. Mark it for easy reference.

This appliance must be properly installed and grounded by a

qualified technician. Connect only to a properly grounded

outlet. Refer to the Installation Instructions for details.

_lk WARNING

Tip Over Hazard

_lb • A child or adult can tip the

range and be killed.

• Verify the anti-tip device has

been installed.

Ensure the anti-tip device is re-engaged

when the range is moved.

• Do not operate the range without the anti=tip

device in place.

• Failure to follow these instructions can

result in death or serious burns to children

and adults.

Range ._..

leveling leg Ji_"_T_

_) _S_--Anti-tip

d_-_'_ bracket

To check if the anti=tip bracket is installed properly, use

both arms and grasp the rear edge of range back. Carefully

attempt to tilt range forward. When properly installed, the

range should not tilt forward.

Refer to the anti-tip bracket installation instructions

supplied with your range for proper installation.

English 2

This appliance is intended for normal household use only. It

is not approved for outdoor or other non-household uses

(including sea or air-going vessels). See the Statement of

Limited Warranty. If you have any questions, contact the

manufacturer.

Do not store or use corrosive chemicals, vapors, flammables

or nonfood products in or near this appliance. The use of

corrosive chemicals in heating or cleaning will damage the

appliance and could result in injury. This appliance is

intended only for heated food preparatoin and should not be

used for any other purposes.

Do not operate this appliance if it is not working properly, or

if it has been damaged. Contact an authorized servicer.

Do not obstruct oven vents.

Do not repair or replace any part of the appliance unless

specifically recommended in this manual. Refer all servicing

to a factory authorized service center.

In the event of an error, the display flashes and beeps

continuously. If this happens during self-clean, disconnect

appliance from the power supply and call a qualified

technician.

In the event of an error, the display flashes and beeps

continuously. Disconnect appliance from the power supply

and call a qualified technician.

Fire Safety

Do not use aluminum foil or protective liners to line any part

of the appliance, especially the oven bottom. Installing these

liners may result in risk of electric shock or fire.

If materials inside an oven should ignite, keep door closed.

Turn off the appliance and disconnect the circuit at the circuit

breaker box.

Use this appliance only for its intended purpose as

described in this manual. For example, never use the

appliance for warming or heating the room. Never use the

appliance for storage.

Always have a working smoke detector near the kitchen.

In the event that personal clothing or hair catches fire, drop

and roll immediately to extinguish flames.

Have an appropriate fire extinguisher available, nearby,

highly visible and easily accessible near the oven.

Smother flames from food fires other than grease fires with

baking soda. Never use water on cooking fires.

,_ WARNING:

TO REDUCE THE RISK OF PERSONAL

INJURY IN THE EVENT OF A GREASE FIRE,

OBSERVE THE FOLLOWING:

• SMOTHER FLAMES with a close-fitting

lid, cookie sheet, or metal tray, then turn

off the burner. EXERCISE CAUTION TO

PREVENT BURNS. If the flames do notgo

out immediately, EVACUATE AND CALL

THE FIRE DEPARTMENT.

• NEVER PICK UP A FLAMING PAN--You

may be burned.

• DO NOT USE WATER, including wet rags

or towels--a violent steam explosion will

result.

• Use an extinguisher ONLY if:

1) You know you have a CLASS ABC

extinguisher and you already know

how to operate it.

2) The fire is small and contained in the

area where it started.

3) The fire department is being called.

4) You can fight the fire with your back to

an exit.

Burn Prevention

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN -- Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing, potholders, or other

flammable materials contact heating elements or interior

surfaces of oven until they have had sufficient time to cool.

Other surfaces of the appliance may become hot enough to

cause burns. Among these surfaces are oven vent

openings, surfaces near these openings and oven doors.

Exercise caution when opening the appliance. Standing to

the side, open the door slowly and slightly to let hot air and/

or steam escape. Keep your face clear of the opening and

make sure there are no children or pets near the unit. After

the release of hot air and/or steam, proceed with your

cooking. Keep doors shut unless necessary for cooking or

cleaning purposes. Do not leave open doors unattended.

Do not heat or warm unopened food containers. Build-up of

pressure may cause the container to burst and cause injury.

Use caution when cooking foods with high alcohol content

(e.g. rum, brandy, bourbon) in the oven. Alcohol evaporates

at high temperatures. There is a risk of burning as the alcohol

vapors may catch fire in the oven. Use only small quantities

of alcohol in foods, and open the oven door carefully.

Always place oven racks in desired location while oven is

cool. If a rack must be moved while oven is hot, do not let

potholder contact the heating elements.

