Zoom DIS570/01 Manuel utilisateur

WhiteSpeed

Light-Accelerated

Tooth Whitening

Procedure Kit

WhiteSpeed

Light-Accelerated

Tooth Whitening

Procedure Kit

Instructions for use

English 6

Deutsch 19

Français 37

Hrvatski 59

Italiano 75

Română 89

Suomi 104

Български 120

Manufacturing information

Manufacturer:

Discus Dental, LLC

1700A South Baker Avenue

Ontario, CA 91761 USA

philipsoralhealthcare.com

EMERGO EUROPE

Prinsessegracht 20

2514 AP The Hague

The Netherlands

VITA is a registered trademark of the VITA

ZAHNFABRIK, H. Rauter GmbH & KG,

Bad Saeckingen, Germany.

Symbols

Consult instructions for use

Reference to enclosed or attached information

Caution

Keep away from sunlight, keep away from heat

Temperature limits

Conformity European

4 English

Manufacturer

Use by date

Batch code

Catalogue number

Authorized in the European Community

Do not re-use. This product is intended for use

on a single patient during a single procedure.

Keep refrigerated

Important information

Read and understand the information in these

instructions for use and in the instructions

for use provided with the Philips Zoom!

Whitespeed Light-Accelerated Tooth Whitening

Gel (whitening gel) prior to initiating whitening

treatment.

The whitening gel must be removed from

refrigeration and warmed to room temperature

so it will thicken before it is applied to the

patient's teeth. Either:

- Remove the syringe from refrigeration at

least 6 hours before use (preferably the night

before) or

- If removed just prior to use, place the syringe

in a cup of hot water (49 °C) for 10 minutes.

Remove the syringe from the water and wait

5 minutes before extruding gel.

2

REFRIGERATE

5English

Conditions of use

This product is to be distributed to and used by

dental professionals exclusively. This product is

intended for use on healthy patients aged

18 years and older who have no underlying oral

health issues, are not perio-involved and do not

exhibit failing restorations.

Contents

Philips Zoom! WhiteSpeed Light-Accelerated

Whitening Procedure Kits (Light-Accelerated

procedure kits) include:

- Sheets .040 EVA tray material (2), (not included

in all Light-Accelerated procedure kits)

- Light guide (2)

- IsoPrep retractor (2)

Procedure tray (2) includes:

- Face bib (2)

- Gauze squares (6)

- Liquidam Soft Tissue Isolation Syringe, 2.9 g (1)

- Liquidam needle point tip (1)

- Liquidam black tip (1)

- Cotton rolls (2)

- Surgical suction tip (1)

- Application brush (1)

Post care and maintenance kits (not included

in all Light-Accelerated procedure kits)

include:

- NiteWhite/DayWhite Whitening Gel

instructions for use (1)

- Relief ACP oral care gel instructions for use (1)

- Relief ACP oral care gel syringe, 2.4 ml (1)

- Whitening gel (1)

- Tray case (1)

6 English

Packaged separately:

- Philips Zoom! WhiteSpeed Light-Accelerated

Tooth Whitening Gel

- Instructions for use (1)

- 25 % Hydrogen Peroxide Whitening Gel

syringe, 4.6 g (1)

- Mixing tip (1)

Product description

Philips Zoom! WhiteSpeed Light-Accelerated

Tooth Whitening Procedure Kits are professional

level (in-oce) Light-Accelertated procedure

kits and are for single patient use only.

Indications for use - candidate

qualication

A screening exam is recommended to ensure

the patient has no underlying oral health issues.

You may want to treat existing issues before

recommending this whitening treatment and

disqualify any patient who is perio-involved,

exhibits failing restorations or is otherwise in an

unhealthy oral state.

Patient's expectations

Set realistic expectations about potential

results based on the oral exam and explain the

following:

- Results vary by patient.

- Most patients will experience a change of

up to 6-8 shades on value-ordered VITA®

Classical Shade Guide.

- Anatomy, calcications, age, tooth condition,

hygiene and starting shade aect the results.

- Teeth with yellow and brown stains will

achieve the most noticeable results.

- Teeth with gray shading from tetracycline

or other medications may experience less

noticeable results but should improve.

7English

- Teeth with multiple colorations, bands,

splotches or spots due to tetracycline use

or uorosis do not whiten as well, may

whiten unevenly, and may require additional

whitening treatments.

- Previous orthodontic treatments may

cause teeth to whiten unevenly either due

to residual resin remaining on the teeth or

overpolishing upon removal.

- Crowns and other tooth-colored restorations

will not whiten.

- Tooth-colored restorations may require

replacement following whitening to maintain

a uniform color.

