Behringer ULTRALINK ULM202USB Guide de démarrage rapide

Marque: Behringer

Modèle: ULTRALINK ULM202USB

Catégorie: Microphones

Taper: Guide de démarrage rapide

Ce manuel convient également à

ULTRALINK ULM200USB

Quick Start Guide

ULTRALINK

ULM200USB/ULM202USB

High-Performance 2.4 GHz Digital Wireless

System with Handheld Microphone(s) and

Dual-Mode USB Receiver

ULM200USB/ULM202USB

Hook-Up

XENYX QX2442USB

Laptop

B115MP3

ULM200USB/ULM202USB

Controls

ULM200USB/ULM202USB Controls

1. POWER/STATUS LED

2. W VOLUME Button (Mute/volume down)

3. V VOLUME Button (Power on/unmute/volume up)

4. USB connector

5. Wireless Link Status LED

ULM200USB/ULM202USB Getting Started

1. Connect the ULM200D wireless receiver to the “WIRELESS

ONLY!” USB connector on wireless-enabled BEHRIINGER mixers,

powered speakers or other compatible products, or to a USB

port on a computer.

2. Press and hold the

button on the ULM200M wireless

microphone to connect wirelessly to the ULM200D receiver.

The LED on the microphone will  ash slowly during the

connecting sequence and will light solid once connected.

If the ULM200M wireless microphone cannot connect to a

receiver, the microphone will automatically power down after

10 seconds.

3. Once connected, the ULM200M microphone will be set at

a medium volume. Use the

and

buttons to adjust

the volume

4. A long press of the

button will put the ULM200M

microphone into mute. The mute condition is indicated by

rapid  ashing of the LED. If the user does not unmute within

60 seconds, the ULM200M microphone will power down to

save battery life.

5. A short press of the

button will unmute the ULM200M

microphone. If the ULM200M microphone is unmuted more

than 10 seconds after muting, it will return to the previous

volume level, if unmuted after less than 10 seconds it will be

set to the minimum volume level.

6. Unplug the ULM200D wireless receiver to power down.

The ULM200M wireless microphone will power down

10 seconds after the ULM200D wireless receiver is unplugged.

7. The LED in the ULM200M wireless microphone will indicate

when the battery is low by regular brief  ashes.

8. Should the ULM200M wireless microphone become unpaired

with the ULM200D wireless receiver, the microphone can be

re-paired from the powered down state by simultaneously

pressing the

and

buttons and moving the microphone

to within 10 cm (4 inches) of the ULM200D wireless receiver.

The LED on the microphone will  ash slowly during the pairing

sequence and will light solid once connected. If the ULM200M

wireless microphone cannot pair to the receiver it will

automatically power down after 10 seconds.

(1)

(2) (3)

(5)(4)

Model: ULM200D

Type of product: Wireless Microphone

Model: ULM200M

Speci cation

RF output <20 dBm (100 mW)

Operating range 120 m (Line of Sight)*

Dynamic range 92 dB, A-weighted**

Equivalent input noise -112 dBu

Frequency Response 20 Hz - 20 kHz, ±1 dB**

(Wireless Link)

Sampling rate 48 kHz

Resolution 24-bit

Encoding 232 kbps SLAC (Slightly

Lossy Audio Codec)

Latency 14.5 ms

RF frequency 2.4 GHz ISM band

(2406 MHz - 2474 MHz),

18 channels

USB current consumption 70 mA @ 5 VDC

Battery type 2 x AA (LR6)

Alkaline cells

Battery life 30 hours

Dimensions (W x D x H) 45.7 x 45.7 x 243.8 mm

(1.8 x 1.8 x 9.6")

Weight

ULM200USB 0.2 kg (0.4 lbs)

ULM202USB 0.4 kg (0.9 lbs)

*Achievable range will be dependent on nearby sources of RF interference and/

or line of sight obstacles.

**Measured from analog input to analog output, unity gain operation without

wireless compression.

LEGAL DISCLAIMER

MUSIC Group accepts no liability for any loss which may be

su ered by any person who relies either wholly or in part upon

any description, photograph, or statement contained herein.