Always use dry potholders. Moist or damp potholders on hot

surfaces may result in burns from steam. Do not let potholder

touch hot heating elements. Do not use a towel or other bulky

cloth.

Secure all loose garments, etc. before beginning. Tie long

hair so that it does not hang loose, and do not wear loose

fitting clothing or hanging garments, such as ties, scarves,

jewelry, or dangling sleeves.

Child Safety

When children become old enough to use the appliance, it is

the legal responsibility of the parents or legal guardians to

ensure that they are instructed in safe operation of the

appliance by qualified persons.

Do not allow anyone to climb, stand, lean, sit, or hang on any

part of an appliance, especially a door, warming drawer or

storage drawer. This can damage the appliance, and the unit

may tip over, potentially causing severe injury.

Do not allow children to use this appliance unless closely

supervised by an adult. Children and pets should not be left

alone or unattended in the area where the appliance is in

use. They should never be allowed to play in its vicinity,

whether or not the appliance is in use.

CAUTION:

Items of interest to children should not be stored in an

appliance, in cabinets above an appliance or on the

backsplash. Children climbing on an appliance to reach items

could be seriously injured.

Cleaning Safety

Do not clean the appliance while it is still hot. Some cleaners

produce noxious fumes when applied to a hot surface. Wet

cloths or sponges can cause burns from steam.

IMPORTANT SAFETY NOTICE: The California Safe

Drinking Water and Toxic Enforcement Act requires the

Governor of California to publish a list of substances known

to the state to cause cancer, birth defects or other

reproductive harm, and requires businesses to warn

customers of potential exposure to such substances.

The burning of gas cooking fuel and the elimination of soil

during self-cleaning can generate some by-products which

are on the list. To minimize exposure to these substances,

always operate this unit according to the instructions

contained in this booklet and provide good ventilation.

English 3

When self-cleaning, confirm that the door locks and will not

open. If the door does not lock, stop self clean operation and

contact service.

Wipe out excessive spillage before self-cleaning the oven.

Birds have very sensitive respiratory systems. Keep pet birds

out of the kitchen or other rooms where kitchen fumes could

reach them. During self-clean, fumes are released that may

be harmful to birds. Other kitchen fumes such as overheating

margarines and cooking oils may also be harmful.

Keep oven free from grease build up.

Cookware Safety

Do not place food directly on oven bottom.

Follow the manufacturer's directions when using cooking or

roasting bags.

Do not clean parts or accessories in the self-clean oven.

English 4

Getti Started

Parts

Oven Vent

Door Lock

¢} Bose.

Control Panel

Convection Fan

Rack Position Guides

with 7 Rack Positions

Door Hinge

Oven Bottom

Oven Vent

The oven vent is located under the left side of the control

panel. When the oven is on, warm air passes through this

vent. This venting is necessary for proper air circulation in

the oven and good baking results. Do not block the oven

vent since it is important for air circulation. It is normal to

see steam escaping from the vent, and condensation may

collect in this area. This area may be warm when the oven

is in use.

Convection Fan (some models)

The convection fan operates during the convection mode.

When the oven is operating in a convection mode, the fan

turns off automatically when the door is opened.

English 5

Oven Bottom

The oven bottom conceals the lower heating element. As a

result the element is protected from damage and spills.

Note:

Do not place food directly on the oven bottom.

,_ WARNING:

Do not use aluminum foil or protective liners

to line any part of the appliance, especially

the oven bottom. Installation of these liners

may result in a risk of electric shock or fire.

Accessories

Rack

Flat Oven Rack

This rack can be used for

all cooking needs. Do not

clean in the self-clean

oven. Your oven comes

with two flat oven racks.

,_ CAUTION:

To avoid burns, place oven racks in desired

positions before turning oven on. Always use

oven mitts when the oven is warm. If a rack

must be moved while the oven is hot, do not

let oven mitts contact hot heating elements.

Use caution when removing oven racks from

the lowest rack position to avoid contact with

the hot oven door.

To avoid possible injury or damage to the

appliance, ensure racks are installed exactly

per installation instructions and not

backwards or upside down.

REMOVE ALL OVEN RACKS and parts

before starting a self-clean cycle. If the

oven racks are left in the oven and remain in

the oven cavity for a self-clean cycle, the

glide ability of the oven rack system will be

damaged and will cause all oven racks to

loose their shiny finish and or turn blue.

Remove ALL oven racks and clean

according to instructions provided in the Care

& Cleaning section of this manual.

Removing and Replacing Oven Racks

To remove, pull the rack forward until it stops. Lift up front

of rack and slide out. To replace, fit the rack onto the

guides on the oven walls. Tilt the front of the rack upward

and slide the rack back into place.

