Simplicity 2691108-01 Manuel utilisateur

Not for

Reproduction

1755896

Revision C

en

Operator’s Manual

Felhasználói kézikönyv

de

hu

Bedienungsanleitung

cs

Návod k obsluze

Manuale dell’operatore

it

lt

Vartotojo vadovas

Manual del usuario

es

nl

Gebruikershandleiding

no

Brukerhåndbok

RDLT Series (CE/Export)

Mfg. No. Description

2691107-00 Rear Discharge Lawn Tractor and Mower Deck 107 cm

2691107-01 Rear Discharge Lawn Tractor and Mower Deck 107 cm

2691108-00 Rear Discharge Lawn Tractor and Mower Deck 107 cm

2691108-01 Rear Discharge Lawn Tractor and Mower Deck 107 cm

2691113-00 Rear Discharge Lawn Tractor and Mower Deck 96 cm

2691113-01 Rear Discharge Lawn Tractor and Mower Deck 96 cm

2691114-00 Rear Discharge Lawn Tractor and Mower Deck 96 cm

2691114-01 Rear Discharge Lawn Tractor and Mower Deck 96 cm

SNAPPER is a registered trademark of Briggs & Stratton Corporation.

Manuel de l’opérateur

fr

Not for

Reproduction

2

Not for

Reproduction

5

A

B

6

A

4

A

D

B

C

3

Not for

Reproduction

4

A

B

A

8

9

10

C

E

A

G

F

H

B

D

E

7

Not for

Reproduction

5

13

C

11

14

B

A

C

A

B

D

12

A

Not for

Reproduction

6

Not for

Reproduction

CONTENTS

Illustrations .......................................................................................................... 3

Operator Safety ...................................................................................................8

Features and Controls ......................................................................................16

Operation ...........................................................................................................19

Safety Interlock System Tests .......................................................................... 19

Maintenance ......................................................................................................24

Troubleshooting ................................................................................................ 28

 .................................................................................................... 30

Warranty .............................................................................................................31

General Information

Thank you for purchasing this quality-built riding mower. When operated and maintained according to the instructions in

this manual, your product will provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with riding mowers and

how to avoid them. This riding mower is designed and intended only for cutting grass and is not intended for any other

purpose. It is important that you read and understand these instructions thoroughly before attempting to start or operate

the equipment. Save these original instructions for future reference.

The Illustrated Parts List for this machine can be downloaded

from snapper-europe.com. Please provide model and serial

number when ordering replacement parts.

7

Record your model name/number, manufacturer’s

identication numbers, and engine serial numbers in the space

provided for easy access. These numbers can be found in the

locations shown.

When contacting your authorized dealer for replacement

parts, service, or information you MUST have these

numbers.

A. Manufacturer’s Identication Number

B. Manufacturer’s Serial Number

C. Manufacturer’s Name and Address

D. Maximum Engine Speed in Rotations per Minute

E. Power Rating in Kilowatts

F. Mass of Unit in Kilograms

G. CE Compliance Logo

H. Year of Manufacture

I. Guaranteed Sound Power in Decibels

PRODUCT REFERENCE DATA

Model Description Name/Number

Unit MFG Number Unit Serial Number

Mower Deck MFG Number Mower Deck Serial Number

Dealer Name Date Purchased

ENGINE REFERENCE DATA

Engine Make Engine Model

Engine Type/Spec Engine Code/Serial Number



Product Reference Data

C

B

A

D

E

F

G

H

I

MODEL NO. xxxxxxx

SERIAL NO. xxxxxxxxxx

20xx

x.x kW

xxxx min

-1

xxx

dB

xxx kg

XXXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

“Vibration measurement uncertainty – machine vibration

was recorded using methods and procedures outlined in the

appropriate International Standards in eect at the time of

manufacture. The uncertainties due to the measurement may

result in a variance of up to 5% from the published value shown

in the Declaration of Conformity.”

en

Not for

Reproduction

WARNING

Certain components in this product and its related ac-

cessories contain chemicals known to the State of California to

cause cancer, birth defects, or other reproductive harm. Wash

hands after handling.

