MIXX StreamBuds Blend 2 User Guides

Marque: MIXX

Modèle: StreamBuds Blend 2

Catégorie: Banques d'alimentation

Taper: User Guides

CONTENTS | CONTENU

| INHALT | INHOUD |

CONTENIDO | CONTENUTI

| CONTEÚDO | INDHOLD |

SISÄLLYS

[EN] QUICK START GUIDE

[FR] GUIDE DE DÉMARRAGE RAPIDE

[DE] SCHNELLSTARTANLEITUNG

[NL] SNELSTARTGIDS

[ES] GUÍA BÁSICA DE INICIACIÓN

[IT] GUIDA RAPIDA

[PT] GUIA RÁPIDO

[DA] VEJLEDNING TIL HURTIG START

[FI] PIKAOPAS

EN: QUICK START GUIDE

LET’S STAY CHARGED

TIP: 15 MINUTE QUICK CHARGE

If you’re running low on power, charge your earbuds in

the case for 15 minutes and get 2 hours extra play time

while on the go

A voice prompt “Battery low” allows for 2 minutes play time

before the earbud(s) powers down stating “Battery low,

power off”. The Earbuds LED Light [2] will flash WHITE

once and will then switch off. Charge the earbuds using the

Portable Charging Case [5] .

While charging, each Earbud LED Light [2] will be WHITE

and once fully charged the LED Lights will turn off. Secure

the earbuds by closing the lid.

When the earbuds are placed inside the case and the lid is

closed, the charge indicator light (7) will glow WHITE for 4

seconds to indicate charging and then turn off.

The Earbuds

The Portable Charging Case

First time pairing

LET’S CONNECT

Remove both earbuds from the Portable Charging Case [5] .

They will automatically dual pair together; a voice will prompt

“Power on, pairing” and a ‘Beep’ will sound. One of the Earbud

LED Lights [2] will flash WHITE to indicate pairing mode. If the

earbuds do not automatically dual pair together, tap each Touch

Sensor [1] and [3] 4 times to power off and then place them

both back into the case. Remove the earbuds and they should

automatically dual pair together.

Go to the Bluetooth settings on your audio device and select ‘MIXX

Streambuds Blend 2’ from the list. Once paired successfully you

will hear “Connected” and the Earbud LED Light [2] will turn off.

You can now enjoy your music, watch a video or take a call hands

free.

The earbuds will automatically reconnect to the last device they

were paired with, confirming “Connected”.

Placing both earbuds back in the Portable Charging Case (5) will

power them off. (note – if the earbuds do not turn off, the battery

in your charging case needs to be recharged – see ‘Let’s Stay

Charged.’

Note: If your earbuds and charge case do not have any

power when you first unpack them, place the earbuds into

the charge case and plug the charge case into a USB port

using the USB C cable [8] provided.

Always connect the case via the USB C port [6] , to a suitable USB

wall charger, computer USB port or a power bank using the

USB C charging cable (8) supplied. Plug the supplied cable into

the USB C port [6] on the charge case.

The charge light indicator (7) will blink RED, on and off, to show the

case is charging.

LET’S STAY CHARGED

A voice prompt “Battery low” allows for 2 minutes play time

before the earbud(s) powers down stating “Battery low,

power off”. The Earbuds LED Light [2] will flash WHITE

once and will then switch off. Charge the earbuds using the

Portable Charging Case [5] .

While charging, each Earbud LED Light [2] will be WHITE

and once fully charged the LED Lights will turn off. Secure

the earbuds by closing the lid.

When the earbuds are placed inside the case and the lid is

closed, the charge indicator light (7) will glow WHITE for 4

seconds to indicate charging and then turn off.

The Portable Charging Case

First time pairing

LET’S CONNECT

Remove both earbuds from the Portable Charging Case [5] .

They will automatically dual pair together; a voice will prompt

“Power on, pairing” and a ‘Beep’ will sound. One of the Earbud

LED Lights [2] will flash WHITE to indicate pairing mode. If the

earbuds do not automatically dual pair together, tap each Touch

Sensor [1] and [3] 4 times to power off and then place them

both back into the case. Remove the earbuds and they should

automatically dual pair together.

Go to the Bluetooth settings on your audio device and select ‘MIXX

Streambuds Blend 2’ from the list. Once paired successfully you

will hear “Connected” and the Earbud LED Light [2] will turn off.

You can now enjoy your music, watch a video or take a call hands

free.

The earbuds will automatically reconnect to the last device they

were paired with, confirming “Connected”.

Placing both earbuds back in the Portable Charging Case (5) will

power them off. (note – if the earbuds do not turn off, the battery

in your charging case needs to be recharged – see ‘Let’s Stay

Charged.’

Note: If your earbuds and charge case do not have any

power when you first unpack them, place the earbuds into

the charge case and plug the charge case into a USB port

using the USB C cable [8] provided.

