The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures. Printed in China
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange
all parts. Locate the pre-installed tubing
and attach it to the pump.
Flow can be adjusted using the
control dial on the front of the
pump.
Place the pump inside the
fountain.
Securely attach the cable from
the light connection to the
transformer.
Install the decorative bird as
shown.
Locate and retrieve the light
connection from inside the
fountain. To prevent the risk of
the cables from the lights.
The light connection should
remain outside the fountain.