WARNING

Battery posts, terminals, and related accessories contain

lead and lead compounds - chemicals known to the State of

California to cause cancer, birth defects, or other reproductive

harm. Wash hands after handling.

WARNING

The engine exhaust from this product contains chemicals

known to the State of California to cause cancer, birth defects, or

other reproductive harm.

Important Safety Instructions

SAVE THESE INSTRUCTIONS - This manual contains impor-

tant instructions that should be followed during the initial set-up,

the operation, and the maintenance of the equipment. Save

these original instructions for future reference.

The safety alert symbol is used to identify safety informa-

tion about hazards that can result in personal injury. A signal

word (DANGER, WARNING, or CAUTION) is used with the

alert symbol to indicate the likelihood and the potential severity

of injury. In addition, a hazard symbol may be used to represent

the type of hazard.

NOTICE indicates a situation that could result in damage to

the product.

Fire

Moving Parts Shock

Stop

Toxic Fumes

Kickback

Explosion



Choke

Fuel

Hot SurfaceHazardous

Chemical

Wear Eye

Protection

Read

Manual

Fast

Slow

Oil

Safety Symbols and Meanings

WARNING

Running engine gives o carbon monoxide, an odorless,

colorless, poison gas.

Breathing carbon monoxide can cause headache, fatigue,

dizziness, vomiting, confusion, seizures, nausea, fainting

or death.

• Operate equipment ONLY outdoors.

• Keep exhaust gas from entering a conned area through

windows, doors, ventilation intakes, or other openings.

Roll-Over

Hazard

Amputation

Hazard

Fuel



Operator Safety

8

DANGER indicates a hazard which, if not avoided, will

result in death or serious injury.

WARNING indicates a hazard which, if not avoided,

could result in death or serious injury.

WARNING

Running engines produce heat. Engine parts, especially

muer, become extremely hot.

Severe thermal burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc.

can catch re.

• Allow muer, engine cylinder and ns to cool before

touching.

• Remove accumulated debris from muer area and

cylinder area.

• It is a violation of California Public Resource Code, Section

4442, to use or operate the engine on any forest-covered,

brush-covered, or grass-covered land unless the exhaust

system is equipped with a spark arrester, as dened in

Section 4442, maintained in eective working order. Other

states or federal jurisdictions may have similar laws. Con-

tact the original equipment manufacturer, retailer, or dealer

to obtain a spark arrester designed for the exhaust system

installed on this engine.

CAUTION indicates a hazard which, if not avoided,

could result in minor or moderate injury.

Not for

Reproduction

Operating Safety

Power equipment is only as safe as the operator. If it is

misused, or not properly maintained, it can be dangerous!

Remember, you are responsible for your safety and that of those

around you. Use common sense, and think through what you are

doing. If you are not sure that the task you are about to perform

can be safely done with the equipment you have chosen, ask a

professional: contact your local authorized dealer.

Read the Manual

The operator’s manual contains important safety information you

need to be aware of BEFORE you operate your unit as well as

DURING operation.

Safe operating techniques, an explanation of the product’s features

and controls, and maintenance information is included to help you

get the most out of your equipment investment.

Be sure to completely read the Safety Rules and Information found

on the following pages. Also completely read the Operation section.

Children

Tragic accidents can occur with children. Do not allow them

anywhere near the area of operation. Children are often

attracted to the unit and mowing activity. Never assume that

children will remain where you last saw them. If there is a

risk that children may enter the area where you are mowing,

have another responsible adult watch them.

DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This

encourages them to come near the unit in the future while it

is running, and they could be seriously hurt. They may then

approach the unit for a ride when you are not expecting it,

and you may run over them.

Reverse

Do not mow in reverse unless

absolutely necessary.

Always look down and

behind before and while

traveling in reverse even

with the mower blades

disengaged.

Safe Operation Practices

9

en

Not for

Reproduction

3.5 ft

(1,5 m)

20.0 ft (6,0 m)

Slope Operation

You could be seriously injured or even killed if you use this unit on too

steep an incline. Using the unit on a slope that is too steep or where you

don’t have adequate traction can cause you to lose control or roll over.