English 6

Control

300 Series (models without convection bake)

@ @

Oven Cook

Clock

Light Time

÷ @ @

Self Timer Start

Clean On/Off Time

@ Oven

@ Preheat

@ DoorLocked

@ @

Bake Broil

@

Clear

Lock

/Off

500 Series

models with convection bake)

@ @

Oven Cook

Clock

Light Time

@ @ @

Self Timer S[ar[

Clean On/Off Time

@ Oven

@ Preheat

@ DoorLocked

@ @

Bake Broil

Clear

Convection

/Off

English 7

Control Keypads Control Indicator Lights

Oven

Light

Use to turn the interior oven light ON

or OFF.

Clock

Use to set the time of day.

Used to enter the length of cooking

time needed.

Self

Clean

Use to set a Self-Clean cycle.

Timer

On/Off

Use to set or cancel the minute timer.

The minute timer does not start or

stop cooking.

Use to select the bake feature.

Bake

Broil

Use to select the variable broil

feature.

Lock

Door Lock icon pad activates oven

door lockout settings.

Convection

Convection is similar to Bake. Heat

comes from the lower burner and the

heat is circulated by a convection fan

(some models).

Use with the feature or function pads

to set oven temperature, bake time,

start time (when programming an

automatic start time), setting or

adjusting the clock and minute timer.

@ Oven

@ Preheat

@ Door Locked

Light will glow each time the oven

turns on to maintain the set oven

temperature.

Light will glow when the oven is first

set to operate, or if the desired

temperature is reset higher than the

actual oven temperature.

Light will flash when the oven door

locks and unlocks, the oven door

lockout is active or when the Self-

Clean cycle feature is active.

Note: All other indicator lights on the oven control are fea-

ture ON/OFF indicator lights.

Before Using the Oven for the

First Time

Oven must be properly installed by a qualified

technician before use.

Remove all packing materials from inside and outside

the oven.

• While cool, wipe with a clean, damp cloth and dry.

• There may be a slight odor during first uses; this is

normal and will disappear.

• Optimum cooking results depend on proper cookware

being used.

• Read and understand all safety precautions and Use

and Care Manual information prior to operating.

English 8

Getti t e ost Out of Your Appliance

General Tips

Pan Placement

Baking results are better if pans are placed in the center of

the oven. If baking more than one pan on a rack, allow at

least 1" to 1 ½" of air space around the pan. When baking

four cake layers at the same time, stagger pans on two

racks so that one pan is not directly above the other. See

Baking Layer Cakes with 1 or 2 racks.

Baking Pans and Dishes

• Glass baking dishes absorb heat. Follow

manufacturers' recommendations.

• For tender, light, golden brown crusts, use light, shiny

metal bakeware.

Dark, rough or dull pans (nonstick or anodized) will

absorb heat and result in a browner, crisper crust.

Some manufacturers recommend reducing the

temperature 25 °F when using this type of pan. Follow

manufacturers' recommendations.

• Insulated cookie sheets or bakeware may increase the

length of cooking time.

• Do not set any heavy objects on the open oven door.

• Do not keep the empty bakeware in the oven during

cooking as this changes cooking performance.

Aluminum Foil

Do not use aluminum foil or protective liners to line any part

of the appliance, especially the oven bottom. Installing

these liners may result in risk of electric shock or fire.

Preheating the Oven

• Place oven racks in desired position before heating the

oven.

• Preheat the oven in all cooking modes.

• Allow oven to preheat while preparing recipe

ingredients or food items.

• Setting a higher temperature does not shorten preheat

time.

• Once oven is preheated, place food in the oven as

quickly as possible to minimize the loss of heat and

reduction of oven temperature.

Adjusting the Oven Temperature

Your appliance has been factory calibrated and tested to

ensure an accurate baking temperature. For the first frew

uses, follow your recipe times and temperature

recommendations carefully. If you think that the oven is

cooking too hot or too cool for your recipe times, you can

adjust the control so that the oven cooks hotter or cooler

than the temperature displayed.

To adjust oven temperature:

1. Press "BAKE".

2. Set the temperature to 550°F (287°C) by pressing and

holding the "+".

3. Within 2 seconds, press and hold "BAKE" until the 2

digit display appears. Release "BAKE". The display

now indicates the amount of degrees offset between

the original factory temperature setting and the current

temperature setting. If the oven control has the original

factory calibration, the display will read "0".

4. The temperature can now be adjusted up or down 35°F

(19°C), in 5°F steps by pressing and holding the "+" or

"=". Adjust until the desired amount of offset appears in

the display. When lowering the oven temperature, a

minus sign (=)will appear before the number to indicate

that the oven will be cooler by the displayed amount of

degrees.

