Samsung UN40D6000SF Guide de démarrage rapide

Marque: Samsung

Modèle: UN40D6000SF

Catégorie: Téléviseurs LED

Taper: Guide de démarrage rapide

Ce manuel convient également à

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

E-MANUAL

BN68-03330B-01

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85 Challenger

Road Ridge eld Park, NJ 07660-2112

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 1 2011-02-21 오후 3:52:41

English - 2

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed

to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9

ratio format, or expanded to ﬁll the screen if your model offers this feature with the images constantly in motion. Displaying

stationary graphics and images on the screen, such as the dark side bars on non-expanded standard format television video

and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station logos, web

sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images

for more than 5% of total viewing time can cause uneven aging of your LED display and leave subtle, but permanent burned-

in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving

images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view

different formats as a full screen picture.

Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of

format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.

y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung

Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein,

SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased

in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally

speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to

the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered

are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the

product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles), still image elements (such as TV channel logos, stock or news bars

at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures

can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the

recommendations below:

y Avoid displaying the same TV channel for long periods.

y Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.

y Reduce brightness and contrast to avoid the appearance of after-images.

y Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 2 2011-02-21 오후 3:52:41

English - 3

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Check that there are no accessories hidden behind or under packing materials when you open the box.

y Remote Control (AA59-00442A) & Batteries (AAA x 2)

y Owner’s Instructions

y Power Cord

y Cleaning Cloth

y Warranty Card / Safety Guide

AV/Component Adapter AV Adapter Holder-Ring (4EA) Holder-Wire stand

(BN39-01154W) (BN39-01154H) (BN61-07295A) (BN61-05491A)

Samsung Wireless LAN

Adapter (LED 6050 Series only)

(AK98-01080A)

Input Cables (Sold Separately)

To purchase the RS232 cable, contact www.SamsungParts.com.

RS232 (AA39-00311A) Audio

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 3 2011-02-21 오후 3:52:43

English - 4

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Remote control sensor Aim the remote control towards this spot on the TV.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER

button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display), which contains controls for

your TV’s features.

y Adjusts the volume. In the OSD, use the y buttons as you would use the

◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the z buttons as you would use the

▼ and ▲ buttons on the remote control.

(Power)

Turns the TV on or off.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe

and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on

vacation, for example). It is best to unplug the power cord.

Install the Stand

See the separate stand installation guide for more detailed instructions.

Stand (depending on the model) Guide Stand Screws

x4 (M4 X L12)

1 EA

x4 (M4 X L8)

Control Panel

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 4 2011-02-21 오후 3:52:44

English - 5

✎

NOTE

Make sure to distinguish between the front and back of each component when assembling them.

Make sure that at least two people lift and move the TV.

Assembling the Holder-Wire stand

Side View

(M4 X L8)

(Correct assembly) (Incorrect assembly)

✎

Place a soft cloth over the table to protect the TV, and

then place the TV on the cloth screen side down.

✎

Insert the Stand Guide into the slot of TV bottom side.

Front

(M4 X L12)

Top View

DO NOT USE

CHEMICALS

DO NOT USE

GREASE

DO NOT USE

OIL

ATTENTION

Rear

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 5 2011-02-21 오후 3:52:47

English - 6

Installing the Wall Mount

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you

assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or

injury to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

Install your wall mount on a solid wall perpendicular to the ﬂoor. Before attaching the wall mount to surfaces other than plaster

board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall

and result in severe personal injury.

✎

NOTE

Standard dimensions for wall mount kits are shown in the table below.

Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

Do not use screws that do not comply with the VESA standard screw specifications.

Do not use screws that are longer than the standard length or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set.

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ

depending on the wall mount specifications.

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal

injury. Samsung is not liable for these kinds of accidents.

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or

the consumer fails to follow the product installation instructions.

Our 55” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for

this model.

Do not mount the TV at more than a 15 degree tilt.

Always have two people mount the TV on a wall.

Product Family

TV size in

inches

VESA screw hole

specs (A * B) in

millimeters

Standard Screw Quantity

LED-TV

19~22 75 X 75

23~27 200 X 100

32~40 200 X 200

M846~55 400 X 400

60~65 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to

electric shock.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 6 2011-02-21 오후 3:52:48

English - 7

Remote Control Buttons

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired

persons.