Always connect the case via the USB C port [6] , to a suitable USB

wall charger, computer USB port or a power bank using the

USB C charging cable (8) supplied. Plug the supplied cable into

the USB C port [6] on the charge case.

The charge light indicator (7) will blink RED, on and off, to show the

case is charging.

1 3

LET’S PLAY

Power on

Remove both earbuds from the case. They will

automatically turn on and dual pair together.

A voice prompt will state “Connected” as confirmation.

To manually turn on, long press each Touch Sensor

and [3] for 3 seconds.

Power off

Place both earbuds in the case. This will automatically

turn off the earbuds and the Bluetooth.

Play / Pause

Double tap either Touch Sensor [1] or [3]

Increase Volume

Single tap RIGHT Touch Sensor [3]

Decrease Volume

Single tap LEFT Touch Sensor [1]

Previous Track

Tap and hold LEFT Touch Sensor [1]

Skip Track

Tap and hold RIGHT Touch Sensor [3]

Answer / End Call

Double tap either Touch Sensor [1] or [3] .

(Audio is picked up via the microphones [4] .)

1 3

Triple tap either Touch Sensor [1] or [3] to activate Siri

or Google Assistant.

Your Voice Assist familiar ‘Beep’ will sound to confirm

connection. You can now ask Siri or Google Assistant a

question or state a command.

LET’S ASK GOOGLE

ASSISTANT / SIRI

This product can be recycled.

Products bearing this symbol must NOT be thrown

away with normal household waste.

Take the product to a collection point designated for

recycling of electronic devices.

Find out more about return and collection points through

your local authority.

LET’S RECYCLE

4EN

Power on

Remove both earbuds from the case. They will

automatically turn on and dual pair together.

A voice prompt will state “Connected” as confirmation.

To manually turn on, long press each Touch Sensor

and [3] for 3 seconds.

Power off

Place both earbuds in the case. This will automatically

turn off the earbuds and the Bluetooth.

Play / Pause

Double tap either Touch Sensor [1] or [3]

Increase Volume

Single tap RIGHT Touch Sensor [3]

Decrease Volume

Single tap LEFT Touch Sensor [1]

Previous Track

Tap and hold LEFT Touch Sensor [1]

Skip Track

Tap and hold RIGHT Touch Sensor [3]

Answer / End Call

Double tap either Touch Sensor [1] or [3] .

(Audio is picked up via the microphones [4] .)

Triple tap either Touch Sensor [1] or [3] to activate Siri

or Google Assistant.

Your Voice Assist familiar ‘Beep’ will sound to confirm

connection. You can now ask Siri or Google Assistant a

question or state a command.

LET’S ASK GOOGLE

ASSISTANT / SIRI

This product can be recycled.

Products bearing this symbol must NOT be thrown

away with normal household waste.

Take the product to a collection point designated for

recycling of electronic devices.

Find out more about return and collection points through

your local authority.

LET’S RECYCLE

Check with your doctor before

use if you are fitted with a medical

device such as a pacemaker or a

programmable shunt.

Ensure the product is correctly

connected using the manufacturer’s

original accessories included with

the product.

Do NOT make unauthorized

alterations to this product.

Product may contain small parts

which can be a choking hazard.

Please keep the product out of reach

from children under 6

and animals.

Whilst this product has been made

using hypo-allergenic materials, you

may suffer some skin irritation after

prolonged use.

Do NOT listen to loud music

for a long duration of time. We

recommend turning the volume

down before placing the device in

your ears to avoid

hearing damage.

Do NOT use the product while

operating machinery, including cars,

trucks or other vehicles.

Do NOT use noise cancelling mode

or use your device in areas where

the use of hearing is required for

safety. e.g., while riding a bicycle, at

a construction site or railroad etc.

Clean only with a dry cloth - Wipe

off sweat from the earbuds and the

charging case before charging.

IMPORTANT!

Do NOT use a non-certified PD

or QC3 wall charger as this may

damage the product. Only use the

cable supplied to charge

your device.

If your product has become

damaged in any way, does not

operate normally or has been

dropped, please refer to a qualified

person to have the product checked

before continuing to use it.

WARNING:

This product contains a Lithium

battery. Incorrect disposal of this

battery may result in an explosion.

The operating temperature range for

this product is 5º - 40º celsius.

Please avoid exposing the product,

charging case and cable connectors

to prolonged rain, moisture, or liquid

spills/splashing.

Please remove your device from

your ears immediately if they emit

any loud unusual noise or you

experience a warming sensation.

If you experience any of the issues

listed above, please turn off your

device and contact MIXX Ltd on

[email protected]

LET’S BE SAFE

IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.

For your protection

Clean only with a dry cloth - Wipe

off sweat from the earbuds and the

charging case before charging.

IMPORTANT!

Do NOT use a non-certified PD

or QC3 wall charger as this may

damage the product. Only use the

cable supplied to charge

your device.