5. When you have made the desired adjustment, press

"Clear/Off" to go back to the time of day display.

For Best Results

• Open the door as briefly as possible to avoid

temperature reduction.

• Use the interior oven light to view the food through the

oven window rather than opening the door frequently.

• Use the Timer to keep track of cooking times.

High Altitude Baking

• When cooking at high altitudes, recipes and cooking

times will vary.

For accurate information, write the Extension Service,

Colorado State University, Fort Collins, Colorado

80521. There may be a cost for the guides. Specify

which high altitude food preparation guide you prefer:

general information, cakes, cookies, breads, etc.

English 9

Condensation

It is normal for certain amount of moisture to evaporate

from the food during any cooking process. The amount

depends on the moisture content of the food. The

moisture may condense on any surface cooler than the

inside of the oven, such as the control panel.

Operating the Oven Light

The interior oven light will automatically turn ON when the

oven door is opened.

Press "Oven Light" to turn the interior oven light ON and

OFF whenever the oven door is closed.

The interior oven light is located at the upper left rear wall

of the oven interior and is covered with a glass shield held

by a wire holder. The glass shield must be in place

whenever the oven is in use.

To change the interior oven light, see Replacing an Oven

Light in the Maintenance section.

Recommended Rack Positions for Broiling, Baking &

Roasting

Food Rack Position

Broiling hamburgers and 6 or 7

steaks

Broiling meats, chicken or 5 or 6

fish

Cookies, cakes, pies, 4 or 5

biscuits and muffins

Frozen pies, angel food 2 or 3

cake, yeast, bread,

casseroles, small cuts of

meat or poultry

Turkey or ham 1

Rack Positions

English 10

Operation

About the Appliance

Behind the classic design is modern and perfected

technology that ensures a high degree of efficiency. For

instance, we have further improved the distribution of heat

in the oven by using newly designed elements. The

advantage of this results in shorter cooking times, perfect

results and lower energy costs.

This oven is very convenient and easy to operate, even

with the wide variety of options. The cooking mode and

temperature can be adjusted with very little effort. The

additional functions such as Cook Time can be set at the

touch of a button in just a few seconds, and the display

always presents the most important information while you

are cooking.

Operating the Oven

Baking layer cakes with 1 or 2 oven racks

For best results when baking cakes using 2 oven racks,

place bakeware on rack positions 2 & 5 (See Fig. 2). For

best results when using a single oven flat rack, place

bakeware on rack positions 3 or 4 (See Fig. 1).

Bake

BAKE

Bake is cooking with dry, heated air.

Both the upper and lower elements

cycle to maintain the oven

temperature.

The Bake mode can be used to prepare a variety of food

items, from pastries to casseroles. Refer to recipe or

package directions for oven temperature and baking time.

Tips

• Preheat the oven if the recipe recommends it.

• Baking time will vary with the size, shape and finish of

the bakeware. Dark metal pans or nonstick coatings

will cook faster with darker results. Insulated bakeware

will lengthen the cook time for most foods.

• For best results, bake food on a single rack with at

least 1-11/2'' space between pans or dishes and oven

wails.

• Eliminate heat loss from the oven by using the window

to periodically check food for doneness instead of

opening the door.

If multiple racks are necessary, use a maximum of 2 racks.

For cakes use rack positions 2 and 5, for cookies use rack

positions 1 and 4. Stagger pans so that one is not directly

above the other (see graphic below). See "Pan Placement"

under "General Tips" for more info. You may also consider

using a convection mode.

Fig. 1 Fig. 2

The oven can be programmed to bake at any temperature

from 170°F to 550°F (77°C to 287°C). The factory preset

automatic bake temperature is 350°F (177°C).

To set bake

1. Press "BAKE". "------

" appears in the display.

English 11

2. Within5seconds,pressthe"+"or"-".Thedisplaywill

show"350°F(177°C).''Bypressingandholdingthe"+"

or"-",thetemperaturecanthenbeadjustedin5°F

increments(1°CifthecontrolissettodisplayCelsius).

3. Assoonasthe"+"or "-"padisreleased,theovenwill

beginheatingtotheselectedtemperature.Whenthe

displayedtemperaturereachesthedesiredbaking

temperature,thepreheatindicatorlightwillturnOFF

andthecontrolwillbeep3times.

4. Tocancelbake,press"Clear/Off".

To change the oven temperature after bake has

started:

1. Press "BAKE". Visually check the bake temperature

and that it needs to be changed.

2. Press the "+" or "-" pad to increase or decrease the set

temperature to the desired new oven temperature.