Installing batteries (Battery size: AAA)

✎

NOTE

Use the remote control within 23 feet of the TV.

If you selectedBright light may affect the performance of the

remote control. Avoid using when near special fluorescent

lights or neon signs.

The color and shape may vary depending on the model.

PRE-CH

CH LIST

POWER

2 3

5 6

7 8 9

MUTE

B C D

VOL CH

SMART

ON/OFF

SOURCE

HUB

SOCIAL

T V

E-MANUAL

Turns the TV on and off.

Displays and selects the available video

sources.

Turns the remote control light on or

off. When on, the buttons become

illuminated for a moment when pressed.

(Using the remote control with this button

set to On will reduce the battery usage

time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Support to recommendation search

word and search function.

Displays information on the TV screen.

Exits the menu.

Gives direct access to channels.

Press to select additional digital channels

being broadcast by the same station. For

example, to select channel ‘54-3’, press

‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Opens the OSD.

Quickly select frequently used functions.

Link to various application services.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

Buttons used in the Channel List and

SMART HUB menu, etc.

Use these buttons in SMART HUB and

Anynet+ (HDMI-CEC) modes.

SOCIAL TV: Connect to Social TV

application.

MTS: Press to choose stereo, mono,

or Separate Audio Program (SAP

broadcast).

SRS: Turns the SRS TruSurround HD

on or off.

CC: Displays digital subtitles.

P.SIZE: Lets you choose the Picture

Size.

E-MANUAL: Displays the e-Manual.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 7 2011-02-21 오후 3:52:49

English - 8

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu.

2 ENTER

/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access steps may differ depending on the selected

menu.

MENU The main menu options appear on

the screen:

Picture, Sound, Channel,

Network, System, Support.

▲ / ▼ Select an icon or option with the ▲

or ▼ button.

ENTER

Press ENTER

to access the

sub-menus.

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

ENTER

Press ENTER

to conﬁrm the

selection.

EXIT

Press EXIT.

PRE-CH

CH LIST

UTE

VOL

SMART

SOU

HUB

TV SNS

E-MANUAL

Connecting the power cord and an antenna or cable connection

✎

For the best cable connections to this product, be sure to use cables no thicker than 0.55 inches (14mm).

Maximum thickness - 0.55 inches (14mm)

VHF/UHF Antenna

ANT OUT

AVIN 2

Power Input

Cable

Antenna Cable (Not Supplied)

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 8 2011-02-21 오후 3:52:50

English - 9

Plug & Play (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen prompts will assist in conﬁguring basic settings. To turn on

the TV, press the POWER

button.

✎

Plug & Play is available only when the Source is set to TV.

✎

To return to the previous step in the Plug & Play sequence, select Previous, and then press ENTER

✎

Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 8).

Selecting the OSD

Language

Press the ▲ or ▼ button to select a language. Press ENTER

twice

when done.

Setting up the Network

Set up your network connection. Press the ENTER

button to start. If

you do not know your network set up information or want to set to it later,

select Skip. We suggest you skip network connection setup now and

refer to “Wired/Wireless Network Connection” in the e-Manual for set up

requirements and instructions, and the Network Connection section of this

manual (Page 15). You can set up the network connection later using the

Network menu.

Selecting the usage

mode

Press the ▲ or ▼ button to select Home Use, and then press the ENTER

button twice.

Select the Home Use mode. Store Demo mode is for retail environments.

Setting the Clock

Mode

Press the ▲ or ▼ button to select Auto or Manual, and then press ENTER

twice.

✎

If you selected Auto, you’ll go to the Time Zone and DST screen. Select Time

Zone or DST, and then press ENTER

. On the Time Zone screen, use the ▲ or ▼

button to select your zone, and then press ENTER

. On the DST screen, press,

ENTER

, then select whether to turn DST (Daylight Savings Time) on or off. When

done, press ENTER

✎

If you selected Manual, you’ll go to the Date and Time screen. Select Date or Time,

and then press ENTER

. Then, use the number buttons or the ▲ or ▼ button to

set the date or time. Use the ◄ or ► button to move between entry fields. When

done setting the Date and Time, select Next, and then press ENTER

Selecting search

options for auto tuning

Press the ▲ or ▼ button to select Air or Cable, and then press ENTER

. A check

appears on your selection. Select Next, and then press the ENTER

button. You can

check both if you have both connected.