Technical speci cations, appearances and other information

are subject to change without notice. All trademarks are the

property of their respective owners. MIDAS, KLARK TEKNIK,

TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or

registered trademarks of MUSIC Group IP Ltd. © MUSIC Group IP

LIMITED WARRANTY

For the applicable warranty terms and conditions

and additional information regarding MUSIC Group’s

Limited Warranty, please see complete details online at

music-group.com/warranty.

NEGACIÓN LEGAL

MUSIC Group no admite ningún tipo de responsabilidad por

cualquier daño o pérdida que pudiera sufrir cualquier persona

por con ar total o parcialmente en la descripciones, fotografías o

a rmaciones contenidas en este documento. Las especi caciones

técnicas, imágenes y otras informaciones contenidas en este

documento están sujetas a modi caciones sin previo aviso.

Todas las marcas comerciales que aparecen aquí son propiedad

de sus respectivos dueños. MIDAS, KLARK TEKNIK, TURBOSOUND,

BEHRINGER, BUGERA y DDA son marcas comerciales o marcas

registradas de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.

2015 Reservados todos los derechos.

GARANTÍA LIMITADA

Si quiere conocer los detalles y condiciones aplicables de la

garantía así como información adicional sobre la Garantía

limitada de MUSIC group, consulte online toda la información

en la web music-group.com/warranty.

DÉNI LÉGAL

MUSIC Group ne peut être tenu pour responsable pour toute

perte pouvant être subie par toute personne se  ant en partie

ou en totalité à toute description, photographie ou a rmation

contenue dans ce document. Les caractéristiques, l’apparence

et d’autres informations peuvent faire l’objet de modi cations

sans noti cation. Toutes les marques appartiennent à leurs

propriétaires respectifs. MIDAS, KLARK TEKNIK, TURBOSOUND,

BEHRINGER, BUGERA et DDA sont des marques ou marques

déposées de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.

GARANTIE LIMITÉE

Pour connaître les termes et conditions de garantie applicables,

ainsi que les informations supplémentaires et détaillées sur

la Garantie Limitée de MUSIC Group, consultez le site Internet

music-group.com/warranty.

FEDERAL COMMUNICATIONS

COMMISSION COMPLIANCE

INFORMATION

Responsible Party Name:

MUSIC Group Services NV Inc.

Address: 5270 Procyon Street

Las Vegas, NV 89118

USA

Phone Number: +1 702 800 8290

ULTRALINK ULM200USB/ULM202USB

complies with the FCC rules as mentioned in the

followingparagraph:

This equipment has been tested and found to comply with the limits

for a ClassB digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the

interference by one or more of the followingmeasures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit di erent from

that to which the receiver is connected

•

Consult the dealer or an experienced radio/TV technician

forhelp

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Important information:

Changes or modi cations to the equipment not expressly approved by

MUSIC Group can void the user’s authority to use the equipment.

RF EXPOSURE:

This equipment meets the government's requirements for

exposure to radio waves, and has been tested and meets the FCC RF

exposure guidelines.

The highest SAR value (1g) for this ULM200D Receiver is 0.649 W/kg.

The highest SAR value (1g) for this ULM200M wireless microphone

is 0.774 W/kg.

This equipment complies with the European Council

Recommendation of 12 July 1999 on the Limitation of Exposure of

the General Public to Electromagnetic Fields [1999/519/EC].

Operation in the 2.4 GHz ISM (Industrial, Scienti c, Medical)

frequency band may be subject to interference from other

transmitting equipment operating in this band. In the event of such

interference, please verify and reassign the transmitting channels

of any potentially interfering transmitting equipment.

ULTRALINK

ULM200USB/ULM202USB

We Hear You

Product Information Document

High-Performance 2.4 GHz Digital Wireless

System with 2 Handheld Microphones and

Dual-Mode USB Receiver

Wireless Microphone Systems

Package of 2 ULM200M handheld

microphones and ULM200D

dual-mode USB receiver

High-quality microphone capsule

for dedicated vocal applications

Ultra-compact USB receiver

with dual mode analog/digital

audio interface

Digital 2.4 GHz wireless connectivity

o ers superior sound quality

Maximum range 120 m

Automatic pairing for easy and

intuitive setup

Integrated volume up and down

buttons on handheld microphone

Panic mute feature on microphone

Receiver powered via USB interface

Auto-sensing of analog or USB

digital audio connection

2.4 GHz ISM band operation

allows license-free use on a

worldwide basis

3-Year Warranty Program*

Conceived and designed by

BEHRINGER Germany

*Warranty details can be found at music-group.com.

