Samsung RH25H5611WW Manuel utilisateur

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

Free Standing Appliance

DA68-02981J-00.indb 1 14. 11. 25.  10:26

RH25H5611**

English - 2

Safety information

SAFETY INFORMATION

Before using your new Samsung Side-By-Side

Refrigerator, please read this manual thoroughly to

ensure that you know how to operate the features

and functions that your new appliance offers safely

and efﬁciently.

This appliance is not intended for use by persons

(including children) with reduced physical,

sensory, or mental capabilities, or those who lack

experience and knowledge, unless they have been

given supervision or instruction concerning the use

of the appliance by a person responsible for their

safety.

Because the following instructions cover various

models, the characteristics of your refrigerator may

differ slightly from the refrigerator described in this

manual.

If you have any question, contact us at

1-800-SAMSUNG or ﬁnd help and information

online at www.samsung.com.

Important safety symbols and

precautions:

WARNING

Hazards or unsafe practices that may result in

severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in

minor personal injury or property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall

socket.

Make sure the refrigerator is grounded to

prevent electric shock.

Call the contact center for help.

Note.

These warning symbols are here to prevent

injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe

place for future reference.

Contents

SAFETY INFORMATION ……………………………………………………………… 2

SETTING UP YOUR SIDE-BY-SIDE REFRIGERATOR …………………………… 9

OPERATING THE SAMSUNG SIDE-BY-SIDE REFRIGERATOR………………… 20

TROUBLESHOOTING ………………………………………………………………… 31

DA68-02981J-00.indb 2 14. 11. 25. �� 10:26

English - 3

SAFETY INFORMATION

WARNING

CRITICAL INSTALLATION

WARNINGS

• Do not install the refrigerator in a damp

location or place where it may come in

contact with water.

- Deteriorated insulation on electrical parts may

cause an electric shock or ﬁre.

• Do not place this refrigerator in direct sunlight

or expose it to the heat from stoves, room

heaters, or other appliances.

• Do not plug several appliances into the same

multiple power strip.

The refrigerator should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the voltage listed

on the refrigerator’s rating plate.

- This provides the best performance and

also prevents overloading of house wiring

circuits, which could cause a ﬁre hazard from

overheated wires.

• If the wall socket is loose, do not insert the

power plug.

- There is a risk of electric shock of ﬁre.

• Do not use a power cord that has cracks or

abrasion damage along its length or at either

end.

• Do not bend the power cord excessively or

place heavy objects on it.

• Do not twist or tie the power cord.

• Do not hook the power cord over a metal

object, place a heavy object on the power

cord, insert the power cord between objects, or

push the power cord into the space behind the

appliance.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This may result in an electric shock or ﬁre.

• Never unplug your refrigerator by pulling on the

power cord.

Always grip the plug ﬁrmly and pull straight out

from the outlet.

- Damage to the cord may cause a short-circuit,

ﬁre, and/or electric shock.

• Do not use aerosols near the refrigerator.

- Using aerosols near the refrigerator may cause

an explosion or ﬁre.

• Do not install this appliance near a heater or

inﬂammable material.

• Do not install this appliance in a humid, oily,

or dusty location , or in a location exposed to

direct sunlight or water (rain, etc.).

• Do not install this appliance in a location where

gas may leak.

- This may result in an electric shock or ﬁre.

• This refrigerator must be properly

located and installed in accordance

with the instructions in this manual

before you use it.

• Connect the power plug in the proper position

with the cord hanging down.

- If you connect the power plug upside down, the

wire can get cut off and cause a ﬁre or electric

shock.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This constitutes a ﬁre hazard.

• Make sure that the power plug is not crushed

or damaged by the back of the refrigerator.

• Keep the packing materials out of reach of

children.

- There is a risk of death from suffocation if a

child puts the packing materials on his or her

head.

• The appliance must be positioned so that the

plug is accessible after installation.

- Failing to do so may result in an electric shock

or ﬁre due to electric leakage.

• You need to remove all the protective plastic

ﬁlm before you initially plug the product in.

• The refrigerator must be safely

grounded.

- Always make sure that you have grounded the

refrigerator before attempting to investigate or

repair any part of the appliance.

Power leakages can cause severe electric

shock.

• Never use gas pipes, telephone lines, or other

potential lightning attractors as an electrical

ground.

- Improper use of the grounding plug can result

in a risk of electric shock.

If it is necessary to use an extension cord, use

only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the appliance.

The marked rating of the extension cord should

be AC 115-120 V, 10 A, or more.