A good rule of thumb is to not operate on any slope you cannot back up

(in 2-wheel drive mode). You should not operate on inclines with a slope

greater than a 3.5 foot rise over a 20 foot length. Always drive up and

down slopes: never cross the face.

Also note that the surface you are driving on can greatly impact stability

and control. Wet grass or icy pavement can seriously aect your ability

to control the unit.

If you feel unsure about operating the unit on an incline, don’t do it. It’s

not worth the risk.

Moving Parts

This equipment has many moving parts that can injure you or someone else.

However, if you are seated in the seat properly and follow all the rules in this book,

the unit is safe to operate.

The mower deck has spinning mower blades that can amputate hands and feet.

Do not allow anyone near the equipment while it is running!

To help you, the operator, use this equipment safely, it is equipped with an

operator-present safety system. Do NOT attempt to alter or bypass the system.

See your dealer immediately if the system does not pass all the safety interlock

system tests found in this manual.

Thrown Objects

This unit has spinning mower blades. These blades can pick up and throw

debris that could seriously injure a bystander. Be sure to clean up the area to

be mowed BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or discharge guard

(deector) in place.

Do not allow anyone in the mowing area while the unit is running! If someone

does enter the area, shut the unit o immediately until they leave.

Fuel and Maintenance

Gasoline is extremely ammable. Its vapors are also extremely ammable

and can travel to distant ignition sources. Gasoline must only be used as

a fuel, not as a solvent or cleaner. Fuel should never be stored any place

where its vapors can build up or travel to an ignition source like a pilot

light. Fuel belongs in an approved, plastic, sealed gas can, or in the tractor

fuel tank with the cap securely closed. Spilled fuel needs to be cleaned up

immediately.

Proper maintenance is critical to the safety and performance of your unit.

Be sure to perform the maintenance procedures listed in this manual and be

sure to periodically test the safety system.

10

Not for

Reproduction

GENERAL OPERATION

1. Read, understand, and follow all instructions in the

manual and on the unit before starting.

2. Do not put hands or feet near rotating parts or under

the machine. Keep clear of the discharge opening at

all times.

3. Only allow responsible adults, who are familiar with

the instructions, to operate the unit (local regulations

can restrict operator age).

4. Clear the area of objects such as rocks, toys, wire,

etc., which could be picked up and thrown by the

blade(s).

5. Be sure the area is clear of other people before mow-

ing. Stop the unit if anyone enters the area.

6. Never carry passengers.

7. Do not mow in reverse unless absolutely necessary.

Always look down and behind before and while travel-

ling in reverse.

8. Never direct discharge material toward anyone. Avoid

discharging material against a wall or obstruction. Ma-

terial may ricochet back toward the operator. Stop the

blade(s) when crossing gravel surfaces.

9. Do not operate the machine without the entire grass

catcher, discharge guard (deector), or other safety

devices in place.

10. Slow down before turning.

11. Never leave a running unit unattended. Always dis-

engage the PTO, set parking brake, stop engine, and

remove keys before dismounting.

12. Disengage blades (PTO) when not mowing. Shut o

engine and wait for all parts to come to a complete

stop before cleaning the machine, removing the grass

catcher, or unclogging the discharge guard.

13. Operate the machine only in daylight or good articial

light.

14. Do not operate the unit while under the inuence of

alcohol or drugs.

15 Watch for trac when operating near or crossing

roadways.

16. Use extra care when loading or unloading the unit into

a trailer or truck.

17. Always wear eye protection when operating this unit.

18. Data indicates that operators, age 60 years and

above, are involved in a large percentage of power

equipment-related injuries. These operators should

evaluate their ability to operate the equipment safely

enough to protect themselves and others from injury.

19. Follow the manufacturer’s recommendations for wheel

weights or counterweights.

20. Keep in mind the operator is responsible for accidents

occurring to other people or property.

21. All drivers should seek and obtain professional and

practical instruction.

22. Always wear substantial footwear and trousers. Never

operate when barefoot or wearing sandals.

23. Before using, always visually check that the blades

and blade hardware are present, intact, and secure.

Replace worn or damaged parts.

24. Disengage attachments before: refueling, removing an

attachment, making adjustments (unless the adjust-

ment can be made from the operator’s position).