Note: The OVEN indicator light on the electronic display

will turn ON and OFF when using the Bake feature and

during preheat. This is normal and indicates that the

oven is cycling to maintain the selected baking

temperature. When the preheat indicator light turns

OFF, your oven is ready.

Setting timed bake and delayed timed

bake features

The "BAKE" and "START TIME" pads operate the features

that will turn the oven ON and OFF at the times you select

in advance. The oven can be programmed to start

immediately and shut off automatically (timed bake) or to

begin baking at a later time with a delayed start time

(delayed timed bake).

To program the oven to begin baking immediately and

to shut off automatically (timed bake)

1. Be sure that the clock shows the correct time of day.

2. Place the food in the oven.

3. Press "BAKE". "m m _ o,,appears in the display.

4. Within 5 seconds, press the "+" or "-". The display will

show "350°F (177°C). '' By holding the"+" or "-", the

temperature can then be adjusted in 5°F increments

(1°C if the control is set to display Celsius).

5. Press "COOK TIME". ":00" will flash in the display.

6. Press the "+" or "-" until the desired baking time

appears in the display.

7. The oven will turn ON and begin heating.

To program oven for a delayed start time and to shut-

off automatically (delayed Timed Bake):

1. Be sure that the clock shows the correct time of day.

2. Place the food in the oven.

3. Press "BAKE". ..... appears in the display.

4. Within 5 seconds, press the "+" or "-". The display will

show "350°F (177°C). '' By holding the "+" or "-", the

temperature can then be adjusted in 5°F increments

(1°C if the control is set to display Celsius).

5. Press "COOK TIME". ":00" will flash in the display.

6. Press the "+" or "-" until the desired baking time

appears.

7. Press "START TIME". The earliest possible start time

will appear in the display.

8. Press the "+" or "-" until the desired start time appears

in the display.

9. Once the controls are set, the control calculates the

time when baking will stop in order to start at the time

you have set.

10. The oven will turn ON at the delayed start time and

begin heating.

When the set bake time runs out

1. "END" will appear in the display window and the oven

will shut-off automatically.

2. The control will beep 3 times every 60 seconds as a

reminder until "Clear/Off" is pressed.

To change the oven temperature or bake time after

baking has started

1. Press the function pad you want to change.

2. Press the "+" or "-" to adjust the setting.

Note: During timed bake the preheat indicator light will not

function until the set time to start cooking is reached.

CAUTION:

Use caution with the timed bake and delayed

timed bake features. Foods that can easily

spoil such as milk, eggs, fish, meat or poultry,

should be chilled in the refrigerator first.

Even when chilled, they should not stand in

the oven for more than 1 hour before cooking

begins, and should be removed promptly

when cooking is completed.

English 12

Broil

BROIL Broil uses intense heat radiated from

the upper element.

The Broil mode is best suited for cooking thin, tender cuts

of meat (1" or less), poultry and fish. It can also be used to

brown breads and casseroles. Always broil with the door

open.

The benefits of broiling include:

• Fast and efficient cooking.

• Cooking without the addition of fats or liquids.

Tips:

• Preheat oven for approximately 5 minutes.

• Steaks and chops should be at least ¾" thick.

• Brush fish and poultry with butter or oil to prevent

sticking.

• Turn meats once during the recommended cooktime.

When top browning casseroles, use only metal or glass

ceramic dishes such as Corningware®.

Use the broil feature to cook meats that require direct

exposure to radiant heat for optimum browing results.

When broiling always remember to arrange the oven racks

while oven is still cool. Position the rack as suggested in

the broil settings table.

Broil Oven Rack Position Table

Food Rack Position

Medium or well-done 7

hamburgers

Fish, medium steaks & 6

pork chops

Well-done foods such as 5

chicken

approximately 5 minutes before adding food,

5. Open the oven door to the broil stop position when

broiling.

6. Broil on one side until food is browned. Turn and broil

food on 2nd side.

7. When broiling is finished press "Clear/Off".

Note: Always pull the oven rack out to the stop position

before turning or removing the food.

CAUTION:

Should an oven fire occur, close the oven

door and turn the oven OFF. If the fire

continues, use a fire extinguisher. DO NOT

put water or flour on the fire. Flour may be

explosive.

Convection (some models)

CONVECTION

Convection is similar to Bake. Heat

comes from the upper and lower

heating elements. The main

difference in convection baking is that

the heat is circulated throughout the

oven by the convection fan.

Convection feature benefits

• Foods may cook up to 25 to 30% faster, saving time

and energy.

• Multiple rack baking.

• No special pans or bakeware needed.

How Convecton works

Convection uses a fan to circulate the oven's heat

uniformly and continuously around the oven. This improved

heat distribution allows for fast, even cooking and browning

results. It also gives better baking results when using two

racks at the same time.

