LG 55US761H0GA Le manuel du propriétaire

Marque: LG

Modèle: 55US761H0GA

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

OWNER’S MANUAL

Safety and Reference

LED TV*

www.lg.com

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it

for future reference.

*MFL71709905*

(2101-REV02)

ENGLISH_Index

Warning! Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS

WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• Do not place the TV and/or remote control in the following

environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom.

- Near any heat source such as stoves and other devices that produce

heat.

- Near kitchen counters or humidifiers where they can easily be

exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place objects

filled with liquids, such as vases, cups, etc. on or over the apparatus

(e.g., on shelves above the unit).

- Near flammable objects such as gasoline or candles, or expose the

TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/

explosion, malfunction or product deformation.

• Ventilation

- Install your TV where there is proper ventilation. Do not install in a

confined space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other materials

while unit is plugged in.

• Take care not to touch the ventilation openings. When watching the

TV for a long period, the ventilation openings may become hot.

• Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and the point where the

cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not

pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power outlet as this

could result in fire or electric shock.

• Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In case of an

emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling onto the TV. Otherwise, the TV

may fall over, which may cause serious injury.

• Outdoor Antenna Grounding (Can differ by country):

- If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or

where it can come in contact with such power lines or circuits as

death or serious injury can occur.

ENGLISH_Index

• Grounding (Except for devices which are not grounded.)

- TV with a three-prong grounded AC plug must be connected to a

three-prong grounded AC outlet. Ensure that you connect the earth

ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna during a lightning storm. You

may be electrocuted.

• Make sure the power cord is connected securely to the TV and wall

socket if not secured damage to the Plug and socket may occur and in

extreme cases a fire may break out.

• Do not insert metallic or inflammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord

and contact the customer service.

• Do not touch the end of the power cord while it is plugged in. You

may be electrocuted.

• If any of the following occur, unplug the product immediately

and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC

adapter, power cord, or TV).

- If you smell smoke or other odors coming from the TV.

- When lightning storms or when unused for long periods of time.

Even if the TV is turned off by the remote control or power button, AC

power source is still connected to the unit if it is not unplugged.

• Do not use high voltage electrical equipment near the TV (e.g., a bug

zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written

authorisation from LG Electronics. Accidental fire or electric shock

can occur. Contact your local customer service for service or repair.

Unauthorised modification could void the user’s authority to operate

this product.

• Use only an authorised attachments / accessories approved by

LG Electronics. Otherwise, this may result in fire, electric shock,

malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may result in

fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An

impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not touch the TV with

wet hands. If the power cord prongs are wet or covered with dust, dry

the power plug completely or wipe dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of the

reach of children.

- Do not short circuit, disassemble, or allow the batteries to

overheat. Do not dispose of batteries in a fire. Batteries should not

be exposed to excessive heat.

- Caution : Risk of fire or explosion if the battery is replaced by an

incorrect type.

• Moving

- When moving, make sure the product is turned off, unplugged, and

all cables have been removed. It may take 2 or more people to carry

larger TVs. Do not press or put stress on the front panel of the TV.

Otherwise, this may result in product damage, fire hazard or injury.

• Keep the packing anti-moisture material or vinyl packing out of the

reach of children.

• Do not allow an impact shock, any objects to fall into the product,

and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp

object such as a nail, pencil, or pen, or make a scratch on it. It may

causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently with a

soft/dry cloth. Do not spray water or other liquids directly on the

TV. Do not clean your TV with chemicals including glass cleaner, any

type of air freshener, insecticide, lubricants, wax (car, industrial),

abrasive, thinner, benzene, alcohol etc., which can damage the

product and/or its panel. Otherwise, this may result in electric

shock or product damage.

ENGLISH_Index

Preparing

• If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown

in this manual.

• The available menus and options may differ from the input source or

product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the

access. Some devices are not made by turning on / off button, turning

off the device and unplugging the power cord.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should have

bezels less than 10 mm thick and 18 mm width. Use an extension

cable that supports USB if the USB cable or USB memory stick

does not fit into your TV’s USB port.

* A

10 mm

* B

18 mm

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display or

a connection error may occur.

• Recommended HDMI Cable Types

- Ultra High Speed HDMI

/™ Cable (3 m or less)

Separate Purchase

Separate purchase items can be changed or modified for quality

improvement without any notification. Contact your dealer to buy these

items. These devices only work with certain models.

The model name or design may be changed depending on the upgrade

of product functions, manufacturer’s circumstances or policies.

LED Clock

(Depending on model)

LEC-005

Magic Remote Control

(Depending on model)

AN-MR18HA

Check whether your TV model supports Bluetooth in the Wireless

Module Specification to verify whether it can be used with the Magic

Remote.

ENGLISH_Index

Wall Mounting Bracket

Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in

the following table.

Model

43/50US66*

49US76*

55US66*

55US76*

VESA (A x B) (mm) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount bracket

LSW240B

MSW240

OLW480B

MSW240

Model

65US66*

65US76*

VESA (A x B) (mm) 300 x 300

Standard screw M6

Number of screws 4

Wall mount bracket OLW480B

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched

or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that

the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all

cables.

• When holding the TV, the screen should face away from you to avoid

damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive

vibration.

• When transporting the TV, keep the TV upright, never turn the TV on

its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage the screen.

• When handling the TV, be careful not to damage the protruding

buttons.

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• Do not move the TV by holding the cable holders, as the

cable holders may break, and injuries and damage to the

TV may occur.

• When attaching the stand to the TV set, place the screen

facing down on a cushioned table or flat surface to protect

the screen from scratches. (Depending on model)

ENGLISH_Index

Mounting on a Table

(Depending on model)

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper

ventilation.

10 cm

(Depending on model)

2 Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to the

screw parts when assembling the product. (Doing so may

damage the product.)

• If you install the TV on a stand, you need to take actions

to prevent the product from overturning. Otherwise, the

product may fall over, which may cause injury.

• Do not use any unapproved items to ensure the safety and

product life span.

• Any damage or injuries caused by using unapproved items

are not covered by the manufacturer’s warranty.

• Make sure that the screws are inserted correctly and fastened

securely. (If they are not fastened securely enough, the TV

may tilt forward after being installed.) Do not use too much

force and over tighten the screws; otherwise screw may be

damaged and not tighten correctly.

• If a television is not positioned in a sufficiently stable

location, it can be potentially hazardous due to falling. Many

injuries, particularly to children, can be avoided by taking

simple precautions such as:

- Using cabinets or stands recommended by the

manufacturer of the television.

- Only using furniture that can safely support the television.

- Ensuring the television is not overhanging the edge of the

supporting furniture.

- Not placing the television on tall furniture (for example,

cupboards or bookcases) without anchoring both the

furniture and the television to a suitable support.

- Not standing the televisions on cloth or other materials

placed between the television and supporting furniture.

- Educating children about the dangers of climbing on

furniture to reach the television or its controls.

ENGLISH_Index

Attaching the TV to a Desk

(Depending on model)

The TV should be attached to a desk so it cannot be pulled in a forward/

backward direction, potentially causing injury or damaging the product.

A type

4-Screws

(Not supplied with TV)

Desk

Stand

• Screw: M5 x L (*L: Table depth + 8~10mm)

ex) Table depth: 15mm, Screw: M5 x L25

B type

2-Screws for Stand Fixing,

2-Washers for Stand Fixing,

2-Nuts for Stand Fixing

(Supplied with TV)

Desk

Stand

Using the Kensington security

system

(Depending on model)

The Kensington security system connector is located at the rear of the

TV. For more information of installation and using, refer to the manual

provided with the Kensington security system or visit http://www.

kensington.com. Connect the Kensington security system cable between

the TV and a table.

(Depending on model)

Securing the TV to a Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

• If there are bolts inserted at the eye-bolts position, remove the

bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the

location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to support

the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain additional

accessories from your local dealer.

ENGLISH_Index

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to

the floor. When you attach the TV to other building materials, please

contact qualified personnel. LG recommends that wall mounting be

performed by a qualified professional installer. We recommend the use

of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with

cables connected. When you do not use LG’s wall mount bracket, please

use a wall mount bracket where the device is adequately secured to the

wall with enough space to allow connectivity to external devices. It is

advised to connect all the cables before installing fixed wall mounts.

10 cm

• Remove the stand before installing the TV on a wall mount

by performing the stand attachment in reverse. (Depending

on model)

• For more information of screws and wall mount bracket,

refer to the Separate purchase.

• If you intend to mount the product to a wall, attach VESA

standard mounting interface (optional parts) to the back

of the product. When you install the set to use the wall

mounting bracket (optional parts), fix it carefully so as not

to drop.

• When mounting a TV on the wall, make sure not to install

the TV by hanging the power and signal cables on the back

of the TV.

• Do not install this product on a wall if it could be exposed

to oil or oil mist. This may damage the product and cause

it to fall.

(Depending on model)

• Do not use a sharp object when you detached the cable

cover. This could damage the cable or the cabinet. It may also

cause personal harm. (Depending on model)

ENGLISH_Index

• When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the influx of dust

and insects. (Depending on model)

Stand hole

Connections

Connect various external devices to the TV and switch input modes to

select an external device. For more information of external device’s

connection, refer to the manual provided with each device.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to

improve the image quality.

• If the image quality is poor with an antenna connected, try to realign

the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• For a location that is not supported with ULTRA HD broadcasting,

this TV cannot receive ULTRA HD broadcasts directly. (Depending on

model)

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF

cable (75Ω). (Depending on model)

CI module

View the encrypted (pay) services in digital TV mode. (Depending on

model)

• Check if the CI module is inserted into the PCMCIA card slot in the

right direction. If the module is not inserted properly, this can cause

damage to the TV and the PCMCIA card slot.

• If the TV does not display any video and audio when CI+ CAM is

connected, please contact to the Terrestrial/Cable/Satellite Service

Operator.

ENGLISH_Index

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

HDMI

• Supported HDMI Audio format:

(Depending on model)

Dolby Digital / Dolby Digital Plus (32kHz / 44.1kHz / 48kHz),

PCM (32kHz / 44.1kHz / 48kHz / 96kHz / 192kHz)

(Only UHD models)

• [Picture] [Additional Settings] [HDMI

Ultra HD Deep Colour]

- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep

Colour, your picture may be clearer. However, if the device doesn’t

support it, it may not work properly. In that case, change the TV’s

[HDMI Ultra HD Deep Colour] setting to Off.

USB

Some USB Hubs may not work. If a USB device connected through a USB

Hub is not detected, connect it directly to the USB port on the TV.

• Use USB 1 port when connecting a webcam. USB 2 port may not

support some webcam. (Depending on model)

• It is recommended that you use a USB hub or USB HDD with a power

supply. (If the power supplied is not sufficient, the USB storage device

may not be detected properly.)

• It is recommended that you use an external USB HDD with a rated

voltage of 5V of less and a rated current of 500mA or less.

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players,

VCRs, audio systems, USB storage devices, PC, gaming devices, and

other external devices.

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the TV

port.

• Refer to the external equipment’s manual for operating instructions.

• If you connect a gaming device to the TV, use the cable supplied with

the gaming device.

• In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change the

PC output to another resolution, change the refresh rate to another

rate or adjust the brightness and contrast on the PICTURE menu until

the picture is clear.

• In PC mode, some resolution settings may not work properly

depending on the graphics card.

• If ULTRA HD content is played on your PC, video or audio may become

disrupted intermittently depending on your PC’s performance.

(Depending on model)

• When connecting via a wired LAN, it is recommended to use a CAT 7

cable. (Only when port is provided.)

ENGLISH_Index

External Speakers

(Depending on model)

VOLUME

CONTROL

STEREO

(8 )

EXTERNAL

SPEAKER OUT

DOWN

Control port for Speaker out

RIGHT

LEFT

: Depending on model

• Use only with the 3 Pole 3.5mm Stereo Jack.

• Do not connect your headphones or earphones to the port

for connecting an external speaker.

Method of volume control port

(Depending on model)

• Cable Spec.

/ UP / DOWN

Each up/down pins

are connected to CPU

with pull up resistor

respectively.

CPU detects

transition from 3.3V

to level for

volume control.

ENGLISH_Index

Network

(Depending on model)

Wired network connection

This TV can be connected to a Pro:Centric server via the port. After

making the physical connection, the TV needs to be set up for network

communication.

Connect the port of the Modem or Router from Pro:Centric server to

the port on the TV.

2 1

Broadband Modem

Pro:Centric Server

Broadband Modem

Pro:Centric Server

Router

Broadband Modem

Connect the port of the Modem or Router to the port on

the TV.

Connect the port of the PC to the port on the TV.

(Depending on model)

• Do not connect a modular phone cable to the port.

• Since there are various connection methods, please follow

the specifications of your telecommunication carrier or

internet service provider.

Using Button

(Depending on model)

You can simply operate the TV functions, using the button.

ENGLISH_Index

Basic functions

Power On (Press)

Power Off

(Press and Hold)

Menu Control (Press

)

Menu Selection (Press and Hold

)

1 All running apps will close.

2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

(Depending on model)

When the TV is turned on, press the button one time. You can adjust

the Menu items using the button.

Turns the power off.

Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

Adjusting the Angle of the

TV to suit view

(Depending on model)

Swivel 20 degrees to the left or right and adjust the angle of the TV to

suit your view.

20˚

• When adjusting the angle of the product, watch out for your

fingers.

- Personal injury may occur if hands or fingers are pinched.

If the product is tilted too much, it may fall, causing

damage or injury.

ENGLISH_Index

Using Remote Control

The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries

(1.5VAAA) matching the and ends to the label inside the

compartment, and close the battery cover.

Make sure to point the remote control toward the remote control sensor

on the TV.

(Some buttons and services may not be provided depending on models

or regions.)

* To use the button, press and hold for more than 3 seconds.

(POWER) Turns the TV on or off.

Adjusts the brightness of the screen to reduce

energy consumption.

This function is not supported.

Changes the input source.

Selects Radio, TV and DTV programme.

Number buttons Enters numbers.

Alphabet buttons Enters letters.

Accesses the saved programme list.

(SPACE) Opens an empty space on the screen keyboard.

Returns to the previously viewed programme.

Adjusts the volume level.

Accesses the Home menu.

* Shows the previous history.

Shows the previous history.

Mutes all sounds.

* Accesses the [Accessibility] menu.

Scrolls through the saved programmes.

Moves to the previous or next screen.

Shows programme guide.

Displays and removes hotel interactive menu.

Views the information of the current programme and screen.

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

Selects menus or options and confirms your input.

Accesses the main menus.

(BACK) Returns to the previous level.

Clears on-screen displays and return to TV viewing.

These access special functions in some menus.

Teletext buttons ( ) These buttons are used for

teletext.

Recalls your preferred subtitle in digital mode.

Control buttons ( ) Controls media contents.

This function is not supported.

Selects the MHP TV menu source.

Audio descriptions function will be enabled.

Sets the alarm function.

ENGLISH_Index

• Do not mix new batteries with old batteries. This may cause

the batteries to overheat and leak.

• Failure to match the correct polarities of the battery may

cause the battery to burst or leak, resulting in fire, personal

injury, or ambient pollution.

• This apparatus uses batteries. In your community there

might be regulations that require you to dispose of these

batteries properly due to environmental considerations.

Please contact your local authorities for disposal or recycling

information.

• The product's internal and external batteries should not be

exposed to excessive heat such as direct sunlight, fire, or

the like.

• In Analogue TV and some countries, some remote control

buttons may not work.

Troubleshooting

The software version can be updated for improvement in performance.

Customer needs to ensure the compatibility of customer’s equipment

with LGE software. If needed, please consult with LGE and upload

revised software version according to the guidance provided by LGE.

Cannot control the TV with the remote control.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote

control.

• Check if the batteries are still working and properly installed ( to

, to ).

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other

products.

The TV turns off suddenly.

• Check the power control settings. The power supply may be

interrupted.

• Check if the auto-off function is activated on the settings related

time.

• If there is no signal while the TV is on, the TV will turn off

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

• Turn the TV off/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

ENGLISH_Index

Abnormal display

• If the product feels cold to the touch, there may be a small “flicker”

when it is turned on. This is normal, there is nothing wrong with

product.

• This panel is an advanced product that contains millions of pixels.

You may see tiny black dots and/or brightly coloured dots (red, blue

or green) at a size of 1ppm on the panel. This does not indicate a

malfunction and does not affect the performance and reliability of

the product. This phenomenon also occurs in third-party products

and is not subject to exchange or refund.

• You may find different brightness and colour of the panel depending

on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is

not related with the product performance, and it is not malfunction.

• Displaying a still image for a prolonged period of time may cause

image sticking. Avoid displaying a fixed image on the TV screen for a

long period of time.

Generated sound

• “Cracking” noise: A cracking noise that occurs when watching or

turning off the TV is generated by plastic thermal contraction due to

temperature and humidity. This noise is common for products where

thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a large

amount of current to operate a product. It varies depending on the

product. This generated sound does not affect the performance and

reliability of the product.

• When cleaning the product, be careful not to allow any

liquid or foreign objects to enter the gap between the

upper, left or right side of the panel and the guide panel.

(Depending on model)

• Make sure to wring any excess water or cleaner from the

cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a

dry cloth to wipe the screen.

ENGLISH_Index

Specifications

(Depending on country)

Broadcasting Specifications

Digital TV Analogue TV

Television system

DVB-T/T2

DVB-S/S2

DVB-C

PAL B/B, B/G, D/K, I

SECAM B/G, D/K

NTSC-M

Channel coverage

(Band)

DVB-S/S2

DVB-C DVB-T/T2

46 ~ 862 MHz

950~2,150 MHz 46 ~ 890 MHz

VHF III: 174 ~ 230 MHz

UHF IV: 470 ~ 606 MHz

UHF V: 606 ~ 862 MHz

S Band II: 230 ~ 300 MHz

S Band III: 300 ~ 470 MHz

Maximum number of

storable programmes

6,000 3,000

External antenna

impedance

75 Ω

CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

1 Only DVB-T2 support models. (Despite DVB-T2 Model, DVB-T/T2 does not apply in Philippine.)

2 Only DVB-T2/C/S2 support models.

3 Only NTSC-M support models.

ENGLISH_Index

Wireless module (LGSBWAC92) specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range Output Power (Max.)

2,400 to 2,483.5MHz

5,150 to 5,725MHz

5,725 to 5,850MH

18dBm

12dBm

Bluetooth

Frequency Range Output Power (Max.)

2,400 to 2,483.5MHz 8dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

“IEEE 802.11ac” is not available in all countries.

(Only Nigeria)

Connection and use of this communications

equipment is permitted by the Nigerian

Communications Commission

Environment condition

Operating Temperature 0°C to 40°C

Operating Humidity Less than 80%

Storage Temperature -20°C to 60°C

Storage Humidity Less than 85%

• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)

- The Energy consumption is measured in accordance with IEC 62087.

• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.

ENGLISH_Index

HDMI-DTV supported mode

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 480p

31.46

31.5

59.94

720 x 480p

31.46

31.5

59.94

720 x 576p 31.25 50

1280 x 720p

44.95

37.5

59.94

1920 x 1080i

28.12

33.71

33.75

59.94

1920 x 1080p

26.97

33.71

33.75

56.25

67.43

67.5

23.97

29.97

59.94

1920 x 1080p

112.5

134.86

135

100

119.88

120

3840 x 2160p

53.94

56.25

67.43

67.5

112.5

134.86

135

23.97

29.97

59.94

4096 x 2160p

53.94

56.25

67.43

67.5

112.5

134.86

135

23.97

29.97

59.94

HDMI-PC supported Mode

• PC audio is not supported.

• Use HDMI IN 1 for PC mode. (Depending on model)

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 350 31.46 70.09

720 x 400 31.46 70.08

640 x 480 31.46 59.94

800 x 600 37.87 60.31

1024 x 768 48.36 60

1360 x 768 47.71 60.01

1152 x 864 54.34 60.05

1280 x 1024 63.98 60.02

1920 x 1080

67.5

134.86

135

119.88

120

2560 x 1440 88.78 59.95

3840 x 2160

53.94

56.25

67.43

67.5

112.5

134.86

135

23.97

29.97

59.94

4096 x 2160

53.94

56.25

67.43

67.5

112.5

134.86

135

23.97

29.97

59.94

ENGLISH_Index

Supported Photo Formats

File

Format

Format Resolution

.jpeg, .jpg,

.jpe

JPEG

Minimum: 64(W) x 64(H)

Maximum (Normal Type): 15360(W) x

8640(H)

Maximum (Progressive Type): 1920(W)

x 1440(H)

.png PNG

Minimum: 64(W) x 64(H)

Maximum: 5760(W) x 5760(H)

.bmp BMP

Minimum: 64(W) x 64(H)

Maximum: 1920(W) x 1080(H)

Supported Audio Formats

File

Format

Item Info

.mp3

Bit rate 32Kbps - 320Kbps

Sample freq. 16kHz - 48kHz

Support MPEG1, MPEG2

Channels mono, stereo

.wav

Bit rate -

Sample freq. 8kHz - 96kHz

Support PCM

Channels mono, stereo

.ogg

Bit rate 64kbps - 320kbps

Sample freq. 8kHz - 48kHz

Support Vorbis

Channels mono, stereo

.wma

Bit rate 128kbps - 320kbps

Sample freq. 8kHz - 48kHz

Support WMA

Channels up to 6 ch

.flac

Bit rate -

Sample freq. 8kHz - 96kHz

Support FLAC

Channels mono, stereo

• The number of supported programmes may vary depending on the

sample frequency.

La page charge ...

LG 55US761H0GA Le manuel du propriétaire

Marque: LG

Modèle: 55US761H0GA

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG 55US761H0GA Owner's manual

LG 55US761H0GA Le manuel du propriétaire

LG 55US761H0GA Le manuel du propriétaire

dans d''autres langues

Documents connexes