Pre-treatment for reducing tooth

sensitivity

It is recommended to prescribe the following

prior to the treatment:

- Treat with a desensitizing toothpaste with

5 % KNO

3

twice a day for 14 days before the

procedure

- NSAID adhering to the respective drug’s

instructions for use 1 hour before the

procedure

Warnings

- Do not place a composite/bonded

restoration within seven days after whitening

treatment to ensure color stability of the

composite/bonded restoration and bond

strength to enamel and dentin.

- Do not use tooth whitening gel on

anesthetized teeth.

- Tooth whitening is not recommended when

there are previous injuries in the gingival

tissues.

- Avoid contact of whitening gel with eyes and

soft tissue. If contact with eyes occurs, rinse

eyes immediately with plenty of water and

seek medical advice.

8 English

Intended use

Philips Zoom! Light-Accelerated WhiteSpeed

Kits are for use with Zoom! WhiteSpeed Light-

Accelerated Tooth Whitening Gel. The Light-

Accelerated procedure kit contents are intended

to be used as follows.

Kit contents Intended use

Lip retractor Moves the lips and cheeks away from

the teeth, protecting the lips, cheeks and

tongue from coming into contact with

the whitening gel.

Face bib Help protect the patient's face from the

light source.

Liquidam (gingival

barrier material)

Used as an isolation material to prevent

the whitening gel from contacting

gingival tissues.

Cotton rolls Separate the upper and lower vestibule

during the procedure and help isolate

the patient's lips from the teeth.

Gauze squares Help isolate the patient's lip from the

teeth and provide additional separation

between the upper and lower vestibule.

Saliva suction tip Remove excess liquid/saliva that may

accumulate during the procedure.

Whitening gel

applicator brush

Apply whitening gel to the patient's

teeth.

Light guide An accessory to the LED Accelerator

used to help align the head to a

specied distance between the LED

Accelerator and the patient.

Relief ACP oral care gel Relieve discomfort from dentin sensitivity.

9English

Contraindications

Philips Zoom! WhiteSpeed Light-Accelerated

Tooth Whitening Gel is not for use on or by:

- Pregnant or lactating women.

- Patients currently being treated for a

serious illness or disorder, e.g. immune

compromised, AIDS, etc.

- Patients under 18 years of age.

Possible side eects

- Teeth sensitivity or hypersensitivity.

- Gingival irritation or burn if Liquidam soft

tissue isolation is not placed in accordance

with the instructions in the Light-Accelerated

procedure kit.

Frequency of use

Philips Zoom! WhiteSpeed Light-Accelerated

Tooth Whitening Gel is intended for a single

patient treatment. A single treatment typically

consists of three to four 15-minute applications.

A patient may be treated more than once at the

discretion of the dental professional, allowing

seven days between treatments.

Safety

- Dental professional and patient need

suitable protective covering and Zoom!

protective eyewear.

- Avoid whitening gel contact with soft tissue

and eyes.

First aid instructions

- Contact a Poison Information Center or

medical doctor immediately if a large

quantity (over 25 % of the syringe) is

swallowed. Provide the ingredient label

if possible. Do not induce vomiting.

Immediately give a glass of water.

10 English

- If whitening gel gets into the eyes, hold the

eyelids apart and ush the eyes continuously

with running water for at least 15 minutes.

- If improper isolation leaves a patient’s

soft tissue exposed to light, administer

a nonsteroidal anti-inammatory drug

(NSAIDs) adhering to the respective drug's

instructions for use.

Precautions

The whitening gel must be removed from

refrigeration and warmed to room temperature

so it will thicken before it is applied to the

patient's teeth. Either:

- Remove the syringe from refrigeration at

least 6 hours before use (preferably the night

before) or

- If removed just prior to use, place the syringe

in a cup of hot water (49 °C) for 10 minutes.

Remove the syringe from the water and wait

5 minutes before extruding gel.

Note: Improper soft tissue isolation may result

in irritation or burning of gingiva or swollen lips

due to WhiteSpeed Accelerator light coming

into contact with tissue. Improper soft tissue

isolation may also results in chemical burn due

to whitening gel coming into contact with tissue.

Note: Wait one week after whitening to place

restorations. Patients with porcelain fused

to metal crowns, amalgams, lingual bars or

implants will feel excessive heat.

In-oce whitening treatment

Before the in-oce whitening treatment

Complete diagnosis of patient, treat for

sensitivity (see 'Pre-treatment for reducing

tooth sensitivity') and fabricate trays prior to

whitening treatment (see EVA tray material

instructions for use if provided).

11English

In-oce whitening treatment

1 Pumice teeth just prior to whitening.

2 Remove the light guide from the packaging

and place it on the LED Accelerator.

3 Switch on the LED Accelerator using

the power button located on the side of

the power pack. When the light guide

is attached, the display reads 'Guide

Status–Guide Attached' followed by 'X of X

Sessions'.

4 Place the surgical suction tip on the high

vacuum suction.

5 Place the Zoom! protective eyewear on the

patient.

Note: The retractor provided is necessary

to ensure proper positioning of the LED

Accelerator head and additional protection

from light.

6 Insert the retractor at an angle, retracting

one side at a time using a dental mirror to

assist in placement.

Note: The retractor has been specically

engineered to work with the Philips Zoom!

WhiteSpeed Light-Accelerated Whitening

System. Do not substitute.

7 Take a retracted 'before' photo using a

matched shade tab.

8 Fully recline the patient.

9 Place cotton rolls in the center of the upper

and lower vestibules. If the cotton rolls are

too large, unfold the gauze and twist it like a

cotton roll.

Note: Do not substitute gauze. The gauze

provided has been tested and proven to

provide superior protection.

12 English

10 Fully open the gauze squares and fold them

into triangles. Place the apex of the triangle

into the posterior cheek, tuck the balance

of material into the cheek, tucking the ends

between the cotton rolls and the retractor.

11 Carefully place one face bib around

the retractor, one side at a time. Add an

additional bib for heavy salivators.

12 Remove the Liquidam syringe from the

packaging, twist to remove the cap and

attach the metal tip.

Note: Exposed dentin and tissue should be

covered by barrier material. Use the 'no pink'

rule.

13 Dry soft tissue (failure to do so may create

imperfect seal and allow whitening gel

to migrate onto soft tissue) and begin by

scalloping barrier material to CEJ area

(gingival margins) on the upper teeth slightly

overlapping enamel and interproximal

spaces to form enamel seal.

13English

14 Cure the application of Liquidam using a

curing light.

Note: Liquidam can become warm upon

curing. Move the light back and forth across

the arch using a sweeping motion for about

10 seconds.

15 Change to the plastic tip. Fill in from the

cotton roll to just formed line of Liquidam

and cure. Be sure to cover all interproximal

areas leaving no soft tissue exposed.

On the lower arch, apply Liquidam using the

same method.

Use the tip of the syringe to press lightly on

the application to ensure that it is completely

cured. The material should be solid and have

no give.

If necessary, cure the arch again for an

additional 5 seconds.

The application should extend distal at least

one tooth beyond the area receiving the

whitening gel and should be 2 mm thick.

14 English

16 Remove the cap from the room temperature

whitening gel syringe. Attach the mixing tip

by aligning the marking and secure it by

turning it one quarter turn clockwise. Using

the blue brush provided, apply whitening gel

to the patient's teeth (1 - 2 mm thick).

Use caution not to disturb the barrier

material. Gingival irritation can occur with

prolonged exposure to the whitening gel.

Note: A small air gap or bubbles in the

syringe due to degassing of the whitening

gel is normal. If the air gap is near the front

of the syringe, purge until both sides of the

barrel extrude gel.

Note: A slight yellow or pink coloring of

the whitening gel is a normal occurrence

from the manufacturing process. There is

no impact on the peroxide content, other

chemical properties, or performance of the

whitening gel. It will not discolor the patient’s

teeth.

17 Once the whitening gel application is

complete, raise the back of the chair so

the patient is in a slightly reclined position

(-45 degree angle) and able to swallow

comfortably while maintaining light pressure

on the bite block.

Note: The light guide is designed to ensure

proper distance and alignment to maintain

correct light exposure on the smile zone.

15English

18 Slide the LED Accelerator into place next to

the patient. The arm of the LED accelerator

should be movable, but stable. Position the

LED Accelerator head by aligning the slots

on the light guide with the retractor.

19 Follow the prompts on the display panel to

switch on the light and to activate the timer.

Once the light is on, a countdown is

displayed. Light emits from where the arrow

points. Light emits from the LED accelerator

head to shine on the patient's teeth.

It is normal for the light to icker for the rst

few seconds.

The LED Accelerator beeps once when three

minutes of the session are remaining and

beeps three times in the nal three seconds

of the 15-minute session.

When the session is nished, the light goes

out and you hear a long beep.

Note: If a session must be interrupted, press

the 'Pause' button. The remaining session

time ashes on the display. To reactivate

the session, press either the 'Pause' or 'Start'

button.

20 Inform the patient that the progress of each

session are tracked by four white lights on

top of the LED Accelerator head. Each light

indicates one quarter of a session.

Note: During each 15-minute session,

make sure the patient has a means of

communication (e.g. a bell) or do not leave

the patient unattended.

21 After each session, gently pull the LED

Accelerator away from the patient, taking

care not to dislodge isolation materials.

Note: At the end of each 15-minute session,

the display indicates the number of remaining

sessions left on the light guide. Press ‚Start‘ to

activate the light for the next session.

16 English

22 Carefully remove the whitening gel with the

surgical suction tip and/or wipe the surface

of enamel clean with damp gauze. Do not

irrigate as the force of the water may pull the

dam loose and saturate isolation materials.

23 Check the isolation materials to make sure

'no pink' tissue is visible. Replace or add

isolation if needed.

24 Follow the same instructions as above for

the remaining sessions.

25 When all sessions on a light guide are

nished, the display reads 'Sessions

Complete' for three seconds, followed by

'Guide Status – Replace Guide. Detach the

light guide from the IsoPrep retractor and

pull the LED Accelerator away from the

patient.

Note: For sensitive patients, lower the

intensity of the LED Accelerator. However,

please note this could result in a fourth

15-minute session.

Tip: If the patient notes tooth sensitivity,

place Relief ACP (found in the procedure kit

or in the patient’s Post Care & Maintenance

kit) on the lingual surface(s) for the remaining

sessions. After the last session is complete,

detach the light guide from the retractor

and pull the LED Accelerator away from the

patient. Suction or wipe the whitening gel

from the teeth. Moisten gauze and cotton

rolls and remove the isolation materials.

If barrier material remains interproximally,

remove it with oss.

26 Reinsert the retractor and take a retracted

'after' photo with the lighter shade tab

in place. Measure the shade change by

counting the shade shift according to the

value-ordered shade guide.

17English

Maximizing results

Advise the patient not to consume coee, tea,

red wine and tobacco for two hours after the

whitening treatment, until the salivary pellicle

reforms on the teeth.

All tooth whitening requires maintenance.

The patient may choose to have the whitening

treatment again or to use a maintenance

product 1-3 nights every 4-6 months,

depending on their habits.

At home post care and maintenance

Sensitivity relief

Philips Relief ACP oral gel has been shown

to decrease tooth sensitivity. Place Relief

ACP oral care gel into the take-home trays

and set on patient. Normal wear time is

10–30 minutes once per day. If the tray is not

available, brush the product on the teeth. Do

not spit for approximately 3 minutes. For the

best results, do not drink or eat for 30 minutes

after application. See the Relief ACP oral gel

instructions for use for complete instructions.

At home whitening maintenance

24 hours after the whitening treatment, the

patient may use NiteWhite or DayWhite

Whitening Gel to maintain or further enhance

their results. See the Zoom! NiteWhite/

DayWhite patient instructions for use for

complete instructions.

Storage instructions

Whitening gel should be stored at 2 °C - 10 °C.

Storage temperature above 10 °C will result in

reduced shelf life.

18 English

Herstellungsinformationen

Hersteller:

Discus Dental, LLC

1700A South Baker Avenue

Ontario, CA 91761 USA

philipsoralhealthcare.com

EMERGO EUROPE

Prinsessegracht 20

2514 AP Den Haag

Niederlande

VITA ist ein eingetragenes Warenzeichen der

VITA ZAHNFABRIK, H. Rauter GmbH & KG,

Bad Säckingen, Deutschland.

Symbole

Konsultieren Sie die Gebrauchsanweisungen

Verweis auf beiliegende oder angehängte

Informationen

Achtung

Kühl und vor Licht geschützt aufbewahren

Temperaturbereich

Europäische Konformität

19Deutsch

Hersteller

Haltbar bis

Chargennummer

Katalognummer

Zugelassen in der Europäischen Gemeinschaft

Verwenden Sie das Produkt nicht mehrmals. Dieses

Produkt ist zur Verwendung für einen einzigen

Patienten während einer Sitzung vorgesehen.

Kühl aufbewahren

Wichtige Informationen

Lesen Sie die Informationen in dieser

Gebrauchsanweisung sowie in der

Gebrauchsanweisung von Philips Zoom! und

stellen Sie sicher, dass Sie sie verstehen.

Light-Accelerated Tooth Whitening Gel

(Zahnaufhellungsgel) vor dem Beginn der

Aufhellungsbehandlung.

Das Aufhellungsgel muss vor dem Auftragen auf

die Zähne des Patienten aus dem Kühlschrank

genommen und auf Raumtemperatur erwärmt

werden, damit es verdickt wird. Entweder:

- Nehmen Sie die Spritze mindestens 6 Stunden

vor der Anwendung (vorzugsweise am Abend

vor der Behandlung) aus dem Kühlschrank.

2

REFRIGERATE

20 Deutsch

La page charge ...

Zoom DIS570/01 Manuel utilisateur

Zoom DIS570/01 Manuel utilisateur

dans d''autres langues

Autres documents