Adlink NEON-2000-JNO Series Starter Kit Le manuel du propriétaire

NEON-2000-JNO Series

AI Smart Camera

User’s Manual

Manual Rev.: 1.0

Revision Date: January 31, 2023

Part No: 50M-00107-1000

ii

Revision History

Revision Release Date Description of Change(s)

1.0 2023-01-31 Initial release

iii

NEON-2000-JNO

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

Disclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, spe-

cial, incidental, or consequential damages arising out of the use or

inability to use the product or documentation, even if advised of

the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global

environmental preservation through compliance with the Euro-

pean Union's Restriction of Hazardous Substances (RoHS) direc-

tive and Waste Electrical and Electronic Equipment (WEEE)

directive. Environmental protection is a top priority for ADLINK.

We have enforced measures to ensure that our products, manu-

facturing processes, components, and raw materials have as little

impact on the environment as possible. When products are at their

end of life, our customers are encouraged to dispose of them in

accordance with the product disposal and/or recovery programs

prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

iv

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

ATTENTION: Informations destinées à prévenir les blessures

corporelles mineures, les dommages aux composants, la perte

de données et/ou la corruption de programme lors de l'exécu-

tion d'une tâche.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les bles-

sures corporelles graves, les dommages aux composants, la

perte de données et/ou la corruption de programme lors de

l'exécution d'une tâche spécifique.

v

NEON-2000-JNO

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

List of Figures....................................................................... vii

List of Tables.......................................................................... ix

1 Introduction ........................................................................ 1

1.1 Overview.............................................................................. 1

1.2 Features............................................................................... 2

1.3 General Specifications......................................................... 3

1.4 Mechanical Dimensions....................................................... 6

1.5 Accessories ......................................................................... 8

2 Connectors and I/O............................................................ 9

2.1 Bottom Side I/O and Connector Description...................... 10

2.2 Top Side I/O and Connector Description........................... 13

2.3 Front Side I/O and Connector Description......................... 15

3 Getting Started ................................................................. 17

3.1 Mounting............................................................................ 17

3.2 Digital I/O Connection Example......................................... 18

3.3 Attaching a Lens................................................................ 19

3.4 Power and Peripheral Connections ................................... 20

3.5 Log In................................................................................. 22

3.6 Image Capture and Inference............................................ 23

3.7 Neon-20XA Trigger Control............................................... 24

Important Safety Instructions.............................................. 27

Consignes de Sécurité Importante...................................... 29

Getting Service...................................................................... 31

vi

This page intentionally left blank.

vii

NEON-2000-JNO

List of Figures

Figure 2-1: NEON-2000-JNO Orientation..........................................9

Figure 2-2: Bottom Side I/O and Connectors...................................10

Figure 2-3: D-sub I/O Connector......................................................11

Figure 2-4: DC Jack Connector........................................................12

Figure 2-5: Top Side I/O and Connectors........................................13

Figure 2-6: Wafer Connector............................................................14

Figure 2-7: Front Side I/O and Connectors......................................15

Figure 3-1: NEON-2000-JNO Mounting Holes.................................17

Figure 3-2: Digital Input Schematic Diagram ...................................18

Figure 3-3: Digital Output Schematic Diagram.................................18

Figure 3-4: Lens Attachment Assembly...........................................19

Figure 3-5: Separate Power and Peripheral Connections................20

Figure 3-6: Combined Power and Peripheral Connections..............21

Figure 3-7: Neon-20XA Trigger API Function Options.....................24

viii

This page intentionally left blank.

ix

NEON-2000-JNO

List of Tables

Table 1-1: NEON-2000-JNO Model and Sensor Specifications ..1

Table 1-2: NEON-2000-JNO General Specifications...................4

Table 2-1: Bottom Side I/O and Connectors..............................10

Table 2-2: D-sub I/O Connector Pin Definitions.........................11

Table 2-3: D-sub I/O Connector Specification ...........................12

Table 2-4: DC Jack Pin Definitions............................................12

Table 2-5: Top Side I/O and Connectors...................................13

Table 2-6: Wafer Connector Pin Definitions ..............................14

Table 2-7: Front Side I/O and Connectors.................................15

x

This page intentionally left blank.