If your product has become

damaged in any way, does not

operate normally or has been

dropped, please refer to a qualified

person to have the product checked

before continuing to use it.

WARNING:

This product contains a Lithium

battery. Incorrect disposal of this

battery may result in an explosion.

The operating temperature range for

this product is 5º - 40º celsius.

Please avoid exposing the product,

charging case and cable connectors

to prolonged rain, moisture, or liquid

spills/splashing.

Please remove your device from

your ears immediately if they emit

any loud unusual noise or you

experience a warming sensation.

If you experience any of the issues

listed above, please turn off your

device and contact MIXX Ltd on

[email protected]

IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.

FR: GUIDE DE

DÉMARRAGE RAPIDE

Une notification vocale : «Battery low» vous indique une

autonomie de 2 minutes avant que l’écouteur ne s’éteigne,

indiquant : «Battery low, power off». La lumière LED de

l’écouteur [2] clignotera une fois en BLANC puis s’éteindra.

Chargez vos écouteurs à l’aide du boîtier de charge portable [5]

Pendant le chargement, chaque voyant LED des écouteurs [2]

sera BLANC et une fois complètement chargé, les voyants LED

s’éteindront. Sécuriser les écouteurs en fermant le couvercle.

Lorsque les oreillettes sont placées à l’intérieur de l’étui et que

le couvercle est fermé, le voyant de charge (7) s’allume en

BLANC pendant 4 secondes pour indiquer la charge.

CHARGE

Remarque : si vos écouteurs et l’étui de recharge ne sont

pas alimentés lorsque vous les déballez pour la première

fois, placez les écouteurs dans l’étui de recharge et branchez

l’étui de recharge sur un port USB à l’aide du câble USB C [8]

fourni.

Écouteurs :

CONSEIL: CHARGE RAPIDE EN 15 MINUTES

Si vous manquez d’énergie, chargez vos écouteurs dans

l’étui pendant 15 minutes et bénéficiez de 2 heures

de temps de lecture supplémentaire lors de vos

déplacements.

Boîtier de charge portable

Retirez les deux écouteurs du boîtier de charge portable [5] .

Ils seront automatiquement jumelés ensemble ; une invite vocale «Power on,

pairing» et un «Bip» retentira. Le voyant LED des écouteurs [2] clignotera

en BLANC pour indiquer le mode d’appairage. Si les écouteurs ne s’apparient

pas automatiquement, appuyez 4 fois sur chaque Capteur Tactile [1] and

[3] pour l’éteindre, puis remettez-les tous les deux dans l’étui. Retirez les

écouteurs et ils devraient automatiquement s’apparier ensemble.

Accédez aux paramètres Bluetooth de votre appareil et sélectionnez

«MIXX Streambuds Blend 2» dans la liste. Une fois l’appairage réussi, vous

entendrez «Connected» et les voyants lumineux [2] s’éteindront.

Vous pouvez maintenant profiter de votre musique, regarder une vidéo ou

prendre un appel mains libres.

Les écouteurs se connecteront automatiquement au dernier appareil utilisé

et confirmeront leur appairage par «Connected».

Remettre les deux écouteurs dans l’étui de chargement portable [5] les

éteindra. (Remarque - si les écouteurs ne s’éteignent pas, la batterie de votre

boîtier de charge doit être rechargée - voir “Charge”.)

Premier appairage

CONNEXION

JOUONS

Allumer

Retirez les deux écouteurs de l’étui. Ils s’allumeront

automatiquement et s’apparieront ensemble. Une invite

vocale indiquera « Connected » comme confirmation. Pour

allumer manuellement, Appuyez longuement sur chaque

Capteur Tactile [1] et [3] pendant 3 secondes.

Éteindre

Placez les deux oreillettes dans le boîtier. Cela désactivera

automatiquement les écouteurs et le Bluetooth.

Lecture / Pause

Appuyez deux sur le capteur tactile [1] ou [3]

Augmenter le volume

Appuyez une fois sur le capteur tactile DROIT [3]

Baisser le volume

Appuyez une fois sur le capteur tactile GAUCHE [1]

Piste précédente

Pressez et maintenir appuyé le capteur tactile GAUCHE [1]

Saut Piste

Pressez et maintenir appuyé le capteur tactile DROIT [3]

Répondre / Mettre fin à l’appel

Appuyez deux sur le capteur tactile [1] ou [3]

(Le son est capté via les microphones [4] .)

Connectez toujours le boîtier via le port USB C [6] , à un chargeur mural

USB approprié, au port USB d’un ordinateur ou à une banque d’alimentation à

l’aide du câble de charge USB C (8) fourni. Branchez le câble fourni dans le

port USB C [6] du boîtier de charge.

Le voyant de charge (7) clignotera en ROUGE, allumé et éteint, pour indiquer

que le boîtier est en charge.

8FR