To set Broil

1. Arrange the oven rack while oven is still cool.

2. Press "BROIL". "= = "will appear in display.

3. Press and hold the "+" or "="until the desired broil

setting level appears in the display. Press the "+" for HI

broil or the "-" for LO broil. Most foods may be broiled

at the HI broil setting. Select the LO broil setting to

avoid excess browning or drying of foods that should

be cooked to the well-done stage.

4. For optimum browning, preheat broil element for

Heated air flows around the food from all sides, sealing in

juices and flavors. Meats cooked with convection are

juicier. Poultry is crisp on the outside while staying tender

and moist on the inside. Breads and pastries brown more

evenly. Most foods baked in a standard oven can be

cooked faster and more evenly with Convection.

English 13

How to use Convection

When baking:

1. For optimum cooking results it is recommended to

preheat the oven when baking foods such as cookies,

biscuits and breads.

2. Reduce oven temperature 25°F from recipe's

recommended oven temperature. Follow the remainder

of the recipe's instructions using the minimum

recommended cooktime.

3. When using 2 oven racks at the same time, place in

positions 2 & 5 for best results.

Layer cakes will have better results using the "BAKE" pad.

When roasting

1. Preheating is not necessary when roasting foods using

Convection.

2. Since Convection cooks food faster, reduce the

cooktime by 25% from the recommended cook time of

your recipe. Check the food at this time. If necessary,

increase cooktime until the desired doneness is

obtained.

3. Do not cover foods when roasting - this will prevent the

meat from browning properly.

4. Use the same temperature as indicated in the recipe.

Note:

When using Convection, cook time reductions may vary

depending on the amount and type of food being cooked.

Setting Convection

The oven can be programmed to Convection at any

temperature from 170°F to 550°F (77°C to 287°C). The

factory preset automatic bake temperature is 350°F

(177°C).

1. Press "Convection". .... appears in the display.

2. Within 5 seconds, press the "+" or "=". The display will

show "350°F (177°C). '' By pressing and holding theor,

the temperature can then be adjusted in 5°F

increments (1°C if the control is set to display Celsius).

3. As soon as the"+" or "-" pad is released, the oven will

begin heating to the selected temperature. When the

displayed temperature reaches the desired baking

temperature, the preheat indicator light will turn OFF

and the control will beep 3 times.

4. To cancel Convection, press "Clear/Off".

To change the oven temperature after Convection has

started:

1. Press "Convection". Visually check the bake

temperature and see if it needs to be changed.

2. Press the "+" or "-" pad to increase or decrease the set

temperature to the desired new oven temperature.

Operating the Cooktop

Cookware material types

The cookware material determines how evenly and quickly

heat is transferred from the surface element to the pan

bottom. The most popular materials available are:

Aluminum =Excellent heat conductor. Some types of food

will cause it to darken (Anodized aluminum cookware

resists staining & pitting). If aluminum pans slide across the

ceramic cooktop, they may leave metal marks which will

resemble scratches. Remove these marks immediately.

Copper =Excellent heat conductor but discolors easily.

May leave metal marks on ceramic glass (see Aluminum).

Stainless =Slow heat conductor with uneven cooking

results. Is durable, easy to clean and resists staining.

Cast Iron =A poor heat conductor however will retain heat

very well. Cooks evenly once cooking temperature is

reached. Not recommended for use on ceramic cooktops.

Porcelain=enamel on metal =Heating characteristics will

vary depending on base material. Porcelain-enamel

coating must be smooth to avoid scratching ceramic

cooktops.

Glass =Slow heat conductor. Not recommended for

ceramic cooktop surfaces because it may scratch the

glass.

To set Convection:

English 14

Using proper cookware

The size and type of cookware used will influence the

setting needed for best cooking results. Be sure to follow

the recommendations for using proper cookware as

illustrated in Figs. 1 & 2.

Cookware should have flat bottoms that make good contact

with the entire surface heating element (See Fig. 2). Check

for flatness by rotating a ruler across the bottom of the

cookware (See Fig. 1). For more information about the

ceramic cooktop see "Cooktop Cleaning & Maintenance" in

the General Care & Cleaning section.

Fig. 1

The type and size of cookware, the number of surface

elements in use and their settings are all factors that will

affect the amount of heat that will spread to areas beyond

the surface elements. The areas surrounding the elements

may become hot enough to cause burns.

Element ON and Hot Surface Indicator

Lights

Your appliance is equipped with two different types of

radiant surface control indicator lights that will glow on the

backguard -- the Element On indicator light and the Not

Surface indicator lights.