25. When the machine is parked, stored, or left unat-

tended, lower the cutting means unless a positive me-

chanical lock is used.

26. Before leaving the operator’s position for any reason,

engage the parking brake (if equipped), disengage the

PTO, stop the engine, and remove the key.

27. To reduce re hazard, keep the unit free of grass,

leaves, & excess oil. Do not stop or park over dry

leaves, grass, or combustible materials.

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control

of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This

mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signi-

es important cautions or warnings which must be followed.

TRANSPORTING AND STORAGE

1. When transporting the unit on an open trailer, make

sure it is facing forward, in the direction of travel. If the

unit is facing backwards, wind lift could damage the

unit.

2. Always observe safe refueling and fuel handling prac-

tices when refueling the unit after transportation or

storage.

3. Never store the unit (with fuel) in an enclosed poorly

ventilated structure. Fuel vapors can travel to an ig-

nition source (such as a furnace, water heater, etc.)

and cause an explosion. Fuel vapor is also toxic to

humans and animals.

4. Always follow the engine manual instructions for stor-

age preparations before storing the unit for both short

and long term periods.

5. Always follow the engine manual instructions for

proper start-up procedures when returning the unit to

service.

6. Never store the unit or fuel container inside where

there is an open ame or pilot light, such as in a water

heater. Allow unit to cool before storing.

11

en

Not for

Reproduction

CHILDREN

Tragic accidents can occur if the operator is not alert to the

presence of children. Children are often attracted to the unit

and the mowing activity. Never assume that children will

remain where you last saw them.

1. Keep children out of the mowing area and under the

watchful care of another responsible adult.

2. Be alert and turn unit o if children enter the area.

3. Before and during reverse operation, look behind and

down for small children.

4. Never carry children, even with the blade(s) o. They

may fall o and be seriously injured or interfere with

safe unit operation. Children who have been given

rides in the past may suddenly appear in the mowing

area for another ride and be run over or backed over

by the machine.

5. Never allow children to operate the unit.

6. Use extra care when approaching blind corners,

shrubs, trees, or other objects that may obscure vi-

sion.

EMISSIONS

1. Engine exhaust from this product contains chemicals

known, in certain quantities, to cause cancer, birth de-

fects, or other reproductive harm.

2. Look for the relevant Emissions Durability Period and

Air Index information on the engine emissions label.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-

over accidents, which can result in severe injury or death.

Operation on all slopes requires extra caution. If you cannot

back up the slope or if you feel uneasy on it, do not operate

on it.

Control of a walk-behind or ride-on machine sliding on a

slope will not be regained by the application of the brake.

The main reasons for loss of control are: insucient tire grip

on the ground, speed too fast, inadequate braking, the type

of machine is unsuitable for its task, lack of awareness of

the ground conditions, incorrect hitching and load distribu-

tion.

1. Mow up and down slopes, not across.

2. Watch for holes, ruts, or bumps. Uneven terrain could

overturn the unit. Tall grass can hide obstacles.

3. Choose a slow speed so that you will not have to stop

or change speeds while on the slope.

4. Do not mow on wet grass. Tires may loose traction.

5. Always keep unit in gear especially when traveling

down slopes. Do not shift to neutral and coast down-

hill.

6. Avoid starting, stopping, or turning on a slope. If tires

lose traction, disengage the blade(s) and proceed

slowly straight down the slope.

7. Keep all movement on slopes slow and gradual. Do

not make sudden changes in speed or direction,

which could cause the machine to rollover.

8. Use extra care while operating machines with grass

catchers or other attachments; they can aect the sta-

bility of the unit. Do not use on steep slopes.

9. Do not try to stabilize the machine by putting your foot

on the ground (ride-on units).

10. Do not mow near drop-os, ditches, or embankments.

The mower could suddenly turn over if a wheel is over

the edge of a cli or ditch, or if an edge caves in.

11. Do not use grass catchers on steep slopes.

12. Do not mow slopes you cannot back up them.

13. See your authorized dealer/retailer for recommenda-

tions of wheel weights or counterweights to improve

stability.

14. Remove obstacles such as rocks, tree limbs, etc.

15. Use slow speed. Tires may lose traction on slopes

even through the brakes are functioning properly.