Introduction 1

NEON-2000-JNO

1 Introduction

1.1 Overview

The NEON-2000-JNO series is an open camera platform

equipped with an NVIDIA® Jetson™ Nano module supporting a

series of image sensors providing industrial DI/O capabilities. It is

designed for deep learning inference or other vision applications

that requires a GPU at the edge. The system has Ubuntu Linux,

Jetpack, camera driver and utilities pre-installed to save integra-

tion effort and avoid compatibility issues.

The following table describes the current NEON-2000-JNO mod-

els with their respective sensor specifications.

Camera

Model Image Sensor Sensor

Vendor Sensor

Module Sensor

Output Image

Capturing

NEON-

201A-

JNO

1/2.6”, 2M,

Global Shutter,

1920x1200,

60fps, Color

onsemi AR0234 mipi V4L2/

Gstreamer

NEON-

202A-

JNO

1/1.8”, 8M,

Rolling

Shutter,

3840x2160,

60fps, Color

Sony IMX334 mipi V4L2/

Gstreamer

Table 1-1: NEON-2000-JNO Model and Sensor Specifications

2Introduction

1.2 Features

XProvides rich sample code and AI development, quick to

start

XCPU: Quad-Core Arm® Cortex®-A57 MPCore processor

XGPU: NVIDIA Maxwell architecture with 128 NVIDIA

CUDA® cores and 16GB eMMC

XUSB3 sensor interface compatible with the most machine

vision software

XType-C connector supports DC power, DisplayPort and

USB signal, reducing cabling

XPreinstalled Ubuntu and software suite on microSD card,

plug and play

XHighly integrated and compact system that is easy to deploy

Introduction 3

NEON-2000-JNO

1.3 General Specifications

X

Lens mount: C-mount

X

Total weight: <700g (without lens)

X

Operating temperature (tested with YOLOv4)

Z

NEON-20XA-JNO series, 0°C to 55°C with 0.6 m/s

airflow at 15W mode

X

Power consumption: <40W

X

Computing module: NVIDIA Jetson Nano

Z

CPU: Quad-Core Arm® Cortex®-A57 MPCore processor

Z

GPU: NVIDIA Maxwell architecture with 128 NVIDIA

CUDA® cores

Z

Built-in memory and storage: 4 GB 64-bit LPDDR4, 1600MHz

25.6 GB/s, 16GB eMMC and 32G microSD card

X

Camera I/O and connectors

Z

1x Type-C for power input, DisplayPort and USB signals

Z

1x DC Jack for 12-24V DC input

Z

1x GbE Ethernet port

Z

1x 15-pin D-sub for DI/O and COM which includes:

Z

4x GPI/O, including 1x Camera Trigger In and 1x Trigger Out

Z

1x COM

Z

1x 32G microSD card with preinstalled OS and required

software

Z

1x wafer connector and 1x Micro-USB for system flashing

and debugging

NOTE:

1. When powering from the DC Jack, the Type-C connector can

provide 3W of power to an external device such as a Type-C

hub. Devices requiring more than 3W cannot be used.

2. DC power can be from the Type-C connector or DC jack.

3. Use only recommended ADLINK power adapters.

4. The camera boots from the preinstalled microSD card

that cannot be removed. To change the microSD card,

constant ADLINK.

4Introduction

Model NEON-201A-JNO NEON-202A-JNO

Image Sensor

Resolution (HxV) 1920x1200 3840x2160

Resolution 2M 8M

Frame Rate (fps) 60 30

Color/Mono Color Color

Shutter Global Rolling

Sensor Size 1/2.6" 1/1.8"

Pixel Size (µm) 3 x 3 2.0 x 2.0

Sensor Vendor onsemi Sony

Sensor Model AR0234 IMX334

Image Capturing Software V4L2 & Gstreamer

Image Sensor Trigger Mode External HW trigger,

SW trigger, free run SW trigger, free run

Lens Mount C Mount

System

Computing Platform NVIDIA Jetson Nano

CPU 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6

MB L2 + 4 MB L3

Supported OS Ubuntu 18.04

GPU NVIDIA Maxwell architecture with 128 NVIDIA

CUDA® cores

Storage 16G eMMC (built-in Nano module) and pre-

installed 32G microSD card

Memory 8 GB 128-bit LPDDR4/16G eMMC

(built-in Nano module)