The Element ON indicator lights are located on the

control panel above each radiant element control knob and

will glow when a surface element is turned ON. A quick

glance at this indicator light after cooking is an easy check

to be sure ALL surface controls are turned OFF. The Hot

Surface indicator light located on the control panel will

glow when any surface cooking area heats up and will

remain on until the glass cooktop has cooled to a

MODERATE level.

Good Cookware Poor Cookware

o

®

11" t

Flat bottom and straight

sides,

Tight fitting lids,

Weightof handledoes

nottilt pan.Panis well

balanced,

• Curvedandwarpedpan,

o Pan largerthan cookingarea

marked on cooktop by more

than one-half inchor 12mm.

Pan sizes match the

amount of food to be

prepared and the size of o Heavy handle tilts pan,

the surface element.

Made of a material that

conducts heat well,

Easyto clean, e Panis smaller or larger

Always match pot than heating area marked

diameter to element size. on cooktop. Fig. 2

About the ceramic glass cooktop

The ceramic cooktop has radiant surface elements located

below the surface of the glass. The design of the ceramic

cooktop outlines the area of the surface element

underneath. Be sure to match the pan size with the

diameter of the element outline on the cooktop and only

flat-bottomed cookware should be used.

Element ON Indicator Lights

©

SIM

__ @ _ Hot Surface

OFF

MED

Note:

Radiant elements have a limiter that allows the element

to cycle ON and OFF, even at the HI setting. This helps

to prevent damage to the ceramic smoothtop. Cycling

at the HI setting is normal and will occur more often if

the cookware is too small for the radiant element or if

the cookware bottom is not flat.

• Be sure to read the detailed instructions for ceramic

glass cooktop cleaning in the Cleaning and

Maintenance section of this Use & Care Manual.

Types of cooktop elements

The ceramic glass cooktop has radiant surface elements

located below the surface of the glass. The patterns on the

ceramic glass will outline the size and type of element

available. The single radiant element will have one round

English 15

outlinepatternshown(keepwarmzoneisonlydesignedto

keepfoodwarm).Thedualradiantelementisflexible

becauseyoumaysetjustthesmallerinnerportionasa

singleelementorbothinnerandouterportionscanbeset

toheattogether.

o

OFF HI

MED

OFF O OFF (_

LO ._ HI HI _ HI

6 6

2_)8 4 4

3 7 2 2

MED LO LO

Keep Warm Zone Single Radiant Dual Radiant

Surface Control Surface Control Surface Control

(some models) (some models)

Suggested settings for single and dual radiant

elements table.

Settings Type of cooking

High (HI - 9) Start most foods, bring

water to a boil, pan broiling

Medium high (7 - 8) Continue a rapid boil, fry,

deep fat fry

Medium (5 - 6) Maintain a slow boil,

thicken sauces and

gravies or steam

vegetables

Medium Low (2 - 4) Keep foods cooking,

poach, stew

Low (LO - 1) Keep warm, melt, simmer

About the radiant surface elements

The element temperature rises gradually and evenly. As

the temperature rises, the element will glow red. To

maintain the selected setting the element will cycle ON and

OFF. The heating element retains enough heat to provide a

uniform and consistent heat during the off cycle.

For efficient cooking, turn OFF the element several minutes

before cooking is complete. This will allow residual heat to

complete the cooking process.

Suggested radiant surface element

settings

The suggested settings found in the following chart are

based on cooking with medium-weight aluminum pans with

lids. Settings may vary when using other types of pans.

Single radiant surface elements (all

models)

To operate the single radiant element:

1. Place correctly sized cookware on single radiant

surface element.

2. Push in and turn the surface control knob in either

direction to the desired setting (See Suggested

settings for single and dual radiant elements table).

Start most cooking operations on a higher setting and

then turn to a lower setting to finish cooking. The

surface control knobs do not have to be set exactly on

a particular spot. Use the graphics provided as a guide

and adjust the control knob as needed. Each surface

element provides a constant amount of heat at each

setting. A glowing red surface heating area extending

beyond the bottom edge of the cookware indicates the

cookware is too small for the surface heating area.

3. When cooking is complete, turn the radiant surface

element OFF before removing the cookware.

English 16

,_ CAUTION:

Radiant surface elements may appear to

have cooled after they have been turned off.

The glass surface may still be hot and burns

may occur if the glass surface is touched

before it has cooled sufficiently.

Do not place plastic items such as salt and

pepper shakers, spoon holders or plastic

wrappings on top of the range when it is in

use. These items could melt or ignite.

Potholders, towels or wooden spoons could

catch fire if placed too close to the surface

elements.

Do not allow aluminum foil, or ANY material

that can melt to make contact with the

ceramic glass cooktop. If these items melt on

the cooktop, they will damage the ceramic

cooktop.