16. Do not turn on slopes unless necessary, and then,

turn slowly and gradually downhill, if possible.



1. Tow only with a machine that has a hitch designed for

towing. Do not attach towed equipment except at the

hitch point.

2. Follow the manufacturer’s recommendations for

weight limit for towed equipment and towing on

slopes.

3. Never allow children or others in or on towed equip-

ment.

4. On slopes, the weight of the towed equipment may

cause loss of traction and loss of control.

5. Travel slowly and allow extra distance to stop.

6. Do not shift to neutral and coast down hill.

12

WARNING

Never operate on slopes greater than 17.6 percent

(10°) which is a rise of 3-1/2 feet (106 cm) vertically in

20 feet (607 cm) horizontally.

When operating on slopes use additional wheel

weights or counterweights. See your dealer/retailer to

determine which weights are available and appropriate

for your unit.

Select slow ground speed before driving onto slope.

In addition to front weights, use extra caution when

operating on slopes with rear-mounted grass catchers.

Mow UP and DOWN the slope, never across the face,

use caution when changing directions and DO NOT

START OR STOP ON SLOPE.

Not for

Reproduction

SERVICE AND MAINTENANCE

Safe Handling of Gasoline

1. Extinguish all cigarettes, cigars, pipes, and other

sources of ignition.

2. Use only approved gasoline containers.

3. Never remove the gas cap or add fuel with the engine

running. Allow the engine to cool before refueling.

4. Never fuel the machine indoors.

5. Never store the machine or fuel container where there

is an open ame, spark, or pilot light such as near a

water heater or other appliance.

6. Never ll containers inside a vehicle or on a truck bed

with a plastic bed liner. Always place containers on

the ground away from your vehicle before lling.

7. Remove gas-powered equipment from the truck or

trailer and refuel it on the ground. If this is not possi-

ble, then refuel such equipment on a trailer with a por-

table container, rather than from a gasoline dispenser

nozzle.

8. Keep nozzle in contact with the rim of the fuel tank or

container opening at all times until fueling is complete.

Do not use a nozzle lock-open device.

9. If fuel is spilled on clothing, change clothing immedi-

ately.

10. Never over-ll the fuel tank. Replace gas cap and

tighten securely.

11. Use extra care in handling gasoline and other fuels.

They are ammable and vapors are explosive.

12. If fuel is spilled, do not attempt to start the engine but

move the machine away from the area of spillage and

avoid creating any source of ignition until fuel vapors

have dissipated.

13. Replace all fuel tank caps and fuel container caps se-

curely.

Service & Maintenance

1. Never run the unit in an enclosed area where carbon

monoxide fumes may collect.

2. Keep nuts and bolts, especially blade attachment

bolts, tight and keep equipment in good condition.

3. Never tamper with safety devices. Check their proper

operation regularly and make necessary repairs if they

are not functioning properly.

4. Keep unit free of grass, leaves, or other debris build-

up. Clean up oil or fuel spillage. and remove any fuel-

soaked debris. Allow machine to cool before storage.

5. If you strike an object, stop and inspect the machine.

Repair, if necessary, before restarting.

6. Never make adjustments or repairs with the engine

running.

7. Check grass catcher components and the discharge

guard frequently and replace with manufacturer’s rec-

ommended parts, when necessary.

8. Mower blades are sharp. Wrap the blade or wear

gloves, and use extra caution when servicing them.

9. Check brake operation frequently. Adjust and service

as required.

10. Maintain or replace safety and instructions labels, as

necessary.

11. Do not remove the fuel lter when the engine is hot as

spilled gasoline may ignite. Do not spread fuel line

clamps further than necessary. Ensure clamps grip

hoses rmly over the lter after installation.

12. Do not use gasoline containing METHANOL, gasohol

containing more than 10% ETHANOL, gasoline addi-

tives, or white gas because engine/fuel system dam-

age could result.

13. If the fuel tank must be drained, it should be drained

outdoors.

14. Replace faulty silencers/muers.

15. Use only factory authorized replacement parts when

making repairs.

16. Always comply with factory specications on all set-

tings and adjustments.

17. Only authorized service locations should be utilized for

major service and repair requirements.