Table 1-2: NEON-2000-JNO General Specifications

Introduction 5

NEON-2000-JNO

Connectors and Functions

Ethernet Supports 10/100/1000 Mb

USB Type C

Video output (DisplayPort), 1920x1080 @ 30fps

1x USB3 and 1x USB2

Power supply for the camera

(when connected to Type-C charger or adaptor)

Power supply (5 W) for external Type-C Hub

(when connected to Type-C hub)

D-sub 4x DI and 4x DO

1x UART (TXD, RXD, GND)

Micro USB USB OTG (for system flash)

Wafer Connector For system flash

Mechanical & Power

Dimensions 123.3 x 77.5 x 66.81 mm

Weight 700g

Power Input DC Jack (12-24V DC) or Type-C (15V DC)

Power Consumption <40W (camera only)

Environmental & Certification

Operating Temperature

0°C to 55°C

Storage Temperature -20°C to 70°C

Humidity 40% to 75% (non-condensing)

Vibration Operating, 5 to 500 Hz, 5 Grms, 3 axes

Shock Operating, 11ms duration, 30G, half sine, 3 axes

ESD Contact +/- 4kV, Air +/- 8kV

EMC CE and FCC Class A (EN61000-4/-2)

Safety UL and cB

Model NEON-201A-JNO NEON-202A-JNO

Table 1-2: NEON-2000-JNO General Specifications

6Introduction

1.4 Mechanical Dimensions

This section provides dimensions and related mechanical informa-

tion for the NEON-2000-JNO.

1.4.1 Camera Dimensions

Dimensions: mm

123.30

7.35

36

30

66.81

80

64

108

63

M4 M4

M4M4

M4 M4

Introduction 7

NEON-2000-JNO

1.4.2 USB Type-C Screw Lock Location and Dimensions

1.4.3 LED Light Mounting Thread

6.80

4.50

Dimensions: mm

Metric thread

M60x1.5mm

8Introduction

1.5 Accessories

Use ADLINK recommended accessories for optimum system per-

formance. The table below includes ADLINK verified accessories.

Accessory Part Number Description

USB Type-C cable 30-01284-0030-A0 USB Type-C (M) to USB Type-C

(M), length 1.8M, with screw lock

USB Type-C

Hub & Adapter 92-99090-1010 AC 100-240V, USB – C PD2.0,

DC 15V/2.3A

DI/O cable 30-01332-0010-A0 DB15P (M) to DB37P (M), length

3M, connected to DIN-37D-01

DIN-37D-01

DI/O extension board 91-14025-1020 DI/O extension board with one

37-pin D-sub connector and

DIN-rail mount

8mm lens 92-15731-0010 Focal length 8mm, F1.4, 2/3”, 3MP

AC/DC adaptor 31-62156-1010-A0 AC 100-240V DC, 12V/5A, DC jack

Connectors and I/O 9

NEON-2000-JNO

2 Connectors and I/O

This chapter includes the locations and descriptions of the

connectors and I/O found on the NEON-2000-JNO.

Figure 2-1: NEON-2000-JNO Orientation

Top Side Top Side

Bottom Side Bottom Side

Front

Side

Back

Side

10 Connectors and I/O

2.1 Bottom Side I/O and Connector Description

Figure 2-2: Bottom Side I/O and Connectors

Table 2-1: Bottom Side I/O and Connectors

Item Description

1• DC Jack for DC input with included ADLINK AC/DC adaptor

(P/N 31-62156-1010-A0)

• Power input: 12-24V DC at >30 W

2• USB Type-C connector w/ screw lock

• Supports DisplayPort (up to 1080P @ 30 fps)

• The NEON-2000-JNO can be powered via this port or the DC jack

3 1 GbE LAN at 10/100/1000 Mbit/s

415-pin D-sub I/O connector for the digital I/O and UART. Use to connect

external I/O devices such as sensors, COM and LED/strobe controllers.

1

2

3

4

La page est en cours de chargement...

Adlink NEON-2000-JNO Series Starter Kit Le manuel du propriétaire

Ce manuel convient également à

Adlink NEON-2000-JNO Series Starter Kit Le manuel du propriétaire

dans d''autres langues