O

Hi

o

OFF Q

HI

SIN SIM

LO LO

Heating with Inner

(small) element only

0 OFF Q

H HI

_6

;4

2

SIM SIM

LO LO

Heating with both

elements

Areas that heat are shown darkened

Dual radiant surface elements (some models)

Symbols on the backguard are used to indicate which coil

of the dual radiant element will heat. The 0 symbol

indicates the inner coil only. The Q symbol indicates

both inner and outer coils will heat.

To operate a dual radiant element:

1. Place correctly sized cookware on dual radiant surface

element.

2. Push in and turn the surface control knob clockwise to

begin heating both the inner and outer portions of the

dual element. If only the inner heating portion is

needed like for smaller cookware, push in and turn the

knob counter-clockwise to start.

3. When cooking is complete, turn the dual radiant

surface element OFF before removing the cookware.

Start most cooking operations on a higher setting and then

turn to a lower setting to finish cooking. The surface control

knobs do not have to be set exactly on a particular mark.

Use the marks as a guide and adjust the control knob as

needed. A glowing red surface heating area extending

beyond the bottom edge of the cookware indicates the

cookware is too small for the surface heating area.

You may switch from either element setting at any time

during cooking. See Suggested radiant surface element

settings table on previous page.

Keep warm (some models)

The purpose of the keep warm zone is to keep hot cooked

foods at serving temperature. Use the keep warm feature

to keep cooked foods hot such as; vegetables, gravies,

casseroles, soups, stews, breads, pastries and oven-safe

dinner plates.

Always start with hot food. It is not recommended to heat

cold food on the keep warm zone. All food placed on the

warming zone should be covered with a lid to maintain

quality.

For best results, when warming pastries or breads, the

cover should have an opening to allow moisture to escape.

Do not use plastic wrap to cover food. Plastic may melt

onto the surface and be very difficult to clean. Use only

dishware, utensils and cookware recommended for oven

and cooktop use on the keep warm zone.

Setting the keep warm control

1. Push in either direction and turn the knob. The

temperatures are approximate, and are designated by

HI and LO. However, the control can be set at any

position between HI and LO for different levels of

warming.

2. When ready to serve, turn the control to OFF. The keep

warm zone will remain warm until the indicator light

English 17

goesOFF.

OFF

LO(

MED

Keep Warm Zone

Surface Control

(some models)

Temperature selection - Refer to the Keep Warm Zone

Recommended Food Settings Table. If a particular food

is not listed, start with the medium level, and adjust as

needed. Most foods can be kept at serving temperatures by

using the medium level.

Keep Warm Zone Recommended Food Settings Table

Food Item Heating Level

Breads/Pastries) LO (Low)

Casseroles LO (Low)

Dinner Plates with Food LO (Low)

Eggs LO (Low)

Gravies LO (Low)

Meats MED (Medium)

Sauces MED (Medium)

Soups (cream) MED (Medium)

Stews MED (Medium)

Vegetables MED (Medium)

Fried Foods HI (High)

Hot Beverages HI (High)

Soups (liquid) HI (High)

CAUTION:

Unlike the surface elements, the keep warm

zone will not glow red when it is hot.

Always use potholders or oven mitts when

removing food from the keep warm zone as

cookware and plates will be hot.

Radiant surface elements may appear to

have cooled after they have been turned off.

The glass surface may still be hot and

burns may occur if the glass surface is

touched before it has cooled sufficiently.

Do not place plastic items such as salt

and pepper shakers, spoon holders or

plastic wrappings on top of the range

when it is in use. These items could melt or

ignite. Potholders, towels or wooden spoons

could catch fire if placed too close to the

surface elements.

Do not allow aluminum foil, or ANY

material that can melt to make contact

with the ceramic glass cooktop. If these

items melt on the cooktop they will damage

the ceramic cooktop.

Settings

Setting the Clock

When the appliance is first plugged in, or when the power

supply to the appliance has been interrupted, the display

will flash "12:00".

To set the analog clock:

1. Press "CLOCK" once (do not hold pad down).

2. Within 5 seconds, press and hold "+" or "-" until the

desired time of day appears in the display.

Note: The clock cannot be changed during any timed bake

or self-clean cycle.

Changing between continuous bake

setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving

feature that will shut off the oven if the control is left on for

more than 11 hours and 59 minutes. The oven can be

programmed to override this feature for continuous baking.

English 18

La page charge ...

Bosch HES3053U/10 Le manuel du propriétaire

Ce manuel convient également à

Bosch HES3053U/10 Le manuel du propriétaire

dans d''autres langues

Documents connexes