18. Never attempt to make major repairs on this unit un-

less you have been properly trained. Improper service

procedures can result in hazardous operation, equip-

ment damage and voiding of manufacturer’s warranty.

19. On multiple blade mowers, take care as rotating one

blade can cause other blades to rotate.

20. Do not change engine governor settings or over-

speed the engine. Operating the engine at excessive

speed can increase the hazard of personal injury.

21. Disengage drive attachments, stop the engine, re-

move the key, and disconnect the spark plug wire(s)

before: clearing attachment blockages and chutes,

performing service work, striking an object, or if the

unit vibrates abnormally. After striking an object, in-

spect the machine for damage and make repairs be-

fore restarting and operating the equipment.

22. Never place hands near the moving parts, such as a

hydro pump cooling fan, when the tractor is running.

(Hydro pump cooling fans are typically located on top

of the transaxle).

23. Units with hydraulic pumps, hoses, or motors: WARN-

ING: Hydraulic uid escaping under pressure may

have sucient force to penetrate skin and cause

serious injury. If foreign uid is injected into the skin

it must be surgically removed within a few hours by a

doctor familiar with this form of injury or gangrene may

result. Keep body and hands away from pin holes or

nozzles that eject hydraulic uid under high pressure.

Use paper or cardboard, and not hands, to search for

leaks. Make sure all hydraulic uid connections are

tight and all hydraulic hoses and lines are in good con-

dition before applying pressure to the system. If leaks

occur, have the unit serviced immediately by your au-

thorized dealer.

24. WARNING: Stored energy device. Improper re-

lease of springs can result in serious personal injury.

Springs should be removed by an authorized techni-

cian.

25. Models equipped with an engine radiator: WARNING:

Stored energy device. To prevent serious bodily injury

from hot coolant or steam blow-out, never attempt to

remove the radiator cap while the engine is running.

Stop the engine and wait until it is cool. Even then,

use extreme care when removing the cap.

13

en

Not for

Reproduction

Safety Decals

Decal - Main Panel CE

Part No. 1723175

Decal - Roll Release

Part No. 7101935

Decal - Danger, Rotating

Blades

Part No. 1720389

Decal - Danger,

Discharge Tube

Part No. 1721107

Decal - Height of Cut

Part No. 1730264

Decal - Drawbar Warning

Part No. 729677

Decal - Ignition

Switch

Part No. 885749

1723175

(

)

20

LB

(

)

34

LB

_

20 HR

AH

CCA

@18°C

Pb

885627

885540

190

17

Figure 1

14

Decal - Battery

Part No. 885627

Not for

Reproduction

Warning: Read Operator’s Manual.

Read and understand the Operator’s

Manual before using this machine.

Danger: Thrown Objects.

This machine is capable of throwing

objects and debris. Keep bystanders

away.

Warning: Remove Key Before

Servicing.

Remove the key and consult technical

literature before performing repairs or

maintenance.

Danger: Machine Rollover.

Do not use this machine on slopes

greater than 10°.

Danger: Thrown Objects.

Do not operate without rst

connecting the discharge tube.

Danger: Dismemberment.

This machine can amputate limbs.

Keep bystanders and children away

when engine is running.

Danger: Dismemberment.

This mower deck can amputate limbs.

Keep hands and feet away from

blades.

Safety Icons

15

en

Not for

Reproduction

Features and Controls

Figure 2

4

3

2

1

16

Not for

Reproduction

17

Throttle/Choke Control (Choke-A-Matic)

This controls the engine speed and choke (See

Figure 2). Move the throttle/choke control to the

FAST position to increase engine speed, and to the

SLOW position to decrease engine speed. Move

the throttle/ choke control past the FAST position to

the CHOKE position to start a cold engine. A warm

engine may not require choking.

NOTE: Always operate the rider with the throttle/

choke control in the FAST position.



The PTO (Power Take-O) switch engages and

disengages attachments that use the PTO. To en-

gage the PTO, pull UP on the switch. Push DOWN

to disengage. Note that the operator must be seated

rmly in the tractor seat for the PTO to function.

Tractor Controls

Ignition Switch

The ignition switch starts and stops the engine, it has four po-

sitions:

OFF Stops the engine and shuts o the

electrical system.

