MooreCo Compass Cabinet TV Mount Assembly Instructions
- Taper
- Assembly Instructions
Compass Cabinet TV Mount
UPDATED AS OF: 07/21/2021 1 of 7
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!
P1 - Crossbrace
P2 - Left Insert
P3 - Right Insert
P4 - Upright
P5 - Mount Frame
P6 - Mount Bracket
x1
x1
x1
x2
x1
x2
A - CS M6 x 12mm
B - PH M6 x 40mm
C - PH M6 x 12mm
D - Washer
E - M6 Lock Nut
F - M6 x 95mm
x8
x4
x4
x8
x4
x2
Parts List
UPDATED AS OF: 07/21/2021 2 of 7
Hardware
For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
For questions on assembly or missing/damaged parts, please contact us using the
following information.
Para preguntas sobre el ensamblaje o piezas faltantes o dañadas, por favor
contáctenos usando la siguiente información.
Pour toute question sur le montage l-assamblage manquantes ou endommagées,
veuillez nous contacter en utilisant les l’information ci-dessous.
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
CARE & MAINTENANCE
PRODUCT REGISTRATION
UPDATED AS OF: 07/21/2021 3 of 7
Phone:
1.800.749.2258
(Monday – Friday, 8AM – 5PM
Central Time)
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Email:
support@moorecoinc.com
Previo a comenzar el proceso de
ensamblaje favor de revisar las
instrucciones y asegurarse que cuenta con
todas las partes y materiales necesarios.
Es posible que los muebles grandes o
pesados, requieran mas de una persona
para ensamblarlos correctamente. Por
favor contacte al fabricante directamente
si tiene alguna duda o pregunta antes de
continuar con el proceso de armado del
producto. La garantía no cubrirá daños
que ocurrieron por errores cometidos
durante el proceso de ensamblaje. Todos
los tornillos deben estar ajustados previo
el uso del producto. Debe revisar los
tornillos periódicamente, por lo menos
cada seis meses y asegurarse de que
estén bien ajustados. Por favor detenga
el uso del producto si partes del producto
se pierden, rompen, se deterioran por uso
o se rompen. Favor de contactar a su
distribuidor para que le envíen las partes
necesarias o realice las reparaciones
necesarias con partes autorizadas por el
fabricante.
Avant de commencer l’ assamblage
veuillez consulter les instructions
complètes et vérier si vous avez toutes
les pièces nécessaires. Ill est possible que
plusieurs personnes soient nécessaires
pour assemble des meubles grand ou
lourds. En cas de doute sur l assamblage
contactez le fabricant avant de continuer.
Les dommages encourus pendant
l’assamblage ne seront pas couvert par
la garantie. Ne pas utiliser le produit sans
vérier que tous les vis soient serrées.
Vériez que les vis sont serrées au moins
tous le 6 mois. Si aucune pièce se casse,
manque, est endommagée ou usée,
arrêtez d’ utiliser de produit jusqu’à ce
que le vendeur le repaire a l’aide de pièces
autorisées par la fabricant.
ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS
STEP 1
UPDATED AS OF: 07/21/2021 4 of 7
STEP 2
Insert Uprights into cut outs in Crossbrace. Insert screws through bottom of Crossbrace
to secure Uprights in position. Ensure holes in Uprights are facing direction shown.
Remove casting retainer screws from interior of cabinet. Set screws aside. Slide in
Mount Inserts through slots in castings making sure that Inserts are oriented correctly
with holes closer to back of cabinet. Flat side of Mount Inserts should face inside.
P1
P4
A
P3
P2
Left Right
STEP 3
UPDATED AS OF: 07/21/2021 5 of 7
STEP 4
Position Crossbrace with Uprights in between Mount Inserts and line up holes. Secure
with screws (B) and washers and cap with lock nut. Inserts should be level with Crossbrace
after tightening.
Replace all casting retainer screws
removed in Step 2.
B
D
E
If unable to thread screws, inserts
are not at correct height and need
adjusting.
STEP 5
UPDATED AS OF: 07/21/2021 6 of 7
STEP 6
Attach Mount Frame to Uprights at desired height with washers and screws (C). See chart
for panel display size & weight limits at high and low settings for both cabinet sizes
(2 wide with highest setting shown).
D
C
3 WIDE Max Size
(Diagonal)
Max
Weight
Lowest
Setting 70” 160 lbs
Highest
Setting 85” 120 lbs
2 WIDE Max Size
(Diagonal)
Max
Weight
Lowest
Setting 70” 150 lbs
Highest
Setting 85” 110 lbs
P5
Attach TV Mount Brackets to back of flat panel display with necessary hardware (not
provided). Brackets shoud be oriented as shown and centered on display.
P6
WORKS WITH
VESA SIZES:
75 x 75
100 x 100
200 x 100
200 x 200
300 x 200
300 x 300
400 x 200
400 x 300
400 x 400
600 x 400
800 x 600
STEP 7
UPDATED AS OF: 07/21/2021 7 of 7
THIS COMPLETES ASSEMBLY INSTRUCTION
Hang Flat Panel on TV Mount by first hooking top of brackets to Mount Frame. Secure
in place by inserting screws (D) through holes on brackets and tightening into Mount
Frame until snug.
F
-
1
-
2
-
3
-
4
-
5
-
6
-
7
MooreCo Compass Cabinet TV Mount Assembly Instructions
- Taper
- Assembly Instructions
dans d''autres langues
- English: MooreCo Compass Cabinet TV Mount
- español: MooreCo Compass Cabinet TV Mount