If a grounding adapter is used, make sure the

DA68-02981J-00.indb 3 14. 11. 25. �� 10:26

English - 4

receptacle box is fully grounded.

• Plug the power plug into the wall socket ﬁrmly.

Do not use a damaged power plug, damaged

power cord, or loose wall socket.

- This may result in an electric shock or ﬁre.

• If the power cord is damaged,

have it replaced immediately by the

manufacturer or one of its service

agents.

CAUTION

INSTALLATION CAUTIONS

• Allow sufﬁcient space around the

refrigerator and install it on a ﬂat

surface.

- If your refrigerator is not level, cooling efﬁciency

and durability can be declined.

- Keep the ventilation space in the appliance

enclosure or mounting structure clear of

obstructions.

• Allow the appliance to stand for 2 hours before

loading foods after installation and turning on.

• We strongly recommend you have a qualiﬁed

technician or service company install the

refrigerator.

- Failing to do so may result in an electric shock,

ﬁre, explosion, problems with the product, or

injury.

WARNING

CRITICAL USAGE WARNINGS

• Do not insert the power plug into a wall

socket with wet hands.

• Do not store articles on the top of the

appliance.

- When you open or close the door, the articles

may fall and cause personal injury and/or

material damage.

• Do not insert hands, feet or metal objects (such

as knives, etc.) into the bottom or the back of

the refrigerator.

- This may result in an electric shock or injury.

- Any sharp edges may cause a personal injury

• Do not put a container ﬁlled with water on the

refrigerator.

- If spilled, there is a risk of ﬁre or electric shock.

• Children should be supervised to ensure that

they do not play with the appliance.

- Keep ﬁngers out of “pinch point” areas.

Clearances between the doors and cabinet are

necessarily small. Be careful when you open

the doors if children are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Do not insert your hands into the bottom area

under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on a drawer cover.

- The drawer may break and cause them to slip.

• Do not overﬁll the refrigerator with food.

- When you open the door, an item may fall out

and cause personal injury or material damage.

• Do not touch the inside walls of the freezer or

products stored in the freezer with wet hands.

- This may cause frostbite.

• Never put ﬁngers or other objects into the water

dispenser hole, ice chute, or ice maker bucket.

- It may cause personal injury or material

damage.

• Do not use or place any substances sensitive

to temperature such as inﬂammable sprays,

inﬂammable objects, dry ice, medicine, or

chemicals near or inside of the refrigerator.

• Do not keep volatile or inﬂammable objects

or substances (benzene, thinner, propane

gas, alcohol, ether, LP gas, and other such

DA68-02981J-00.indb 4 14. 11. 25. �� 10:26

English - 5

products) in the refrigerator.

- This refrigerator is for storing food only.

- This may result in ﬁre or explosion.

• Do not store pharmaceutical products, scientiﬁc

materials, or temperature sensitive products in

the refrigerator.

- Products that require strict temperature

controls must not be stored in the refrigerator.

• Do not place or use an electrical appliance

inside the refrigerator, unless it is of a type

recommended by the manufacturer.

• Do not stand on top of the appliance or place

objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal

objects, etc.) on the appliance.

This may result in an electric shock, ﬁre,

problems with the product, or injury.

Do not put a container ﬁlled with water on the

appliance.

- If spilled, there is a risk of ﬁre or electric shock.

• Do not use mechanical devices or any other

means to accelerate the defrosting process,

other than those recommended by the

manufacturer.

• Do not damage the refrigerant circuit.

• Do not spray volatile material such as

insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also

result in an electric shock, ﬁre, or problems with

the product.

• Never stare directly at the UV LED lamp for long

periods of time.

- This may result in eye strain due to the

ultraviolet rays.

• Do not attempt to repair, disassemble,

or modify the appliance yourself.

• Do not use any fuse (such as cooper, steel wire,

etc.) other than a standard fuse.

• If your appliance needs to be repaired or

reinstalled, contact your nearest service center.

- Failing to do so may result in an electric shock,

ﬁre, problems with the product, or injury.

• If the interior or exterior LED lamp has gone

out, please contact your nearest service center.

• Children should be supervised to

ensure that they do not play with the

appliance.

- Keep ﬁngers out of “pinch point” areas. :

Clearances between the doors and cabinet are

necessarily small.

Be careful when you open the doors if children

are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Bottles should be stored tightly together so that

they do not fall out.

• This product is intended only for the storage of

food in a domestic environment.

• If a gas leak is detected, avoid any naked

ﬂames or potential sources of ignition, and air

the room in which the appliance is standing for

several minutes.

- Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in explosion or ﬁre.

• Use only the LED Lamps provided by the

manufacturer or its service agents.

• If the refrigerator emits a burning smell

or smoke, unplug the refrigerator

immediately and contact your

Samsung Electronics service center.

• If you experience difﬁculty changing a non-LED

light, contact a Samsung service center.

• If the product is equipped with LED Lamps, do

not disassemble the Lamp Covers and LED

Lamps yourself.

- Please contact your service agents.

• If dust or water enters the refrigerator, unplug

the refrigerator and contact your Samsung

Electronics service center.

- There is a risk of ﬁre.

DA68-02981J-00.indb 5 14. 11. 25. �� 10:26

English - 6

CAUTION

USAGE CAUTIONS

• Do not re-freeze frozen foods that have

thawed completely.

Do not place carbonated or ﬁzzy drinks

in the freezer compartment.

Do not put bottles or glass containers

in the freezer.

- When the contents freeze, the glass may break

and cause personal injury.

• Use only the ice maker provided with the

refrigerator.

• Have the refrigerator’s water supply connected

only to a potable water supply.

To operate the ice maker properly, water

pressure of 20 ~ 125psi (138 ~ 862kPa) is

required.

If you will be away from home for a long period

of time (on vacation, for example) and won’t

be using the water or ice dispensers, close the

water valve.

- Otherwise, water leakage may occur.

• If you won’t be using the refrigerator for a very

long period of time, (3 weeks or more) empty

the refrigerator including ice bucket, unplug it,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• Service Warranty and Modiﬁcation.

- Any changes or modiﬁcations

performed by a 3rd party on this

ﬁnished appliance are not covered

under Samsung warranty service, nor is

Samsung responsible for safety issues

that result from 3rd party modiﬁcations.

• Do not block the air vents inside the refrigerator.

- If the air vents are blocked, especially with a

plastic bag, the refrigerator can be over cooled.

If this cooling period lasts too long, the water

ﬁlter may break and cause water leakage.

• If the refrigerator is disconnected from the

power supply, you should wait for at least ﬁve

minutes before plugging it back in.

• If you have a long vacation planned or do not

intend to use the refrigerator for a long period of

time, (3 weeks or more) empty the refrigerator

including ice bucket, pull out the power plug,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• To get the best performance from the product:

- Do not place food too close to the vents at the

rear of the appliance as it can obstruct free air

circulation in the refrigerator compartment.

- Wrap food up properly or place it in airtight

containers before putting it into the refrigerator.

- Do not place glass bottles or carbonated

beverages into the freezer.

They can freeze and break. Broken beverage

containers can cause injury.

- Please observe maximum storage times and

expiration dates of frozen goods.

- There is no need to disconnect the refrigerator

from the power supply if you will be away for

less than three weeks.

However, if you will be away for more than three

weeks, remove all the food and ice in the ice

bucket, unplug the refrigerator, close the water

valve, wipe excess moisture from the inside

walls, and leave the doors open to prevent

odors and mold.

• Fill the water tank and ice cube trays with

potable water only (tap water, mineral water, or

puriﬁed water).

- Do not ﬁll the tank with tea or a Sports drink.

This may damage the refrigerator.

• Do not strike or apply excessive force to any

glass surface.

- Broken glass may result in a personal injury

and/or property damage.

• If the product is ﬂooded, make sure to

contact your nearest service center.

- There is a risk of electric shock or ﬁre.

DA68-02981J-00.indb 6 14. 11. 25. �� 10:26

English - 7

CAUTION

CLEANING CAUTIONS

• Do not spray water directly on the

inside or outside the refrigerator.

- There is a risk of ﬁre or electric shock.

• Do not use a hair dryer to dry the inside of the

refrigerator.

• Do not place a lighted candle in the refrigerator

to remove bad odors.

- This may result in an electric shock or ﬁre.

• Use a clean, dry cloth to remove any

foreign matter or dust from the power

plug blades.

Do not use a wet or damp cloth when

cleaning the plug.

- Otherwise, there is a risk of ﬁre or electric

shock.

• Before cleaning or performing

maintenance, unplug the appliance

from the wall socket.

- Failing to do so may result in an electric shock

or ﬁre.

WARNING

This product contains chemicals known to

the State of California to cause cancer and

reproductive toxicity.

WARNING

CRITICAL DISPOSAL WARNINGS

• DANGER : Risk of child entrapment.

Before you throw away your old

refrigerator or freezer:

- Take off the doors and door latch.

- Leave the shelves in place so that children

cannot easily climb inside.

- Children trapped inside a refrigerator can hurt

themselves or suffocate to death.

• Please dispose of the packaging material from

this product in an environmentally friendly

manner.

• Ensure that none of the pipes on the back of

the appliance are damaged prior to disposal.

• R-600a or R-134a is used as a refrigerant.

Check the compressor label on the rear of

the appliance or the rating label inside the

fridge to see which refrigerant is used for your

refrigerator.

If this product contains ﬂammable gas

(Refrigerant R-600a), contact your local

authority in regard to safe disposal of this

product.

• When disposing of this refrigerator, remove the

door/door seals and door latch so that small

children or animals cannot become trapped

inside.

Children should be supervised to ensure that

they do not play with the appliance.

If trapped inside, the child may get hurt or

suffocate to death.

• Cyclopentane is used in the insulation.

The gases in the insulation material require a

special disposal procedure.

Please contact your local authorities in regard

to the environmentally safe disposal of this

product.

• Keep all packaging materials well out of the

reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over his or her head, the

child could suffocate.

DA68-02981J-00.indb 7 14. 11. 25. �� 10:26

English - 8

ADDITIONAL TIPS FOR

PROPER USAGE

• In the event of a power failure, call the local

ofﬁce of your Electricity Company and ask how

long it is going to last.

- Most power failures that are corrected in an

hour or two will not affect your refrigerator

temperatures. However, you should minimize

the number of door openings while the power

is off.

- Should the power failure last more than 24

hours, remove and discard all frozen food.

• The appliance might not operate consistently

(frozen contents can thaw or temperatures

can become too warm in the frozen food

compartment) when sited for an extended

period of time in a location where ambient

air temperatures are constantly below the

temperatures for which the appliance is

designed.

• In case of particular foods, keeping it under

refrigeration can have a bad effect on

preservation due to its properties.

• Your appliance is frost free, which means there

is no need to manually defrost your appliance.

This will be carried out automatically.

• Temperature rise during defrosting complies

with ISO requirements.

But If you want to prevent an undue rise in the

temperature of frozen food while the appliance

defrosts, wrap the frozen food in several layers

of newspaper.

• Do not re-freeze frozen foods that have thawed

completely.

Saving Energy Tips

- Install the appliance in a cool, dry room with

adequate ventilation.

Ensure that it is not exposed to direct sunlight

and never put it near a direct source of heat (a

radiator, for example).

- Not to block any vents and grilles is

recommended for energy efﬁciency.

- Allow warm food to cool down before placing it

in the appliance.

- Put frozen food in the refrigerator to thaw.

You can then use the low temperatures of the

frozen products to cool food in the refrigerator.

- Do not keep the door of the appliance open for

too long when putting food in or taking food

out.

The shorter the time the door is open, the less

frost build-up you’ll have in the freezer.

- It is recommended to install the refrigerator

with clearance to the back and sides. This will

help reduce power consumption and keep your

energy bills lower.

DA68-02981J-00.indb 8 14. 11. 25. �� 10:26

English - 9

SETTING UP

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on the purchase of your Samsung

Side-By-Side Refrigerator.

We hope you will enjoy the many state-of-the-art

features and efﬁciencies that this new appliance

has to offer.

Selecting the best location for the

refrigerator

Choose:

• A location with easy access to a water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level) ﬂooring.

• A location with enough space for the

refrigerator doors to open easily.

• A location that allows sufﬁcient space to the

right, left, back, and top for air circulation.

If the refrigerator does not have enough space,

it will run less efﬁciently and increase its power

consumption.

• A location that allows you to move the

refrigerator easily if it needs maintenance or

service.

• Do not install the refrigerator in locations where

BB

C

DD

AA

E

Depth “A” 34 1/64" (864 mm)

Width “B” 35 3/4" (908 mm)

Height “C” 68 1/2" (1740 mm)

Overall Height “D” 69 7/8" (1775 mm)

Depth “E” 36 39/64" (930 mm)

62 2/8" (1581 mm)

16 6/8" (427 mm)

135° 135°

2 "

(50.8 mm)

35 3/4" (908 mm)

29 1/8"

(740 mm)

50 3/4" (1290 mm)

1" (26 mm)

2" (53 mm)

Each measurement based on the design

dimension, so it may differ depending on

the measuring method.

Setting up your side-by-side

refrigerator

DA68-02981J-00.indb 9 14. 11. 25.  10:26

English - 10

When moving your refrigerator

To prevent ﬂoor damage, be sure the front leveling

legs are in the up position (above the ﬂoor).

See “Leveling the Refrigerator” on page 14 for

instructions.

SCREW DRIVER(-)

CONTROL LEVER

Flooring

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the ﬂoor.

This surface should be strong enough to support a

fully loaded refrigerator.

To protect the ﬁnish of the ﬂooring during

installation, cut a large section of the cardboard

carton and place it under the refrigerator where

you are working.

When moving the refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

CAUTION

When installing, servicing, or cleaning behind the

refrigerator, be sure to pull the unit straight out and

push it back in straight after ﬁnishing.

Important: Make sure that you can easily move

your refrigerator to its ﬁnal location by measuring

doorways (both width and height), thresholds,

ceilings, stairways, etc.

• Make sure you disconnect the water supply line

BEFORE removing the freezer door.

To avoid damage, refer to ‘Separating the water

line from the refrigerator’ on page 12.

SETTING UP THE REFRIGERATOR

Installing the handles

Important : If you need to remove the refrigerator’s

doors to move it into place, install the handles after

you put the doors back on.

To remove the doors, see “Removing the

Refrigerator Doors” on page 11.

Take the handles out of the right side door.

(Only RH25* models)

Unpack the handles and locate the door

installation packet with the ﬁxer screws

and hex wrench.

DA68-02981J-00.indb 10 14. 11. 25. �� 10:26

English - 11

SETTING UP

How to install the handles

Using a Philips head screwdriver, attach ﬁxer

screws to the screw holes on each door.

If your refrigerator already has the ﬁxer screws

installed, skip this step.

Orient each handle so that the end with the sticker

attached is at the top and the holes for the screws

are facing the screw holes on the refrigerator door.

Place a handle over the ﬁxer screws on one door,

and then slide the handle down ﬁrmly.

Repeat with the second handle on the other door.

For Models with a lever attached to the right

handle, push the lever button on the handle in,

hold it in place, and then slide the bottom of the

handle down over the ﬁxer screw.

Fix the handles to the doors

by sliding them down ﬁrmly.

( 1 )

( 3 )( 2 )

L

S

Using the include hex wrench, tighten the set

screw on the top inside section of each handle.

Use the longer part of the hex wrench to begin

tightening, and then the shorter part to tighten the

screw fully, as shown in the diagram below.

( 4 ) ( 5 )

L

S

REMOVING THE REFRIGERATOR

DOORS

If your entrance won’t allow the refrigerator to pass

through it easily, you can remove the refrigerator

doors.

To remove the doors, follow the steps below.

If you do not need to remove the doors, go to

“Leveling the Refrigerator” on page 14.

Tools You’ll Need

Philips

Screwdriver

Flat-blade

Screwdriver

10mm Socket

Wrench

1. Remove the Front Leg Cover

Open both the freezer and refrigerator doors.

Unscrew the three screws holding the front leg

cover in place by turning them counter-clockwise.

When the screws are loose, remove the front leg

cover.

Screw

Front leg cover

CAUTION

When disassembling, make sure the unit is turned

off.

DA68-02981J-00.indb 11 14. 11. 25. �� 10:26

English - 12

2. Separate the water supply line from

the refrigerator

1. Remove one or two water lines, depending on

the model, by pressing each coupler (1) and

pulling the water lines (2) away.

(1)

(2)

CAUTION

Do not cut the water line.

Gently separate it from the coupler.

3. Remove the freezer door

A few things to mention ﬁrst.

• Make sure that you lift the door straight up so

the hinges are not bent or broken.

• Be careful not to pinch the water tubing and

wire harness on the door.

• Place doors on a protected surface to prevent

scratching or damage.

• Is necessary, have two people disassemble the

doors.

1. With the Freezer door closed, remove the

upper hinge cover (1) using a screwdriver,

and then disconnect the wires by gently pulling

them apart (2).

(2)

(1)

Pressing

Be careful not to damage the sensor

harness with the hinge cover.

2. Remove the hinge bolts (3) with a 10mm

Socket Wrench.

Remove the ground screw (4) by turning it

counter-clockwise.

Take off the upper hinge (5) in the direction of

the arrow.

Take care that the door does not fall on you.

(4)

(3)

(5)

3. Open the Freezer door, and then remove the

door from the lower hinge (6) by carefully lifting

it up (7).

(7)

(6)

DA68-02981J-00.indb 12 14. 11. 25. �� 10:26

English - 13

SETTING UP

4. Remove the lower hinge (8) from the lower

hinge bracket (9) by lifting the lower hinge up

in the direction of the arrow.

(8)

(9)

CAUTION

Make sure to put the water line through the lower

hinge before re-assembling it.

4. REMOVE THE FRIDGE

SHOWCASE

1. With the door closed, remove the upper hinge

cover (1) using a screwdriver.

(1)

2. Disconnect the wires.

Pressing

CAUTION

When disassembling, make sure the unit is turned

off.

3. Disassemble the three fastening screws on the

top hinge of the show case.

4. Disassemble the show case.

Lift the door straight up.

5. REMOVE THE FRIDGE DOOR

1. Remove the hinge bolts (2) with a 10mm

Socket Wrench.

Take off the upper hinge (3) in the direction of

the arrow.

Take care that the door does not fall on you.

(2)

(3)

DA68-02981J-00.indb 13 14. 11. 25. �� 10:26

English - 14

CAUTION

Do not remove the sensor assembly in the right

upper hinge cover.

Re-attaching the Fridge Door

To re-attach the fridge door, replace parts in

reverse order.

Re-attaching the Freezer Door

To re-attach the freezer door, replace parts in

reverse order.

CAUTION

Hook the wire on the Hinge Hook to prevent

damage to the wire when re-assembling.

Re-attaching the Water Supply Lines

1. The Water Lines must be fully Inserted into the

center of the transparent coupler to prevent

water leakage from the dispenser.

2. Insert the 2 clips in the install pack as shown

below, and then conﬁrm that each clip holds

the line ﬁrmly.

Center of Transparent coupler

Clip A (1/4”)

(6.35mm)

CAUTION

Make sure the color of the water lines match.

LEVELING THE REFRIGERATOR

The refrigerator must be level before you can make

ﬁnal adjustments.

Use a level to test if the refrigerator is level both

side to side and back to front.

If the refrigerator is not level, you will not be able

to get the doors perfectly even, which may cause

moisture condensation and increased energy bills.

The front of the refrigerator is also

adjustable.

Before levelling the refrigerator, remove

the front leg cover.

Open both the freezer and refrigerator doors.

Unscrew the three screws holding the front leg

cover in place by turning them counter-clockwise.

When the screws are loose, remove the front leg

cover.

DA68-02981J-00.indb 14 14. 11. 25. �� 10:26

English - 15

SETTING UP

If the Freezer part is lower than the Fridge

part.

Insert a ﬂat-blade screwdriver into a slot on the

Freezer Leg, then turn it clockwise.

If the Fridge part is lower than the Freezer

part.

Insert a ﬂat-blade screwdriver into a slot on the

Fridge Leg, then turn it clockwise.

Screw Driver Leg

Refer to the next section for the best way

to make very minor adjustments to the

doors.

HOW TO ADJUST THE DOOR

HEIGHT

If one refrigerator door is lower than the

other:

• The door height levels can be adjusted using

the adjustment nut located at the bottom of

refrigerator door.

• Raising the door too high can cause the door to

interfere with the hinge cover when it is opened

or closed.

(A)

(B)

Before adjusting the doors, remove the

front leg cover.

Open both the freezer and refrigerator doors.

Unscrew the three screws holding the front leg

cover in place by turning them counter-clockwise.

When the screws are loose, remove the front leg

cover.

DA68-02981J-00.indb 15 14. 11. 25. �� 10:26

English - 16

1. Open the door that needs to be adjusted and

loosen the clamping nut (A) at the bottom of

the door by turning it clockwise ( ) using

the spanner included in the product package.

(Raise the lower of the two doors ﬁrst.)

A

2. Adjust the height of the door by turning the

adjustment nut (B) counterclockwise ( )

with a spanner.

(Turn it counterclockwise ( ) to increase

the height of the door and clockwise ( ) to

decrease it.)

- Open the door and adjust it from the inside.

B

3. Once the doors are level, turn the clamping nut

(A) counterclockwise ( ) to tighten it.

A

Adjusting the level when the refrigerator

is empty can result in the refrigerator

becoming uneven again once items have

been placed inside.

If this occurs, adjust the level again.

WHEN THE FREEZER DOOR IS

LOWER THAN FRIDGE DOOR

A level refrigerator is necessary for getting the

doors perfectly even.

Make sure your refrigerator is level before you

begin.

If you need help leveling, review the previous

section on leveling the refrigerator.

Freezer door is lower than Fridge door

The process for adjusting each door is the same.

Open the doors and adjust them, one at a time, as

follows:

1. Unscrew the nut (1) from the lower hinge until

it reaches the upper end of the bolt (2).

(2) Bolt

(1) Nut

(3) Wrench

When you release the nut (1), make sure

that you use the hex wrench provided

(3) to loosen the bolt (2) in a counter-

clockwise ( ) direction.

You should then be able to unscrew the

nut (1) with your ﬁngers.

DA68-02981J-00.indb 16 14. 11. 25. �� 10:26

English - 17

SETTING UP

2. Adjust the height difference between the doors

by turning the bolt (2) clockwise ( ) or

counter clockwise ( ).

(2) Bolt

(3) Wrench

When you turn clockwise ( ), the

door will move up.

3. After adjusting the doors, turn the nut (1)

clockwise ( ) until it reaches the lower

end of the bolt, then tighten the bolt again with

the wrench (3) to ﬁx the nut in place (1).

(2) Bolt

(1) Nut

(3) Wrench

If you do not secure the nut ﬁrmly, the bolt

may release.

MAKING MINOR ADJUSTMENTS

BETWEEN THE SHOW CASE AND

INNER CASE OF THE FRIDGE

After raising the out door, insert the supplied SHIM

HINGE MIDDLE in the gap between the Show

case of fridge and the HINGE-SHAFT.

The SHIM HING MIDDLE is included with

the refrigerator. The thickness of the SHIM

is 1mm.

CAUTION

Don’t make the Show Case door higer than Inner

Case door.

- The Show Case can break away from

STOPPER (HINGE )

DA68-02981J-00.indb 17 14. 11. 25. �� 10:26

English - 18

INSTALLING THE WATER

DISPENSER LINE

A water dispenser is one of the helpful features on

your new Samsung Refrigerator.

To help promote better health, the Samsung water

ﬁlter removes unwanted particles from your water.

However, it does not sterilize or destroy

microorganisms.

You may need to purchase a water purifying

system to do that.

The water line also connects to the ice maker.

For the ice maker to operate properly, water

pressure of 20 ~ 125psi (138 ~ 862kPa) is

required.

If the refrigerator is installed in an area with low

water pressure (below 20psi), you can install a

booster pump to compensate for the low pressure.

After you have connected the water line, make

sure the water storage tank inside the refrigerator

is properly ﬁlled.

To do this, press the water dispenser lever until

water runs from the water dispenser.

Water line installation kits are available at

extra cost from your dealer.

We recommend using a water supply kit

that contains copper tubing.

Connecting to the water supply line

1. First, shut off the main water supply line and

make sure the ice maker is turned off.

2. Locate the nearest cold water drinking water

line.

3. Install the pipe clamp and shut off valve.

4. Connect the water line installation kit to the

shut off valve.

Shut off valve

Pipe clamp

Cold water line

Water line installation kit

Connecting the water supply line to the

refrigerator

There are several items that you need to purchase

to complete this connection.

You may ﬁnd these items sold as a kit at your local

hardware store.

Use Copper Tubing Use Plastic Tubing

• ¼” copper tubing

• ¼” compression nut

(1pc)

• Ferrule (2pc)

• ¼” plastic tubing

→ Molded end (Bulb)

• ¼” compression nut

(1pc)

Compression Nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic Tubing

(Supplied)

Compression

Fitting (Assembled)

Bulb

Compression

nut (B) (1/4”)

(Not supplied)

or

Copper tubing

(Not supplied)

Plastic tubing (B)

(Not supplied)

Household water line

Refrigerator

1. Connect the household water line to the

assembled compression ﬁtting.

- If you are using copper tubing, slip the

compression nut (B) (not supplied) and

ferrule (not supplied) on the copper tubing (not

supplied) as shown.

- If you are using plastic tubing (B), insert the

molded end (Bulb) of the plastic tubing (B) into

the compression ﬁtting.

CAUTION

Do not use plastic tubing (B) without the molded

end (Bulb).

DA68-02981J-00.indb 18 14. 11. 25. �� 10:26

English - 19

SETTING UP

2. Tighten the compression nut (B) onto the

compression ﬁtting.

Do not over-tighten the compression nut (B).

3. Turn the water on and check for any leaks

inside the refrigerator, around the water ﬁlter,

and in any connection areas.

If you ﬁnd water drops or leaks, turn off the

main water supply.

If the leaks are in the connection areas, check

the connections and, if necessary, tighten.

If there are leaks in the refrigerator, check

the water ﬁlter and conﬁrm it is in the locked

position.

Turn on the water supply and check for leaks

again.

4. Plug in the refrigerator.

5. Flush 3 gallons of water through the ﬁlter before

drinking or using the water from the refrigerator.

(Flush approximately 6 minutes.)

This will clean the water supply system and

remove air from the lines.

To ﬂush, press the Water button, and then press

a large glass or cup against the water dispenser

lever. Fill the glass, empty it into the kitchen sink

after it is ﬁlled, and then repeat.

Additional ﬂushing may be required in

some households.

6. Open the refrigerator door and make sure there

are no water leaks coming from the water ﬁlter.

• After you turn on the refrigerator, let the

ice maker make ice for 1 to 2 days.

Over that period of time, throw out the

ﬁrst 1 or 2 buckets of ice the ice maker

makes to ensure all impurities have been

removed from the water line.

• Only connect the water line to a drinkable water

source.

• If you have to repair or disassemble the water

line, cut off 1/4“ of the plastic tubing to make

sure you get a snug, leak-free connection.

• You can test the water line quickly using a

paper cup.

Under normal conditions, the water dispenser

can ﬁll a 5.75oz. (170cc) cup in about 10

seconds.

COMPLETING THE SET UP

Now that you have your new refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your refrigerator

should be fully operational.

1. Make sure your refrigerator is in an appropriate

location with reasonable clearance between it

and the wall. Refer to installation instructions in

this manual.

2. Once the refrigerator is plugged in, make sure

the interior light comes on when you open the

doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour.

The freezer will get slightly chilled and the motor

will run smoothly.

Reset the refrigerator and freezer to the

temperatures you want.

4. After you plug the refrigerator in, it will

take a few hours to reach the appropriate

temperature.

You can store food and drinks in the refrigerator

after the temperature is sufﬁciently cool.

If condensation or water drops appear

on both sides of the fridge door’s central

part, turn the Energy Saver mode off after

removing the condensation.

(See the explanation of the Energy Saver

button in “Control panel functions” on

page 20.)

Preventing Power Cord Damage

To prevent power cord damage, ﬁx any excess

power cord to the top rear of the refrigerator as

shown in the illustration below.

DA68-02981J-00.indb 19 14. 11. 25. �� 10:27

English - 20

Operating the SAMSUNG side-

by-side refrigerator

(3) Lighting (Control Lock (3 sec))

Press the Lighting button to turn on the

dispenser LED lamp.

If you press and hold the Lighting button for

3 seconds, all buttons will be locked and the

dispenser pad will not work.

(4) Fridge (Power Cool (3 sec))

Press the Fridge button to set the Fridge

temperature between 44°F (7°C) and 34°F

(1°C).

Press and hold the Fridge button for 3 seconds

to decrease the time needed to cool products in

the Refrigerator.

(5) Ice (Ice Maker Off (3 sec))

Press the Ice button to select cubed ice, crushed

ice, or to turn the ice dispenser off.

Press and hold the Ice button for 3 seconds to

turn the ice making function off.

Press and hold the Ice button again for 3

seconds to turn the ice making function back on.

(6) Water (Reset Filter (3 sec))

Press the Water button to turn the water

dispenser on.

Press and hold the Water button for 3 seconds

after changing the ﬁlter to reset the water ﬁlter

indicator.

To deactivate the secondary functions

(such as Power Freeze, Ice Off, Power

Cool and Control Lock), press and hold

the corresponding button again for 3

seconds.

CONTROL PANEL FUNCTIONS

(1)

(2)

(5)

(3)

(4)

(6)

(1)

Energy Saver (°C↔°F (3 sec))

For better energy efﬁciency, press the Energy

Saver button.

If condensation occurs on the doors, turn the

Energy Saver function off.

To switch the temperature units between ºC and

ºF. touch and hold this button for 3 seconds.

Each time you press and hold the button, the ºC

and ºF temperature modes alternate and the ºC

or ºF icon lights up, indicating your selection.

(2) Freezer (Power Freeze (3 sec))

Press the Freezer button to set the freezer

temperature between 5°F (-15°C) and -8°F

(-23°C).

Press and hold the Freezer button for 3 seconds

to activate the Power Freezer function to

decrease the time needed to freeze products in

the Freezer.

This can be helpful if you need to quickly freeze

items that spoil easily or if the temperature in the

freezer has warmed dramatically (For example, if

the door was left open).

If you need to freeze a large amount of food,

activate the power freezer function when you put

the food into the freezer.

DA68-02981J-00.indb 20 14. 11. 25. �� 10:27

La page charge ...

Samsung RH25H5611WW Manuel utilisateur

Samsung RH25H5611WW Manuel utilisateur

dans d''autres langues

Documents connexes