LIGHTS Allows the headlights to turn on.

ON

RUN Allows the engine to run and powers the

electrical system.

START Cranks the engine for starting.

NOTE: Never leave the ignition switch in the RUN position

with the engine stopped. This drains the battery.

Headlights

This switch turns the tractor headlights on and o.

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of

other PTO driven attachments) while traveling in reverse. If

you choose to mow in reverse, turn the RMO key after the

PTO is engaged. The L.E.D. light will illuminate, and the

operator can then mow in reverse. Each time the PTO is en-

gaged the RMO needs to be reactivated if desired.

Ground Speed Pedals

The tractor’s forward ground speed is controlled by the

forward ground speed control pedal. The tractor’s reverse

ground speed is controlled by the reverse ground speed con-

trol pedal.

Depressing either pedal will increase ground speed. Note that

the further down the pedal is depressed, the faster the tractor

will travel.

Seat Adjustment Lever

The seat can be adjusted forward and back. Move the lever,

position the seat as desired, and release the lever to lock the

seat into position.

Catcher Full Alarm

The “catcher full” alarm sounds when the grass catcher has

been lled with cut grass. When the alarm sounds, disengage

the PTO, travel to the area in which you desire to dump the

grass, then empty the catcher.

NOTE: When using the unit for leaf collection, the alarm may

not be activated by dry leaves.

Parking Brake Knob

This is used to lock the parking brake when the tractor is

stopped. Fully depressing the brake pedal and pulling up on

the knob engages the parking brake.

Cruise Control

The cruise control is used to lock the ground speed control in

forward. The cruise control has ve lock positions.

Brake Pedal

Depressing the brake pedal applies the tractor brake.

Fuel Tank

Pull up tractor hood to access the fuel tank. Turn cap counter-

clockwise to remove.

en

Not for

Reproduction

18

Mower Lift Lever

This controls the mower cutting height. Pull lever to lower the

height and pull up to raise the height. The cutting height is ad-

justable between 2,5 cm (1,0”) and 8,9 cm (3,5”).

Catcher Open/Close Lever

This opens the catcher so that it may be emptied and closes

it for mowing. To empty the catcher, extend the grass catcher

handle and pull forward on the handle. To close, push the

lever backward until the catcher closes and locks. Release

the grass catcher handle.

Transmission Release Lever

This deactivates the transmission so that the tractor can be

pushed by hand. See Pushing the Tractor By Hand.

Not for

Reproduction

Test 1 — Engine should NOT crank if:

• PTO switch is ON, OR

• Brake pedal is NOT fully depressed (parking brake

OFF), OR

• The cruise control lever is NOT in NEUTRAL.

Test 2 — Engine SHOULD crank and start if:

• Operator is sitting in seat, AND.

• PTO switch is OFF, AND

• Brake pedal is fully depressed (parking brake ON),

AND

• The cruise control lever is in NEUTRAL.

Test 3 — Engine should SHUT OFF if:

• Operator rises o seat.

• Collector is not closed when engaging PTO switch.

Test 4 — Check Mower Blade Stopping Time

Mower blades and mower drive belt should come to a

complete stop within ve seconds after electric PTO

switch is turned OFF. If mower drive belt does not stop

within ve seconds, see an authorized dealer.

Test 5 — Check Reverse Mow Option (RMO)

• Engine should shut o if reverse travel is attempted if

the PTO has been switched on and RMO has not been

activated.

• RMO light should illuminate when RMO has been acti-

vated.

Oil Recommendations

We recommend the use of Briggs & Stratton Warranty

Certied oils for best performance. Other high-quality de-

tergent oils are acceptable if classied for service SF, SG,

SH, SJ or higher. Do not use special additives.

Outdoor temperatures determine the proper oil viscosity for

the engine. Use the chart to select the best viscosity for the

outdoor temperature range expected.

* Below 40°F (4°C) the use of SAE 30 will result in hard starting.

** Above 80°F (27°C) the use of 10W-30 may cause increased oil

consumption. Check oil level more frequently.

Safety Interlock System Tests

This unit is equipped with safety interlock switches and

other safety devices. These safety systems are present for

your safety: do not attempt to bypass safety switches, and

never tamper with safety devices.