✎

If you selected Cable, you’ll go to the Cable System screen. Use the ▲ or ▼

button to select Digital or Analog, and then press. ENTER

. Use the ▲ or ▼

button to select the correct cable signal format - STD, HRC, or IRC - and then press

ENTER

. Most cable systems use STD. Select the correct cable signal format for

both the Digital and Analog systems.

✎

When done, select Next, and the press ENTER

Selecting and

memorizing channels

The channel search will start automatically. This can take up to 30 minutes.

For more information, refer to Channel → Auto Program in the e-Manual.

✎

Press the ENTER

button at any time to interrupt the memorization process.

Enjoy your TV. If you want to watch a broadcast program, select Close.

If you want to enjoy Smart Hub, select Smart Hub. Smart Hub will start. For more detailed

information, refer to “Smart Hub” in the e-Manual.

If You Want to Rerun Plug & Play...

MENU → System → Plug & Play → ENTER

✎

NOTE

y To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.

When you see the volume bar on the screen, press and hold the MENU button on the TV for 5 sec.

POWER

INFO

GUIDE

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 9 2011-02-21 오후 3:52:50

English - 10

Connecting to an AV Device

Using an HDMI or an HDMI to DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD player,, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

✎

HDMI IN 1 (DVI), 2 (ARC), 3, 4 / PC/DVI AUDIO IN

For better picture and audio quality, connect to a digital device using an HDMI cable.

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

The picture may not display normally (if at all) or the audio may not work if you connect an external device that

uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer

of the external device about the HDMI version and, if out of date, request an upgrade.

Be sure to use an HDMI cable with a thickness of 14 mm or less.

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may

occur.

We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet is compatible. Note

that this product does not support the Ethernet function via HDMI.

This product supports the ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC

function is supported by the HDMI IN 2 (ARC) port only.

The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port. It can be enabled only when the

TV is connected with an audio receiver that supports the ARC function.

HDMI OUT

DVI OUT

R-AUDIO-L

AUDIO OUT

Device

WhiteRed

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

HDMI Cable (Not Supplied)

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 10 2011-02-21 오후 3:52:51

English - 11

Using a Component (up to 1080p) or an Audio/Video (480i only) Cable

Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR

✎

When connecting to AV IN, the color of the AV IN 1 [VIDEO] jack (green) will not match the video cable (yellow).

✎

For better picture quality, we recommend the Component connection over the A/V connection.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link.

EX-LINK: Connector for service only.

VIDEO OUTAUDIO OUT

R-AUDIO-L

R R RW

VIDEO OUTAUDIO OUT

R-AUDIO-L

PR PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

R R

Device

Red White Red Red

Red

Blue White

White

Green Yellow

Yellow

Audio Cable

(Not Supplied)

Component Cable

(Not Supplied)

Audio Cable

(Not Supplied)

Audio Cable

(Not Supplied)

Video Cable

(Not Supplied)

Video Cable

(Not Supplied)

AV Adapter(Supplied)

Component Adapter

(Supplied)

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 11 2011-02-21 오후 3:52:52

English - 12

Connecting to an Audio Device

Using an Optical (Digital) or an Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, DVD home theater

✎

DIGITAL AUDIO OUT (OPTICAL)

When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a

digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and

and you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If you

want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB

satellite receiver directly to an amplifier or home theater.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.

When connecting, use the appropriate connector.

When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

✎

Your PC may not support an HDMI connection.

AUDIO OUT

PC OUT

AUDIO OUT

DVI OUT

HDMI OUT

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

D-Sub Cable (Not Supplied)

Audio Cable (Not Supplied)

OPTICAL

R-AUDIO-L

AUDIO IN

Audio Cable (Not Supplied)

Optical Cable (Not Supplied)

Ampliﬁer /

DVD home theater

Digital Audio System

Red White

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 12 2011-02-21 오후 3:52:54

English - 13

PC Display Modes (D-Sub and an HDMI to DVI Input)

Optimal PC resolution is 1920 X 1080 @ 60 Hz. You can also select one of the standard resolutions listed in the Resolution

column. The TV will automatically adjust to the resolution you choose.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

1152 x 870

35.000

49.726

68.681

66.667

74.551

75.062

30.240

57.284

100.000

-/-

VESA DMT

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 1024

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1680 x 1050

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

47.712

55.935

70.635

65.290

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.015

59.887

74.984

59.954

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

83.500

106.500

108.000

85.500

106.500

136.750

146.250

-/-

+/+

-/-

+/+

-/+

+/+

-/+

VESA DMT / DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

✎

NOTE

For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

The interlace mode is not supported.

The set may operate abnormally if you select a non-standard video format.

Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 13 2011-02-21 오후 3:52:55

English - 14

Changing the Input Source

Source

Use to select TV or an external input source

such as a DVD player / Blu-ray player / cable

box / STB satellite receiver.

1. Press the SOURCE button on your

remote.

2. Select a desired external input source.

■■ TV / PC / AV1 / AV2 / Component /

HDMI1/DVI / HDMI2 / HDMI3 / HDMI4

/ USB / AllShare

✎

You can only choose external devices that are

connected to the TV. In Source, connected inputs will

be highlighted.

✎

In the Source, PC is always stays activated.

Edit Name

Edit Name lets you associate a device name to an input

source. To access Edit Name, press the TOOLS button In

Source. The following selections appear under Edit Name:

■ VCR / DVD / Cable STB / Satellite STB / PVR STB

/ AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

✎

If you have connected a PC to the HDMI IN 1 (DVI) port

with an HDMI cable, select PC under Edit Name to

enter a device name.

✎

If you have connected a PC to the HDMI IN 1 (DVI)

port with an HDMI to DVI cable, select DVI PC under

Edit Name to enter a device name.

✎

If you connected an AV device to the HDMI IN 1 (DVI)

port with an HDMI to DVI cable, select DVI Devices

under Edit Name to enter a device name.

Edit Favorites

In Source, press the TOOLS button to select

Edit Favorites. You can set an external input source as a

Favorites.

Information

You can see detailed information about the selected external

device.

Refresh

In Source, If the external devices are not displayed,

press the TOOLS button to select Refresh, then search for

the connected devices.

SOURCE

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 14 2011-02-21 오후 3:52:55

English - 15

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless

connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must ﬁrst

attach a “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, or WIS10ABGN - sold seperately) to either the USB

port on the back of your TV. See the illustration below.

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.

com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung

recommends using IEEE 802.11n. When you play video over a IEEE 802.11b-g connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access

point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.

Your TV is compatible with the following security protocols:

y Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK

y Encryption Type: WEP, TKIP, AES

If you select Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption type is set to WEP, TKIP or TKIP AES

(WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi

certiﬁcation speciﬁcations.

Conﬁguring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Conﬁguration Protocol (DHCP) to conﬁgure network

connections automatically. If your have a Static IP network, see your user’s manual for conﬁguration instructions.

To conﬁgure your network connection for a network that uses DHCP, follow these steps:

1. Connect your TV to your network as shown in the illustration

above.

2. Turn on your TV, press the MENU button on your remote, and

then select Network → Network Settings.

3. Select Wireless (General), press ENTER

, and then press

ENTER

again.

4. The Network function searches for available wireless networks.

When done, it displays a list of the available networks.

5. In the list of networks, press the ▲ or ▼ button to select a

network, select Next, and then press ENTER

6. If you have selected a wireless router that has security, the

Security Key screen appears. Enter the Security key (Security

key or PIN), select Next, and then press ENTER

✎

When you enter the Security Key (Security key or PIN),

use the ▲ / ▼ / ◄ / ► buttons on your remote to select numbers and characters.

7. The Network Connection screen appears and veriﬁes the network connection. When the connection has been veriﬁed, the

“Internet connection successful.” message appears. Network set up is complete.

✎

For more detailed information, see “Wireless Network Connection” in the e-Manual.

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless IP Sharer

(AP having DHCP Server)

TV Rear Panel

Samsung

Wireless LAN Adapter

✎

The displayed imange may differ depending

on the model.

Network Settings

Wired

Cancel

Wireless(General)

WPS(PBC)

One Foot Connection

Select a network connection type.

Set up wireless network

by selecting your Wireless

Router. you may need to enter

security key depending on

the setting of the Wireless

Router.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 15 2011-02-21 오후 3:52:56

English - 16

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are

illustrated below:

✎

A network speed of lower of than 10 Mbps is not supported.

Conﬁguring the Network Connection - Wired

Most home networks use the Dynamic Host Conﬁguration Protocol (DHCP) to conﬁgure network connections. Home networks

that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the

Internet so you don’t have to enter them manually.

To conﬁgure your network connection for a network that uses DHCP,

follow these steps:

1. Connect your TV to your network as shown in one of the

illustrations above.

2. Turn on your TV, press the MENU button on your remote, and

then select Network → Network Settings. The Network

Settings screen will appear.

3. Select Wired, press ENTER

, and then press ENTER

again.

4. The Network Connection screen appears, and veriﬁes the

network connection. When the connection has been veriﬁed,

the “Internet connection successful.” message appears.

Network set up is completed.

✎

If your TV cannot acquire network the connection values automatically or if you want to set the connection manually,

select IP Settings on the network test screen. Set Internet Protocol Setup to Manual. You must enter the IP

Address, Subnet Mask, Gateway, and DNS Server manually.

✎

For more detailed information, see “Wired Network Connection” in the e-Manual.

The LAN Port on the Wall TV Rear Panel

LAN Cable (Not Supplied)

The Modem Port on the Wall

TV Rear Panel

LAN Cable (Not Supplied)Modem Cable (Not Supplied)

Extternal Modem

(ADSL / VDSL / Cable TV)

Network Setting

Wired

Cancel

Wireless(General)

WPS(PBC)

One Foot Connection

Select a network connection type.

Connect to the network using LAN

cable. Please make sure that the

LAN cable is connected.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 16 2011-02-21 오후 3:52:58

English - 17

How to view the e-Manual

Screen Display

Using the Help

Display the e-Manual Guide & the Product Guide by pressing Help.

<e-Manual Guide>

The e-Manual guide appears as above.

The product guide appears as above.

TV Screen: Displays the program,

movie, video, etc. you are currently

watching.

Help: Displays the e-Manual

Guide or Product Guide. Press

ENTER

button.

The category list. Press

button

to select the category you

want.

Displays the sub-menu list. Use

the arrow buttons on your remote

to move the cursor. Press the

ENTER

button to select the sub-

menu you want.

Index: Displays index screen.

X: Exit the e-Manual.

You can ﬁ nd instructions for your TV’s features in the e-Manual in your TV.

To use the e-Manual, press the E-MANUAL button on your remote. Move

the cursor using the up/down/right/left buttons to highlight a category, then

a topic, and then press the ENTER

button. The e-Manual displays the

page you want to see.

You can also access it through the menu:

→ Support → e-Manual → ENTER

✎

If you want to return to the e-Manual, press the E-MANUAL button on your remote.

✎

You cannot use Try Now function if the TV menu is not activated.

E-MANUAL

Return

Sync media from multiple devices with AllShare

AllShare™ syncs your digital devices so you can

enjoy music, movies and photos from your PC,

camera and mobile devices, on your larger TV

screen. Connects you to multiple PCs, as well.

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

IndexHelp

Return

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

IndexHelp

 How to view the e-Manual

You can ﬁ nd instructions for your TV’s features

in the e-Manual in your TV. To use the e-Manual,

press the E-MANUAL button on your remote. Move

the cursor using the u/down/right/left buttons to

highlight a category, then a topic, and then press the

ENTER

button. The e-Manual displays the page

you want to see.

You can also access it through the menu:

O MENU

→ Support → e-Manual → ENTER

✎ If you want to return to the e-Manual, press the E-MANUAL button on your remote.

✎ You can not use Try now function if the TV menu is not activated.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 17 2011-02-21 오후 3:53:06

English - 18

How to toggle between the e-Manual and the corresponding OSD menu(s).

✎

This function is not enabled in some menus.

Method 1 Method 2

1. Select Try Now, if you want to execute the

corresponding menu(s).

2. To return to the e-Manual screen, press the E-MANUAL

button.

1. Press the ENTER

button when a topic is displayed.

“Do you want to execute this?” appears. Select Yes,

and then press the ENTER

button. The OSD window

appears.

2. To return to the e-Manual screen, press the E-MANUAL

button.

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (1/1)

Help Try Now Home Zoom Index

 Changing the Preset Picture Mode

O MENU

→ Picture → Picture Mode → ENTER

■

Picture Mode t

Picture modes apply preset adjustments to the picture. Select a mode using

the up and down arrow keys, and then press the ENTERE button.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain (In PC mode only): Suitable for watching movies

and games.

Try Now: Displays the OSD menu that corresponds to the topic. To return

to the e-Manual screen, press the E-MANUAL button

Home: Moves to the e-Manual home screen.

Zoom: Magniﬁes a screen.

Index: Displays index screen.

Contents Area: Contains the topic contents

if you selected a sub-menu. To move to the

previous or next page, press the

button.

Help Try Now Home Zoom Index

Basic Features > Changing the Preset Picture Mode (1/1)

 Changing the Preset Picture Mode

■

Picture Mode t

Picture modes apply preset adjustments to the picture. Select a mode using the up

and down arrow keys, and then press the ENTER

button.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain (In PC mode only): Suitable for watching movies and games.

Picture

Picture Mode Standard

Tint (G/R) G 50 R 50

Color 50

Sharpness 50

Brightness 45

Contrast 100

Backlight 14

E-MANUAL

Try Now

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 18 2011-02-21 오후 3:53:08

English - 19

Using the Zoom mode

When you are viewing an e-Manual instruction page, press

ENTER

to magnify the screen. You can scroll through the

magniﬁed screen by using the

buttons.

✎

To return to the screen to normal size, press the

RETURN button.

How to search for a topic on the index page

1. To search for a topic, press the left or right arrow button to select a letter, and then press ENTER

. The Index displays a

list of topics and keywords that begin with the letter you selected.

2. Press the up or down arrow button to select a topic or keyword you want, and then press the ENTER

button to select

a topic you want to see.

3. The e-Manual page with the topic appears.

✎

To close the Index screen, press the RETURN button.

Return

 Changing the Preset Picture Mode

O MENU

→ Picture → Picture Mode → ENTER

■

Picture Mode t

Picture modes apply preset adjustments to the picture. Select a mode using the up and

down arrow keys, and then press the ENTER

button.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain (In PC mode only): Suitable for watching movies and games.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 19 2011-02-21 오후 3:53:09

English - 20

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solutions. Also review the Troubleshooting

section in the e-Manual. If none of the troubleshooting tips apply, visit “www.samsung.com,” and then click on Support, or call

Samsung customer service at 1-800-SAMSUNG.

Issues Solutions and Explanations

The TV won’t turn on. y Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

y Make sure the wall outlet is working.

y Try pressing the POWER button on the TV to make sure the problem is not the

remote. If the TV turns on, refer to “Remote control does not work” below.

There is no picture/video. y Check the cable connections. Remove and reconnect all cables connected to the

TV and external devices.

y Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc)

to match the TV input connections. For example, if an external device’s output is

HDMI, it should be connected to an HDMI input on the TV.

y Make sure your connected devices are powered on.

y Be sure to select the correct input source by pressing the SOURCE button on the

remote control.

y Reboot the connected device by unplugging and then reconnecting the device’s

power cable.

The remote control does not work. y Replace the remote control batteries. Make sure the batteries are installed with their

poles (+/–) in the correct direction.

y Clean the sensor’s transmission window on the remote.

y Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote

control doesn’t turn the TV on or

off, or adjust the volume.

y Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set

user manual for the SAMSUNG TV code.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

To keep your TV in optimum condition, upgrade to the latest ﬁrmware on the Samsung web site by USB (samsung.com →

Support → Downloads).

License

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, your TV lets you watch non-subscription HD

broadcasts without a cable box or STB (Set-Top-Box) satellite receiver.

y SMART HUB: Your Gateway to all your content, integrated in one place:

– Provides diverse entertainment choices.

– Lets you control your entertainment life with an easy-to-use, user friendly UI.

– Gives you easy access to diverse Apps, with more being added every day.

– Lets you customize your TV by grouping and sorting Apps to your taste.

y AllShare™: AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

y Anynet+(HDMI-CEC): Allows you to control all connected Samsung devices that support anynet+ with your Samsung

TV’s remote.

[UD6000(6050)-ZC]BN68-03330B-01L02.indb 20 2011-02-21 오후 3:53:09

La page charge ...

Samsung UN40D6000SF Guide de démarrage rapide

Marque: Samsung

Modèle: UN40D6000SF

Catégorie: Téléviseurs LED

Taper: Guide de démarrage rapide

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung UN40D6000SF Quick start guide

Samsung UN40D6000SF Guide de démarrage rapide

Ce manuel convient également à

Samsung UN40D6000SF Guide de démarrage rapide

dans d''autres langues

Documents connexes