Once again we broke the a ordability

barrier – with our new ULTRALINK

ULM202USB Wireless Microphone

System. Now you are free to work

the room to your heart’s content,

without the hassle and restriction of

cables underfoot. Highest-quality

sound is provided by the 2 dynamic

hand-held mics thanks to their built-

in transmitter, which operates in

the license-free 2.4 GHz range. The

dedicated ULM receiver not only connects to your PC/Mac computer’s

USB port for recording directly into your favorite DAW application,

but also works with a wide range of BEHRINGER “Wireless-Ready” mixers

and powered speakers – for the ultimate in versatility.

Interference-Free Performance

Our state-of-the-art transmitters and receivers

operate in the 2.4 GHz frequency band,

which is well out of the way of TV stations and

cell phone towers, two of the main culprits that

wreak havoc in the wireless zone. And because

it is digitally encrypted, your signal gets

through in all its pristine, high-de nition

quality, without the random artifacts that

often plague other wireless systems.

2 of 4

Product Information Document

High-Performance 2.4 GHz Digital Wireless

System with 2 Handheld Microphones and

Dual-Mode USB Receiver

Wireless Microphone Systems

Extended Battery Life

Replacing batteries in wireless mics can get expensive really fast – and having them die in the

middle of your set can be a real showstopper! That’s why we devoted extra time in developing the

ULM202USB to ensure that battery life was extended as much as possible. You get an honest 30 hours

performance time from a pair of AA alkaline batteries, which are available virtually anywhere on

the planet.

Convenient Control

We wanted the ULM202USB to be ultra-easy to operate, so we gave each mic easy-to-understand

and operate Volume buttons right on the microphone body. And should you accidentally wander

into the “Feedback Zone”, we included a handy Panic Mute function that engages when you press

and hold the Volume Down button.

Ready for the World

Operating in the 2.4 GHz band allows your ULM202USB Wireless Microphone System to be used

across the globe without any special licensing requirements.

3 of 4

3 o

f 4

Product Information Document

High-Performance 2.4 GHz Digital Wireless

System with 2 Handheld Microphones and

Dual-Mode USB Receiver

Wireless Microphone Systems

Extraordinary Value

The ULM202USB Wireless Microphone System is only available from BEHRINGER, the premier audio

manufacturer recognized worldwide for outstanding build quality and exceptional value. Visit your

local authorized dealer today and see just how easy – and a ordable it is to hop on the ULM202USB

wireless bandwagon.

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our

own MUSIC Group factory using state-of-the-art automation, enhanced production work ows and

quality assurance labs with the most sophisticated test equipment available in the world. As a result,

we have one of the lowest product failure rates in the industry, and we con dently back it up with a

generous 3-Year Warranty program.

For service, support or more information contact the BEHRINGER location nearest you:

Europe

MUSIC Group Services UK

Tel: +44 156 273 2290

Email: [email protected]

USA/Canada

MUSIC Group Services NV Inc.

Tel: +1 702 800 8290

Email: [email protected]

Japan

MUSIC Group Services JP K.K.

Tel.: +81 3 6231 0454

Email: [email protected]

MUSIC Group accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.

Technical speci cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,

LAB.GRUPPEN, LAKE, TANNOY, TURBOSOUND, TC ELECTRONIC, TC-HELICON, BEHRINGER, BUGERA, DDA and TC APPLIED TECHNOLOGIES are trademarks or registered trademarks of

For service, support or more information contact the BEHRINGER location nearest you:

Europe

MUSIC Grou

Services UK

Te l

+44 1

Email: CARE@music-

roup.com

USA

Canada

MUSIC Grou

Services NV Inc.