Operation

19

WARNING

If the unit does not pass a safety test, do not oper-

ate it. See an authorized dealer.

WARNING

Mowing in reverse can be hazardous to bystand-

ers. Tragic accidents can occur if the operator is not alert

to the presence of children. Never activate the RMO if

children are present. Children are often attracted to the unit

and the mowing activity.

Size PSI bar

15 x 6,0 14 0,96

20 x 8,0 10 0,68

Figure 3

Check Tire Pressure

Tires should be checked periodically to provide the

optimum traction and to guarantee the best cut (see

Figure 3).

NOTE: These pressures may dier slightly from the

“Maximum Ination” stamped on the side walls of the tires.

en

Not for

Reproduction

Oil Pressure

If the oil pressure is too low, a pressure switch (if equipped)

will either stop the engine or activate a warning device on

the equipment. If this occurs, stop the engine and check

the oil level with the dipstick.

If the oil level is below the ADD mark, add oil until it reaches

the FULL mark. Start the engine and check for proper pres-

sure before continuing to operate.

If the oil level is between the ADD and FULL marks, do not

start the engine. Contact an authorized dealer to have the

oil pressure problem corrected.

1. Pull up tractor hood to access the fuel tank.

2. Clean the fuel cap area of dirt and debris. Remove

the fuel cap (A, Figure 5).

3. Fill the fuel tank (B) with fuel. To allow for expansion

of the fuel, do not ll above the bottom of the fuel tank

neck.

4. Reinstall the fuel cap.

20

Checking/Adding Oil

Before adding or checking the oil

• Place engine level.

• Clean the oil ll area of any debris.

1. Remove the dipstick (A, Figure 4) and wipe with a

clean cloth.

2. Insert and tighten the dipstick.

3. Remove the dipstick and check the oil level. It should

be at the FULL mark (B) on the dipstick.

4. If low, add oil slowly into the engine oil ll (C). Do not

 After adding oil, wait one minute and then

recheck the oil level.

NOTE: Do not add oil at the quick oil drain (if equipped).

5. Replace and tighten the dipstick.

High Altitude

At altitudes over 1,524 meters (5,000 feet), a minimum 85

octane/85 AKI (89 RON) gasoline is acceptable. To remain

emissions compliant, high altitude adjustment is required.

Operation without this adjustment will cause decreased

performance, increased fuel consumption, and increased

emissions. See an authorized dealer for high altitude ad-

justment information.

Operation of the engine at altitudes below 762 meters

(2,500 feet) with the high altitude kit is not recommended.

Fuel Recommendations

Fuel must meet these requirements:

• Clean, fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKI (91 RON). High alti-

tude use, see below.

• Gasoline with up to 10% ethanol (gasohol) or up to

15% MTBE (methyl tertiary butyl ether) is acceptable.

CAUTION: Do not use unapproved gasolines, such as

E85. Do not mix oil in gasoline or modify the engine to run

on alternate fuels. This will damage the engine compo-

nents and void the engine warranty.

To protect the fuel system from gum formation, mix a fuel

stabilizer into the fuel. See the Storage section. All fuel is

not the same. If starting or performance problems occur,

change fuel providers or change brands. This engine is

certied to operate on gasoline. The emissions control sys-

tem for this engine is EM (Engine Modications).

WARNING

Fuel and its vapors are extremely ammable and

explosive.

Fire or explosion can cause severe burns or

death.

When Adding Fuel

• Turn engine o and let engine cool at least 3 minutes

before removing the fuel cap.

• Fill fuel tank outdoors or in well-ventilated area.

• Do not overll fuel tank. To allow for expansion of the

fuel, do not ll above the bottom of the fuel tank neck.

• Keep fuel away from sparks, open ames, pilot lights,

heat, and other ignition sources.

• Check fuel lines, tank, cap, and ttings frequently for

cracks or leaks. Replace if necessary.

• If fuel spills, wait until it evaporates before starting

engine.

La page est en cours de chargement...

Simplicity 2691108-01 Manuel utilisateur

Ce manuel convient également à

Simplicity 2691108-01 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents